report writing in research methods

Scientific Reports

What this handout is about.

This handout provides a general guide to writing reports about scientific research you’ve performed. In addition to describing the conventional rules about the format and content of a lab report, we’ll also attempt to convey why these rules exist, so you’ll get a clearer, more dependable idea of how to approach this writing situation. Readers of this handout may also find our handout on writing in the sciences useful.

Background and pre-writing

Why do we write research reports.

You did an experiment or study for your science class, and now you have to write it up for your teacher to review. You feel that you understood the background sufficiently, designed and completed the study effectively, obtained useful data, and can use those data to draw conclusions about a scientific process or principle. But how exactly do you write all that? What is your teacher expecting to see?

To take some of the guesswork out of answering these questions, try to think beyond the classroom setting. In fact, you and your teacher are both part of a scientific community, and the people who participate in this community tend to share the same values. As long as you understand and respect these values, your writing will likely meet the expectations of your audience—including your teacher.

So why are you writing this research report? The practical answer is “Because the teacher assigned it,” but that’s classroom thinking. Generally speaking, people investigating some scientific hypothesis have a responsibility to the rest of the scientific world to report their findings, particularly if these findings add to or contradict previous ideas. The people reading such reports have two primary goals:

• They want to gather the information presented.
• They want to know that the findings are legitimate.

Your job as a writer, then, is to fulfill these two goals.

How do I do that?

Good question. Here is the basic format scientists have designed for research reports:

• Introduction

Methods and Materials

This format, sometimes called “IMRAD,” may take slightly different shapes depending on the discipline or audience; some ask you to include an abstract or separate section for the hypothesis, or call the Discussion section “Conclusions,” or change the order of the sections (some professional and academic journals require the Methods section to appear last). Overall, however, the IMRAD format was devised to represent a textual version of the scientific method.

The scientific method, you’ll probably recall, involves developing a hypothesis, testing it, and deciding whether your findings support the hypothesis. In essence, the format for a research report in the sciences mirrors the scientific method but fleshes out the process a little. Below, you’ll find a table that shows how each written section fits into the scientific method and what additional information it offers the reader.

Thinking of your research report as based on the scientific method, but elaborated in the ways described above, may help you to meet your audience’s expectations successfully. We’re going to proceed by explicitly connecting each section of the lab report to the scientific method, then explaining why and how you need to elaborate that section.

Although this handout takes each section in the order in which it should be presented in the final report, you may for practical reasons decide to compose sections in another order. For example, many writers find that composing their Methods and Results before the other sections helps to clarify their idea of the experiment or study as a whole. You might consider using each assignment to practice different approaches to drafting the report, to find the order that works best for you.

What should I do before drafting the lab report?

The best way to prepare to write the lab report is to make sure that you fully understand everything you need to about the experiment. Obviously, if you don’t quite know what went on during the lab, you’re going to find it difficult to explain the lab satisfactorily to someone else. To make sure you know enough to write the report, complete the following steps:

• What are we going to do in this lab? (That is, what’s the procedure?)
• Why are we going to do it that way?
• What are we hoping to learn from this experiment?
• Why would we benefit from this knowledge?
• Consult your lab supervisor as you perform the lab. If you don’t know how to answer one of the questions above, for example, your lab supervisor will probably be able to explain it to you (or, at least, help you figure it out).
• Plan the steps of the experiment carefully with your lab partners. The less you rush, the more likely it is that you’ll perform the experiment correctly and record your findings accurately. Also, take some time to think about the best way to organize the data before you have to start putting numbers down. If you can design a table to account for the data, that will tend to work much better than jotting results down hurriedly on a scrap piece of paper.
• Record the data carefully so you get them right. You won’t be able to trust your conclusions if you have the wrong data, and your readers will know you messed up if the other three people in your group have “97 degrees” and you have “87.”
• Consult with your lab partners about everything you do. Lab groups often make one of two mistakes: two people do all the work while two have a nice chat, or everybody works together until the group finishes gathering the raw data, then scrams outta there. Collaborate with your partners, even when the experiment is “over.” What trends did you observe? Was the hypothesis supported? Did you all get the same results? What kind of figure should you use to represent your findings? The whole group can work together to answer these questions.
• Consider your audience. You may believe that audience is a non-issue: it’s your lab TA, right? Well, yes—but again, think beyond the classroom. If you write with only your lab instructor in mind, you may omit material that is crucial to a complete understanding of your experiment, because you assume the instructor knows all that stuff already. As a result, you may receive a lower grade, since your TA won’t be sure that you understand all the principles at work. Try to write towards a student in the same course but a different lab section. That student will have a fair degree of scientific expertise but won’t know much about your experiment particularly. Alternatively, you could envision yourself five years from now, after the reading and lectures for this course have faded a bit. What would you remember, and what would you need explained more clearly (as a refresher)?

Once you’ve completed these steps as you perform the experiment, you’ll be in a good position to draft an effective lab report.

Introductions

How do i write a strong introduction.

For the purposes of this handout, we’ll consider the Introduction to contain four basic elements: the purpose, the scientific literature relevant to the subject, the hypothesis, and the reasons you believed your hypothesis viable. Let’s start by going through each element of the Introduction to clarify what it covers and why it’s important. Then we can formulate a logical organizational strategy for the section.

The inclusion of the purpose (sometimes called the objective) of the experiment often confuses writers. The biggest misconception is that the purpose is the same as the hypothesis. Not quite. We’ll get to hypotheses in a minute, but basically they provide some indication of what you expect the experiment to show. The purpose is broader, and deals more with what you expect to gain through the experiment. In a professional setting, the hypothesis might have something to do with how cells react to a certain kind of genetic manipulation, but the purpose of the experiment is to learn more about potential cancer treatments. Undergraduate reports don’t often have this wide-ranging a goal, but you should still try to maintain the distinction between your hypothesis and your purpose. In a solubility experiment, for example, your hypothesis might talk about the relationship between temperature and the rate of solubility, but the purpose is probably to learn more about some specific scientific principle underlying the process of solubility.

For starters, most people say that you should write out your working hypothesis before you perform the experiment or study. Many beginning science students neglect to do so and find themselves struggling to remember precisely which variables were involved in the process or in what way the researchers felt that they were related. Write your hypothesis down as you develop it—you’ll be glad you did.

As for the form a hypothesis should take, it’s best not to be too fancy or complicated; an inventive style isn’t nearly so important as clarity here. There’s nothing wrong with beginning your hypothesis with the phrase, “It was hypothesized that . . .” Be as specific as you can about the relationship between the different objects of your study. In other words, explain that when term A changes, term B changes in this particular way. Readers of scientific writing are rarely content with the idea that a relationship between two terms exists—they want to know what that relationship entails.

Not a hypothesis:

“It was hypothesized that there is a significant relationship between the temperature of a solvent and the rate at which a solute dissolves.”

Hypothesis:

“It was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases.”

Put more technically, most hypotheses contain both an independent and a dependent variable. The independent variable is what you manipulate to test the reaction; the dependent variable is what changes as a result of your manipulation. In the example above, the independent variable is the temperature of the solvent, and the dependent variable is the rate of solubility. Be sure that your hypothesis includes both variables.

Justify your hypothesis

You need to do more than tell your readers what your hypothesis is; you also need to assure them that this hypothesis was reasonable, given the circumstances. In other words, use the Introduction to explain that you didn’t just pluck your hypothesis out of thin air. (If you did pluck it out of thin air, your problems with your report will probably extend beyond using the appropriate format.) If you posit that a particular relationship exists between the independent and the dependent variable, what led you to believe your “guess” might be supported by evidence?

Scientists often refer to this type of justification as “motivating” the hypothesis, in the sense that something propelled them to make that prediction. Often, motivation includes what we already know—or rather, what scientists generally accept as true (see “Background/previous research” below). But you can also motivate your hypothesis by relying on logic or on your own observations. If you’re trying to decide which solutes will dissolve more rapidly in a solvent at increased temperatures, you might remember that some solids are meant to dissolve in hot water (e.g., bouillon cubes) and some are used for a function precisely because they withstand higher temperatures (they make saucepans out of something). Or you can think about whether you’ve noticed sugar dissolving more rapidly in your glass of iced tea or in your cup of coffee. Even such basic, outside-the-lab observations can help you justify your hypothesis as reasonable.

Background/previous research

This part of the Introduction demonstrates to the reader your awareness of how you’re building on other scientists’ work. If you think of the scientific community as engaging in a series of conversations about various topics, then you’ll recognize that the relevant background material will alert the reader to which conversation you want to enter.

Generally speaking, authors writing journal articles use the background for slightly different purposes than do students completing assignments. Because readers of academic journals tend to be professionals in the field, authors explain the background in order to permit readers to evaluate the study’s pertinence for their own work. You, on the other hand, write toward a much narrower audience—your peers in the course or your lab instructor—and so you must demonstrate that you understand the context for the (presumably assigned) experiment or study you’ve completed. For example, if your professor has been talking about polarity during lectures, and you’re doing a solubility experiment, you might try to connect the polarity of a solid to its relative solubility in certain solvents. In any event, both professional researchers and undergraduates need to connect the background material overtly to their own work.

Organization of this section

Most of the time, writers begin by stating the purpose or objectives of their own work, which establishes for the reader’s benefit the “nature and scope of the problem investigated” (Day 1994). Once you have expressed your purpose, you should then find it easier to move from the general purpose, to relevant material on the subject, to your hypothesis. In abbreviated form, an Introduction section might look like this:

“The purpose of the experiment was to test conventional ideas about solubility in the laboratory [purpose] . . . According to Whitecoat and Labrat (1999), at higher temperatures the molecules of solvents move more quickly . . . We know from the class lecture that molecules moving at higher rates of speed collide with one another more often and thus break down more easily [background material/motivation] . . . Thus, it was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases [hypothesis].”

Again—these are guidelines, not commandments. Some writers and readers prefer different structures for the Introduction. The one above merely illustrates a common approach to organizing material.

How do I write a strong Materials and Methods section?

As with any piece of writing, your Methods section will succeed only if it fulfills its readers’ expectations, so you need to be clear in your own mind about the purpose of this section. Let’s review the purpose as we described it above: in this section, you want to describe in detail how you tested the hypothesis you developed and also to clarify the rationale for your procedure. In science, it’s not sufficient merely to design and carry out an experiment. Ultimately, others must be able to verify your findings, so your experiment must be reproducible, to the extent that other researchers can follow the same procedure and obtain the same (or similar) results.

Here’s a real-world example of the importance of reproducibility. In 1989, physicists Stanley Pons and Martin Fleischman announced that they had discovered “cold fusion,” a way of producing excess heat and power without the nuclear radiation that accompanies “hot fusion.” Such a discovery could have great ramifications for the industrial production of energy, so these findings created a great deal of interest. When other scientists tried to duplicate the experiment, however, they didn’t achieve the same results, and as a result many wrote off the conclusions as unjustified (or worse, a hoax). To this day, the viability of cold fusion is debated within the scientific community, even though an increasing number of researchers believe it possible. So when you write your Methods section, keep in mind that you need to describe your experiment well enough to allow others to replicate it exactly.

With these goals in mind, let’s consider how to write an effective Methods section in terms of content, structure, and style.

Sometimes the hardest thing about writing this section isn’t what you should talk about, but what you shouldn’t talk about. Writers often want to include the results of their experiment, because they measured and recorded the results during the course of the experiment. But such data should be reserved for the Results section. In the Methods section, you can write that you recorded the results, or how you recorded the results (e.g., in a table), but you shouldn’t write what the results were—not yet. Here, you’re merely stating exactly how you went about testing your hypothesis. As you draft your Methods section, ask yourself the following questions:

• How much detail? Be precise in providing details, but stay relevant. Ask yourself, “Would it make any difference if this piece were a different size or made from a different material?” If not, you probably don’t need to get too specific. If so, you should give as many details as necessary to prevent this experiment from going awry if someone else tries to carry it out. Probably the most crucial detail is measurement; you should always quantify anything you can, such as time elapsed, temperature, mass, volume, etc.
• Rationale: Be sure that as you’re relating your actions during the experiment, you explain your rationale for the protocol you developed. If you capped a test tube immediately after adding a solute to a solvent, why did you do that? (That’s really two questions: why did you cap it, and why did you cap it immediately?) In a professional setting, writers provide their rationale as a way to explain their thinking to potential critics. On one hand, of course, that’s your motivation for talking about protocol, too. On the other hand, since in practical terms you’re also writing to your teacher (who’s seeking to evaluate how well you comprehend the principles of the experiment), explaining the rationale indicates that you understand the reasons for conducting the experiment in that way, and that you’re not just following orders. Critical thinking is crucial—robots don’t make good scientists.
• Control: Most experiments will include a control, which is a means of comparing experimental results. (Sometimes you’ll need to have more than one control, depending on the number of hypotheses you want to test.) The control is exactly the same as the other items you’re testing, except that you don’t manipulate the independent variable-the condition you’re altering to check the effect on the dependent variable. For example, if you’re testing solubility rates at increased temperatures, your control would be a solution that you didn’t heat at all; that way, you’ll see how quickly the solute dissolves “naturally” (i.e., without manipulation), and you’ll have a point of reference against which to compare the solutions you did heat.

Describe the control in the Methods section. Two things are especially important in writing about the control: identify the control as a control, and explain what you’re controlling for. Here is an example:

“As a control for the temperature change, we placed the same amount of solute in the same amount of solvent, and let the solution stand for five minutes without heating it.”

Structure and style

Organization is especially important in the Methods section of a lab report because readers must understand your experimental procedure completely. Many writers are surprised by the difficulty of conveying what they did during the experiment, since after all they’re only reporting an event, but it’s often tricky to present this information in a coherent way. There’s a fairly standard structure you can use to guide you, and following the conventions for style can help clarify your points.

• Subsections: Occasionally, researchers use subsections to report their procedure when the following circumstances apply: 1) if they’ve used a great many materials; 2) if the procedure is unusually complicated; 3) if they’ve developed a procedure that won’t be familiar to many of their readers. Because these conditions rarely apply to the experiments you’ll perform in class, most undergraduate lab reports won’t require you to use subsections. In fact, many guides to writing lab reports suggest that you try to limit your Methods section to a single paragraph.
• Narrative structure: Think of this section as telling a story about a group of people and the experiment they performed. Describe what you did in the order in which you did it. You may have heard the old joke centered on the line, “Disconnect the red wire, but only after disconnecting the green wire,” where the person reading the directions blows everything to kingdom come because the directions weren’t in order. We’re used to reading about events chronologically, and so your readers will generally understand what you did if you present that information in the same way. Also, since the Methods section does generally appear as a narrative (story), you want to avoid the “recipe” approach: “First, take a clean, dry 100 ml test tube from the rack. Next, add 50 ml of distilled water.” You should be reporting what did happen, not telling the reader how to perform the experiment: “50 ml of distilled water was poured into a clean, dry 100 ml test tube.” Hint: most of the time, the recipe approach comes from copying down the steps of the procedure from your lab manual, so you may want to draft the Methods section initially without consulting your manual. Later, of course, you can go back and fill in any part of the procedure you inadvertently overlooked.
• Past tense: Remember that you’re describing what happened, so you should use past tense to refer to everything you did during the experiment. Writers are often tempted to use the imperative (“Add 5 g of the solid to the solution”) because that’s how their lab manuals are worded; less frequently, they use present tense (“5 g of the solid are added to the solution”). Instead, remember that you’re talking about an event which happened at a particular time in the past, and which has already ended by the time you start writing, so simple past tense will be appropriate in this section (“5 g of the solid were added to the solution” or “We added 5 g of the solid to the solution”).
• Active: We heated the solution to 80°C. (The subject, “we,” performs the action, heating.)
• Passive: The solution was heated to 80°C. (The subject, “solution,” doesn’t do the heating–it is acted upon, not acting.)

Increasingly, especially in the social sciences, using first person and active voice is acceptable in scientific reports. Most readers find that this style of writing conveys information more clearly and concisely. This rhetorical choice thus brings two scientific values into conflict: objectivity versus clarity. Since the scientific community hasn’t reached a consensus about which style it prefers, you may want to ask your lab instructor.

How do I write a strong Results section?

Here’s a paradox for you. The Results section is often both the shortest (yay!) and most important (uh-oh!) part of your report. Your Materials and Methods section shows how you obtained the results, and your Discussion section explores the significance of the results, so clearly the Results section forms the backbone of the lab report. This section provides the most critical information about your experiment: the data that allow you to discuss how your hypothesis was or wasn’t supported. But it doesn’t provide anything else, which explains why this section is generally shorter than the others.

Before you write this section, look at all the data you collected to figure out what relates significantly to your hypothesis. You’ll want to highlight this material in your Results section. Resist the urge to include every bit of data you collected, since perhaps not all are relevant. Also, don’t try to draw conclusions about the results—save them for the Discussion section. In this section, you’re reporting facts. Nothing your readers can dispute should appear in the Results section.

Most Results sections feature three distinct parts: text, tables, and figures. Let’s consider each part one at a time.

This should be a short paragraph, generally just a few lines, that describes the results you obtained from your experiment. In a relatively simple experiment, one that doesn’t produce a lot of data for you to repeat, the text can represent the entire Results section. Don’t feel that you need to include lots of extraneous detail to compensate for a short (but effective) text; your readers appreciate discrimination more than your ability to recite facts. In a more complex experiment, you may want to use tables and/or figures to help guide your readers toward the most important information you gathered. In that event, you’ll need to refer to each table or figure directly, where appropriate:

“Table 1 lists the rates of solubility for each substance”

“Solubility increased as the temperature of the solution increased (see Figure 1).”

If you do use tables or figures, make sure that you don’t present the same material in both the text and the tables/figures, since in essence you’ll just repeat yourself, probably annoying your readers with the redundancy of your statements.

Feel free to describe trends that emerge as you examine the data. Although identifying trends requires some judgment on your part and so may not feel like factual reporting, no one can deny that these trends do exist, and so they properly belong in the Results section. Example:

“Heating the solution increased the rate of solubility of polar solids by 45% but had no effect on the rate of solubility in solutions containing non-polar solids.”

This point isn’t debatable—you’re just pointing out what the data show.

As in the Materials and Methods section, you want to refer to your data in the past tense, because the events you recorded have already occurred and have finished occurring. In the example above, note the use of “increased” and “had,” rather than “increases” and “has.” (You don’t know from your experiment that heating always increases the solubility of polar solids, but it did that time.)

You shouldn’t put information in the table that also appears in the text. You also shouldn’t use a table to present irrelevant data, just to show you did collect these data during the experiment. Tables are good for some purposes and situations, but not others, so whether and how you’ll use tables depends upon what you need them to accomplish.

Tables are useful ways to show variation in data, but not to present a great deal of unchanging measurements. If you’re dealing with a scientific phenomenon that occurs only within a certain range of temperatures, for example, you don’t need to use a table to show that the phenomenon didn’t occur at any of the other temperatures. How useful is this table?

As you can probably see, no solubility was observed until the trial temperature reached 50°C, a fact that the text part of the Results section could easily convey. The table could then be limited to what happened at 50°C and higher, thus better illustrating the differences in solubility rates when solubility did occur.

As a rule, try not to use a table to describe any experimental event you can cover in one sentence of text. Here’s an example of an unnecessary table from How to Write and Publish a Scientific Paper , by Robert A. Day:

As Day notes, all the information in this table can be summarized in one sentence: “S. griseus, S. coelicolor, S. everycolor, and S. rainbowenski grew under aerobic conditions, whereas S. nocolor and S. greenicus required anaerobic conditions.” Most readers won’t find the table clearer than that one sentence.

When you do have reason to tabulate material, pay attention to the clarity and readability of the format you use. Here are a few tips:

• Number your table. Then, when you refer to the table in the text, use that number to tell your readers which table they can review to clarify the material.
• Give your table a title. This title should be descriptive enough to communicate the contents of the table, but not so long that it becomes difficult to follow. The titles in the sample tables above are acceptable.
• Arrange your table so that readers read vertically, not horizontally. For the most part, this rule means that you should construct your table so that like elements read down, not across. Think about what you want your readers to compare, and put that information in the column (up and down) rather than in the row (across). Usually, the point of comparison will be the numerical data you collect, so especially make sure you have columns of numbers, not rows.Here’s an example of how drastically this decision affects the readability of your table (from A Short Guide to Writing about Chemistry , by Herbert Beall and John Trimbur). Look at this table, which presents the relevant data in horizontal rows:

It’s a little tough to see the trends that the author presumably wants to present in this table. Compare this table, in which the data appear vertically:

The second table shows how putting like elements in a vertical column makes for easier reading. In this case, the like elements are the measurements of length and height, over five trials–not, as in the first table, the length and height measurements for each trial.

• Make sure to include units of measurement in the tables. Readers might be able to guess that you measured something in millimeters, but don’t make them try.

• Don’t use vertical lines as part of the format for your table. This convention exists because journals prefer not to have to reproduce these lines because the tables then become more expensive to print. Even though it’s fairly unlikely that you’ll be sending your Biology 11 lab report to Science for publication, your readers still have this expectation. Consequently, if you use the table-drawing option in your word-processing software, choose the option that doesn’t rely on a “grid” format (which includes vertical lines).

How do I include figures in my report?

Although tables can be useful ways of showing trends in the results you obtained, figures (i.e., illustrations) can do an even better job of emphasizing such trends. Lab report writers often use graphic representations of the data they collected to provide their readers with a literal picture of how the experiment went.

When should you use a figure?

Remember the circumstances under which you don’t need a table: when you don’t have a great deal of data or when the data you have don’t vary a lot. Under the same conditions, you would probably forgo the figure as well, since the figure would be unlikely to provide your readers with an additional perspective. Scientists really don’t like their time wasted, so they tend not to respond favorably to redundancy.

If you’re trying to decide between using a table and creating a figure to present your material, consider the following a rule of thumb. The strength of a table lies in its ability to supply large amounts of exact data, whereas the strength of a figure is its dramatic illustration of important trends within the experiment. If you feel that your readers won’t get the full impact of the results you obtained just by looking at the numbers, then a figure might be appropriate.

Of course, an undergraduate class may expect you to create a figure for your lab experiment, if only to make sure that you can do so effectively. If this is the case, then don’t worry about whether to use figures or not—concentrate instead on how best to accomplish your task.

Figures can include maps, photographs, pen-and-ink drawings, flow charts, bar graphs, and section graphs (“pie charts”). But the most common figure by far, especially for undergraduates, is the line graph, so we’ll focus on that type in this handout.

At the undergraduate level, you can often draw and label your graphs by hand, provided that the result is clear, legible, and drawn to scale. Computer technology has, however, made creating line graphs a lot easier. Most word-processing software has a number of functions for transferring data into graph form; many scientists have found Microsoft Excel, for example, a helpful tool in graphing results. If you plan on pursuing a career in the sciences, it may be well worth your while to learn to use a similar program.

Computers can’t, however, decide for you how your graph really works; you have to know how to design your graph to meet your readers’ expectations. Here are some of these expectations:

• Keep it as simple as possible. You may be tempted to signal the complexity of the information you gathered by trying to design a graph that accounts for that complexity. But remember the purpose of your graph: to dramatize your results in a manner that’s easy to see and grasp. Try not to make the reader stare at the graph for a half hour to find the important line among the mass of other lines. For maximum effectiveness, limit yourself to three to five lines per graph; if you have more data to demonstrate, use a set of graphs to account for it, rather than trying to cram it all into a single figure.
• Plot the independent variable on the horizontal (x) axis and the dependent variable on the vertical (y) axis. Remember that the independent variable is the condition that you manipulated during the experiment and the dependent variable is the condition that you measured to see if it changed along with the independent variable. Placing the variables along their respective axes is mostly just a convention, but since your readers are accustomed to viewing graphs in this way, you’re better off not challenging the convention in your report.
• Label each axis carefully, and be especially careful to include units of measure. You need to make sure that your readers understand perfectly well what your graph indicates.
• Number and title your graphs. As with tables, the title of the graph should be informative but concise, and you should refer to your graph by number in the text (e.g., “Figure 1 shows the increase in the solubility rate as a function of temperature”).
• Many editors of professional scientific journals prefer that writers distinguish the lines in their graphs by attaching a symbol to them, usually a geometric shape (triangle, square, etc.), and using that symbol throughout the curve of the line. Generally, readers have a hard time distinguishing dotted lines from dot-dash lines from straight lines, so you should consider staying away from this system. Editors don’t usually like different-colored lines within a graph because colors are difficult and expensive to reproduce; colors may, however, be great for your purposes, as long as you’re not planning to submit your paper to Nature. Use your discretion—try to employ whichever technique dramatizes the results most effectively.
• Try to gather data at regular intervals, so the plot points on your graph aren’t too far apart. You can’t be sure of the arc you should draw between the plot points if the points are located at the far corners of the graph; over a fifteen-minute interval, perhaps the change occurred in the first or last thirty seconds of that period (in which case your straight-line connection between the points is misleading).
• If you’re worried that you didn’t collect data at sufficiently regular intervals during your experiment, go ahead and connect the points with a straight line, but you may want to examine this problem as part of your Discussion section.
• Make your graph large enough so that everything is legible and clearly demarcated, but not so large that it either overwhelms the rest of the Results section or provides a far greater range than you need to illustrate your point. If, for example, the seedlings of your plant grew only 15 mm during the trial, you don’t need to construct a graph that accounts for 100 mm of growth. The lines in your graph should more or less fill the space created by the axes; if you see that your data is confined to the lower left portion of the graph, you should probably re-adjust your scale.
• If you create a set of graphs, make them the same size and format, including all the verbal and visual codes (captions, symbols, scale, etc.). You want to be as consistent as possible in your illustrations, so that your readers can easily make the comparisons you’re trying to get them to see.

How do I write a strong Discussion section?

The discussion section is probably the least formalized part of the report, in that you can’t really apply the same structure to every type of experiment. In simple terms, here you tell your readers what to make of the Results you obtained. If you have done the Results part well, your readers should already recognize the trends in the data and have a fairly clear idea of whether your hypothesis was supported. Because the Results can seem so self-explanatory, many students find it difficult to know what material to add in this last section.

Basically, the Discussion contains several parts, in no particular order, but roughly moving from specific (i.e., related to your experiment only) to general (how your findings fit in the larger scientific community). In this section, you will, as a rule, need to:

Explain whether the data support your hypothesis

• Acknowledge any anomalous data or deviations from what you expected

Derive conclusions, based on your findings, about the process you’re studying

• Relate your findings to earlier work in the same area (if you can)

Explore the theoretical and/or practical implications of your findings

Let’s look at some dos and don’ts for each of these objectives.

This statement is usually a good way to begin the Discussion, since you can’t effectively speak about the larger scientific value of your study until you’ve figured out the particulars of this experiment. You might begin this part of the Discussion by explicitly stating the relationships or correlations your data indicate between the independent and dependent variables. Then you can show more clearly why you believe your hypothesis was or was not supported. For example, if you tested solubility at various temperatures, you could start this section by noting that the rates of solubility increased as the temperature increased. If your initial hypothesis surmised that temperature change would not affect solubility, you would then say something like,

“The hypothesis that temperature change would not affect solubility was not supported by the data.”

Note: Students tend to view labs as practical tests of undeniable scientific truths. As a result, you may want to say that the hypothesis was “proved” or “disproved” or that it was “correct” or “incorrect.” These terms, however, reflect a degree of certainty that you as a scientist aren’t supposed to have. Remember, you’re testing a theory with a procedure that lasts only a few hours and relies on only a few trials, which severely compromises your ability to be sure about the “truth” you see. Words like “supported,” “indicated,” and “suggested” are more acceptable ways to evaluate your hypothesis.

Also, recognize that saying whether the data supported your hypothesis or not involves making a claim to be defended. As such, you need to show the readers that this claim is warranted by the evidence. Make sure that you’re very explicit about the relationship between the evidence and the conclusions you draw from it. This process is difficult for many writers because we don’t often justify conclusions in our regular lives. For example, you might nudge your friend at a party and whisper, “That guy’s drunk,” and once your friend lays eyes on the person in question, she might readily agree. In a scientific paper, by contrast, you would need to defend your claim more thoroughly by pointing to data such as slurred words, unsteady gait, and the lampshade-as-hat. In addition to pointing out these details, you would also need to show how (according to previous studies) these signs are consistent with inebriation, especially if they occur in conjunction with one another. To put it another way, tell your readers exactly how you got from point A (was the hypothesis supported?) to point B (yes/no).

Acknowledge any anomalous data, or deviations from what you expected

You need to take these exceptions and divergences into account, so that you qualify your conclusions sufficiently. For obvious reasons, your readers will doubt your authority if you (deliberately or inadvertently) overlook a key piece of data that doesn’t square with your perspective on what occurred. In a more philosophical sense, once you’ve ignored evidence that contradicts your claims, you’ve departed from the scientific method. The urge to “tidy up” the experiment is often strong, but if you give in to it you’re no longer performing good science.

Sometimes after you’ve performed a study or experiment, you realize that some part of the methods you used to test your hypothesis was flawed. In that case, it’s OK to suggest that if you had the chance to conduct your test again, you might change the design in this or that specific way in order to avoid such and such a problem. The key to making this approach work, though, is to be very precise about the weakness in your experiment, why and how you think that weakness might have affected your data, and how you would alter your protocol to eliminate—or limit the effects of—that weakness. Often, inexperienced researchers and writers feel the need to account for “wrong” data (remember, there’s no such animal), and so they speculate wildly about what might have screwed things up. These speculations include such factors as the unusually hot temperature in the room, or the possibility that their lab partners read the meters wrong, or the potentially defective equipment. These explanations are what scientists call “cop-outs,” or “lame”; don’t indicate that the experiment had a weakness unless you’re fairly certain that a) it really occurred and b) you can explain reasonably well how that weakness affected your results.

If, for example, your hypothesis dealt with the changes in solubility at different temperatures, then try to figure out what you can rationally say about the process of solubility more generally. If you’re doing an undergraduate lab, chances are that the lab will connect in some way to the material you’ve been covering either in lecture or in your reading, so you might choose to return to these resources as a way to help you think clearly about the process as a whole.

This part of the Discussion section is another place where you need to make sure that you’re not overreaching. Again, nothing you’ve found in one study would remotely allow you to claim that you now “know” something, or that something isn’t “true,” or that your experiment “confirmed” some principle or other. Hesitate before you go out on a limb—it’s dangerous! Use less absolutely conclusive language, including such words as “suggest,” “indicate,” “correspond,” “possibly,” “challenge,” etc.

Relate your findings to previous work in the field (if possible)

We’ve been talking about how to show that you belong in a particular community (such as biologists or anthropologists) by writing within conventions that they recognize and accept. Another is to try to identify a conversation going on among members of that community, and use your work to contribute to that conversation. In a larger philosophical sense, scientists can’t fully understand the value of their research unless they have some sense of the context that provoked and nourished it. That is, you have to recognize what’s new about your project (potentially, anyway) and how it benefits the wider body of scientific knowledge. On a more pragmatic level, especially for undergraduates, connecting your lab work to previous research will demonstrate to the TA that you see the big picture. You have an opportunity, in the Discussion section, to distinguish yourself from the students in your class who aren’t thinking beyond the barest facts of the study. Capitalize on this opportunity by putting your own work in context.

If you’re just beginning to work in the natural sciences (as a first-year biology or chemistry student, say), most likely the work you’ll be doing has already been performed and re-performed to a satisfactory degree. Hence, you could probably point to a similar experiment or study and compare/contrast your results and conclusions. More advanced work may deal with an issue that is somewhat less “resolved,” and so previous research may take the form of an ongoing debate, and you can use your own work to weigh in on that debate. If, for example, researchers are hotly disputing the value of herbal remedies for the common cold, and the results of your study suggest that Echinacea diminishes the symptoms but not the actual presence of the cold, then you might want to take some time in the Discussion section to recapitulate the specifics of the dispute as it relates to Echinacea as an herbal remedy. (Consider that you have probably already written in the Introduction about this debate as background research.)

This information is often the best way to end your Discussion (and, for all intents and purposes, the report). In argumentative writing generally, you want to use your closing words to convey the main point of your writing. This main point can be primarily theoretical (“Now that you understand this information, you’re in a better position to understand this larger issue”) or primarily practical (“You can use this information to take such and such an action”). In either case, the concluding statements help the reader to comprehend the significance of your project and your decision to write about it.

Since a lab report is argumentative—after all, you’re investigating a claim, and judging the legitimacy of that claim by generating and collecting evidence—it’s often a good idea to end your report with the same technique for establishing your main point. If you want to go the theoretical route, you might talk about the consequences your study has for the field or phenomenon you’re investigating. To return to the examples regarding solubility, you could end by reflecting on what your work on solubility as a function of temperature tells us (potentially) about solubility in general. (Some folks consider this type of exploration “pure” as opposed to “applied” science, although these labels can be problematic.) If you want to go the practical route, you could end by speculating about the medical, institutional, or commercial implications of your findings—in other words, answer the question, “What can this study help people to do?” In either case, you’re going to make your readers’ experience more satisfying, by helping them see why they spent their time learning what you had to teach them.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

American Psychological Association. 2010. Publication Manual of the American Psychological Association . 6th ed. Washington, DC: American Psychological Association.

Beall, Herbert, and John Trimbur. 2001. A Short Guide to Writing About Chemistry , 2nd ed. New York: Longman.

Blum, Deborah, and Mary Knudson. 1997. A Field Guide for Science Writers: The Official Guide of the National Association of Science Writers . New York: Oxford University Press.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Briscoe, Mary Helen. 1996. Preparing Scientific Illustrations: A Guide to Better Posters, Presentations, and Publications , 2nd ed. New York: Springer-Verlag.

Council of Science Editors. 2014. Scientific Style and Format: The CSE Manual for Authors, Editors, and Publishers , 8th ed. Chicago & London: University of Chicago Press.

Davis, Martha. 2012. Scientific Papers and Presentations , 3rd ed. London: Academic Press.

Day, Robert A. 1994. How to Write and Publish a Scientific Paper , 4th ed. Phoenix: Oryx Press.

Porush, David. 1995. A Short Guide to Writing About Science . New York: Longman.

Williams, Joseph, and Joseph Bizup. 2017. Style: Lessons in Clarity and Grace , 12th ed. Boston: Pearson.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Research Report: Definition, Types + [Writing Guide]

One of the reasons for carrying out research is to add to the existing body of knowledge. Therefore, when conducting research, you need to document your processes and findings in a research report. 

With a research report, it is easy to outline the findings of your systematic investigation and any gaps needing further inquiry. Knowing how to create a detailed research report will prove useful when you need to conduct research.  

What is a Research Report?

A research report is a well-crafted document that outlines the processes, data, and findings of a systematic investigation. It is an important document that serves as a first-hand account of the research process, and it is typically considered an objective and accurate source of information.

In many ways, a research report can be considered as a summary of the research process that clearly highlights findings, recommendations, and other important details. Reading a well-written research report should provide you with all the information you need about the core areas of the research process.

Features of a Research Report 

So how do you recognize a research report when you see one? Here are some of the basic features that define a research report. 

• It is a detailed presentation of research processes and findings, and it usually includes tables and graphs. 
• It is written in a formal language.
• A research report is usually written in the third person.
• It is informative and based on first-hand verifiable information.
• It is formally structured with headings, sections, and bullet points.
• It always includes recommendations for future actions. 

Types of Research Report 

The research report is classified based on two things; nature of research and target audience.

Nature of Research

• Qualitative Research Report

This is the type of report written for qualitative research . It outlines the methods, processes, and findings of a qualitative method of systematic investigation. In educational research, a qualitative research report provides an opportunity for one to apply his or her knowledge and develop skills in planning and executing qualitative research projects.

A qualitative research report is usually descriptive in nature. Hence, in addition to presenting details of the research process, you must also create a descriptive narrative of the information.

• Quantitative Research Report

A quantitative research report is a type of research report that is written for quantitative research. Quantitative research is a type of systematic investigation that pays attention to numerical or statistical values in a bid to find answers to research questions. 

In this type of research report, the researcher presents quantitative data to support the research process and findings. Unlike a qualitative research report that is mainly descriptive, a quantitative research report works with numbers; that is, it is numerical in nature. 

Target Audience

Also, a research report can be said to be technical or popular based on the target audience. If you’re dealing with a general audience, you would need to present a popular research report, and if you’re dealing with a specialized audience, you would submit a technical report. 

• Technical Research Report

A technical research report is a detailed document that you present after carrying out industry-based research. This report is highly specialized because it provides information for a technical audience; that is, individuals with above-average knowledge in the field of study. 

In a technical research report, the researcher is expected to provide specific information about the research process, including statistical analyses and sampling methods. Also, the use of language is highly specialized and filled with jargon. 

Examples of technical research reports include legal and medical research reports. 

• Popular Research Report

A popular research report is one for a general audience; that is, for individuals who do not necessarily have any knowledge in the field of study. A popular research report aims to make information accessible to everyone. 

It is written in very simple language, which makes it easy to understand the findings and recommendations. Examples of popular research reports are the information contained in newspapers and magazines. 

Importance of a Research Report 

• Knowledge Transfer: As already stated above, one of the reasons for carrying out research is to contribute to the existing body of knowledge, and this is made possible with a research report. A research report serves as a means to effectively communicate the findings of a systematic investigation to all and sundry.  
• Identification of Knowledge Gaps: With a research report, you’d be able to identify knowledge gaps for further inquiry. A research report shows what has been done while hinting at other areas needing systematic investigation. 
• In market research, a research report would help you understand the market needs and peculiarities at a glance. 
• A research report allows you to present information in a precise and concise manner. 
• It is time-efficient and practical because, in a research report, you do not have to spend time detailing the findings of your research work in person. You can easily send out the report via email and have stakeholders look at it. 

Guide to Writing a Research Report

A lot of detail goes into writing a research report, and getting familiar with the different requirements would help you create the ideal research report. A research report is usually broken down into multiple sections, which allows for a concise presentation of information.

Structure and Example of a Research Report

This is the title of your systematic investigation. Your title should be concise and point to the aims, objectives, and findings of a research report. 

• Table of Contents

This is like a compass that makes it easier for readers to navigate the research report.

An abstract is an overview that highlights all important aspects of the research including the research method, data collection process, and research findings. Think of an abstract as a summary of your research report that presents pertinent information in a concise manner. 

An abstract is always brief; typically 100-150 words and goes straight to the point. The focus of your research abstract should be the 5Ws and 1H format – What, Where, Why, When, Who and How. 

• Introduction

Here, the researcher highlights the aims and objectives of the systematic investigation as well as the problem which the systematic investigation sets out to solve. When writing the report introduction, it is also essential to indicate whether the purposes of the research were achieved or would require more work.

In the introduction section, the researcher specifies the research problem and also outlines the significance of the systematic investigation. Also, the researcher is expected to outline any jargons and terminologies that are contained in the research.  

• Literature Review

A literature review is a written survey of existing knowledge in the field of study. In other words, it is the section where you provide an overview and analysis of different research works that are relevant to your systematic investigation. 

It highlights existing research knowledge and areas needing further investigation, which your research has sought to fill. At this stage, you can also hint at your research hypothesis and its possible implications for the existing body of knowledge in your field of study. 

• An Account of Investigation

This is a detailed account of the research process, including the methodology, sample, and research subjects. Here, you are expected to provide in-depth information on the research process including the data collection and analysis procedures. 

In a quantitative research report, you’d need to provide information surveys, questionnaires and other quantitative data collection methods used in your research. In a qualitative research report, you are expected to describe the qualitative data collection methods used in your research including interviews and focus groups. 

In this section, you are expected to present the results of the systematic investigation. 

This section further explains the findings of the research, earlier outlined. Here, you are expected to present a justification for each outcome and show whether the results are in line with your hypotheses or if other research studies have come up with similar results.

• Conclusions

This is a summary of all the information in the report. It also outlines the significance of the entire study. 

• References and Appendices

This section contains a list of all the primary and secondary research sources. 

Tips for Writing a Research Report

• Define the Context for the Report

As is obtainable when writing an essay, defining the context for your research report would help you create a detailed yet concise document. This is why you need to create an outline before writing so that you do not miss out on anything. 

• Define your Audience

Writing with your audience in mind is essential as it determines the tone of the report. If you’re writing for a general audience, you would want to present the information in a simple and relatable manner. For a specialized audience, you would need to make use of technical and field-specific terms. 

• Include Significant Findings

The idea of a research report is to present some sort of abridged version of your systematic investigation. In your report, you should exclude irrelevant information while highlighting only important data and findings. 

• Include Illustrations

Your research report should include illustrations and other visual representations of your data. Graphs, pie charts, and relevant images lend additional credibility to your systematic investigation.

• Choose the Right Title

A good research report title is brief, precise, and contains keywords from your research. It should provide a clear idea of your systematic investigation so that readers can grasp the entire focus of your research from the title. 

• Proofread the Report

Before publishing the document, ensure that you give it a second look to authenticate the information. If you can, get someone else to go through the report, too, and you can also run it through proofreading and editing software. 

How to Gather Research Data for Your Report  

• Understand the Problem

Every research aims at solving a specific problem or set of problems, and this should be at the back of your mind when writing your research report. Understanding the problem would help you to filter the information you have and include only important data in your report. 

• Know what your report seeks to achieve

This is somewhat similar to the point above because, in some way, the aim of your research report is intertwined with the objectives of your systematic investigation. Identifying the primary purpose of writing a research report would help you to identify and present the required information accordingly. 

• Identify your audience

Knowing your target audience plays a crucial role in data collection for a research report. If your research report is specifically for an organization, you would want to present industry-specific information or show how the research findings are relevant to the work that the company does. 

• Create Surveys/Questionnaires

A survey is a research method that is used to gather data from a specific group of people through a set of questions. It can be either quantitative or qualitative. 

A survey is usually made up of structured questions, and it can be administered online or offline. However, an online survey is a more effective method of research data collection because it helps you save time and gather data with ease. 

You can seamlessly create an online questionnaire for your research on Formplus . With the multiple sharing options available in the builder, you would be able to administer your survey to respondents in little or no time. 

Formplus also has a report summary too l that you can use to create custom visual reports for your research.

Step-by-step guide on how to create an online questionnaire using Formplus  

• Sign into Formplus

In the Formplus builder, you can easily create different online questionnaires for your research by dragging and dropping preferred fields into your form. To access the Formplus builder, you will need to create an account on Formplus. 

Once you do this, sign in to your account and click on Create new form to begin. 

• Edit Form Title : Click on the field provided to input your form title, for example, “Research Questionnaire.”
• Edit Form : Click on the edit icon to edit the form.
• Add Fields : Drag and drop preferred form fields into your form in the Formplus builder inputs column. There are several field input options for questionnaires in the Formplus builder. 
• Edit fields
• Click on “Save”
• Form Customization: With the form customization options in the form builder, you can easily change the outlook of your form and make it more unique and personalized. Formplus allows you to change your form theme, add background images, and even change the font according to your needs. 
• Multiple Sharing Options: Formplus offers various form-sharing options, which enables you to share your questionnaire with respondents easily. You can use the direct social media sharing buttons to share your form link to your organization’s social media pages.  You can also send out your survey form as email invitations to your research subjects too. If you wish, you can share your form’s QR code or embed it on your organization’s website for easy access. 

Conclusion  

Always remember that a research report is just as important as the actual systematic investigation because it plays a vital role in communicating research findings to everyone else. This is why you must take care to create a concise document summarizing the process of conducting any research. 

In this article, we’ve outlined essential tips to help you create a research report. When writing your report, you should always have the audience at the back of your mind, as this would set the tone for the document. 

Connect to Formplus, Get Started Now - It's Free!

• ethnographic research survey
• research report
• research report survey
• busayo.longe

You may also like:

21 Chrome Extensions for Academic Researchers in 2022

In this article, we will discuss a number of chrome extensions you can use to make your research process even seamless

Ethnographic Research: Types, Methods + [Question Examples]

Simple guide on ethnographic research, it types, methods, examples and advantages. Also highlights how to conduct an ethnographic...

How to Write a Problem Statement for your Research

Learn how to write problem statements before commencing any research effort. Learn about its structure and explore examples

Assessment Tools: Types, Examples & Importance

In this article, you’ll learn about different assessment tools to help you evaluate performance in various contexts

Formplus - For Seamless Data Collection

Collect data the right way with a versatile data collection tool. try formplus and transform your work productivity today..

Uncomplicated Reviews of Educational Research Methods

• Writing a Research Report

.pdf version of this page

This review covers the basic elements of a research report. This is a general guide for what you will see in journal articles or dissertations. This format assumes a mixed methods study, but you can leave out either quantitative or qualitative sections if you only used a single methodology.

This review is divided into sections for easy reference. There are five MAJOR parts of a Research Report:

1.    Introduction 2.    Review of Literature 3.    Methods 4.    Results 5.    Discussion

As a general guide, the Introduction, Review of Literature, and Methods should be about 1/3 of your paper, Discussion 1/3, then Results 1/3.

Section 1 : Cover Sheet (APA format cover sheet) optional, if required.

Section 2: Abstract (a basic summary of the report, including sample, treatment, design, results, and implications) (≤ 150 words) optional, if required.

Section 3 : Introduction (1-3 paragraphs) •    Basic introduction •    Supportive statistics (can be from periodicals) •    Statement of Purpose •    Statement of Significance

Section 4 : Research question(s) or hypotheses •    An overall research question (optional) •    A quantitative-based (hypotheses) •    A qualitative-based (research questions) Note: You will generally have more than one, especially if using hypotheses.

Section 5: Review of Literature ▪    Should be organized by subheadings ▪    Should adequately support your study using supporting, related, and/or refuting evidence ▪    Is a synthesis, not a collection of individual summaries

Section 6: Methods ▪    Procedure: Describe data gathering or participant recruitment, including IRB approval ▪    Sample: Describe the sample or dataset, including basic demographics ▪    Setting: Describe the setting, if applicable (generally only in qualitative designs) ▪    Treatment: If applicable, describe, in detail, how you implemented the treatment ▪    Instrument: Describe, in detail, how you implemented the instrument; Describe the reliability and validity associated with the instrument ▪    Data Analysis: Describe type of procedure (t-test, interviews, etc.) and software (if used)

Section 7: Results ▪    Restate Research Question 1 (Quantitative) ▪    Describe results ▪    Restate Research Question 2 (Qualitative) ▪    Describe results

Section 8: Discussion ▪    Restate Overall Research Question ▪    Describe how the results, when taken together, answer the overall question ▪    ***Describe how the results confirm or contrast the literature you reviewed

Section 9: Recommendations (if applicable, generally related to practice)

Section 10: Limitations ▪    Discuss, in several sentences, the limitations of this study. ▪    Research Design (overall, then info about the limitations of each separately) ▪    Sample ▪    Instrument/s ▪    Other limitations

Section 11: Conclusion (A brief closing summary)

Section 12: References (APA format)

Share this:

About research rundowns.

Research Rundowns was made possible by support from the Dewar College of Education at Valdosta State University .

• Experimental Design
• What is Educational Research?
• Writing Research Questions
• Mixed Methods Research Designs
• Qualitative Coding & Analysis
• Qualitative Research Design
• Correlation
• Effect Size
• Instrument, Validity, Reliability
• Mean & Standard Deviation
• Significance Testing (t-tests)
• Steps 1-4: Finding Research
• Steps 5-6: Analyzing & Organizing
• Steps 7-9: Citing & Writing

Create a free website or blog at WordPress.com.

• Already have a WordPress.com account? Log in now.
• Subscribe Subscribed
• Copy shortlink
• Report this content
• View post in Reader
• Manage subscriptions
• Collapse this bar

• Privacy Policy

Home » Research Methodology – Types, Examples and writing Guide

Research Methodology – Types, Examples and writing Guide

Table of Contents

Research Methodology

Definition:

Research Methodology refers to the systematic and scientific approach used to conduct research, investigate problems, and gather data and information for a specific purpose. It involves the techniques and procedures used to identify, collect , analyze , and interpret data to answer research questions or solve research problems . Moreover, They are philosophical and theoretical frameworks that guide the research process.

Structure of Research Methodology

Research methodology formats can vary depending on the specific requirements of the research project, but the following is a basic example of a structure for a research methodology section:

I. Introduction

• Provide an overview of the research problem and the need for a research methodology section
• Outline the main research questions and objectives

II. Research Design

• Explain the research design chosen and why it is appropriate for the research question(s) and objectives
• Discuss any alternative research designs considered and why they were not chosen
• Describe the research setting and participants (if applicable)

III. Data Collection Methods

• Describe the methods used to collect data (e.g., surveys, interviews, observations)
• Explain how the data collection methods were chosen and why they are appropriate for the research question(s) and objectives
• Detail any procedures or instruments used for data collection

IV. Data Analysis Methods

• Describe the methods used to analyze the data (e.g., statistical analysis, content analysis )
• Explain how the data analysis methods were chosen and why they are appropriate for the research question(s) and objectives
• Detail any procedures or software used for data analysis

V. Ethical Considerations

• Discuss any ethical issues that may arise from the research and how they were addressed
• Explain how informed consent was obtained (if applicable)
• Detail any measures taken to ensure confidentiality and anonymity

VI. Limitations

• Identify any potential limitations of the research methodology and how they may impact the results and conclusions

VII. Conclusion

• Summarize the key aspects of the research methodology section
• Explain how the research methodology addresses the research question(s) and objectives

Research Methodology Types

Types of Research Methodology are as follows:

Quantitative Research Methodology

This is a research methodology that involves the collection and analysis of numerical data using statistical methods. This type of research is often used to study cause-and-effect relationships and to make predictions.

Qualitative Research Methodology

This is a research methodology that involves the collection and analysis of non-numerical data such as words, images, and observations. This type of research is often used to explore complex phenomena, to gain an in-depth understanding of a particular topic, and to generate hypotheses.

Mixed-Methods Research Methodology

This is a research methodology that combines elements of both quantitative and qualitative research. This approach can be particularly useful for studies that aim to explore complex phenomena and to provide a more comprehensive understanding of a particular topic.

Case Study Research Methodology

This is a research methodology that involves in-depth examination of a single case or a small number of cases. Case studies are often used in psychology, sociology, and anthropology to gain a detailed understanding of a particular individual or group.

Action Research Methodology

This is a research methodology that involves a collaborative process between researchers and practitioners to identify and solve real-world problems. Action research is often used in education, healthcare, and social work.

Experimental Research Methodology

This is a research methodology that involves the manipulation of one or more independent variables to observe their effects on a dependent variable. Experimental research is often used to study cause-and-effect relationships and to make predictions.

Survey Research Methodology

This is a research methodology that involves the collection of data from a sample of individuals using questionnaires or interviews. Survey research is often used to study attitudes, opinions, and behaviors.

Grounded Theory Research Methodology

This is a research methodology that involves the development of theories based on the data collected during the research process. Grounded theory is often used in sociology and anthropology to generate theories about social phenomena.

Research Methodology Example

An Example of Research Methodology could be the following:

Research Methodology for Investigating the Effectiveness of Cognitive Behavioral Therapy in Reducing Symptoms of Depression in Adults

Introduction:

The aim of this research is to investigate the effectiveness of cognitive-behavioral therapy (CBT) in reducing symptoms of depression in adults. To achieve this objective, a randomized controlled trial (RCT) will be conducted using a mixed-methods approach.

Research Design:

The study will follow a pre-test and post-test design with two groups: an experimental group receiving CBT and a control group receiving no intervention. The study will also include a qualitative component, in which semi-structured interviews will be conducted with a subset of participants to explore their experiences of receiving CBT.

Participants:

Participants will be recruited from community mental health clinics in the local area. The sample will consist of 100 adults aged 18-65 years old who meet the diagnostic criteria for major depressive disorder. Participants will be randomly assigned to either the experimental group or the control group.

Intervention :

The experimental group will receive 12 weekly sessions of CBT, each lasting 60 minutes. The intervention will be delivered by licensed mental health professionals who have been trained in CBT. The control group will receive no intervention during the study period.

Data Collection:

Quantitative data will be collected through the use of standardized measures such as the Beck Depression Inventory-II (BDI-II) and the Generalized Anxiety Disorder-7 (GAD-7). Data will be collected at baseline, immediately after the intervention, and at a 3-month follow-up. Qualitative data will be collected through semi-structured interviews with a subset of participants from the experimental group. The interviews will be conducted at the end of the intervention period, and will explore participants’ experiences of receiving CBT.

Data Analysis:

Quantitative data will be analyzed using descriptive statistics, t-tests, and mixed-model analyses of variance (ANOVA) to assess the effectiveness of the intervention. Qualitative data will be analyzed using thematic analysis to identify common themes and patterns in participants’ experiences of receiving CBT.

Ethical Considerations:

This study will comply with ethical guidelines for research involving human subjects. Participants will provide informed consent before participating in the study, and their privacy and confidentiality will be protected throughout the study. Any adverse events or reactions will be reported and managed appropriately.

Data Management:

All data collected will be kept confidential and stored securely using password-protected databases. Identifying information will be removed from qualitative data transcripts to ensure participants’ anonymity.

Limitations:

One potential limitation of this study is that it only focuses on one type of psychotherapy, CBT, and may not generalize to other types of therapy or interventions. Another limitation is that the study will only include participants from community mental health clinics, which may not be representative of the general population.

Conclusion:

This research aims to investigate the effectiveness of CBT in reducing symptoms of depression in adults. By using a randomized controlled trial and a mixed-methods approach, the study will provide valuable insights into the mechanisms underlying the relationship between CBT and depression. The results of this study will have important implications for the development of effective treatments for depression in clinical settings.

How to Write Research Methodology

Writing a research methodology involves explaining the methods and techniques you used to conduct research, collect data, and analyze results. It’s an essential section of any research paper or thesis, as it helps readers understand the validity and reliability of your findings. Here are the steps to write a research methodology:

• Start by explaining your research question: Begin the methodology section by restating your research question and explaining why it’s important. This helps readers understand the purpose of your research and the rationale behind your methods.
• Describe your research design: Explain the overall approach you used to conduct research. This could be a qualitative or quantitative research design, experimental or non-experimental, case study or survey, etc. Discuss the advantages and limitations of the chosen design.
• Discuss your sample: Describe the participants or subjects you included in your study. Include details such as their demographics, sampling method, sample size, and any exclusion criteria used.
• Describe your data collection methods : Explain how you collected data from your participants. This could include surveys, interviews, observations, questionnaires, or experiments. Include details on how you obtained informed consent, how you administered the tools, and how you minimized the risk of bias.
• Explain your data analysis techniques: Describe the methods you used to analyze the data you collected. This could include statistical analysis, content analysis, thematic analysis, or discourse analysis. Explain how you dealt with missing data, outliers, and any other issues that arose during the analysis.
• Discuss the validity and reliability of your research : Explain how you ensured the validity and reliability of your study. This could include measures such as triangulation, member checking, peer review, or inter-coder reliability.
• Acknowledge any limitations of your research: Discuss any limitations of your study, including any potential threats to validity or generalizability. This helps readers understand the scope of your findings and how they might apply to other contexts.
• Provide a summary: End the methodology section by summarizing the methods and techniques you used to conduct your research. This provides a clear overview of your research methodology and helps readers understand the process you followed to arrive at your findings.

When to Write Research Methodology

Research methodology is typically written after the research proposal has been approved and before the actual research is conducted. It should be written prior to data collection and analysis, as it provides a clear roadmap for the research project.

The research methodology is an important section of any research paper or thesis, as it describes the methods and procedures that will be used to conduct the research. It should include details about the research design, data collection methods, data analysis techniques, and any ethical considerations.

The methodology should be written in a clear and concise manner, and it should be based on established research practices and standards. It is important to provide enough detail so that the reader can understand how the research was conducted and evaluate the validity of the results.

Applications of Research Methodology

Here are some of the applications of research methodology:

• To identify the research problem: Research methodology is used to identify the research problem, which is the first step in conducting any research.
• To design the research: Research methodology helps in designing the research by selecting the appropriate research method, research design, and sampling technique.
• To collect data: Research methodology provides a systematic approach to collect data from primary and secondary sources.
• To analyze data: Research methodology helps in analyzing the collected data using various statistical and non-statistical techniques.
• To test hypotheses: Research methodology provides a framework for testing hypotheses and drawing conclusions based on the analysis of data.
• To generalize findings: Research methodology helps in generalizing the findings of the research to the target population.
• To develop theories : Research methodology is used to develop new theories and modify existing theories based on the findings of the research.
• To evaluate programs and policies : Research methodology is used to evaluate the effectiveness of programs and policies by collecting data and analyzing it.
• To improve decision-making: Research methodology helps in making informed decisions by providing reliable and valid data.

Purpose of Research Methodology

Research methodology serves several important purposes, including:

• To guide the research process: Research methodology provides a systematic framework for conducting research. It helps researchers to plan their research, define their research questions, and select appropriate methods and techniques for collecting and analyzing data.
• To ensure research quality: Research methodology helps researchers to ensure that their research is rigorous, reliable, and valid. It provides guidelines for minimizing bias and error in data collection and analysis, and for ensuring that research findings are accurate and trustworthy.
• To replicate research: Research methodology provides a clear and detailed account of the research process, making it possible for other researchers to replicate the study and verify its findings.
• To advance knowledge: Research methodology enables researchers to generate new knowledge and to contribute to the body of knowledge in their field. It provides a means for testing hypotheses, exploring new ideas, and discovering new insights.
• To inform decision-making: Research methodology provides evidence-based information that can inform policy and decision-making in a variety of fields, including medicine, public health, education, and business.

Advantages of Research Methodology

Research methodology has several advantages that make it a valuable tool for conducting research in various fields. Here are some of the key advantages of research methodology:

• Systematic and structured approach : Research methodology provides a systematic and structured approach to conducting research, which ensures that the research is conducted in a rigorous and comprehensive manner.
• Objectivity : Research methodology aims to ensure objectivity in the research process, which means that the research findings are based on evidence and not influenced by personal bias or subjective opinions.
• Replicability : Research methodology ensures that research can be replicated by other researchers, which is essential for validating research findings and ensuring their accuracy.
• Reliability : Research methodology aims to ensure that the research findings are reliable, which means that they are consistent and can be depended upon.
• Validity : Research methodology ensures that the research findings are valid, which means that they accurately reflect the research question or hypothesis being tested.
• Efficiency : Research methodology provides a structured and efficient way of conducting research, which helps to save time and resources.
• Flexibility : Research methodology allows researchers to choose the most appropriate research methods and techniques based on the research question, data availability, and other relevant factors.
• Scope for innovation: Research methodology provides scope for innovation and creativity in designing research studies and developing new research techniques.

Research Methodology Vs Research Methods

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Significance of the Study – Examples and Writing...

Institutional Review Board – Application Sample...

Data Verification – Process, Types and Examples

What is a Hypothesis – Types, Examples and...

APA Research Paper Format – Example, Sample and...

Future Research – Thesis Guide

Research report guide: Definition, types, and tips

Last updated

5 March 2024

Reviewed by

Short on time? Get an AI generated summary of this article instead

From successful product launches or software releases to planning major business decisions, research reports serve many vital functions. They can summarize evidence and deliver insights and recommendations to save companies time and resources. They can reveal the most value-adding actions a company should take.

However, poorly constructed reports can have the opposite effect! Taking the time to learn established research-reporting rules and approaches will equip you with in-demand skills. You’ll be able to capture and communicate information applicable to numerous situations and industries, adding another string to your resume bow.

• What are research reports?

A research report is a collection of contextual data, gathered through organized research, that provides new insights into a particular challenge (which, for this article, is business-related). Research reports are a time-tested method for distilling large amounts of data into a narrow band of focus.

Their effectiveness often hinges on whether the report provides:

Strong, well-researched evidence

Comprehensive analysis

Well-considered conclusions and recommendations

Though the topic possibilities are endless, an effective research report keeps a laser-like focus on the specific questions or objectives the researcher believes are key to achieving success. Many research reports begin as research proposals, which usually include the need for a report to capture the findings of the study and recommend a course of action.

A description of the research method used, e.g., qualitative, quantitative, or other

Statistical analysis

Causal (or explanatory) research (i.e., research identifying relationships between two variables)

Inductive research, also known as ‘theory-building’

Deductive research, such as that used to test theories

Action research, where the research is actively used to drive change

• Importance of a research report

Research reports can unify and direct a company's focus toward the most appropriate strategic action. Of course, spending resources on a report takes up some of the company's human and financial resources. Choosing when a report is called for is a matter of judgment and experience.

Some development models used heavily in the engineering world, such as Waterfall development, are notorious for over-relying on research reports. With Waterfall development, there is a linear progression through each step of a project, and each stage is precisely documented and reported on before moving to the next.

The pace of the business world is faster than the speed at which your authors can produce and disseminate reports. So how do companies strike the right balance between creating and acting on research reports?

The answer lies, again, in the report's defined objectives. By paring down your most pressing interests and those of your stakeholders, your research and reporting skills will be the lenses that keep your company's priorities in constant focus.

Honing your company's primary objectives can save significant amounts of time and align research and reporting efforts with ever-greater precision.

Some examples of well-designed research objectives are:

Proving whether or not a product or service meets customer expectations

Demonstrating the value of a service, product, or business process to your stakeholders and investors

Improving business decision-making when faced with a lack of time or other constraints

Clarifying the relationship between a critical cause and effect for problematic business processes

Prioritizing the development of a backlog of products or product features

Comparing business or production strategies

Evaluating past decisions and predicting future outcomes

• Features of a research report

Research reports generally require a research design phase, where the report author(s) determine the most important elements the report must contain.

Just as there are various kinds of research, there are many types of reports.

Here are the standard elements of almost any research-reporting format:

Report summary. A broad but comprehensive overview of what readers will learn in the full report. Summaries are usually no more than one or two paragraphs and address all key elements of the report. Think of the key takeaways your primary stakeholders will want to know if they don’t have time to read the full document.

Introduction. Include a brief background of the topic, the type of research, and the research sample. Consider the primary goal of the report, who is most affected, and how far along the company is in meeting its objectives.

Methods. A description of how the researcher carried out data collection, analysis, and final interpretations of the data. Include the reasons for choosing a particular method. The methods section should strike a balance between clearly presenting the approach taken to gather data and discussing how it is designed to achieve the report's objectives.

Data analysis. This section contains interpretations that lead readers through the results relevant to the report's thesis. If there were unexpected results, include here a discussion on why that might be. Charts, calculations, statistics, and other supporting information also belong here (or, if lengthy, as an appendix). This should be the most detailed section of the research report, with references for further study. Present the information in a logical order, whether chronologically or in order of importance to the report's objectives.

Conclusion. This should be written with sound reasoning, often containing useful recommendations. The conclusion must be backed by a continuous thread of logic throughout the report.

• How to write a research paper

With a clear outline and robust pool of research, a research paper can start to write itself, but what's a good way to start a research report?

Research report examples are often the quickest way to gain inspiration for your report. Look for the types of research reports most relevant to your industry and consider which makes the most sense for your data and goals.

The research report outline will help you organize the elements of your report. One of the most time-tested report outlines is the IMRaD structure:

Introduction

...and Discussion

Pay close attention to the most well-established research reporting format in your industry, and consider your tone and language from your audience's perspective. Learn the key terms inside and out; incorrect jargon could easily harm the perceived authority of your research paper.

Along with a foundation in high-quality research and razor-sharp analysis, the most effective research reports will also demonstrate well-developed:

Internal logic

Narrative flow

Conclusions and recommendations

Readability, striking a balance between simple phrasing and technical insight

How to gather research data for your report

The validity of research data is critical. Because the research phase usually occurs well before the writing phase, you normally have plenty of time to vet your data.

However, research reports could involve ongoing research, where report authors (sometimes the researchers themselves) write portions of the report alongside ongoing research.

One such research-report example would be an R&D department that knows its primary stakeholders are eager to learn about a lengthy work in progress and any potentially important outcomes.

However you choose to manage the research and reporting, your data must meet robust quality standards before you can rely on it. Vet any research with the following questions in mind:

Does it use statistically valid analysis methods?

Do the researchers clearly explain their research, analysis, and sampling methods?

Did the researchers provide any caveats or advice on how to interpret their data?

Have you gathered the data yourself or were you in close contact with those who did?

Is the source biased?

Usually, flawed research methods become more apparent the further you get through a research report.

It's perfectly natural for good research to raise new questions, but the reader should have no uncertainty about what the data represents. There should be no doubt about matters such as:

Whether the sampling or analysis methods were based on sound and consistent logic

What the research samples are and where they came from

The accuracy of any statistical functions or equations

Validation of testing and measuring processes

When does a report require design validation?

A robust design validation process is often a gold standard in highly technical research reports. Design validation ensures the objects of a study are measured accurately, which lends more weight to your report and makes it valuable to more specialized industries.

Product development and engineering projects are the most common research-report examples that typically involve a design validation process. Depending on the scope and complexity of your research, you might face additional steps to validate your data and research procedures.

If you’re including design validation in the report (or report proposal), explain and justify your data-collection processes. Good design validation builds greater trust in a research report and lends more weight to its conclusions.

Choosing the right analysis method

Just as the quality of your report depends on properly validated research, a useful conclusion requires the most contextually relevant analysis method. This means comparing different statistical methods and choosing the one that makes the most sense for your research.

Most broadly, research analysis comes down to quantitative or qualitative methods (respectively: measurable by a number vs subjectively qualified values). There are also mixed research methods, which bridge the need for merging hard data with qualified assessments and still reach a cohesive set of conclusions.

Some of the most common analysis methods in research reports include:

Significance testing (aka hypothesis analysis), which compares test and control groups to determine how likely the data was the result of random chance.

Regression analysis , to establish relationships between variables, control for extraneous variables , and support correlation analysis.

Correlation analysis (aka bivariate testing), a method to identify and determine the strength of linear relationships between variables. It’s effective for detecting patterns from complex data, but care must be exercised to not confuse correlation with causation.

With any analysis method, it's important to justify which method you chose in the report. You should also provide estimates of the statistical accuracy (e.g., the p-value or confidence level of quantifiable data) of any data analysis.

This requires a commitment to the report's primary aim. For instance, this may be achieving a certain level of customer satisfaction by analyzing the cause and effect of changes to how service is delivered. Even better, use statistical analysis to calculate which change is most positively correlated with improved levels of customer satisfaction.

• Tips for writing research reports

There's endless good advice for writing effective research reports, and it almost all depends on the subjective aims of the people behind the report. Due to the wide variety of research reports, the best tips will be unique to each author's purpose.

Consider the following research report tips in any order, and take note of the ones most relevant to you:

No matter how in depth or detailed your report might be, provide a well-considered, succinct summary. At the very least, give your readers a quick and effective way to get up to speed.

Pare down your target audience (e.g., other researchers, employees, laypersons, etc.), and adjust your voice for their background knowledge and interest levels

For all but the most open-ended research, clarify your objectives, both for yourself and within the report.

Leverage your team members’ talents to fill in any knowledge gaps you might have. Your team is only as good as the sum of its parts.

Justify why your research proposal’s topic will endure long enough to derive value from the finished report.

Consolidate all research and analysis functions onto a single user-friendly platform. There's no reason to settle for less than developer-grade tools suitable for non-developers.

What's the format of a research report?

The research-reporting format is how the report is structured—a framework the authors use to organize their data, conclusions, arguments, and recommendations. The format heavily determines how the report's outline develops, because the format dictates the overall structure and order of information (based on the report's goals and research objectives).

What's the purpose of a research-report outline?

A good report outline gives form and substance to the report's objectives, presenting the results in a readable, engaging way. For any research-report format, the outline should create momentum along a chain of logic that builds up to a conclusion or interpretation.

What's the difference between a research essay and a research report?

There are several key differences between research reports and essays:

Research report:

Ordered into separate sections

More commercial in nature

Often includes infographics

Heavily descriptive

More self-referential

Usually provides recommendations

Research essay

Does not rely on research report formatting

More academically minded

Normally text-only

Less detailed

Omits discussion of methods

Usually non-prescriptive 

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 18 April 2023

Last updated: 27 February 2023

Last updated: 22 August 2024

Last updated: 5 February 2023

Last updated: 16 August 2024

Last updated: 9 March 2023

Last updated: 30 April 2024

Last updated: 12 December 2023

Last updated: 11 March 2024

Last updated: 4 July 2024

Last updated: 6 March 2024

Last updated: 5 March 2024

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next, log in or sign up.

Get started for free

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

Research Methods | Definitions, Types, Examples

Research methods are specific procedures for collecting and analyzing data. Developing your research methods is an integral part of your research design . When planning your methods, there are two key decisions you will make.

First, decide how you will collect data . Your methods depend on what type of data you need to answer your research question :

• Qualitative vs. quantitative : Will your data take the form of words or numbers?
• Primary vs. secondary : Will you collect original data yourself, or will you use data that has already been collected by someone else?
• Descriptive vs. experimental : Will you take measurements of something as it is, or will you perform an experiment?

Second, decide how you will analyze the data .

• For quantitative data, you can use statistical analysis methods to test relationships between variables.
• For qualitative data, you can use methods such as thematic analysis to interpret patterns and meanings in the data.

Table of contents

Methods for collecting data, examples of data collection methods, methods for analyzing data, examples of data analysis methods, other interesting articles, frequently asked questions about research methods.

Data is the information that you collect for the purposes of answering your research question . The type of data you need depends on the aims of your research.

Qualitative vs. quantitative data

Your choice of qualitative or quantitative data collection depends on the type of knowledge you want to develop.

For questions about ideas, experiences and meanings, or to study something that can’t be described numerically, collect qualitative data .

If you want to develop a more mechanistic understanding of a topic, or your research involves hypothesis testing , collect quantitative data .

You can also take a mixed methods approach , where you use both qualitative and quantitative research methods.

Primary vs. secondary research

Primary research is any original data that you collect yourself for the purposes of answering your research question (e.g. through surveys , observations and experiments ). Secondary research is data that has already been collected by other researchers (e.g. in a government census or previous scientific studies).

If you are exploring a novel research question, you’ll probably need to collect primary data . But if you want to synthesize existing knowledge, analyze historical trends, or identify patterns on a large scale, secondary data might be a better choice.

Descriptive vs. experimental data

In descriptive research , you collect data about your study subject without intervening. The validity of your research will depend on your sampling method .

In experimental research , you systematically intervene in a process and measure the outcome. The validity of your research will depend on your experimental design .

To conduct an experiment, you need to be able to vary your independent variable , precisely measure your dependent variable, and control for confounding variables . If it’s practically and ethically possible, this method is the best choice for answering questions about cause and effect.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Your data analysis methods will depend on the type of data you collect and how you prepare it for analysis.

Data can often be analyzed both quantitatively and qualitatively. For example, survey responses could be analyzed qualitatively by studying the meanings of responses or quantitatively by studying the frequencies of responses.

Qualitative analysis methods

Qualitative analysis is used to understand words, ideas, and experiences. You can use it to interpret data that was collected:

• From open-ended surveys and interviews , literature reviews , case studies , ethnographies , and other sources that use text rather than numbers.
• Using non-probability sampling methods .

Qualitative analysis tends to be quite flexible and relies on the researcher’s judgement, so you have to reflect carefully on your choices and assumptions and be careful to avoid research bias .

Quantitative analysis methods

Quantitative analysis uses numbers and statistics to understand frequencies, averages and correlations (in descriptive studies) or cause-and-effect relationships (in experiments).

You can use quantitative analysis to interpret data that was collected either:

• During an experiment .
• Using probability sampling methods .

Because the data is collected and analyzed in a statistically valid way, the results of quantitative analysis can be easily standardized and shared among researchers.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Chi square test of independence
• Statistical power
• Descriptive statistics
• Degrees of freedom
• Pearson correlation
• Null hypothesis
• Double-blind study
• Case-control study
• Research ethics
• Data collection
• Hypothesis testing
• Structured interviews

Research bias

• Hawthorne effect
• Unconscious bias
• Recall bias
• Halo effect
• Self-serving bias
• Information bias

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to systematically measure variables and test hypotheses . Qualitative methods allow you to explore concepts and experiences in more detail.

In mixed methods research , you use both qualitative and quantitative data collection and analysis methods to answer your research question .

A sample is a subset of individuals from a larger population . Sampling means selecting the group that you will actually collect data from in your research. For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

In statistics, sampling allows you to test a hypothesis about the characteristics of a population.

The research methods you use depend on the type of data you need to answer your research question .

• If you want to measure something or test a hypothesis , use quantitative methods . If you want to explore ideas, thoughts and meanings, use qualitative methods .
• If you want to analyze a large amount of readily-available data, use secondary data. If you want data specific to your purposes with control over how it is generated, collect primary data.
• If you want to establish cause-and-effect relationships between variables , use experimental methods. If you want to understand the characteristics of a research subject, use descriptive methods.

Methodology refers to the overarching strategy and rationale of your research project . It involves studying the methods used in your field and the theories or principles behind them, in order to develop an approach that matches your objectives.

Methods are the specific tools and procedures you use to collect and analyze data (for example, experiments, surveys , and statistical tests ).

In shorter scientific papers, where the aim is to report the findings of a specific study, you might simply describe what you did in a methods section .

In a longer or more complex research project, such as a thesis or dissertation , you will probably include a methodology section , where you explain your approach to answering the research questions and cite relevant sources to support your choice of methods.

Is this article helpful?

Other students also liked, writing strong research questions | criteria & examples.

• What Is a Research Design | Types, Guide & Examples
• Data Collection | Definition, Methods & Examples

More interesting articles

• Between-Subjects Design | Examples, Pros, & Cons
• Cluster Sampling | A Simple Step-by-Step Guide with Examples
• Confounding Variables | Definition, Examples & Controls
• Construct Validity | Definition, Types, & Examples
• Content Analysis | Guide, Methods & Examples
• Control Groups and Treatment Groups | Uses & Examples
• Control Variables | What Are They & Why Do They Matter?
• Correlation vs. Causation | Difference, Designs & Examples
• Correlational Research | When & How to Use
• Critical Discourse Analysis | Definition, Guide & Examples
• Cross-Sectional Study | Definition, Uses & Examples
• Descriptive Research | Definition, Types, Methods & Examples
• Ethical Considerations in Research | Types & Examples
• Explanatory and Response Variables | Definitions & Examples
• Explanatory Research | Definition, Guide, & Examples
• Exploratory Research | Definition, Guide, & Examples
• External Validity | Definition, Types, Threats & Examples
• Extraneous Variables | Examples, Types & Controls
• Guide to Experimental Design | Overview, Steps, & Examples
• How Do You Incorporate an Interview into a Dissertation? | Tips
• How to Do Thematic Analysis | Step-by-Step Guide & Examples
• How to Write a Literature Review | Guide, Examples, & Templates
• How to Write a Strong Hypothesis | Steps & Examples
• Inclusion and Exclusion Criteria | Examples & Definition
• Independent vs. Dependent Variables | Definition & Examples
• Inductive Reasoning | Types, Examples, Explanation
• Inductive vs. Deductive Research Approach | Steps & Examples
• Internal Validity in Research | Definition, Threats, & Examples
• Internal vs. External Validity | Understanding Differences & Threats
• Longitudinal Study | Definition, Approaches & Examples
• Mediator vs. Moderator Variables | Differences & Examples
• Mixed Methods Research | Definition, Guide & Examples
• Multistage Sampling | Introductory Guide & Examples
• Naturalistic Observation | Definition, Guide & Examples
• Operationalization | A Guide with Examples, Pros & Cons
• Population vs. Sample | Definitions, Differences & Examples
• Primary Research | Definition, Types, & Examples
• Qualitative vs. Quantitative Research | Differences, Examples & Methods
• Quasi-Experimental Design | Definition, Types & Examples
• Questionnaire Design | Methods, Question Types & Examples
• Random Assignment in Experiments | Introduction & Examples
• Random vs. Systematic Error | Definition & Examples
• Reliability vs. Validity in Research | Difference, Types and Examples
• Reproducibility vs Replicability | Difference & Examples
• Reproducibility vs. Replicability | Difference & Examples
• Sampling Methods | Types, Techniques & Examples
• Semi-Structured Interview | Definition, Guide & Examples
• Simple Random Sampling | Definition, Steps & Examples
• Single, Double, & Triple Blind Study | Definition & Examples
• Stratified Sampling | Definition, Guide & Examples
• Structured Interview | Definition, Guide & Examples
• Survey Research | Definition, Examples & Methods
• Systematic Review | Definition, Example, & Guide
• Systematic Sampling | A Step-by-Step Guide with Examples
• Textual Analysis | Guide, 3 Approaches & Examples
• The 4 Types of Reliability in Research | Definitions & Examples
• The 4 Types of Validity in Research | Definitions & Examples
• Transcribing an Interview | 5 Steps & Transcription Software
• Triangulation in Research | Guide, Types, Examples
• Types of Interviews in Research | Guide & Examples
• Types of Research Designs Compared | Guide & Examples
• Types of Variables in Research & Statistics | Examples
• Unstructured Interview | Definition, Guide & Examples
• What Is a Case Study? | Definition, Examples & Methods
• What Is a Case-Control Study? | Definition & Examples
• What Is a Cohort Study? | Definition & Examples
• What Is a Conceptual Framework? | Tips & Examples
• What Is a Controlled Experiment? | Definitions & Examples
• What Is a Double-Barreled Question?
• What Is a Focus Group? | Step-by-Step Guide & Examples
• What Is a Likert Scale? | Guide & Examples
• What Is a Prospective Cohort Study? | Definition & Examples
• What Is a Retrospective Cohort Study? | Definition & Examples
• What Is Action Research? | Definition & Examples
• What Is an Observational Study? | Guide & Examples
• What Is Concurrent Validity? | Definition & Examples
• What Is Content Validity? | Definition & Examples
• What Is Convenience Sampling? | Definition & Examples
• What Is Convergent Validity? | Definition & Examples
• What Is Criterion Validity? | Definition & Examples
• What Is Data Cleansing? | Definition, Guide & Examples
• What Is Deductive Reasoning? | Explanation & Examples
• What Is Discriminant Validity? | Definition & Example
• What Is Ecological Validity? | Definition & Examples
• What Is Ethnography? | Definition, Guide & Examples
• What Is Face Validity? | Guide, Definition & Examples
• What Is Non-Probability Sampling? | Types & Examples
• What Is Participant Observation? | Definition & Examples
• What Is Peer Review? | Types & Examples
• What Is Predictive Validity? | Examples & Definition
• What Is Probability Sampling? | Types & Examples
• What Is Purposive Sampling? | Definition & Examples
• What Is Qualitative Observation? | Definition & Examples
• What Is Qualitative Research? | Methods & Examples
• What Is Quantitative Observation? | Definition & Examples
• What Is Quantitative Research? | Definition, Uses & Methods

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

A GUIDE TO RESEARCH WRITING

• Publisher: paperback
• ISBN: 9781099092008

• Swiss School Of Business and Management Geneva

Research Reports: Definition and How to Write Them

Reports are usually spread across a vast horizon of topics but are focused on communicating information about a particular topic and a niche target market. The primary motive of research reports is to convey integral details about a study for marketers to consider while designing new strategies.

Certain events, facts, and other information based on incidents need to be relayed to the people in charge, and creating research reports is the most effective communication tool. Ideal research reports are extremely accurate in the offered information with a clear objective and conclusion. These reports should have a clean and structured format to relay information effectively.

What are Research Reports?

Research reports are recorded data prepared by researchers or statisticians after analyzing the information gathered by conducting organized research, typically in the form of surveys or qualitative methods .

A research report is a reliable source to recount details about a conducted research. It is most often considered to be a true testimony of all the work done to garner specificities of research.

The various sections of a research report are:

• Background/Introduction
• Implemented Methods
• Results based on Analysis
• Deliberation

Learn more: Quantitative Research

Components of Research Reports

Research is imperative for launching a new product/service or a new feature. The markets today are extremely volatile and competitive due to new entrants every day who may or may not provide effective products. An organization needs to make the right decisions at the right time to be relevant in such a market with updated products that suffice customer demands.

The details of a research report may change with the purpose of research but the main components of a report will remain constant. The research approach of the market researcher also influences the style of writing reports. Here are seven main components of a productive research report:

• Research Report Summary: The entire objective along with the overview of research are to be included in a summary which is a couple of paragraphs in length. All the multiple components of the research are explained in brief under the report summary.  It should be interesting enough to capture all the key elements of the report.
• Research Introduction: There always is a primary goal that the researcher is trying to achieve through a report. In the introduction section, he/she can cover answers related to this goal and establish a thesis which will be included to strive and answer it in detail.  This section should answer an integral question: “What is the current situation of the goal?”.  After the research design was conducted, did the organization conclude the goal successfully or they are still a work in progress –  provide such details in the introduction part of the research report.
• Research Methodology: This is the most important section of the report where all the important information lies. The readers can gain data for the topic along with analyzing the quality of provided content and the research can also be approved by other market researchers . Thus, this section needs to be highly informative with each aspect of research discussed in detail.  Information needs to be expressed in chronological order according to its priority and importance. Researchers should include references in case they gained information from existing techniques.
• Research Results: A short description of the results along with calculations conducted to achieve the goal will form this section of results. Usually, the exposition after data analysis is carried out in the discussion part of the report.

Learn more: Quantitative Data

• Research Discussion: The results are discussed in extreme detail in this section along with a comparative analysis of reports that could probably exist in the same domain. Any abnormality uncovered during research will be deliberated in the discussion section.  While writing research reports, the researcher will have to connect the dots on how the results will be applicable in the real world.
• Research References and Conclusion: Conclude all the research findings along with mentioning each and every author, article or any content piece from where references were taken.

Learn more: Qualitative Observation

15 Tips for Writing Research Reports

Writing research reports in the manner can lead to all the efforts going down the drain. Here are 15 tips for writing impactful research reports:

• Prepare the context before starting to write and start from the basics:  This was always taught to us in school – be well-prepared before taking a plunge into new topics. The order of survey questions might not be the ideal or most effective order for writing research reports. The idea is to start with a broader topic and work towards a more specific one and focus on a conclusion or support, which a research should support with the facts.  The most difficult thing to do in reporting, without a doubt is to start. Start with the title, the introduction, then document the first discoveries and continue from that. Once the marketers have the information well documented, they can write a general conclusion.
• Keep the target audience in mind while selecting a format that is clear, logical and obvious to them:  Will the research reports be presented to decision makers or other researchers? What are the general perceptions around that topic? This requires more care and diligence. A researcher will need a significant amount of information to start writing the research report. Be consistent with the wording, the numbering of the annexes and so on. Follow the approved format of the company for the delivery of research reports and demonstrate the integrity of the project with the objectives of the company.
• Have a clear research objective: A researcher should read the entire proposal again, and make sure that the data they provide contributes to the objectives that were raised from the beginning. Remember that speculations are for conversations, not for research reports, if a researcher speculates, they directly question their own research.
• Establish a working model:  Each study must have an internal logic, which will have to be established in the report and in the evidence. The researchers’ worst nightmare is to be required to write research reports and realize that key questions were not included.

Learn more: Quantitative Observation

• Gather all the information about the research topic. Who are the competitors of our customers? Talk to other researchers who have studied the subject of research, know the language of the industry. Misuse of the terms can discourage the readers of research reports from reading further.
• Read aloud while writing. While reading the report, if the researcher hears something inappropriate, for example, if they stumble over the words when reading them, surely the reader will too. If the researcher can’t put an idea in a single sentence, then it is very long and they must change it so that the idea is clear to everyone.
• Check grammar and spelling. Without a doubt, good practices help to understand the report. Use verbs in the present tense. Consider using the present tense, which makes the results sound more immediate. Find new words and other ways of saying things. Have fun with the language whenever possible.
• Discuss only the discoveries that are significant. If some data are not really significant, do not mention them. Remember that not everything is truly important or essential within research reports.

Learn more: Qualitative Data

• Try and stick to the survey questions. For example, do not say that the people surveyed “were worried” about an research issue , when there are different degrees of concern.
• The graphs must be clear enough so that they understand themselves. Do not let graphs lead the reader to make mistakes: give them a title, include the indications, the size of the sample, and the correct wording of the question.
• Be clear with messages. A researcher should always write every section of the report with an accuracy of details and language.
• Be creative with titles – Particularly in segmentation studies choose names “that give life to research”. Such names can survive for a long time after the initial investigation.
• Create an effective conclusion: The conclusion in the research reports is the most difficult to write, but it is an incredible opportunity to excel. Make a precise summary. Sometimes it helps to start the conclusion with something specific, then it describes the most important part of the study, and finally, it provides the implications of the conclusions.
• Get a couple more pair of eyes to read the report. Writers have trouble detecting their own mistakes. But they are responsible for what is presented. Ensure it has been approved by colleagues or friends before sending the find draft out.

Learn more: Market Research and Analysis

MORE LIKE THIS

Cross-Cultural Research: Methods, Challenges, & Key Findings

Aug 27, 2024

Qualtrics vs Microsoft Forms: Platform Comparison 2024

Are We Asking the Right Things at the Right Time in the Right Way? — Tuesday CX Thoughts

Jotform vs Microsoft Forms: Which Should You Choose?

Aug 26, 2024

Other categories

• Academic Research
• Artificial Intelligence
• Assessments
• Brand Awareness
• Case Studies
• Communities
• Consumer Insights
• Customer effort score
• Customer Engagement
• Customer Experience
• Customer Loyalty
• Customer Research
• Customer Satisfaction
• Employee Benefits
• Employee Engagement
• Employee Retention
• Friday Five
• General Data Protection Regulation
• Insights Hub
• Life@QuestionPro
• Market Research
• Mobile diaries
• Mobile Surveys
• New Features
• Online Communities
• Question Types
• Questionnaire
• QuestionPro Products
• Release Notes
• Research Tools and Apps
• Revenue at Risk
• Survey Templates
• Training Tips
• Tuesday CX Thoughts (TCXT)
• Uncategorized
• What’s Coming Up
• Workforce Intelligence

How to Write a Report of a Research Study

• First Online: 15 December 2017

Cite this chapter

• Robert B. Taylor 2  

4652 Accesses

Preparing a report of a research trial is a special type of medical writing. The experienced author of research reports follows the IMRAD model: introduction, methods, results, and discussion, although this scheme is often expanded to include subheadings such as participants, randomization and intervention, data collection, outcomes, and statistical analysis. This chapter discusses clinical trial registration, statistics, reference citations, reproducibility, and generalizability.

In questions of science, the authority of a thousand is not worth the humble reasoning of a single individual. Italian physicist and philosopher Galileo Galilei (1564–1642).

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Day RA. How to write and publish a scientific paper. Westport, CT: Oryx; 1998. p. 34.

Google Scholar  

Cohen DJ, Crabtree BF. Evaluative criteria for qualitative research in health care: controversies and recommendations. Ann Fam Med. 2008;6(4):331–9.

Article   PubMed   PubMed Central   Google Scholar  

Whimster WF. Biomedical research: how to plan, publish, and present it. New York: Springer; 1997. p. 101, 105.

Book   Google Scholar  

Wager E, Altman DG, Simera I, Toma TP. Do declarative titles affect readers’ perceptions of research findings? Research integrity. Peer Rev. 2016;1:11.

Article   Google Scholar  

Jacques TS, Sebire NJ. The impact of article titles on citation hits: an analysis of general and specialist medical journals. JRSM Short Rep. 2010;1:2.

International Committee of Medical Journal Editors. Recommendations for the conduct, reporting, editing, and publication of scholarly work in medical journals. http://www.icmje.org/recommendations/ .

Meyer H, Varpio L, Gruppen L, Gurjit S. The ethics and etiquette of research collaboration. Acad Med. 2016;91(12):e13.

Strasburger VC. Righting medical writing. JAMA. 1985;254(13):1789–90.

Article   CAS   PubMed   Google Scholar  

Nakayama T, Hirai N, Yamazaki S, Naito M. Adoption of structured abstracts by general medical journals and format for a structured abstract. J Med Libr Assoc. 2005;93(2):237–42.

PubMed   PubMed Central   Google Scholar  

Journal of the American Medical Association. Instructions for authors. http://jamanetwork.com/journals/jama/pages/instructions-for-authors#SecAbstractsforReportsofOriginalData .

Strasak AM, Zaman Q, Marinel G, Pfeiffer KP, Ulmer H. The use of statistics in medical research: a comparison of The New England Journal of Medicine and Nature Medicine. Am Stat. 2007;61(1):47–55.

Gotta AW. Review of Taylor RB. The clinician’s guide to medical writing. Ed. 1. New York: Springer-Verlag, 2005. JAMA. 2005;293(9):1142.

CAS   Google Scholar  

Alexandrov AV. How to write a research paper. Cerebrovasc Dis. 2004;18(2):135–8.

Article   PubMed   Google Scholar  

Wager E. What medical writing means to me. Mens Sana Monogr. 2007;5(1):169–78.

Dirckx J. Dx+Rx: a physician’s guide to medical writing. Boston: G.K. Hall; 1977. p. 99.

Horton R. The hidden research paper. JAMA. 2002;287:2775–8.

Hoff JT. Research by academic surgeons. Am J Surg. 2003;85(1):13–5.

Download references

Author information

Authors and affiliations.

Oregon Health & Science University, Portland, OR, USA

Robert B. Taylor

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this chapter

Taylor, R.B. (2018). How to Write a Report of a Research Study. In: Medical Writing. Springer, Cham. https://doi.org/10.1007/978-3-319-70126-4_11

Download citation

DOI : https://doi.org/10.1007/978-3-319-70126-4_11

Published : 15 December 2017

Publisher Name : Springer, Cham

Print ISBN : 978-3-319-70125-7

Online ISBN : 978-3-319-70126-4

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

11.2 Writing a Research Report in American Psychological Association (APA) Style

Learning objectives.

• Identify the major sections of an APA-style research report and the basic contents of each section.
• Plan and write an effective APA-style research report.

In this section, we look at how to write an APA-style empirical research report , an article that presents the results of one or more new studies. Recall that the standard sections of an empirical research report provide a kind of outline. Here we consider each of these sections in detail, including what information it contains, how that information is formatted and organized, and tips for writing each section. At the end of this section is a sample APA-style research report that illustrates many of these principles.

Sections of a Research Report

Title page and abstract.

An APA-style research report begins with a title page . The title is centered in the upper half of the page, with each important word capitalized. The title should clearly and concisely (in about 12 words or fewer) communicate the primary variables and research questions. This sometimes requires a main title followed by a subtitle that elaborates on the main title, in which case the main title and subtitle are separated by a colon. Here are some titles from recent issues of professional journals published by the American Psychological Association.

• Sex Differences in Coping Styles and Implications for Depressed Mood
• Effects of Aging and Divided Attention on Memory for Items and Their Contexts
• Computer-Assisted Cognitive Behavioral Therapy for Child Anxiety: Results of a Randomized Clinical Trial
• Virtual Driving and Risk Taking: Do Racing Games Increase Risk-Taking Cognitions, Affect, and Behavior?

Below the title are the authors’ names and, on the next line, their institutional affiliation—the university or other institution where the authors worked when they conducted the research. As we have already seen, the authors are listed in an order that reflects their contribution to the research. When multiple authors have made equal contributions to the research, they often list their names alphabetically or in a randomly determined order.

It’s Soooo Cute!

How Informal Should an Article Title Be?

In some areas of psychology, the titles of many empirical research reports are informal in a way that is perhaps best described as “cute.” They usually take the form of a play on words or a well-known expression that relates to the topic under study. Here are some examples from recent issues of the Journal of Personality and Social Psychology .

• “Let’s Get Serious: Communicating Commitment in Romantic Relationships”
• “Through the Looking Glass Clearly: Accuracy and Assumed Similarity in Well-Adjusted Individuals’ First Impressions”
• “Don’t Hide Your Happiness! Positive Emotion Dissociation, Social Connectedness, and Psychological Functioning”
• “Forbidden Fruit: Inattention to Attractive Alternatives Provokes Implicit Relationship Reactance”

Individual researchers differ quite a bit in their preference for such titles. Some use them regularly, while others never use them. What might be some of the pros and cons of using cute article titles?

For articles that are being submitted for publication, the title page also includes an author note that lists the authors’ full institutional affiliations, any acknowledgments the authors wish to make to agencies that funded the research or to colleagues who commented on it, and contact information for the authors. For student papers that are not being submitted for publication—including theses—author notes are generally not necessary.

The abstract is a summary of the study. It is the second page of the manuscript and is headed with the word Abstract . The first line is not indented. The abstract presents the research question, a summary of the method, the basic results, and the most important conclusions. Because the abstract is usually limited to about 200 words, it can be a challenge to write a good one.

Introduction

The introduction begins on the third page of the manuscript. The heading at the top of this page is the full title of the manuscript, with each important word capitalized as on the title page. The introduction includes three distinct subsections, although these are typically not identified by separate headings. The opening introduces the research question and explains why it is interesting, the literature review discusses relevant previous research, and the closing restates the research question and comments on the method used to answer it.

The Opening

The opening , which is usually a paragraph or two in length, introduces the research question and explains why it is interesting. To capture the reader’s attention, researcher Daryl Bem recommends starting with general observations about the topic under study, expressed in ordinary language (not technical jargon)—observations that are about people and their behavior (not about researchers or their research; Bem, 2003). Concrete examples are often very useful here. According to Bem, this would be a poor way to begin a research report:

Festinger’s theory of cognitive dissonance received a great deal of attention during the latter part of the 20th century (p. 191)

The following would be much better:

The individual who holds two beliefs that are inconsistent with one another may feel uncomfortable. For example, the person who knows that he or she enjoys smoking but believes it to be unhealthy may experience discomfort arising from the inconsistency or disharmony between these two thoughts or cognitions. This feeling of discomfort was called cognitive dissonance by social psychologist Leon Festinger (1957), who suggested that individuals will be motivated to remove this dissonance in whatever way they can (p. 191).

After capturing the reader’s attention, the opening should go on to introduce the research question and explain why it is interesting. Will the answer fill a gap in the literature? Will it provide a test of an important theory? Does it have practical implications? Giving readers a clear sense of what the research is about and why they should care about it will motivate them to continue reading the literature review—and will help them make sense of it.

Breaking the Rules

Researcher Larry Jacoby reported several studies showing that a word that people see or hear repeatedly can seem more familiar even when they do not recall the repetitions—and that this tendency is especially pronounced among older adults. He opened his article with the following humorous anecdote (Jacoby, 1999).

A friend whose mother is suffering symptoms of Alzheimer’s disease (AD) tells the story of taking her mother to visit a nursing home, preliminary to her mother’s moving there. During an orientation meeting at the nursing home, the rules and regulations were explained, one of which regarded the dining room. The dining room was described as similar to a fine restaurant except that tipping was not required. The absence of tipping was a central theme in the orientation lecture, mentioned frequently to emphasize the quality of care along with the advantages of having paid in advance. At the end of the meeting, the friend’s mother was asked whether she had any questions. She replied that she only had one question: “Should I tip?” (p. 3).

Although both humor and personal anecdotes are generally discouraged in APA-style writing, this example is a highly effective way to start because it both engages the reader and provides an excellent real-world example of the topic under study.

The Literature Review

Immediately after the opening comes the literature review , which describes relevant previous research on the topic and can be anywhere from several paragraphs to several pages in length. However, the literature review is not simply a list of past studies. Instead, it constitutes a kind of argument for why the research question is worth addressing. By the end of the literature review, readers should be convinced that the research question makes sense and that the present study is a logical next step in the ongoing research process.

Like any effective argument, the literature review must have some kind of structure. For example, it might begin by describing a phenomenon in a general way along with several studies that demonstrate it, then describing two or more competing theories of the phenomenon, and finally presenting a hypothesis to test one or more of the theories. Or it might describe one phenomenon, then describe another phenomenon that seems inconsistent with the first one, then propose a theory that resolves the inconsistency, and finally present a hypothesis to test that theory. In applied research, it might describe a phenomenon or theory, then describe how that phenomenon or theory applies to some important real-world situation, and finally suggest a way to test whether it does, in fact, apply to that situation.

Looking at the literature review in this way emphasizes a few things. First, it is extremely important to start with an outline of the main points that you want to make, organized in the order that you want to make them. The basic structure of your argument, then, should be apparent from the outline itself. Second, it is important to emphasize the structure of your argument in your writing. One way to do this is to begin the literature review by summarizing your argument even before you begin to make it. “In this article, I will describe two apparently contradictory phenomena, present a new theory that has the potential to resolve the apparent contradiction, and finally present a novel hypothesis to test the theory.” Another way is to open each paragraph with a sentence that summarizes the main point of the paragraph and links it to the preceding points. These opening sentences provide the “transitions” that many beginning researchers have difficulty with. Instead of beginning a paragraph by launching into a description of a previous study, such as “Williams (2004) found that…,” it is better to start by indicating something about why you are describing this particular study. Here are some simple examples:

Another example of this phenomenon comes from the work of Williams (2004).

Williams (2004) offers one explanation of this phenomenon.

An alternative perspective has been provided by Williams (2004).

We used a method based on the one used by Williams (2004).

Finally, remember that your goal is to construct an argument for why your research question is interesting and worth addressing—not necessarily why your favorite answer to it is correct. In other words, your literature review must be balanced. If you want to emphasize the generality of a phenomenon, then of course you should discuss various studies that have demonstrated it. However, if there are other studies that have failed to demonstrate it, you should discuss them too. Or if you are proposing a new theory, then of course you should discuss findings that are consistent with that theory. However, if there are other findings that are inconsistent with it, again, you should discuss them too. It is acceptable to argue that the balance of the research supports the existence of a phenomenon or is consistent with a theory (and that is usually the best that researchers in psychology can hope for), but it is not acceptable to ignore contradictory evidence. Besides, a large part of what makes a research question interesting is uncertainty about its answer.

The Closing

The closing of the introduction—typically the final paragraph or two—usually includes two important elements. The first is a clear statement of the main research question or hypothesis. This statement tends to be more formal and precise than in the opening and is often expressed in terms of operational definitions of the key variables. The second is a brief overview of the method and some comment on its appropriateness. Here, for example, is how Darley and Latané (1968) concluded the introduction to their classic article on the bystander effect:

These considerations lead to the hypothesis that the more bystanders to an emergency, the less likely, or the more slowly, any one bystander will intervene to provide aid. To test this proposition it would be necessary to create a situation in which a realistic “emergency” could plausibly occur. Each subject should also be blocked from communicating with others to prevent his getting information about their behavior during the emergency. Finally, the experimental situation should allow for the assessment of the speed and frequency of the subjects’ reaction to the emergency. The experiment reported below attempted to fulfill these conditions (p. 378).

Thus the introduction leads smoothly into the next major section of the article—the method section.

The method section is where you describe how you conducted your study. An important principle for writing a method section is that it should be clear and detailed enough that other researchers could replicate the study by following your “recipe.” This means that it must describe all the important elements of the study—basic demographic characteristics of the participants, how they were recruited, whether they were randomly assigned, how the variables were manipulated or measured, how counterbalancing was accomplished, and so on. At the same time, it should avoid irrelevant details such as the fact that the study was conducted in Classroom 37B of the Industrial Technology Building or that the questionnaire was double-sided and completed using pencils.

The method section begins immediately after the introduction ends with the heading “Method” (not “Methods”) centered on the page. Immediately after this is the subheading “Participants,” left justified and in italics. The participants subsection indicates how many participants there were, the number of women and men, some indication of their age, other demographics that may be relevant to the study, and how they were recruited, including any incentives given for participation.

Figure 11.1 Three Ways of Organizing an APA-Style Method

After the participants section, the structure can vary a bit. Figure 11.1 “Three Ways of Organizing an APA-Style Method” shows three common approaches. In the first, the participants section is followed by a design and procedure subsection, which describes the rest of the method. This works well for methods that are relatively simple and can be described adequately in a few paragraphs. In the second approach, the participants section is followed by separate design and procedure subsections. This works well when both the design and the procedure are relatively complicated and each requires multiple paragraphs.

What is the difference between design and procedure? The design of a study is its overall structure. What were the independent and dependent variables? Was the independent variable manipulated, and if so, was it manipulated between or within subjects? How were the variables operationally defined? The procedure is how the study was carried out. It often works well to describe the procedure in terms of what the participants did rather than what the researchers did. For example, the participants gave their informed consent, read a set of instructions, completed a block of four practice trials, completed a block of 20 test trials, completed two questionnaires, and were debriefed and excused.

In the third basic way to organize a method section, the participants subsection is followed by a materials subsection before the design and procedure subsections. This works well when there are complicated materials to describe. This might mean multiple questionnaires, written vignettes that participants read and respond to, perceptual stimuli, and so on. The heading of this subsection can be modified to reflect its content. Instead of “Materials,” it can be “Questionnaires,” “Stimuli,” and so on.

The results section is where you present the main results of the study, including the results of the statistical analyses. Although it does not include the raw data—individual participants’ responses or scores—researchers should save their raw data and make them available to other researchers who request them. Some journals now make the raw data available online.

Although there are no standard subsections, it is still important for the results section to be logically organized. Typically it begins with certain preliminary issues. One is whether any participants or responses were excluded from the analyses and why. The rationale for excluding data should be described clearly so that other researchers can decide whether it is appropriate. A second preliminary issue is how multiple responses were combined to produce the primary variables in the analyses. For example, if participants rated the attractiveness of 20 stimulus people, you might have to explain that you began by computing the mean attractiveness rating for each participant. Or if they recalled as many items as they could from study list of 20 words, did you count the number correctly recalled, compute the percentage correctly recalled, or perhaps compute the number correct minus the number incorrect? A third preliminary issue is the reliability of the measures. This is where you would present test-retest correlations, Cronbach’s α, or other statistics to show that the measures are consistent across time and across items. A final preliminary issue is whether the manipulation was successful. This is where you would report the results of any manipulation checks.

The results section should then tackle the primary research questions, one at a time. Again, there should be a clear organization. One approach would be to answer the most general questions and then proceed to answer more specific ones. Another would be to answer the main question first and then to answer secondary ones. Regardless, Bem (2003) suggests the following basic structure for discussing each new result:

• Remind the reader of the research question.
• Give the answer to the research question in words.
• Present the relevant statistics.
• Qualify the answer if necessary.
• Summarize the result.

Notice that only Step 3 necessarily involves numbers. The rest of the steps involve presenting the research question and the answer to it in words. In fact, the basic results should be clear even to a reader who skips over the numbers.

The discussion is the last major section of the research report. Discussions usually consist of some combination of the following elements:

• Summary of the research
• Theoretical implications
• Practical implications
• Limitations
• Suggestions for future research

The discussion typically begins with a summary of the study that provides a clear answer to the research question. In a short report with a single study, this might require no more than a sentence. In a longer report with multiple studies, it might require a paragraph or even two. The summary is often followed by a discussion of the theoretical implications of the research. Do the results provide support for any existing theories? If not, how can they be explained? Although you do not have to provide a definitive explanation or detailed theory for your results, you at least need to outline one or more possible explanations. In applied research—and often in basic research—there is also some discussion of the practical implications of the research. How can the results be used, and by whom, to accomplish some real-world goal?

The theoretical and practical implications are often followed by a discussion of the study’s limitations. Perhaps there are problems with its internal or external validity. Perhaps the manipulation was not very effective or the measures not very reliable. Perhaps there is some evidence that participants did not fully understand their task or that they were suspicious of the intent of the researchers. Now is the time to discuss these issues and how they might have affected the results. But do not overdo it. All studies have limitations, and most readers will understand that a different sample or different measures might have produced different results. Unless there is good reason to think they would have, however, there is no reason to mention these routine issues. Instead, pick two or three limitations that seem like they could have influenced the results, explain how they could have influenced the results, and suggest ways to deal with them.

Most discussions end with some suggestions for future research. If the study did not satisfactorily answer the original research question, what will it take to do so? What new research questions has the study raised? This part of the discussion, however, is not just a list of new questions. It is a discussion of two or three of the most important unresolved issues. This means identifying and clarifying each question, suggesting some alternative answers, and even suggesting ways they could be studied.

Finally, some researchers are quite good at ending their articles with a sweeping or thought-provoking conclusion. Darley and Latané (1968), for example, ended their article on the bystander effect by discussing the idea that whether people help others may depend more on the situation than on their personalities. Their final sentence is, “If people understand the situational forces that can make them hesitate to intervene, they may better overcome them” (p. 383). However, this kind of ending can be difficult to pull off. It can sound overreaching or just banal and end up detracting from the overall impact of the article. It is often better simply to end when you have made your final point (although you should avoid ending on a limitation).

The references section begins on a new page with the heading “References” centered at the top of the page. All references cited in the text are then listed in the format presented earlier. They are listed alphabetically by the last name of the first author. If two sources have the same first author, they are listed alphabetically by the last name of the second author. If all the authors are the same, then they are listed chronologically by the year of publication. Everything in the reference list is double-spaced both within and between references.

Appendixes, Tables, and Figures

Appendixes, tables, and figures come after the references. An appendix is appropriate for supplemental material that would interrupt the flow of the research report if it were presented within any of the major sections. An appendix could be used to present lists of stimulus words, questionnaire items, detailed descriptions of special equipment or unusual statistical analyses, or references to the studies that are included in a meta-analysis. Each appendix begins on a new page. If there is only one, the heading is “Appendix,” centered at the top of the page. If there is more than one, the headings are “Appendix A,” “Appendix B,” and so on, and they appear in the order they were first mentioned in the text of the report.

After any appendixes come tables and then figures. Tables and figures are both used to present results. Figures can also be used to illustrate theories (e.g., in the form of a flowchart), display stimuli, outline procedures, and present many other kinds of information. Each table and figure appears on its own page. Tables are numbered in the order that they are first mentioned in the text (“Table 1,” “Table 2,” and so on). Figures are numbered the same way (“Figure 1,” “Figure 2,” and so on). A brief explanatory title, with the important words capitalized, appears above each table. Each figure is given a brief explanatory caption, where (aside from proper nouns or names) only the first word of each sentence is capitalized. More details on preparing APA-style tables and figures are presented later in the book.

Sample APA-Style Research Report

Figure 11.2 “Title Page and Abstract” , Figure 11.3 “Introduction and Method” , Figure 11.4 “Results and Discussion” , and Figure 11.5 “References and Figure” show some sample pages from an APA-style empirical research report originally written by undergraduate student Tomoe Suyama at California State University, Fresno. The main purpose of these figures is to illustrate the basic organization and formatting of an APA-style empirical research report, although many high-level and low-level style conventions can be seen here too.

Figure 11.2 Title Page and Abstract

This student paper does not include the author note on the title page. The abstract appears on its own page.

Figure 11.3 Introduction and Method

Note that the introduction is headed with the full title, and the method section begins immediately after the introduction ends.

Figure 11.4 Results and Discussion

The discussion begins immediately after the results section ends.

Figure 11.5 References and Figure

If there were appendixes or tables, they would come before the figure.

Key Takeaways

• An APA-style empirical research report consists of several standard sections. The main ones are the abstract, introduction, method, results, discussion, and references.
• The introduction consists of an opening that presents the research question, a literature review that describes previous research on the topic, and a closing that restates the research question and comments on the method. The literature review constitutes an argument for why the current study is worth doing.
• The method section describes the method in enough detail that another researcher could replicate the study. At a minimum, it consists of a participants subsection and a design and procedure subsection.
• The results section describes the results in an organized fashion. Each primary result is presented in terms of statistical results but also explained in words.
• The discussion typically summarizes the study, discusses theoretical and practical implications and limitations of the study, and offers suggestions for further research.
• Practice: Look through an issue of a general interest professional journal (e.g., Psychological Science ). Read the opening of the first five articles and rate the effectiveness of each one from 1 ( very ineffective ) to 5 ( very effective ). Write a sentence or two explaining each rating.
• Practice: Find a recent article in a professional journal and identify where the opening, literature review, and closing of the introduction begin and end.
• Practice: Find a recent article in a professional journal and highlight in a different color each of the following elements in the discussion: summary, theoretical implications, practical implications, limitations, and suggestions for future research.

Bem, D. J. (2003). Writing the empirical journal article. In J. M. Darley, M. P. Zanna, & H. R. Roediger III (Eds.), The compleat academic: A practical guide for the beginning social scientist (2nd ed.). Washington, DC: American Psychological Association.

Darley, J. M., & Latané, B. (1968). Bystander intervention in emergencies: Diffusion of responsibility. Journal of Personality and Social Psychology, 4 , 377–383.

Research Methods in Psychology Copyright © 2016 by University of Minnesota is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

• RMIT Australia
• RMIT Europe
• RMIT Vietnam
• RMIT Global
• RMIT Online
• Alumni & Giving

• What will I do?
• What will I need?
• Who will help me?
• About the institution
• New to university?
• Studying efficiently
• Time management
• Mind mapping
• Note-taking
• Reading skills
• Argument analysis
• Preparing for assessment
• Critical thinking and argument analysis
• Online learning skills
• Starting my first assignment
• Researching your assignment
• What is referencing?
• Understanding citations
• When referencing isn't needed
• Paraphrasing
• Summarising
• Synthesising
• Integrating ideas with reporting words
• Referencing with Easy Cite
• Getting help with referencing
• Acting with academic integrity
• Artificial intelligence tools
• Understanding your audience
• Writing for coursework
• Literature review
• Academic style
• Writing for the workplace
• Spelling tips
• Writing paragraphs
• Writing sentences
• Academic word lists
• Annotated bibliographies
• Artist statement
• Case studies
• Creating effective poster presentations
• Essays, Reports, Reflective Writing
• Law assessments
• Oral presentations
• Reflective writing
• Art and design
• Critical thinking
• Maths and statistics
• Sustainability
• Educators' guide
• Learning Lab content in context
• Latest updates
• Students Alumni & Giving Staff Library

Learning Lab

Getting started at uni, study skills, referencing.

• When referencing isn't needed
• Integrating ideas

Writing and assessments

• Critical reading
• Poster presentations
• Postgraduate report writing

Subject areas

For educators.

• Educators' guide
• Methodology section in a report

Method/Methodology

The method section of a report details how the research was conducted, the research methods used and the reasons for choosing those methods. It should outline:

• the participants and research methods used, e.g. surveys/questionnaire, interviews
• refer to other relevant studies.

The methodology is a step-by-step explanation of the research process. It should be factual and is mainly written in the past tense.

Sample Methodology

The research used a quantitative methodology based on the approach advocated by Williams (2009). This study was conducted by questionnaire and investigated university teaching staff attitudes to the use of mobile phones in tutorials (see Appendix 1). The questionnaire used Likert scales to assess social attitudes (Jones 2007) to student mobile phone use and provided open-ended responses for additional comments. The survey was voluntary and anonymous. A total of 412 questionnaires were distributed online to randomly selected staff from each of the three colleges within the university. The completed questionnaires were returned by email.

• 'Describe' is short for: describing how the research was done.
• 'Refers' is short for: refers to relevant reading/literature.

[Describe: The research used a quantitative methodology based on the approach advocated by Williams (2009).] [Refer: This study was conducted by questionnaire and investigated university teaching staff attitudes to the use of mobile phones in tutorials (see Appendix 1). The questionnaire used Likert scales to assess social attitudes (Jones 2007) to student mobile phone use and provided open-ended responses for additional comments.] [Describes: The survey was voluntary and anonymous. A total of 412 questionnaires were distributed online to randomly selected staff from each of the three colleges within the university. The completed questionnaires were returned by email.]

• Overall structure of a report
• Example of a report
• Report checklist
• Writing a business research report

Still can't find what you need?

The RMIT University Library provides study support , one-on-one consultations and peer mentoring to RMIT students.

• Facebook (opens in a new window)
• Twitter (opens in a new window)
• Instagram (opens in a new window)
• Linkedin (opens in a new window)
• YouTube (opens in a new window)
• Weibo (opens in a new window)
• Copyright © 2024 RMIT University |
• Accessibility |
• Learning Lab feedback |
• Complaints |
• ABN 49 781 030 034 |
• CRICOS provider number: 00122A |
• RTO Code: 3046 |
• Open Universities Australia

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

The purpose of a field report in the social sciences is to describe the deliberate observation of people, places, and/or events and to analyze what has been observed in order to identify and categorize common themes in relation to the research problem underpinning the study. The content represents the researcher's interpretation of meaning found in data that has been gathered during one or more observational events.

Flick, Uwe. The SAGE Handbook of Qualitative Data Collection . London: SAGE Publications, 2018; Lofland, John, David Snow, Leon Anderson, and Lyn H. Lofland. Analyzing Social Settings: A Guide to Qualitative Observation and Analysis. Long Grove, IL: Waveland Press, 2022; Baker, Lynda. "Observation: A Complex Research Method." Library Trends 55 (Summer 2006): 171-189.; Kellehear, Allan. The Unobtrusive Researcher: A Guide to Methods . New York: Routledge, 2020.

How to Approach Writing a Field Report

How to Begin

Field reports are most often assigned in disciplines of the applied social sciences [e.g., social work, anthropology, gerontology, criminal justice, education, law, the health care services] where it is important to build a bridge of relevancy between the theoretical concepts learned in the classroom and the practice of actually doing the work you are being taught to do. Field reports are also common in certain science disciplines [e.g., geology] but these reports are organized differently and serve a different purpose than what is described below.

Professors will assign a field report with the intention of improving your understanding of key theoretical concepts by applying methods of careful and structured observation of, and reflection about, people, places, or phenomena existing in their natural settings. Field reports facilitate the development of data collection techniques and observation skills and they help you to understand how theory applies to real world situations. Field reports are also an opportunity to obtain evidence through methods of observing professional practice that contribute to or challenge existing theories.

We are all observers of people, their interactions, places, and events; however, your responsibility when writing a field report is to conduct research based on data generated by the act of designing a specific study, deliberate observation, synthesis of key findings, and interpretation of their meaning.

When writing a field report you need to:

• Systematically observe and accurately record the varying aspects of a situation . Always approach your field study with a detailed protocol about what you will observe, where you should conduct your observations, and the method by which you will collect and record your data.
• Continuously analyze your observations . Always look for the meaning underlying the actions you observe. Ask yourself: What's going on here? What does this observed activity mean? What else does this relate to? Note that this is an on-going process of reflection and analysis taking place for the duration of your field research.
• Keep the report’s aims in mind while you are observing . Recording what you observe should not be done randomly or haphazardly; you must be focused and pay attention to details. Enter the observation site [i.e., "field"] with a clear plan about what you are intending to observe and record in relation to the research problem while, at the same time, being prepared to adapt to changing circumstances as they may arise.
• Consciously observe, record, and analyze what you hear and see in the context of a theoretical framework . This is what separates data gatherings from reporting. The theoretical framework guiding your field research should determine what, when, and how you observe and act as the foundation from which you interpret your findings in relation to the underlying assumptions embedded in the theoretical framework .

Techniques to Record Your Observations Although there is no limit to the type of data gathering techniques you can use, these are the most frequently used methods:

Note Taking This is the most common and easiest method of recording your observations. Tips for taking notes include: organizing some shorthand symbols beforehand so that recording basic or repeated actions does not impede your ability to observe, using many small paragraphs, which reflect changes in activities, who is talking, etc., and, leaving space on the page so you can write down additional thoughts and ideas about what’s being observed, any theoretical insights, and notes to yourself that are set aside for further investigation. See drop-down tab for additional information about note-taking.

Photography With the advent of smart phones, an almost unlimited number of high quality photographs can be taken of the objects, events, and people observed during a field study. Photographs can help capture an important moment in time as well as document details about the space where your observation takes place. Taking a photograph can save you time in documenting the details of a space that would otherwise require extensive note taking. However, be aware that flash photography could undermine your ability to observe unobtrusively so assess the lighting in your observation space; if it's too dark, you may need to rely on taking notes. Also, you should reject the idea that photographs represent some sort of "window into the world" because this assumption creates the risk of over-interpreting what they show. As with any product of data gathering, you are the sole instrument of interpretation and meaning-making, not the object itself. Video and Audio Recordings Video or audio recording your observations has the positive effect of giving you an unfiltered record of the observation event. It also facilitates repeated analysis of your observations. This can be particularly helpful as you gather additional information or insights during your research. However, these techniques have the negative effect of increasing how intrusive you are as an observer and will often not be practical or even allowed under certain circumstances [e.g., interaction between a doctor and a patient] and in certain organizational settings [e.g., a courtroom]. Illustrations/Drawings This does not refer to an artistic endeavor but, rather, refers to the possible need, for example, to draw a map of the observation setting or illustrating objects in relation to people's behavior. This can also take the form of rough tables, charts, or graphs documenting the frequency and type of activities observed. These can be subsequently placed in a more readable format when you write your field report. To save time, draft a table [i.e., columns and rows] on a separate piece of paper before an observation if you know you will be entering data in that way.

NOTE:   You may consider using a laptop or other electronic device to record your notes as you observe, but keep in mind the possibility that the clicking of keys while you type or noises from your device can be obtrusive, whereas writing your notes on paper is relatively quiet and unobtrusive. Always assess your presence in the setting where you're gathering the data so as to minimize your impact on the subject or phenomenon being studied.

ANOTHER NOTE:   Techniques of deliberate observation and data gathering are not innate skills; they are skills that must be learned and practiced in order to achieve proficiency. Before your first observation, practice the technique you plan to use in a setting similar to your study site [e.g., take notes about how people choose to enter checkout lines at a grocery store if your research involves examining the choice patterns of unrelated people forced to queue in busy social settings]. When the act of data gathering counts, you'll be glad you practiced beforehand.

YET ANOTHER NOTE:   An issue rarely discussed in the literature about conducting field research is whether you should move around the study site while observing or remaining situated in one place. Moving around can be intrusive, but it facilitates observing people's behavior from multiple vectors. However, if you remain in one place throughout the observation [or during each observation], you will eventually blend into the background and diminish the chance of unintentionally influencing people's behavior. If the site has a complex set of interactions or interdependent activities [e.g., a play ground], consider moving around; if the study site is relatively fixed [e.g., a classroom], then consider staying in one place while observing.

Examples of Things to Document While Observing

• Physical setting . The characteristics of an occupied space and the human use of the place where the observation(s) are being conducted.
• Objects and material culture . This refers to the presence, placement, and arrangement of objects that impact the behavior or actions of those being observed. If applicable, describe the cultural artifacts representing the beliefs [i.e., the values, ideas, attitudes, and assumptions] of the individuals you are observing [e.g., the choice of particular types of clothing in the observation of family gatherings during culturally specific holidays].
• Use of language . Don't just observe but  listen to what is being said, how is it being said, and the tone of conversations among participants.
• Behavior cycles . This refers to documenting when and who performs what behavior or task and how often they occur. Record at which stage this behavior is occurring within the setting.
• The order in which events unfold . Note sequential patterns of behavior or the moment when actions or events take place and their significance. Also, be prepared to note moments that diverge from these sequential patterns of behavior or actions.
• Physical characteristics of subjects. If relevant, document personal characteristics of individuals being observed. Note that, unless this data can be verified in interviews or from documentary evidence, you should only focus on characteristics that can be clearly observed [e.g., clothing, physical appearance, body language].
• Expressive body movements . This would include things like body posture or facial expressions. Note that it may be relevant to also assess whether expressive body movements support or contradict the language used in conversation [e.g., detecting sarcasm].

Brief notes about all of these examples contextualize your observations; however, your observation notes will be guided primarily by your theoretical framework, keeping in mind that your observations will feed into and potentially modify or alter these frameworks.

Sampling Techniques

Sampling refers to the process used to select a portion of the population for study . Qualitative research, of which observation is one method of data gathering, is generally based on non-probability and purposive sampling rather than probability or random approaches characteristic of quantitatively-driven studies. Sampling in observational research is flexible and often continues until no new themes emerge from the data, a point referred to as data saturation.

All sampling decisions are made for the explicit purpose of obtaining the richest possible source of information to answer the research questions. Decisions about sampling assumes you know what you want to observe, what behaviors are important to record, and what research problem you are addressing before you begin the study. These questions determine what sampling technique you should use, so be sure you have adequately answered them before selecting a sampling method.

Ways to sample when conducting an observation include:

• Ad Libitum Sampling -- this approach is not that different from what people do at the zoo; they observe whatever seems interesting at the moment. There is no organized system of recording the observations; you just note whatever seems relevant at the time. The advantage of this method is that you are often able to observe relatively rare or unusual behaviors that might be missed by more deliberately designed sampling methods. This method is also useful for obtaining preliminary observations that can be used to develop your final field study. Problems using this method include the possibility of inherent bias toward conspicuous behaviors or individuals, thereby missing mundane or repeated patterns of behavior, and that you may miss brief interactions in social settings.
• Behavior Sampling -- this involves watching the entire group of subjects and recording each occurrence of a specific behavior of interest and with reference to which individuals were involved. The method is useful in recording rare behaviors missed by other sampling methods and is often used in conjunction with focal or scan methods [see below]. However, sampling can be biased towards particular conspicuous behaviors.
• Continuous Recording -- provides a faithful record of behavior including frequencies, durations, and latencies [the time that elapses between a stimulus and the response to it]. This is a very demanding method because you are trying to record everything within the setting and, thus, measuring reliability may be sacrificed. In addition, durations and latencies are only reliable if subjects remain present throughout the collection of data. However, this method facilitates analyzing sequences of behaviors and ensures obtaining a wealth of data about the observation site and the people within it. The use of audio or video recording is most useful with this type of sampling.
• Focal Sampling -- this involves observing one individual for a specified amount of time and recording all instances of that individual's behavior. Usually you have a set of predetermined categories or types of behaviors that you are interested in observing [e.g., when a teacher walks around the classroom] and you keep track of the duration of those behaviors. This approach doesn't tend to bias one behavior over another and provides significant detail about a individual's behavior. However, with this method, you likely have to conduct a lot of focal samples before you have a good idea about how group members interact. It can also be difficult within certain settings to keep one individual in sight for the entire period of the observation without being intrusive.
• Instantaneous Sampling -- this is where observation sessions are divided into short intervals divided by sample points. At each sample point the observer records if predetermined behaviors of interest are taking place. This method is not effective for recording discrete events of short duration and, frequently, observers will want to record novel behaviors that occur slightly before or after the point of sampling, creating a sampling error. Though not exact, this method does give you an idea of durations and is relatively easy to do. It is also good for recording behavior patterns occurring at a specific instant, such as, movement or body positions.
• One-Zero Sampling -- this is very similar to instantaneous sampling, only the observer records if the behaviors of interest have occurred at any time during an interval instead of at the instant of the sampling point. The method is useful for capturing data on behavior patterns that start and stop repeatedly and rapidly, but that last only for a brief period of time. The disadvantage of this approach is that you get a dimensionless score for an entire recording session, so you only get one one data point for each recording session.
• Scan Sampling -- this method involves taking a census of the entire observed group at predetermined time periods and recording what each individual is doing at that moment. This is useful for obtaining group behavioral data and allows for data that are evenly representative across individuals and periods of time. On the other hand, this method may be biased towards more conspicuous behaviors and you may miss a lot of what is going on between observations, especially rare or unusual behaviors. It is also difficult to record more than a few individuals in a group setting without missing what each individual is doing at each predetermined moment in time [e.g., children sitting at a table during lunch at school]. The use of audio or video recording is useful with this type of sampling.

Alderks, Peter. Data Collection. Psychology 330 Course Documents. Animal Behavior Lab. University of Washington; Emerson, Robert M. Contemporary Field Research: Perspectives and Formulations . 2nd ed. Prospect Heights, IL: Waveland Press, 2001; Emerson, Robert M. et al. “Participant Observation and Fieldnotes.” In Handbook of Ethnography . Paul Atkinson et al., eds. (Thousand Oaks, CA: Sage, 2001), 352-368; Emerson, Robert M. et al. Writing Ethnographic Fieldnotes . 2nd ed. Chicago, IL: University of Chicago Press, 2011; Ethnography, Observational Research, and Narrative Inquiry. Writing@CSU. Colorado State University; Hazel, Spencer. "The Paradox from Within: Research Participants Doing-Being-Observed." Qualitative Research 16 (August 2016): 446-457; Pace, Tonio. Writing Field Reports. Scribd Online Library; Presser, Jon and Dona Schwartz. “Photographs within the Sociological Research Process.” In Image-based Research: A Sourcebook for Qualitative Researchers . Jon Prosser, editor (London: Falmer Press, 1998), pp. 115-130; Pyrczak, Fred and Randall R. Bruce. Writing Empirical Research Reports: A Basic Guide for Students of the Social and Behavioral Sciences . 5th ed. Glendale, CA: Pyrczak Publishing, 2005; Report Writing. UniLearning. University of Wollongong, Australia; Wolfinger, Nicholas H. "On Writing Fieldnotes: Collection Strategies and Background Expectancies.” Qualitative Research 2 (April 2002): 85-95; Writing Reports. Anonymous. The Higher Education Academy.

Structure and Writing Style

How you choose to format your field report is determined by the research problem, the theoretical framework that is driving your analysis, the observations that you make, and/or specific guidelines established by your professor. Since field reports do not have a standard format, it is worthwhile to determine from your professor what the preferred structure and organization should be before you begin to write. Note that field reports should be written in the past tense. With this in mind, most field reports in the social sciences include the following elements:

I.  Introduction The introduction should describe the research problem, the specific objectives of your research, and the important theories or concepts underpinning your field study. The introduction should describe the nature of the organization or setting where you are conducting the observation, what type of observations you have conducted, what your focus was, when you observed, and the methods you used for collecting the data. Collectively, this descriptive information should support reasons why you chose the observation site and the people or events within it. You should also include a review of pertinent literature related to the research problem, particularly if similar methods were used in prior studies. Conclude your introduction with a statement about how the rest of the paper is organized.

II.  Description of Activities

Your readers only knowledge and understanding of what happened will come from the description section of your report because they were not witnesses to the situation, people, or events that you are writing about. Given this, it is crucial that you provide sufficient details to place the analysis that will follow into proper context; don't make the mistake of providing a description without context. The description section of a field report is similar to a well written piece of journalism. Therefore, a useful approach to systematically describing the varying aspects of an observed situation is to answer the "Five W’s of Investigative Reporting." As Dubbels notes [p. 19], these are:

• What -- describe what you observed. Note the temporal, physical, and social boundaries you imposed to limit the observations you made. What were your general impressions of the situation you were observing. For example, as a student teacher, what is your impression of the application of iPads as a learning device in a history class; as a cultural anthropologist, what is your impression of women's participation in a Native American religious ritual?
• Where -- provide background information about the setting of your observation and, if necessary, note important material objects that are present that help contextualize the observation [e.g., arrangement of computers in relation to student engagement with the teacher].
• When -- record factual data about the day and the beginning and ending time of each observation. Note that it may also be necessary to include background information or key events which impact upon the situation you were observing [e.g., observing the ability of teachers to re-engage students after coming back from an unannounced fire drill].
• Who -- note background and demographic information about the individuals being observed e.g., age, gender, ethnicity, and/or any other variables relevant to your study]. Record who is doing what and saying what, as well as, who is not doing or saying what. If relevant, be sure to record who was missing from the observation.
• Why -- why were you doing this? Describe the reasons for selecting particular situations to observe. Note why something happened. Also note why you may have included or excluded certain information.

III.  Interpretation and Analysis

Always place the analysis and interpretations of your field observations within the larger context of the theoretical assumptions and issues you described in the introduction. Part of your responsibility in analyzing the data is to determine which observations are worthy of comment and interpretation, and which observations are more general in nature. It is your theoretical framework that allows you to make these decisions. You need to demonstrate to the reader that you are conducting the field work through the eyes of an informed viewer and from the perspective of a casual observer.

Here are some questions to ask yourself when analyzing your observations:

• What is the meaning of what you have observed?
• Why do you think what you observed happened? What evidence do you have for your reasoning?
• What events or behaviors were typical or widespread? If appropriate, what was unusual or out of the ordinary? How were they distributed among categories of people?
• Do you see any connections or patterns in what you observed?
• Why did the people you observed proceed with an action in the way that they did? What are the implications of this?
• Did the stated or implicit objectives of what you were observing match what was achieved?
• What were the relative merits of the behaviors you observed?
• What were the strengths and weaknesses of the observations you recorded?
• Do you see connections between what you observed and the findings of similar studies identified from your review of the literature?
• How do your observations fit into the larger context of professional practice? In what ways have your observations possibly changed or affirmed your perceptions of professional practice?
• Have you learned anything from what you observed?

NOTE:   Only base your interpretations on what you have actually observed. Do not speculate or manipulate your observational data to fit into your study's theoretical framework.

IV.  Conclusion and Recommendations

The conclusion should briefly recap of the entire study, reiterating the importance or significance of your observations. Avoid including any new information. You should also state any recommendations you may have based on the results of your study. Be sure to describe any unanticipated problems you encountered and note the limitations of your study. The conclusion should not be more than two or three paragraphs.

V.  Appendix

This is where you would place information that is not essential to explaining your findings, but that supports your analysis [especially repetitive or lengthy information], that validates your conclusions, or that contextualizes a related point that helps the reader understand the overall report. Examples of information that could be included in an appendix are figures/tables/charts/graphs of results, statistics, pictures, maps, drawings, or, if applicable, transcripts of interviews. There is no limit to what can be included in the appendix or its format [e.g., a DVD recording of the observation site], provided that it is relevant to the study's purpose and reference is made to it in the report. If information is placed in more than one appendix ["appendices"], the order in which they are organized is dictated by the order they were first mentioned in the text of the report.

VI.  References

List all sources that you consulted and obtained information from while writing your field report. Note that field reports generally do not include further readings or an extended bibliography. However, consult with your professor concerning what your list of sources should be included and be sure to write them in the preferred citation style of your discipline or is preferred by your professor [i.e., APA, Chicago, MLA, etc.].

Alderks, Peter. Data Collection. Psychology 330 Course Documents. Animal Behavior Lab. University of Washington; Dubbels, Brock R. Exploring the Cognitive, Social, Cultural, and Psychological Aspects of Gaming and Simulations . Hershey, PA: IGI Global, 2018; Emerson, Robert M. Contemporary Field Research: Perspectives and Formulations . 2nd ed. Prospect Heights, IL: Waveland Press, 2001; Emerson, Robert M. et al. “Participant Observation and Fieldnotes.” In Handbook of Ethnography . Paul Atkinson et al., eds. (Thousand Oaks, CA: Sage, 2001), 352-368; Emerson, Robert M. et al. Writing Ethnographic Fieldnotes . 2nd ed. Chicago, IL: University of Chicago Press, 2011; Ethnography, Observational Research, and Narrative Inquiry. Writing@CSU. Colorado State University; Pace, Tonio. Writing Field Reports. Scribd Online Library; Pyrczak, Fred and Randall R. Bruce. Writing Empirical Research Reports: A Basic Guide for Students of the Social and Behavioral Sciences . 5th ed. Glendale, CA: Pyrczak Publishing, 2005; Report Writing. UniLearning. University of Wollongong, Australia; Wolfinger, Nicholas H. "On Writing Fieldnotes: Collection Strategies and Background Expectancies.” Qualitative Research 2 (April 2002): 85-95; Writing Reports. Anonymous. The Higher Education Academy.

• << Previous: Writing a Case Study
• Next: About Informed Consent >>
• Last Updated: Jun 3, 2024 9:44 AM
• URL: https://libguides.usc.edu/writingguide/assignments

How to Write Effective Research Reports

Frankline kibuacha | dec. 02, 2022 | 3 min. read.

A research report is a document that summarizes and provides an analysis of the findings of a research project. It is an important document that serves as a first-hand account of the research process, data, and findings of a research study, and it is typically considered an objective and accurate source of information.

There are a few questions a research report should answer:

• What are you researching?
• What is the goal of your research?
• What are your methods for researching?
• What did you find in your research?
• How does this compare to other findings?
• And what is the impact of this finding on the world?

A research report is normally organized into three broad sections. First, an introduction provides a brief background on the topic and introduces the reader to your perspective. The second section is the body of the report, which should include the research findings and supporting evidence. Finally, the conclusion, which summarizes your arguments and the implications of your study for future research.

Every year, GeoPoll carries out hundreds of research studies and produces reports on several topics, both for clients and internally commissioned studies. In this article, we highlight some tips for writing great reports from our experience.

Tips for writing excellent research reports

• Start from the basics – with an outline – It is a good idea to outline the research context and findings before taking the plunge, as it helps with the flow and structure of the research report. Once you have the broader information well documented, filling the gaps with the content and findings becomes more straightforward and sets the tone for the report.
• Consider the target audience – To guide the report, always keep the target audience in mind and then select a format that is clear, logical and obvious to the audience. A report meant for top decision-makers, for example, could be more concise than one meant for other researchers. Writing for the audience ensures that the research findings help the cause, so consider writing in their language to make it easy to understand at their level.
• Answer the research questions – Every effective research starts with a clear objective. In writing the report, make sure that the data provided contribute to the goal, which is, in reality, the real purpose for conducting the research in the first place.
• Be simple and clear – Research reports need not be complicated. Aim to write the report with an accuracy of details and language that is simplest and clearest to the reader. Use clear titles that clearly describe the following section in a way that readers will want to get into.
• Provide the methodology implemented – Researchers should also include a summary of the methods used to conduct the research, which provides the overall approaches and perspectives of the research process. The methodology details aspects such as the research objectives, the sample used , broken down into demographics such as gender, location, age, and other sample characteristics, data collection modes used, and data analysis methods. Sharing your methodology gives legitimacy to your research.
• Choose graphs correctly – Research reports often feature graphs to bring out data clearly. To fulfill this purpose, the graphs you use in your report must be clear enough so that the readers understand them themselves. Use clear titles, try and include the original question, and choose the best chart types to represent the data.
• Remain relevant – Not everything is genuinely essential to a research report, and you should aim at prioritizing only the significant discoveries. The idea of a research report is to present an abridged yet impactful version of your research, and it’s OK to exclude irrelevant information while highlighting only essential data and findings.
• Grammar and spelling are imperative – Even more important than most writings, research reports need to be written following the best language practices to help to understand the report and not unconsciously water down the seriousness of the information. Read aloud while writing to put yourself in the shoes of the reader. Use grammar and spell-checking tools and engage other people to proofread the report to ensure it reads well for the target audience.
• Choose an impactful title – A good research report title is brief, precise, and provides a clear idea of the underlying research so that readers can grasp the entire focus of your research from the title.
• Shoot for a strong conclusion – The conclusion in the research reports is primarily important because it summarizes the information and recommendations, and often, some readers skim through to the conclusion. Make a precise summary, highlight the findings that stand out, and provide the implications or courses of action derived from the research findings.

Read Free GeoPoll Reports

GeoPoll conducts research worldwide on topics integral to the organizations we serve and the world. You can read and download our reports here for free. Sign up for our newsletter to receive GeoPoll reports as soon as we release them.

Contact us about your upcoming research project and learn how we can help.

Related Posts

How to Write and Design Effective Surveys

Who Owns the Media in Ghana; A Research Project

How to Run B2B Market Research Surveys

A beginner’s guide to writing lab reports and scientific papers

Writing lab reports and scientific papers is a crucial skill in the scientific community.

These documents serve multiple purposes:

They persuade others to accept or reject hypotheses, detail experiments for future reference, and contribute to the broader body of scientific knowledge.

Whether you’re a student or a seasoned researcher, mastering the structure and style of lab reports and scientific papers is key to effectively communicating your findings.

This guide will walk you through the essential components and best practices for crafting a clear, precise, and impactful report.

Table of Contents

Why lab reports matter

Lab reports and scientific papers do more than just record data.

Instead, they serve as a persuasive tool to support or refute hypotheses, provide detailed procedures for replication, and become part of the scientific record.

In general, lab reports and scientific papers serve several critical functions in the world of science:

• Persuade others : These documents present data and interpretations that help others evaluate and possibly accept or reject hypotheses.
• Detail data and procedures : They provide a thorough record of the materials, methods, and results, which future researchers can reference.
• Contribute to scientific knowledge : When published, these reports become part of the accepted scientific literature, unless later disproved.
• Archive research : They create a permanent record of the current state of knowledge and experimental results for future comparison.

The basic format of a lab report

A well-structured lab report typically includes the following sections: title, abstract, introduction, materials and methods, results, discussion, and references.

Each section has a specific role in presenting your research logically and systematically.

The title of your lab report should reflect its factual content in a straightforward manner.

Aim to summarize the essence of your study in fewer than ten words.

Use keywords that are relevant to your field and that will help researchers and search engines find your work.

For example, instead of a vague title like “A Study of Plant Growth,” opt for something more precise like “Effects of Nitrogen Fertilization on Corn Growth.”

• Purpose : The title should succinctly reflect the factual content of the report.
• Best Practices : Keep it under ten words and ensure it includes keywords that are easily recognizable by researchers and search engines.

The abstract is a concise paragraph summarizing the purpose of your report, the key data presented, and the major conclusions.

Typically, the abstract should be between 100 and 200 words.

It should answer the following questions:

• What was the purpose of the study?
• What methods were used?
• What were the key findings?
• And what are the main conclusions?
• Although the abstract appears first in the report, it is often easiest to write it last, after you’ve completed the rest of the report.

Introduction

In the introduction, you should clearly define the subject of your report and explain why the study was performed.

Provide background information and reference relevant studies to give context to your work.

This section should also outline the scientific purpose or objectives of the study, including any specific hypotheses and the experimental design used to test them.

For example, if your report is on the impact of light on plant growth, your introduction might discuss previous studies on photosynthesis and state your hypothesis about how different light intensities will affect plant height.

Materials and methods

This section details the materials used in your experiment, how they were used, and where and when the work was done — particularly important for field studies.

It’s essential to describe any special equipment and the general theory behind the analyses or assays used.

However, avoid overwhelming the reader with unnecessary detail.

If you followed standard procedures from a lab manual or another report, simply cite that work and note that details can be found there.

The goal is to provide enough information for someone else to replicate your experiment without needing to know every minute detail.

Here are the best practices for the materials and method section:

• List of Materials : Include all materials used, how they were used, and the context of the work (e.g., location and timing for field studies).
• Procedure Description : Provide enough detail for the reader to understand the experiment. If you followed a standard procedure, cite the source and note that the details are available there.
• Equipment and Theory : Describe any special equipment and the general theory behind the analyses or assays used.

In the results section, focus on presenting the data without interpreting it — that comes in the discussion section.

Summarize the data, emphasizing general trends and significant differences rather than trivial details.

Ideally, you should organize your data into tables, figures, graphs, or photographs. However, don’t forget to avoid duplicating information.

For example, if you include a graph showing the growth of plants over time, don’t also include a table with the same data points.

Each figure and table should be titled and numbered, with legends explaining any symbols, abbreviations, or special methods used.

When referring to these in your text, be specific: “Figure 1 shows that the activity decreases after five minutes.”

The discussion section is where you interpret the data and explain its significance.

Relate your findings to existing theories and knowledge, and explain the logic behind accepting or rejecting your original hypotheses.

This is also the place to speculate — within reason — and to suggest improvements for your experimental design or areas for further research.

However, be clear when you’re speculating and when you’re basing conclusions on solid evidence. And if your results showed unexpected trends, discuss possible reasons why and propose ways to investigate further.

In the references section, cite only the works that you referred to in your report — this is not a general bibliography.

Alphabetize the references by the last name of the first author and follow the specific citation format recommended by your field or journal.

Proper citation not only gives credit to the original authors but also allows readers to track down the sources of your information.

General writing style for scientific papers

Maintaining a clear, precise, and consistent writing style is crucial for effective scientific communication.

Here are some guidelines:

• Logical and Precise : Aim for clarity and avoid ambiguity, especially with pronouns and sequences.
• Impersonal Tone : Use an impersonal tone, avoiding first-person pronouns like “I” or “we.”
• Consistent Tense : Use the past tense consistently throughout the report. For example, “The experiment was conducted…” instead of “The experiment is conducted…”
• Scientific Nomenclature : Remember that “data” is plural, “datum” is singular, and “species” is both singular and plural. Italicize scientific names (e.g., Homo sapiens ).
• Metric System : Use the metric system for measurements and abbreviate units without periods (e.g., cm, kg). Spell out numbers at the beginning of sentences or when they are less than 10 (e.g., “Two explanations…”).
• Peer Review : Before submitting, have a neutral person review and critique your report to ensure clarity and accuracy.

Final thoughts: Elevate your scientific communication

Writing lab reports and scientific papers might seem daunting at first, but with practice, it becomes an invaluable skill.

These reports are more than just assignments — they are your contribution to the scientific community.

By following the structure and guidelines outlined in this article, you’ll be able to communicate your findings effectively, adding to the body of knowledge in your field and helping to shape future research.

Remember, the goal of scientific writing is not just to report what you did, but to persuade others of the validity of your findings, provide a clear record for future reference, and contribute meaningfully to ongoing scientific dialogue.

Embrace the process, refine your skills, and take pride in the knowledge that your work matters.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

CONTACT INFORMATION

1209 MOUNTAIN ROAD PL NE, STE N, ALBUQUERQUE, NM 87110 (505) 317-7468

STAY CONNECTED

Copyright @2024 Studygs.net - a Study GS LLC Company. All Rights Reserved.

• University of Michigan Library
• Research Guides

The Library Research Process, Step-by-Step

• Reading Scholarly Articles
• Finding & Exploring a Topic
• Finding Books
• Finding Articles
• Evaluating Sources
• Understanding & Using a Citation Style

Reading Scholarly Articles: Step-by-Step

1. Read the Abstract Section

The first step in reading a scholarly article is to read the abstract or summary of the article. Abstracts are always found at the beginning of an article and provide a basic summary or roadmap to the article. The abstract also introduces the purpose of the article.

Take a few minutes to carefully read the abstract of the practice article. Note that the abstract is not formally labeled "abstract" but is called "background and aims." Any summary at the start of an article is considered the abstract.

The abstract should always be read first to make sure the article is relevant to your topic. However, reading the abstract should never replace reading the entire article as the abstract is too brief to be used to fully understand the article.

2. Read the Conclusion Section Reading the conclusion will help you understand the main points of the article and what the authors are attempting to prove. 

3. Read the Introduction Section Now that you have an overview of the article from the abstract and understand the main points the authors are trying to prove from the conclusion, you will want to read the introduction.

4. Read the Results Section

Read the results section. Here are a couple of suggestions for deciphering results:

• If you are a visual learner, the charts may make sense to you.
• If charts are difficult to understand, look over the narrative and then return to the charts.
• Using the charts can help enhance your understanding of the narrative
• Look for works like "important" or "significant" and make special note of these phrases as these usually are signals from the author of an important result.

5. Read the Methods Section Reading the methods section will help you understand how the study or experiment was conducted. It is necessary for other researchers to understand the methods used so that they can replicate the study.

The methods section can also be difficult to read due to technical language used and density of the section. Try circling words, acronyms, and surveys you are unfamiliar with and look them up as those may be important to fully understand the article and may be necessary for future research. 

6. Read the Discussion & Limitations Section

The discussion section is where you will find the researcher's interpretation of the results. The author should answer the article's research question. Remember, you should evaluate the data to form your own conclusions. Don't just accept the author's conclusions without looking at the data for yourself.

Often authors will include a section detailing the limits to their research and their conclusions. The limitation section will usually explain conclusions that could not be drawn from the research as well as areas that future research is needed.

7. Read Through One More Time  After you have jumped around and read the different sections of the article, go back to the beginning and read the article in order. The article should be easier to read and make more sense as you will already be familiar with the main points in each section.

Watch: How to Read a Scholarly Article

Why Watch This Video? You'll learn essential strategies for reading scientific or scholarly journal articles, including:

• Identifying distinct sections (abstract, introduction, methods, results, discussion) and the purpose of those sections 
• How to effectively skim content using the ADIRM process (Abstract, Discussion, Introduction, Results, Methods), which will help you assess scholarly articles' relevance and validity
• Distinguishing between main points and less relevant sub points within scholarly research articles. 
• Learning about and applying these techniques will save you time and effort when working through your course assignments.

Talk to our experts

1800-120-456-456

• How to Write a Report?

Step-by-Step Guide to Creating Effective Reports

Writing a report involves presenting information clearly and systematically. Whether it's for a school project, a business analysis, or a research study, a well-written report helps communicate findings and recommendations effectively. This guide will walk you through the key steps in writing a report, from planning and research to drafting and editing. With practical tips and examples, you'll learn how to structure your report to ensure it is informative and professional.

What is a Report?

A report is a structured document that presents information on a specific topic or issue. It typically includes an introduction, methodology, findings, and conclusions. Reports are used to communicate research results, analysis, or updates on a project. They aim to provide clear and objective information to help readers make informed decisions or understand a particular subject.

How to Prepare a Report?

Understand the Purpose : Clearly define the objective of the report. Knowing the purpose helps in gathering relevant information and focusing on key points.

Research and Gather Data : Collect accurate and relevant data from credible sources. This information forms the basis of your report and supports your findings.

Organise Information : Structure the report logically, using sections like introduction, methodology, findings, and conclusion. This helps in presenting information clearly and coherently.

Draft the Report : Write the report, ensuring it is clear and concise. Follow the structure and keep the language straightforward to make the report easy to read.

Review and Edit : Check the draft for errors and clarity. Revise any sections that are unclear or inaccurate to ensure the report is polished and professional.

Format the Report : Use appropriate formatting, including headings, subheadings, and visuals like charts or graphs. This enhances readability and helps in presenting information effectively.

Proofread : Carefully check for grammatical and spelling errors. Proofreading ensures the report is error-free and maintains a high standard of professionalism.

What to Include in a Report?

Title Page : Contains the report’s title, author’s name, and date. It provides essential information about the report’s identity.

Executive Summary : A concise overview of the report’s main points and conclusions. It helps readers quickly understand the key findings and recommendations.

Table of Contents : Lists all the sections and sub-sections of the report with page numbers . It allows readers to easily navigate through the report.

Introduction : Introduces the purpose, scope, and objectives of the report. It sets the context for the information that follows.

Methodology : Explains the methods used to collect and analyse data. It helps readers understand how the findings were derived.

Findings/Results : Presents the data and analysis. This section shows the outcomes of the research or investigation.

Discussion/Analysis : Interprets the findings and discusses their implications. It provides insights and explains the significance of the results.

Conclusion : Summarizes the main findings and provides recommendations or next steps. It wraps up the report and offers actionable insights.

References/Bibliography : Lists the sources of information used in the report. It gives credit to the original authors and allows readers to verify the information.

Appendices : Includes supplementary material such as raw data or detailed calculations. This section provides additional details that support the main content of the report.

Types of Reports

Informational reports:.

Purpose : To present data and factual information without offering any analysis or recommendations.

Examples : Progress reports, meeting minutes, and status reports.

Analytical Reports:

Purpose : To analyse information and provide insights or conclusions based on the data. These reports often include recommendations.

Examples : Research reports, feasibility studies, and market analysis reports.

Research Reports:

Purpose : To document the findings of a research study, including the methodology, results, and conclusions.

Examples : Academic research papers, scientific studies, and survey results.

Technical Reports:

Purpose : To explain technical processes or information in a clear and detailed manner. They often include technical data and analysis.

Examples : Engineering reports, software documentation, and scientific research findings.

Proposal Reports:

Purpose : To propose a course of action or project, including objectives, methods, and anticipated outcomes.

Examples : Business proposals, grant proposals, and project plans.

Annual Reports:

Purpose : To provide a summary of an organisation’s activities, performance, and financial status over the past year.

Examples : Corporate annual reports, non-profit annual reports, and government agency annual reports.

Compliance Reports:

Purpose : To demonstrate that an organisation or individual is adhering to regulatory or policy requirements.

Examples : Environmental compliance reports, financial compliance reports, and safety compliance reports.

Incident Reports:

Purpose : To document details of an incident or event, including the circumstances, actions taken, and outcomes.

Examples : Accident reports, security incident reports, and operational disruption reports.

Sales Reports:

Purpose : To present information about sales performance, trends, and forecasts.

Examples : Monthly sales reports, quarterly sales summaries, and sales performance analysis.

Financial Reports:

Purpose : To provide detailed information about an organisation’s financial status and performance.

Examples : Income statements, balance sheets, and cash flow statements.

Report Writing Format

Title page:.

Content : Report title, author’s name, date, and any other relevant information (e.g., organization’s name, report number).

Table of Contents:

Content : List of sections and sub-sections with page numbers.

Executive Summary:

Content : Brief overview of the report’s purpose, main findings, conclusions, and recommendations. Usually written last but placed at the beginning.

Introduction:

Content : Background information, purpose of the report, scope, and objectives.

Methodology (if applicable):

Content : Explanation of how the research or analysis was conducted, including data collection methods and procedures.

Findings/Results:

Content : Detailed presentation of the data or information collected. This section often includes charts, graphs, and tables.

Discussion:

Content : Interpretation and analysis of the findings. Discuss the implications and relevance of the results.

Conclusion:

Content : Summary of the main findings, conclusions drawn from the data, and the significance of the results.

Recommendations (if applicable):

Content : Suggestions for action based on the findings and conclusions.

References:

Content : List of all sources and references used in the report. Follow a specific citation style (e.g., APA, MLA).

Appendices (if applicable):

Content : Supplementary material that supports the report but is too detailed to include in the main sections. Examples include raw data, detailed calculations, or additional documents.

Key Points on Report Writing in English

Purpose and Audience : Understand the purpose of the report and who will read it to tailor the content accordingly.

Structure : Follow a clear structure with a title page, table of contents, executive summary, introduction, methodology, findings, discussion, conclusion, recommendations, references, and appendices.

Clarity and Precision : Use clear and concise language. Avoid jargon and complex sentences to ensure the report is easily understandable.

Objective Presentation : Present findings and data objectively. Avoid personal opinions unless they are part of the analysis.

Evidence-Based : Support your findings with evidence and data. Include charts, graphs, and tables where applicable.

Formatting : Use consistent formatting throughout the report. This includes headings, subheadings, font size, and style.

Proofreading : Carefully proofread the report for spelling, grammar, and punctuation errors before submission.

What is the Structure of a Report?

The structure of a report generally includes:

A brief overview of the main points, findings, and recommendations. It helps readers quickly grasp the key content of the report.

Introduces the topic of the report, its purpose, and what the report will cover. It provides background information necessary for understanding the rest of the report.

Contains the main details of the report. This section is divided into headings and subheadings, covering methods, results, and analysis.

Summarises the main findings and provides final thoughts or recommendations. It wraps up the report by highlighting the key conclusions.

Additional Sections:

Title Page : Includes the report’s title, author, and date.

Table of Contents : Lists sections and their page numbers for easy navigation.

References : Lists sources used in the report.

Appendices : Contains extra material like data or detailed information that supports the report.

Report Writing Examples

Here’s a simple example of a report on a hypothetical study about workplace productivity:

Title: Report on Workplace Productivity Improvements

Executive Summary: This report examines recent efforts to enhance workplace productivity within XYZ Corporation. Over the past six months, several strategies were implemented, including new training programs, changes in work environment , and the introduction of productivity tools. The results show a significant improvement in overall productivity and employee satisfaction.

Introduction: The purpose of this report is to evaluate the effectiveness of the recent initiatives aimed at improving workplace productivity at XYZ Corporation. The initiatives were introduced to address concerns about declining performance and employee engagement. This report presents findings based on data collected from employee surveys, productivity metrics, and feedback from management.

1. Training Programs: New training programs were introduced to enhance employee skills. These programs included workshops on time management, effective communication , and project management.

Employee skill levels improved, as evidenced by increased performance on internal assessments.

80% of participants reported feeling more confident in their roles.

2. Changes in Work Environment: The office layout was redesigned to create a more open and collaborative space. Noise-reducing materials were added, and additional break areas were established.

Employees reported a more comfortable and less distracting work environment.

70% of employees indicated that the new layout positively impacted their work efficiency.

3. Productivity Tools: New productivity tools, such as project management software and task tracking applications, were implemented.

Project completion times decreased by 15%.

The use of task-tracking tools improved project visibility and team coordination.

Conclusion: The initiatives undertaken by XYZ Corporation have led to noticeable improvements in workplace productivity. Training programs have enhanced employee skills, changes in the work environment have fostered a better working atmosphere, and productivity tools have streamlined project management. It is recommended to continue these strategies and explore additional areas for improvement.

Appendices:

Employee Survey Results

Productivity Metrics

Feedback from Management

Check Your Understanding of Writing a Report

What is the purpose of an executive summary in a report?

How does the introduction section of a report differ from the body?

What should you include in the body of a report?

What is the main goal of the conclusion section in a report?

Why is it important to have headings and subheadings in the body of a report?

What additional elements might be included in a formal report aside from the introduction, body, and conclusion?

How can you ensure that your report is clear and easy to follow?

What role does a title page play in a report?

When might a report require a table of contents?

How should personal opinions be presented in a report?

What kind of information should be included in the introduction to set up the report?

Why is it important to summarize the main findings in the executive summary?

Find Out if You Got them All Right from the Answers Below.

The executive summary provides a concise overview of the main findings and conclusions of the report.

The introduction sets up the topic and background, while the body contains detailed analysis and findings.

The body includes detailed information, analysis, findings, and evidence, organised with headings and subheadings.

The conclusion summarizes key findings and offers interpretations or recommendations.

Headings and subheadings help organise content, making it easier to navigate and understand.

Additional elements can include a title page, table of contents, executive summary, appendices, and references.

Ensure clarity by using clear language, organising information logically, and providing a structured layout.

The title page provides essential information about the report, including title, author, and date.

A table of contents is useful for longer reports with multiple sections or chapters.

Personal opinions should be supported by evidence and clearly distinguished from factual information.

The introduction should include background information, the purpose of the report, the scope, and relevant context.

Summarising the main findings in the executive summary helps readers quickly understand the essential conclusions.

Takeaways from this Page

Executive Summary : Provides a concise overview of the report's main findings and recommendations.

Introduction : Sets the context by introducing the topic, purpose, and background information.

Body : Presents the core content, including detailed findings, analysis, and discussions, organised under relevant headings and subheadings.

Conclusion : Summarizes the main insights, offering conclusions and recommendations.

Additional Sections : Include the title page, table of contents, references, and appendices for completeness and easy navigation.

FAQs on How to Write a Report?

1. What is the report writing format?

The report writing format generally includes an executive summary, introduction, body, and conclusion, and may also include a title page and table of contents.

2. What is report writing?

Report writing involves creating a structured document that presents information, analysis, and findings on a specific topic.

3. How to prepare a report?

To prepare a report, gather and analyse information, structure your findings into sections, and ensure clarity and accuracy in your presentation.

4. What are the key elements of report writing in English?

Key elements include the introduction, body, conclusion, and any supplementary sections like the executive summary or appendices.

5. Can you provide examples of report writing?

Examples of report writing can include business reports, research reports, project reports, and academic papers.

6. How to write report writing?

Writing a report involves outlining your content, drafting sections clearly, and revising for coherence and accuracy.

7. What should be included in the report writing format?

The format typically includes an introduction, body with headings and subheadings, conclusion, and any additional sections like a title page and table of contents.

8. What is the purpose of report writing?

The purpose of report writing is to convey information, analysis, and findings in a clear and structured manner.

9. How do you structure a report?

A report is structured with an introduction, detailed body sections, a conclusion, and possibly an executive summary and additional appendices.

10. What is the role of the introduction in report writing?

The introduction sets up the context, purpose, and scope of the report, providing background information and a preview of what will be discussed.

11. How should the body of a report be organised?

The body should be organised with clear headings and subheadings, presenting information in a logical sequence with supporting evidence and analysis.

12. What are some examples of report writing formats?

Examples include business reports, academic research reports, project reports, and scientific research reports, each following a similar basic structure.

• Article Information

Data Sharing Statement

• As Ozempic’s Popularity Soars, Here’s What to Know About Semaglutide and Weight Loss JAMA Medical News & Perspectives May 16, 2023 This Medical News article discusses chronic weight management with semaglutide, sold under the brand names Ozempic and Wegovy. Melissa Suran, PhD, MSJ
• Patents and Regulatory Exclusivities on GLP-1 Receptor Agonists JAMA Special Communication August 15, 2023 This Special Communication used data from the US Food and Drug Administration to analyze how manufacturers of brand-name glucagon-like peptide 1 (GLP-1) receptor agonists have used patent and regulatory systems to extend periods of market exclusivity. Rasha Alhiary, PharmD; Aaron S. Kesselheim, MD, JD, MPH; Sarah Gabriele, LLM, MBE; Reed F. Beall, PhD; S. Sean Tu, JD, PhD; William B. Feldman, MD, DPhil, MPH
• What to Know About Wegovy’s Rare but Serious Adverse Effects JAMA Medical News & Perspectives December 12, 2023 This Medical News article discusses Wegovy, Ozempic, and other GLP-1 receptor agonists used for weight management and type 2 diabetes. Kate Ruder, MSJ
• GLP-1 Receptor Agonists and Gastrointestinal Adverse Events—Reply JAMA Comment & Response March 12, 2024 Ramin Rezaeianzadeh, BSc; Mohit Sodhi, MSc; Mahyar Etminan, PharmD, MSc
• GLP-1 Receptor Agonists and Gastrointestinal Adverse Events JAMA Comment & Response March 12, 2024 Karine Suissa, PhD; Sara J. Cromer, MD; Elisabetta Patorno, MD, DrPH
• GLP-1 Receptor Agonist Use and Risk of Postoperative Complications JAMA Research Letter May 21, 2024 This cohort study evaluates the risk of postoperative respiratory complications among patients with diabetes undergoing surgery who had vs those who had not a prescription fill for glucagon-like peptide 1 receptor agonists. Anjali A. Dixit, MD, MPH; Brian T. Bateman, MD, MS; Mary T. Hawn, MD, MPH; Michelle C. Odden, PhD; Eric C. Sun, MD, PhD
• Glucagon-Like Peptide-1 Receptor Agonist Use and Risk of Gallbladder and Biliary Diseases JAMA Internal Medicine Original Investigation May 1, 2022 This systematic review and meta-analysis of 76 randomized clinical trials examines the effects of glucagon-like peptide-1 receptor agonist use on the risk of gallbladder and biliary diseases. Liyun He, MM; Jialu Wang, MM; Fan Ping, MD; Na Yang, MM; Jingyue Huang, MM; Yuxiu Li, MD; Lingling Xu, MD; Wei Li, MD; Huabing Zhang, MD
• Cholecystitis Associated With the Use of Glucagon-Like Peptide-1 Receptor Agonists JAMA Internal Medicine Research Letter October 1, 2022 This case series identifies cases reported in the US Food and Drug Administration Adverse Event Reporting System of acute cholecystitis associated with use of glucagon-like peptide-1 receptor agonists that did not have gallbladder disease warnings in their labeling. Daniel Woronow, MD; Christine Chamberlain, PharmD; Ali Niak, MD; Mark Avigan, MDCM; Monika Houstoun, PharmD, MPH; Cindy Kortepeter, PharmD

See More About

Select your interests.

Customize your JAMA Network experience by selecting one or more topics from the list below.

• Academic Medicine
• Acid Base, Electrolytes, Fluids
• Allergy and Clinical Immunology
• American Indian or Alaska Natives
• Anesthesiology
• Anticoagulation
• Art and Images in Psychiatry
• Artificial Intelligence
• Assisted Reproduction
• Bleeding and Transfusion
• Caring for the Critically Ill Patient
• Challenges in Clinical Electrocardiography
• Climate and Health
• Climate Change
• Clinical Challenge
• Clinical Decision Support
• Clinical Implications of Basic Neuroscience
• Clinical Pharmacy and Pharmacology
• Complementary and Alternative Medicine
• Consensus Statements
• Coronavirus (COVID-19)
• Critical Care Medicine
• Cultural Competency
• Dental Medicine
• Dermatology
• Diabetes and Endocrinology
• Diagnostic Test Interpretation
• Drug Development
• Electronic Health Records
• Emergency Medicine
• End of Life, Hospice, Palliative Care
• Environmental Health
• Equity, Diversity, and Inclusion
• Facial Plastic Surgery
• Gastroenterology and Hepatology
• Genetics and Genomics
• Genomics and Precision Health
• Global Health
• Guide to Statistics and Methods
• Hair Disorders
• Health Care Delivery Models
• Health Care Economics, Insurance, Payment
• Health Care Quality
• Health Care Reform
• Health Care Safety
• Health Care Workforce
• Health Disparities
• Health Inequities
• Health Policy
• Health Systems Science
• History of Medicine
• Hypertension
• Images in Neurology
• Implementation Science
• Infectious Diseases
• Innovations in Health Care Delivery
• JAMA Infographic
• Law and Medicine
• Leading Change
• Less is More
• LGBTQIA Medicine
• Lifestyle Behaviors
• Medical Coding
• Medical Devices and Equipment
• Medical Education
• Medical Education and Training
• Medical Journals and Publishing
• Mobile Health and Telemedicine
• Narrative Medicine
• Neuroscience and Psychiatry
• Notable Notes
• Nutrition, Obesity, Exercise
• Obstetrics and Gynecology
• Occupational Health
• Ophthalmology
• Orthopedics
• Otolaryngology
• Pain Medicine
• Palliative Care
• Pathology and Laboratory Medicine
• Patient Care
• Patient Information
• Performance Improvement
• Performance Measures
• Perioperative Care and Consultation
• Pharmacoeconomics
• Pharmacoepidemiology
• Pharmacogenetics
• Pharmacy and Clinical Pharmacology
• Physical Medicine and Rehabilitation
• Physical Therapy
• Physician Leadership
• Population Health
• Primary Care
• Professional Well-being
• Professionalism
• Psychiatry and Behavioral Health
• Public Health
• Pulmonary Medicine
• Regulatory Agencies
• Reproductive Health
• Research, Methods, Statistics
• Resuscitation
• Rheumatology
• Risk Management
• Scientific Discovery and the Future of Medicine
• Shared Decision Making and Communication
• Sleep Medicine
• Sports Medicine
• Stem Cell Transplantation
• Substance Use and Addiction Medicine
• Surgical Innovation
• Surgical Pearls
• Teachable Moment
• Technology and Finance
• The Art of JAMA
• The Arts and Medicine
• The Rational Clinical Examination
• Tobacco and e-Cigarettes
• Translational Medicine
• Trauma and Injury
• Treatment Adherence
• Ultrasonography
• Users' Guide to the Medical Literature
• Vaccination
• Venous Thromboembolism
• Veterans Health
• Women's Health
• Workflow and Process
• Wound Care, Infection, Healing

Others Also Liked

• Download PDF
• X Facebook More LinkedIn

Sodhi M , Rezaeianzadeh R , Kezouh A , Etminan M. Risk of Gastrointestinal Adverse Events Associated With Glucagon-Like Peptide-1 Receptor Agonists for Weight Loss. JAMA. 2023;330(18):1795–1797. doi:10.1001/jama.2023.19574

Manage citations:

© 2024

• Permissions

Risk of Gastrointestinal Adverse Events Associated With Glucagon-Like Peptide-1 Receptor Agonists for Weight Loss

• 1 Faculty of Medicine, University of British Columbia, Vancouver, British Columbia, Canada
• 2 StatExpert Ltd, Laval, Quebec, Canada
• 3 Department of Ophthalmology and Visual Sciences and Medicine, University of British Columbia, Vancouver, Canada
• Medical News & Perspectives As Ozempic’s Popularity Soars, Here’s What to Know About Semaglutide and Weight Loss Melissa Suran, PhD, MSJ JAMA
• Special Communication Patents and Regulatory Exclusivities on GLP-1 Receptor Agonists Rasha Alhiary, PharmD; Aaron S. Kesselheim, MD, JD, MPH; Sarah Gabriele, LLM, MBE; Reed F. Beall, PhD; S. Sean Tu, JD, PhD; William B. Feldman, MD, DPhil, MPH JAMA
• Medical News & Perspectives What to Know About Wegovy’s Rare but Serious Adverse Effects Kate Ruder, MSJ JAMA
• Comment & Response GLP-1 Receptor Agonists and Gastrointestinal Adverse Events—Reply Ramin Rezaeianzadeh, BSc; Mohit Sodhi, MSc; Mahyar Etminan, PharmD, MSc JAMA
• Comment & Response GLP-1 Receptor Agonists and Gastrointestinal Adverse Events Karine Suissa, PhD; Sara J. Cromer, MD; Elisabetta Patorno, MD, DrPH JAMA
• Research Letter GLP-1 Receptor Agonist Use and Risk of Postoperative Complications Anjali A. Dixit, MD, MPH; Brian T. Bateman, MD, MS; Mary T. Hawn, MD, MPH; Michelle C. Odden, PhD; Eric C. Sun, MD, PhD JAMA
• Original Investigation Glucagon-Like Peptide-1 Receptor Agonist Use and Risk of Gallbladder and Biliary Diseases Liyun He, MM; Jialu Wang, MM; Fan Ping, MD; Na Yang, MM; Jingyue Huang, MM; Yuxiu Li, MD; Lingling Xu, MD; Wei Li, MD; Huabing Zhang, MD JAMA Internal Medicine
• Research Letter Cholecystitis Associated With the Use of Glucagon-Like Peptide-1 Receptor Agonists Daniel Woronow, MD; Christine Chamberlain, PharmD; Ali Niak, MD; Mark Avigan, MDCM; Monika Houstoun, PharmD, MPH; Cindy Kortepeter, PharmD JAMA Internal Medicine

Glucagon-like peptide 1 (GLP-1) agonists are medications approved for treatment of diabetes that recently have also been used off label for weight loss. 1 Studies have found increased risks of gastrointestinal adverse events (biliary disease, 2 pancreatitis, 3 bowel obstruction, 4 and gastroparesis 5 ) in patients with diabetes. 2 - 5 Because such patients have higher baseline risk for gastrointestinal adverse events, risk in patients taking these drugs for other indications may differ. Randomized trials examining efficacy of GLP-1 agonists for weight loss were not designed to capture these events 2 due to small sample sizes and short follow-up. We examined gastrointestinal adverse events associated with GLP-1 agonists used for weight loss in a clinical setting.

We used a random sample of 16 million patients (2006-2020) from the PharMetrics Plus for Academics database (IQVIA), a large health claims database that captures 93% of all outpatient prescriptions and physician diagnoses in the US through the International Classification of Diseases, Ninth Revision (ICD-9) or ICD-10. In our cohort study, we included new users of semaglutide or liraglutide, 2 main GLP-1 agonists, and the active comparator bupropion-naltrexone, a weight loss agent unrelated to GLP-1 agonists. Because semaglutide was marketed for weight loss after the study period (2021), we ensured all GLP-1 agonist and bupropion-naltrexone users had an obesity code in the 90 days prior or up to 30 days after cohort entry, excluding those with a diabetes or antidiabetic drug code.

Patients were observed from first prescription of a study drug to first mutually exclusive incidence (defined as first ICD-9 or ICD-10 code) of biliary disease (including cholecystitis, cholelithiasis, and choledocholithiasis), pancreatitis (including gallstone pancreatitis), bowel obstruction, or gastroparesis (defined as use of a code or a promotility agent). They were followed up to the end of the study period (June 2020) or censored during a switch. Hazard ratios (HRs) from a Cox model were adjusted for age, sex, alcohol use, smoking, hyperlipidemia, abdominal surgery in the previous 30 days, and geographic location, which were identified as common cause variables or risk factors. 6 Two sensitivity analyses were undertaken, one excluding hyperlipidemia (because more semaglutide users had hyperlipidemia) and another including patients without diabetes regardless of having an obesity code. Due to absence of data on body mass index (BMI), the E-value was used to examine how strong unmeasured confounding would need to be to negate observed results, with E-value HRs of at least 2 indicating BMI is unlikely to change study results. Statistical significance was defined as 2-sided 95% CI that did not cross 1. Analyses were performed using SAS version 9.4. Ethics approval was obtained by the University of British Columbia’s clinical research ethics board with a waiver of informed consent.

Our cohort included 4144 liraglutide, 613 semaglutide, and 654 bupropion-naltrexone users. Incidence rates for the 4 outcomes were elevated among GLP-1 agonists compared with bupropion-naltrexone users ( Table 1 ). For example, incidence of biliary disease (per 1000 person-years) was 11.7 for semaglutide, 18.6 for liraglutide, and 12.6 for bupropion-naltrexone and 4.6, 7.9, and 1.0, respectively, for pancreatitis.

Use of GLP-1 agonists compared with bupropion-naltrexone was associated with increased risk of pancreatitis (adjusted HR, 9.09 [95% CI, 1.25-66.00]), bowel obstruction (HR, 4.22 [95% CI, 1.02-17.40]), and gastroparesis (HR, 3.67 [95% CI, 1.15-11.90) but not biliary disease (HR, 1.50 [95% CI, 0.89-2.53]). Exclusion of hyperlipidemia from the analysis did not change the results ( Table 2 ). Inclusion of GLP-1 agonists regardless of history of obesity reduced HRs and narrowed CIs but did not change the significance of the results ( Table 2 ). E-value HRs did not suggest potential confounding by BMI.

This study found that use of GLP-1 agonists for weight loss compared with use of bupropion-naltrexone was associated with increased risk of pancreatitis, gastroparesis, and bowel obstruction but not biliary disease.

Given the wide use of these drugs, these adverse events, although rare, must be considered by patients who are contemplating using the drugs for weight loss because the risk-benefit calculus for this group might differ from that of those who use them for diabetes. Limitations include that although all GLP-1 agonist users had a record for obesity without diabetes, whether GLP-1 agonists were all used for weight loss is uncertain.

Accepted for Publication: September 11, 2023.

Published Online: October 5, 2023. doi:10.1001/jama.2023.19574

Correction: This article was corrected on December 21, 2023, to update the full name of the database used.

Corresponding Author: Mahyar Etminan, PharmD, MSc, Faculty of Medicine, Departments of Ophthalmology and Visual Sciences and Medicine, The Eye Care Center, University of British Columbia, 2550 Willow St, Room 323, Vancouver, BC V5Z 3N9, Canada ( [email protected] ).

Author Contributions: Dr Etminan had full access to all of the data in the study and takes responsibility for the integrity of the data and the accuracy of the data analysis.

Concept and design: Sodhi, Rezaeianzadeh, Etminan.

Acquisition, analysis, or interpretation of data: All authors.

Drafting of the manuscript: Sodhi, Rezaeianzadeh, Etminan.

Critical review of the manuscript for important intellectual content: All authors.

Statistical analysis: Kezouh.

Obtained funding: Etminan.

Administrative, technical, or material support: Sodhi.

Supervision: Etminan.

Conflict of Interest Disclosures: None reported.

Funding/Support: This study was funded by internal research funds from the Department of Ophthalmology and Visual Sciences, University of British Columbia.

Role of the Funder/Sponsor: The funder had no role in the design and conduct of the study; collection, management, analysis, and interpretation of the data; preparation, review, or approval of the manuscript; and decision to submit the manuscript for publication.

Data Sharing Statement: See Supplement .

• Register for email alerts with links to free full-text articles
• Access PDFs of free articles
• Manage your interests
• Save searches and receive search alerts

Life Experiences of Young Minnesotans With Disabilities

Qualitative research report.

22 August 2024

Research Conducted by, MarketResponse International Project #2526 For the Minnesota Governor's Council on Developmental Disabilities

Research Overview

Starting in 2022, MarketResponse International has conducted research studies focused on the intersection of developmental disabilities with race and ethnicity and other marginalized communities, which leads to social discrimination and disparities in areas such as:

• Health Care
• Social Services (home and community-based services)

This qualitative research report is part of the Phase III Intersectionality study, completed in July 2024, which is focused on young Minnesotans (ages 13-22), to better understand their life experiences and the extent to which those with marginalized identities feel included in the One Minnesota promise of diversity, equity and inclusion.

Research Method

Variety of Subject Areas Covered in this Qualitative Report: 1) Experiences in the Community

2) Positive Education Experiences

3) Negative Education Experiences

4) Frustration in Accessing Waivers and Receiving Support Services

5) Hopes, Desires, Dreams, Goals

Qualitative Research Caution Advisory

Caution is advised in interpreting the findings from this research and making inferences to the larger populations of people with disabilities, as it is qualitative in nature and based on opinions of a small number of people with disabilities, including some family members who assisted in completing the survey.

Detailed Findings

• Experiences in the Community

Positive Education Experiences

• Negative Education Experiences
• Frustration in Accessing Waivers and Receiving Support Services

Hopes, Desires, Dreams, Goals

Experiences in the community – a little patience can go a long way in creating positive experiences.

Quote: In my community the experiences have been pleasant. In Gonvick, which is the town next to Clearbrook, I had always volunteered to help at the Gonvick Lions Club rodeo. Every year I had helped, the people in the Lions Club had helped me participate. For example, I had need to step away to cool off when I was getting overwhelmed while handling money or helping explain how to do something a couple times before I remembered it.

For this youth with disabilities, by receiving a little bit of help, he is not only able to be included, but also able to volunteer in his community, which is a benefit to all.

Experiences in the Community – Negative Experience – Compassion Needed

Quote: I have seen people snicker or speak rudely to others like me that are in the middle of a meltdown or just not acting "normal" in public. This makes me sad and wonder why people can't just understand.

For some young Minnesotans with disabilities, occasional meltdowns can happen. Those who can empathize with these moments are saddened when others aren't compassionate and understanding.

A meltdown is an involuntary reaction to nervous system overload.

Source: Meltdowns & Calming Techniques in Autism – Autism Research Institute

Experiences in the Community - Negative Experience - Mental Health in the Workplace

Quote: I nearly lost the job I had for the last semester of school, because when I was having a panic attack they thought it was a seizure and didn't want me to come back. There were even supports in place to help, but they had my mom take me to the doctor so the doctor could write them a note saying that I've never even had a seizure. I was able to go back to work after that. And I'm grateful I don't have seizures because I don't even know what would've had to happen then. It's hard to not always have access to a quiet place, to process if something comes up, and (hard not having) people who could understand.

Misunderstanding mental health symptoms can lead to job insecurity. There is opportunity for workplace awareness and support to ensure fair treatment and proper accommodations for all employees.

Experiences in the Community – Negative Experience – Summer Camp Disaster

Quote: It was a terrible time for our family, and we felt incredibly isolated. We contemplated moving, but ultimately stayed. We have never come across as much ignorance and pure hatred towards those who are different since moving here. We are doing what we can to try to make it a more inclusive community. "They violated the Americans with Disabilities Act, as well as his human rights" When concerns were brought to the community the family was told to move away. Untrue statements were made about how the child's IEP needed to carry over to the summer camp.

Negative Experience – Not Enough Accessible Bathrooms

Access to accessible bathrooms can be a challenge in public buildings. "Is there a good (accessible) restroom?" is a big deciding factor (determining) where we go for events.

Accessibility bathroom issues: Quotes from a mother with a 14 year old daughter who is nonverbal and uses a wheelchair

Long wait times and not enough accessible stalls

Quote: We stand in line like everyone else. But when it is our turn, we also need to wait for the family camping out in the only (accessible) stall, while my daughter is uncomfortably sitting in her soiled garments. Quote: The extended wait times to use the only stall designed for her wheelchair seems to always be in use.

Can lead to not going out at all

Quote: Sometimes I wish we were back at home, so she is able to use the restroom in dignity in a timely manner. But that is not fair for her to not go to events with the family either.

Places that accommodate are remembered

Quote: We also have favorite events we attend because they have "a good (accessible) stall", that can fit her wheelchair, a caregiver, and a sink with soap and paper towels.

Positive Education Experiences – For Minnesota youth with disabilities, positive education experiences are underscored by the critical role of individualized supports in promoting inclusivity and enhancing the educational experiences of students with disabilities. These supports not only facilitate participation in key events, but also foster a sense of belonging and accomplishment, contributing to memorable and positive educational experiences.

• Classroom Inclusion
• Comprehensive Support at Events
• Extracurricular Activities
• Graduations and Milestones

Classroom Inclusion – The inclusion in various classes such as cooking, fashion and design, art, ceramics, and drawing facilitated not only learning but also creativity and peer interactions, contributing significantly to the students' overall positive educational experiences.

Quote: Each of the girls took classes with peers – cooking, fashion and design, art, ceramics, and drawing. The inclusion and being able to create and learn were awesome highlights which made for really good days.

Comprehensive Support at Events – Events like school dances are made accessible and enjoyable through the provision of para support, which included help with ticketing, navigating the venue, ensuring dietary needs are met, and facilitating social interactions. These events can be considered highlights for students when inclusive practices are considered, even in traditional school activities.

Quote: For Prom, we had para support. They met us at the prom venue, helped us navigate through the ticketing process, and then also supported us during the dance to make sure we had breaks when needed. The supports were extremely helpful in making sure we had a great time. The school really did everything necessary to make for a wonderful event.

Extracurricular Activities – In this example, participation in the extracurricular activity of the school band trip to Wisconsin Dells provided a sense of belonging and opportunities for social engagement outside the regular classroom setting.

Quote: I was able to go on the school band trip to Wisconsin Dells. It was a wonderful experience and made me feel like I was part of the group.

Graduation and Milestones – Full inclusion in the graduation ceremony, with appropriate supports, enabled students to participate fully and be recognized alongside their peers, marking significant milestones in their educational journey.

Quote: My kids graduated last year. They were fully included in the graduation ceremony and activities. They had all the appropriate supports to make them comfortable and successful. It was a huge honor to see them walk across the stage and be recognized.

Negative Education Experiences – Young Minnesotans with disabilities encounter various challenges in educational settings. There are many instances where the needs of students were not adequately understood or met, leading to frustration, exclusion, and emotional distress for both the students and their families. The themes that emerged include:

• Lack of Appropriate Accommodations
• Ineffective and Harmful Teaching Methods
• Emotional and Physical Distress
• Need for Understanding, Adaptive Educators

Lack of Appropriate Accommodations – Young Minnesotans with disabilities frequently encounter situations where educators fail to provide the necessary accommodations. This lack of tailored support often left students struggling with tasks that could have been made accessible with minimal adjustments. These unmet needs result in frustration, hindered learning, and feelings of exclusion for both the students and their families. The absence of visual aids, adaptive materials, and other essential supports make the educational experience unnecessarily challenging.

Quote: During our freshman and sophomore years, we had a lead teacher who was not open to adapting things to make them more understandable. We tried for an entire year to get this educator to understand that some students need the visual cues to help them navigate and understand, but she never understood that inherent need. Quote: I know my daughter felt excluded, because something that should be simple, like identifying which classroom was hers by picture rather than by name, became much harder than it needed to be. It was very frustrating and also very eye-opening that not everyone 'gets it.'

Ineffective and Harmful Teaching Methods – Some young Minnesotans with disabilities encounter experiences where educators use teaching methods that are not only ineffective, but also harmful to the student's well-being. In these cases, educational approaches do not align with the student's abilities or needs, leading to distress and a sense of failure.

Repetitive and overly simplistic lessons can cause frustration

Quote: The teacher would hold up a letter in front of her and say 'A' and proceed to do this for some time before moving on to 'B'. My daughter would pound on the tray and scream at the top of her lungs. She was obviously upset with all of this. When were they going to teach something more? I felt like I was failing her, all I could do was leave and cry in the parking lot that day.

Emotional and Physical Distress – Emotional and physical distress for students with disabilities can occur when understanding and proper accommodations are not met, which may reveal a deep impact of feeling misunderstood, excluded, or even physical harm. Feeling of being different or "wrong" because of their disabilities is often compounded by the inappropr≠iate actions of educators, leading to a deep sense of inadequacy and emotional pain.

Physical restraint, used as a method of control, leaves deep emotional scars.

Quote: I had a teacher hold me down during a meltdown that left bruises. It made me feel like there was something wrong with me or that I was a bad kid for not being able to control my emotions at that point in time.

Need for Understanding, Adaptive Educators – There is a critical need for educators to be trained not only in academic aspects but also in understanding the diverse needs of students with disabilities

While many educators are compassionate and professional, a lack of understanding in a few can have a disproportionately negative impact.

Quote: We ran across a few who 'didn't get it,' and that was frustrating and difficult to navigate. The vast majority have been awesome, compassionate, understanding, and extremely professional.

Essential qualities for educators working with students with disabilities include: Adaptive teaching methods; Individualized support; Willingness to learn and adjust

Quote: Adapting work to students' abilities is crucial, yet it was often overlooked.

Frustration in Accessing Waivers and Receiving Support Services – There are significant barriers in the process of receiving support for people with disabilities. Access to waiver funds are a focus of frustration to some families. Solutions include requesting the same reviewer each year to avoid the learning curve, extending the SMRT review cycle, ensuring consistent budget support, and basing reimbursements on support needs rather than types of residential settings.

Barriers to Supports

• Long Waiting Lists for Waiver Services
• Complicated and Dehumanizing Review Processes
• Uncertainty of Budgets
• Inequitable Reimbursement Rates

The initial process of getting on a waiver is lengthy, with long waiting periods.

Quote: First, getting on a waiver takes time. There are waiting lists – there have been times when there were not long lists - but we've waited several years to get on a waiver.

However, once on a waiver, the services seem to be more consistent.

Quote: On the flip side of that, once you're on a waiver, it seems to "stick." At least that has been our experience.

Complicated and Dehumanizing Review Process – The annual SMRT review requires individuals to repeatedly prove their need for services, which is time-consuming and often feels degrading.

Quote: The process to receive supports – especially waiver funds – is difficult, time-consuming and at times dehumanizing. Quote: Every year we have to redo our SMRT review. It feels like we have to prove that we are still disabled, and the services required are still needed. Quote: Going through the same info, year after year, and sometimes it seems we have to convince someone who just met your child (or young adult) who you live with 365x24x7 that they need supports. It is a dehumanizing and degrading process.

It was suggested that a streamlined process, such as extending the review cycle to every 2, 3, or 5 years, would make better sense, compared to current practices.

Uncertainty of Budgets – There is a constant uncertainty regarding the budget allocations for basic services and supports, which causes stress and unpredictability for families.

Quote: There is always uncertainty about budgets. What will the budget be? Will it cover the basic services and supports that are needed?

Frustration in Accessing Waivers and Receiving Support Services - Inequitable Reimbursement Rates

The possibility of differential reimbursements based on living situations, is a frustration to some. It is believed that reimbursements should be based solely on the individual's needs rather than their living arrangements.

Quote: There shouldn't be different reimbursements for various living situations on the waiver. There are discussions going on now that seem to be moving in the direction of providing greater funding to a group home or residential setting than a person's own home (or with family). This is just wrong. Reimbursements should be based on what supports the person needs, independent of where they choose to live.

Education Goals and Desires – Families of students with disabilities have a commitment to nurturing their student's unique abilities, preparing them for a fulfilling future, and ensuring they have opportunities for both personal and social growth. This is achieved through a deep educational foundation and consistent individualized support. Success is measured by:

Personalized Learning and Communication

The importance of a tailored educational experience is evident in how families strive to create an educational environment that aligns with their students' needs and abilities.

Communication is a significant milestone, with achievements centered around enhancing the ability to express oneself.

Preparation for Independent Living and Career Goals

There is a strong emphasis on helping students transition into adulthood by acquiring practical skills and exploring various job opportunities. This preparation extends to those aiming for independence in work, relationships, and daily living.

Aspirations such as obtaining a driver's license, finding fulfilling employment, and pursuing relationships are central to their goals.

Creative and Social Expression

Opportunities for artistic and social engagement, such as acting classes and art lessons, which provide avenues for self-expression and joy are valued.

Education Goals and Desires – Fulfilling education goals and desires can mean pursuing academic interests and steps towards independence.

Quote: I am hoping to learn more about science and history. It will mean a lot to me when I achieve those goals. Quote: I want to get my driver's permit. I want to learn how to drive. My transition program has been helping me study and learn what it will take to get a driver's permit. I got a perfect score on the mock test.

Life Goals and Desires for Young Minnesotans with Disabilities – Goals and desires for young Minnesotans with disabilities have to do with lifestyle, their living situation, and work. The significance of reaching their goals means:

• Leading an independent and fulfilling life
• Maintaining a healthy work-life balance
• Engaging in hobbies and social activities
• Prioritizing physical and mental well-being
• Living Situation
• Living independently, possibly in their own home or apartment
• Residing in an accessible and supportive community
• Having a stable and secure living environment.
• Being employed in a meaningful and rewarding job
• Pursuing career advancement and professional growth
• Having opportunities for entrepreneurship or self-employment
• Working in an inclusive and accommodating workplace

Achieving Goals for Young Minnesotans with Disabilities – For young Minnesotans with disabilities, reaching their goals signifies:

• Personal and financial independence
• A sense of accomplishment and improved quality of life
• The ability to contribute positively to society while being recognized for their abilities.

Quote: In five years, I want to be living on my own in an accessible apartment, working at a job that I love and that values my contributions. Achieving this will make me feel truly independent and fulfilled. Quote: My goal is to have a balanced life where I can engage in hobbies, maintain my health, and work in a supportive environment. Reaching this will give me a sense of accomplishment and allow me to contribute positively to my community.

Achieving Goals for Young Minnesotans with Disabilities – The aspirations of young Minnesotans with disabilities are to achieve independence and fulfillment through education, meaningful work, and personal milestones.

Quote: In five years from now I want to see myself in college and living with some friends. For work I want to continue working at my tech job. When I reach my goals, I will feel very good.

Supportive environments, whether through friends, family, or professionals are important to realize goals and feel valued in their communities.

Quote: I want to continue to live with my family. I would like to have a driver's license so I can help out more with my family. I would like to have a job where I feel valued and respected. It was a dream come true to attend a NASCAR race. Meeting my goals would make me feel like I am worthy. It would be good to have support from family and possibly a PCA to meet my daily needs.

Importance of Supports and Accommodations – Young Minnesotans with disabilities may have varying levels of need for accommodations and support. Some feel confident in their ability to access necessary help, while others recognize the need for specific support services, to achieve greater independence and meet their goals.

Quote: I don't really need any accommodations at the moment, but if I do need them, I know who to ask. Either my parents or staff at college. The process is simply just having a conversation with them about it. Quote: I would benefit from an (individual learning) specialist and a PCA to help me achieve my goals. I want to be independent, but I just need a little help. I would be better supported to meet my goals if I had the help I needed.

Barriers to Achieving Goals for Young Minnesotans with Disabilities – Societal perceptions, can hinder young Minnesotans with disabilities the ability to fully participate and be accepted in the community. They emphasize the importance of being recognized for their unique abilities and valued for who they are, rather than being judged for their differences.

Quote: Some societal barriers that are holding me back is the fact that I have slower processing times than other people, and that hinders me from working with others. Quote: The general public looks at us differently. We are different but that is not a bad thing. We are differently abled. WE have value to the general population. Being accepted for who I am would be the ultimate goal.

Barriers to Achieving Goals for Young Minnesotans with Disabilities – Discrimination and lack of understanding from others are significant barriers to achieving goals, and impact confidence and well-being. Patience, kindness, and education are essential to creating a more supportive and inclusive environment for young people with disabilities.

Quote: A lot of barriers that people with disabilities are faced with when trying to achieve their goals are rude people and discrimination. This has had a toll on my confidence as I was treated very poorly in elementary school. I wish they would be more accepting of kids with disabilities, and to be more educated on how to help them. Quote: I think people just don't understand how I am able to function and that causes a barrier to accomplishing my goals. If people would just be patient and kind and understanding that would help me.

• Benefits of knowing youth with disabilities
• Supporting young Minnesotans with disabilities

SUMMARY – Benefits of knowing youth with disabilities – What the Minnesota Youth Want You to Know About Them

Young Minnesotans with disabilities were asked:

Thinking about other people in your community who may see you around from time to time, but don't know you personally,

• What would you want them to know about you?
• How would it benefit you if they knew you better?
• How would it benefit them if they knew you better?

Youth with disabilities often face significant challenges when stepping outside their comfort zones and participating in public life, frequently feeling judged by others. Recognizing their strengths and including them fully in the community can help break down barriers and foster a more supportive and understanding environment.

Quote: I am a caring, interesting, loving, awesome individual that just wants to be included. You might see a different side of the puzzle if you could just live a day in my shoes. They would see how hard it is for me to leave my home and be in the public. I go outside my comfort zone just to leave the house. It's just hard. My mom says I don't see the looks I get sometimes, and I really don't care and neither does she. But she notices all the same.

What the Minnesota Youth Want You to Know About Them – Young Minnesotans with disabilities desire to be understood beyond appearances, as pity and fear from others lead to avoidance rather than connection. They believe that recognizing shared similarities could foster meaningful relationships, which will create an environment where they feel truly included and valued in the community.

Quote: Sometimes there are "looks" of pity, sadness, nervousness, or fear that lead to avoidance. I want them to know that they don't need to pity or be afraid of me. It would help them be better able to make a connection and understand we are more alike than different, and they could gain a friend or at least have a meaningful conversation or a good laugh. That would help me to be more of an actual part of the community, more valued, more included; not just tolerated or accepted, but actually included, engaged, and appreciated.

When youth with disabilities are included, and the community knows more about them, everyone benefits.

Acceptance Without Pity

What Should the Community know about me? There is no need to pity or fear me.

How I would benefit I would feel more included and valued in the community.

How the community would benefit They could make a connection, understand our similarities, gain a friend, or have meaningful conversations.

Communication Abilities

What Should the Community know about me? Despite expressive communication deficits, I can communicate using an augmentative and alternative communication device.

How I would benefit I would be treated with dignity and spoken to directly.

How the community would benefit They would get the chance to know me.

Understanding Nonverbal Communication

What Should the Community know about me? My daughter, though nonverbal, understands everything and has feelings, wants, and interests.

How I would benefit My daughter would feel valued, accepted, and have dignity.

How the community would benefit They would see her sense of humor and learn what a true friend is.

Uniqueness of Individuals

What Should the Community know about me? Each person is a unique individual with their own goals, dreams, fears, talents, and opinions.

How I would benefit Understanding and appreciation of our uniqueness and individuality.

How the community would benefit They would be enriched by understanding perspectives they hadn't considered before.

Caring and Inclusion

How the community would benefit I am a caring, interesting, loving individual who wants to be included.

How I would benefit More understanding of the challenges I face and better inclusion.

How the community would benefit They would see different perspectives and understand the effort it takes for me to be in public.

Fun and caring personalities

How the community would benefit I am a very fun person and very caring.

How I would benefit It would enable me to talk to more people.

How the community would benefit They would have a caring person to talk to.

SUMMARY – How Can We Support Young Minnesotans with Disabilities?

By focusing on improving these areas, Minnesota can be a place where young people with disabilities can work towards achieving their aspirations and leading fulfilling lives, rather than having to fight for their basic rights.

• Accessibility
• Accessible housing and transportation
• Workplaces equipped with necessary accommodations
• Universal design in public spaces and services
• Assistive Technologies
• Access to modern and effective assistive devices
• Regular updates and maintenance for assistive technologies
• Training and support in using these technologies
• Education and Training
• Inclusive and supportive educational institutions
• Vocational training and skill development programs
• Continuous learning opportunities to stay updated in their field
• Health and Wellness
• Comprehensive healthcare services, including mental health support
• Programs promoting physical fitness and well-being
• Assistance with managing chronic conditions and disabilities
• Social Support
• Strong support networks, including family, friends, and community groups
• Peer support and mentorship programs
• Access to social services and advocacy organizations.

Needed Supports and Accommodations – In Their Own Words

Quote: The single biggest help that the government/community can provide is funding to support living with a disability. This includes - living support for daily tasks - (PCA or care assistance), transportation, job search assistance, housing assistance. Each of these is a unique barrier if they are not available and accessible. Quote: We also live in the metro - where there is access to many services and organizations. Not everyone in MN lives close enough to access these services, so being able to bring services statewide is a significant issue and needs to be addressed

Letters to the Governor – Respondents were asked to write Governor Tim Walz and Lieutenant Governor Peggy Flanagan, and other State leaders a letter regarding what life is like today, and how it can be enhanced, for a better future for young people with disabilities in Minnesota.

The letter below shows a positive perception for supports for people with disabilities in Minnesota, compared to other states.

Quote: We are grateful for the services that are available to us as Minnesotans. Traveling to other states and listening to other forums, it is apparent we are ahead of the country when it comes to supports for our people with disabilities in our communities. Quote: We cannot go backwards, please do not limit/cut these programs that our youth need to move forward, live a full life and move towards living independently with these supports. Please help us keep PCAs, nursing and respite services, by reimbursing at a rate that retains these quality caregivers.

Continue to move forward, maintain an inclusive stance, and focus on what is possible. These are the main themes of this letter.

Quote: First, I would like to thank Governor Walz and Lt Governor Flanagan for their work and support of individuals with disabilities. The 2023 legislative session included a number of bills (passed) that were helpful to people living with a disability, such as increased wages for PCAs, allowing students to attend transition until their 22nd birthday and many others. Quote: The challenge for all of us is to keep moving forward and not go backwards. Standing still is the same as moving backwards. We have to agree that disability rights are human rights – and the ability to make choices, live the type of life we choose and have the appropriate supports in place to allow us to do this is a basic human right. Quote: Also, we need to maintain our inclusive stance - decisions need to be made with the community in mind. We work on person centered planning – the idea that the individual has the best information to make informed choices about health, money, living, education, transportation, work and community. Let's never forget that simple idea; never forget the humanity behind every decision and the people who are impacted and affected by the decisions we made. Quote: Lastly – let's continue to make MN a place where all are warmly welcomed. We need to focus on what is possible - vs. what has been done before. One of the organizations that we work with has a statement in their mission which says, "Taking a position of possible". To those (and their families) – with a developmental disability – so much of our world has been centered and grounded by negative statements like, "they can't do that, or that might be too much." I love the concept of taking a position of possible. We all will be surprised at what can be achieved when we look at things through the lens of possibility! Quote: Minnesota is a great state and a great place to live. We have natural beauty to enjoy, a rich history, people who care and a community that has been created to encourage and enrich. Let's continue to make sure it is accessible, available and all can enjoy.

Thank you! from your MarketResponse team

DEREK PEARSON, Sr. Research Consultant [email protected] LYNN SCHREIFELS, Sr. Research Manager [email protected] TOM PEARSON, Managing Director [email protected] SUSAN McCULLOUGH, Sr. Research Director [email protected]

Samantha Putterman, PolitiFact Samantha Putterman, PolitiFact

Leave your feedback

• Copy URL https://www.pbs.org/newshour/politics/fact-checking-warnings-from-democrats-about-project-2025-and-donald-trump

Fact-checking warnings from Democrats about Project 2025 and Donald Trump

This fact check originally appeared on PolitiFact .

Project 2025 has a starring role in this week’s Democratic National Convention.

And it was front and center on Night 1.

WATCH: Hauling large copy of Project 2025, Michigan state Sen. McMorrow speaks at 2024 DNC

“This is Project 2025,” Michigan state Sen. Mallory McMorrow, D-Royal Oak, said as she laid a hardbound copy of the 900-page document on the lectern. “Over the next four nights, you are going to hear a lot about what is in this 900-page document. Why? Because this is the Republican blueprint for a second Trump term.”

Vice President Kamala Harris, the Democratic presidential nominee, has warned Americans about “Trump’s Project 2025” agenda — even though former President Donald Trump doesn’t claim the conservative presidential transition document.

“Donald Trump wants to take our country backward,” Harris said July 23 in Milwaukee. “He and his extreme Project 2025 agenda will weaken the middle class. Like, we know we got to take this seriously, and can you believe they put that thing in writing?”

Minnesota Gov. Tim Walz, Harris’ running mate, has joined in on the talking point.

“Don’t believe (Trump) when he’s playing dumb about this Project 2025. He knows exactly what it’ll do,” Walz said Aug. 9 in Glendale, Arizona.

Trump’s campaign has worked to build distance from the project, which the Heritage Foundation, a conservative think tank, led with contributions from dozens of conservative groups.

Much of the plan calls for extensive executive-branch overhauls and draws on both long-standing conservative principles, such as tax cuts, and more recent culture war issues. It lays out recommendations for disbanding the Commerce and Education departments, eliminating certain climate protections and consolidating more power to the president.

Project 2025 offers a sweeping vision for a Republican-led executive branch, and some of its policies mirror Trump’s 2024 agenda, But Harris and her presidential campaign have at times gone too far in describing what the project calls for and how closely the plans overlap with Trump’s campaign.

PolitiFact researched Harris’ warnings about how the plan would affect reproductive rights, federal entitlement programs and education, just as we did for President Joe Biden’s Project 2025 rhetoric. Here’s what the project does and doesn’t call for, and how it squares with Trump’s positions.

Are Trump and Project 2025 connected?

To distance himself from Project 2025 amid the Democratic attacks, Trump wrote on Truth Social that he “knows nothing” about it and has “no idea” who is in charge of it. (CNN identified at least 140 former advisers from the Trump administration who have been involved.)

The Heritage Foundation sought contributions from more than 100 conservative organizations for its policy vision for the next Republican presidency, which was published in 2023.

Project 2025 is now winding down some of its policy operations, and director Paul Dans, a former Trump administration official, is stepping down, The Washington Post reported July 30. Trump campaign managers Susie Wiles and Chris LaCivita denounced the document.

WATCH: A look at the Project 2025 plan to reshape government and Trump’s links to its authors

However, Project 2025 contributors include a number of high-ranking officials from Trump’s first administration, including former White House adviser Peter Navarro and former Housing and Urban Development Secretary Ben Carson.

A recently released recording of Russell Vought, a Project 2025 author and the former director of Trump’s Office of Management and Budget, showed Vought saying Trump’s “very supportive of what we do.” He said Trump was only distancing himself because Democrats were making a bogeyman out of the document.

Project 2025 wouldn’t ban abortion outright, but would curtail access

The Harris campaign shared a graphic on X that claimed “Trump’s Project 2025 plan for workers” would “go after birth control and ban abortion nationwide.”

The plan doesn’t call to ban abortion nationwide, though its recommendations could curtail some contraceptives and limit abortion access.

What’s known about Trump’s abortion agenda neither lines up with Harris’ description nor Project 2025’s wish list.

Project 2025 says the Department of Health and Human Services Department should “return to being known as the Department of Life by explicitly rejecting the notion that abortion is health care.”

It recommends that the Food and Drug Administration reverse its 2000 approval of mifepristone, the first pill taken in a two-drug regimen for a medication abortion. Medication is the most common form of abortion in the U.S. — accounting for around 63 percent in 2023.

If mifepristone were to remain approved, Project 2025 recommends new rules, such as cutting its use from 10 weeks into pregnancy to seven. It would have to be provided to patients in person — part of the group’s efforts to limit access to the drug by mail. In June, the U.S. Supreme Court rejected a legal challenge to mifepristone’s FDA approval over procedural grounds.

WATCH: Trump’s plans for health care and reproductive rights if he returns to White House The manual also calls for the Justice Department to enforce the 1873 Comstock Act on mifepristone, which bans the mailing of “obscene” materials. Abortion access supporters fear that a strict interpretation of the law could go further to ban mailing the materials used in procedural abortions, such as surgical instruments and equipment.

The plan proposes withholding federal money from states that don’t report to the Centers for Disease Control and Prevention how many abortions take place within their borders. The plan also would prohibit abortion providers, such as Planned Parenthood, from receiving Medicaid funds. It also calls for the Department of Health and Human Services to ensure that the training of medical professionals, including doctors and nurses, omits abortion training.

The document says some forms of emergency contraception — particularly Ella, a pill that can be taken within five days of unprotected sex to prevent pregnancy — should be excluded from no-cost coverage. The Affordable Care Act requires most private health insurers to cover recommended preventive services, which involves a range of birth control methods, including emergency contraception.

Trump has recently said states should decide abortion regulations and that he wouldn’t block access to contraceptives. Trump said during his June 27 debate with Biden that he wouldn’t ban mifepristone after the Supreme Court “approved” it. But the court rejected the lawsuit based on standing, not the case’s merits. He has not weighed in on the Comstock Act or said whether he supports it being used to block abortion medication, or other kinds of abortions.

Project 2025 doesn’t call for cutting Social Security, but proposes some changes to Medicare

“When you read (Project 2025),” Harris told a crowd July 23 in Wisconsin, “you will see, Donald Trump intends to cut Social Security and Medicare.”

The Project 2025 document does not call for Social Security cuts. None of its 10 references to Social Security addresses plans for cutting the program.

Harris also misleads about Trump’s Social Security views.

In his earlier campaigns and before he was a politician, Trump said about a half-dozen times that he’s open to major overhauls of Social Security, including cuts and privatization. More recently, in a March 2024 CNBC interview, Trump said of entitlement programs such as Social Security, “There’s a lot you can do in terms of entitlements, in terms of cutting.” However, he quickly walked that statement back, and his CNBC comment stands at odds with essentially everything else Trump has said during the 2024 presidential campaign.

Trump’s campaign website says that not “a single penny” should be cut from Social Security. We rated Harris’ claim that Trump intends to cut Social Security Mostly False.

Project 2025 does propose changes to Medicare, including making Medicare Advantage, the private insurance offering in Medicare, the “default” enrollment option. Unlike Original Medicare, Medicare Advantage plans have provider networks and can also require prior authorization, meaning that the plan can approve or deny certain services. Original Medicare plans don’t have prior authorization requirements.

The manual also calls for repealing health policies enacted under Biden, such as the Inflation Reduction Act. The law enabled Medicare to negotiate with drugmakers for the first time in history, and recently resulted in an agreement with drug companies to lower the prices of 10 expensive prescriptions for Medicare enrollees.

Trump, however, has said repeatedly during the 2024 presidential campaign that he will not cut Medicare.

Project 2025 would eliminate the Education Department, which Trump supports

The Harris campaign said Project 2025 would “eliminate the U.S. Department of Education” — and that’s accurate. Project 2025 says federal education policy “should be limited and, ultimately, the federal Department of Education should be eliminated.” The plan scales back the federal government’s role in education policy and devolves the functions that remain to other agencies.

Aside from eliminating the department, the project also proposes scrapping the Biden administration’s Title IX revision, which prohibits discrimination based on sexual orientation and gender identity. It also would let states opt out of federal education programs and calls for passing a federal parents’ bill of rights similar to ones passed in some Republican-led state legislatures.

Republicans, including Trump, have pledged to close the department, which gained its status in 1979 within Democratic President Jimmy Carter’s presidential Cabinet.

In one of his Agenda 47 policy videos, Trump promised to close the department and “to send all education work and needs back to the states.” Eliminating the department would have to go through Congress.

What Project 2025, Trump would do on overtime pay

In the graphic, the Harris campaign says Project 2025 allows “employers to stop paying workers for overtime work.”

The plan doesn’t call for banning overtime wages. It recommends changes to some Occupational Safety and Health Administration, or OSHA, regulations and to overtime rules. Some changes, if enacted, could result in some people losing overtime protections, experts told us.

The document proposes that the Labor Department maintain an overtime threshold “that does not punish businesses in lower-cost regions (e.g., the southeast United States).” This threshold is the amount of money executive, administrative or professional employees need to make for an employer to exempt them from overtime pay under the Fair Labor Standards Act.

In 2019, the Trump’s administration finalized a rule that expanded overtime pay eligibility to most salaried workers earning less than about $35,568, which it said made about 1.3 million more workers eligible for overtime pay. The Trump-era threshold is high enough to cover most line workers in lower-cost regions, Project 2025 said.

The Biden administration raised that threshold to $43,888 beginning July 1, and that will rise to $58,656 on Jan. 1, 2025. That would grant overtime eligibility to about 4 million workers, the Labor Department said.

It’s unclear how many workers Project 2025’s proposal to return to the Trump-era overtime threshold in some parts of the country would affect, but experts said some would presumably lose the right to overtime wages.

Other overtime proposals in Project 2025’s plan include allowing some workers to choose to accumulate paid time off instead of overtime pay, or to work more hours in one week and fewer in the next, rather than receive overtime.

Trump’s past with overtime pay is complicated. In 2016, the Obama administration said it would raise the overtime to salaried workers earning less than $47,476 a year, about double the exemption level set in 2004 of $23,660 a year.

But when a judge blocked the Obama rule, the Trump administration didn’t challenge the court ruling. Instead it set its own overtime threshold, which raised the amount, but by less than Obama.

Support Provided By: Learn more

Educate your inbox

Subscribe to Here’s the Deal, our politics newsletter for analysis you won’t find anywhere else.

Thank you. Please check your inbox to confirm.