a controlled experiment is how many variables

• Skip to secondary menu
• Skip to main content
• Skip to primary sidebar

Statistics By Jim

Making statistics intuitive

Control Variables: Definition, Uses & Examples

By Jim Frost 4 Comments

What is a Control Variable?

Control variables, also known as controlled variables, are properties that researchers hold constant for all observations in an experiment. While these variables are not the primary focus of the research, keeping their values consistent helps the study establish the true relationships between the independent and dependent variables. The capacity to control variables directly is highest in experiments that researchers conduct under lab conditions. In observational studies, researchers can’t directly control the variables. Instead, they record the values of control variables and then use statistical procedures to account for them.

In science, researchers assess the effects that the independent variables have on the dependent variable. However, other variables can also affect the outcome. If the scientists do not control these other variables, they can distort the primary results of interest. In other words, left uncontrolled, those other factors become confounders that can bias the findings. The uncontrolled variables may be responsible for the changes in the outcomes rather than your treatment or experimental variables. Consequently, researchers control the values of these other variables.

Suppose you are performing an experiment involving different types of fertilizers and plant growth. Those are your primary variables of interest. However, you also know that soil moisture, sunlight, and temperature affect plant growth. If you don’t hold these variables constant for all observations, they might explain the plant growth differences you observe. Consequently, moisture, sunlight, and temperature are essential control variables for your study.

If you perform the study in a controlled lab setting, you can control these environmental conditions and keep their values constant for all observations in your experiment. That way, if you do see plant growth differences, you can be more confident that the fertilizers caused them.

When researchers use control variables, they should identify them, record their values, and include the details in their write-up. This process helps other researchers understand and replicate the results.

Related posts : Independent and Dependent Variables and Confounding Variables

Control Variables and Internal Validity

By controlling variables, you increase the internal validity of your research. Internal validity is the degree of confidence that a causal relationship exists between the treatment and the difference in outcomes. In other words, how likely is it that your treatment caused the differences you observe? Are the researcher’s conclusions correct? Or, can changes in the outcome be attributed to other causes?

If the relevant variables are not controlled, you might need to attribute the changes to confounders rather than the treatment. Control variables reduce the impact of confounding variables.

Controlled Variable Examples

How to Control Variables in Science

Scientists can control variables using several methods. In some cases, variables can be controlled directly. For example, researchers can control the growing conditions for the fertilizer experiment. Or use standardized procedures and processes for all subjects to reduce other sources of variation. These efforts attempt to eliminate all differences between the treatment and control groups other than the treatments themselves.

However, sometimes that’s not possible. Fortunately, there are other approaches.

Random assignment

In some experiments, there can be too many variables to control. Additionally, the researchers might not even know all the potential confounding variables. In these cases, they can randomly assign subjects to the experimental groups. This process controls variables by averaging out all traits across the experimental groups, making them roughly equivalent when the experiment begins. The randomness helps prevent any systematic differences between the experimental groups. Learn more in my post about Random Assignment in Experiments .

Statistical control

Directly controlled variables and random assignment are methods that equalize the experimental groups. However, they aren’t always feasible. In some cases, there are too many variables to control. In other situations, random assignment might not be possible. Try randomly assigning people to smoking and non-smoking groups!

Fortunately, statistical techniques, such as multiple regression analysis , don’t balance the groups but instead use a model that statistically controls the variables. The model accounts for confounding variables.

In multiple regression analysis, including a variable in the model holds it constant while the treatment variable fluctuates. This process allows you to isolate the role of the treatment while accounting for confounders. You can also use ANOVA and ANCOVA.

For more information, read my posts, When to Use Regression and ANOVA Overview .

Share this:

Reader Interactions

July 13, 2024 at 2:19 am

Sir you are doing a good job. much appreciated. Could you please tell us how to read the values of control variables like ranges and what do they mean. For instance how to read this (F=1.83; p= 0.07). Thank YOU

February 28, 2024 at 2:09 pm

In your explanation of control variables you use the example of a research study of plant fertilizers and their growth, wanting to control for moisture, sunshine and temperature. You state “Consequently, moisture, sunlight, and temperature are essential control variables for your study. These variables can be controlled by keeping their values constant for all observations in your experiment. You do not go further as to how you control for these values, particularly when such variables are continually changing. Al Wassler

February 28, 2024 at 2:13 pm

Presumably, this experiment would occur in a lab setting where you can control these variables. Plants would be raised with the same humidity, soil moisture, and light conditions.

I’ll add some text to the article to clarify that. Thanks!

January 26, 2023 at 7:00 pm

I have a question please about when a control variable is also itself part of the dependent variable. I see this referred to in the medical research literature as ‘mathematical coupling’, where – for example – the beats per minute (BPM) is the dependent variable and researchers want to put minutes also as a control variable. This seems to create a problem because ‘minutes’ appears on both sides of the equation, and the medical literature talks about spurious correlation, and the model needing to be redesigned. But do you have a simple text or reference – ideally just plain statistics/OLS rather than linked to medical research – where this could be explained in theory terms ? What goes wrong in the regression when a variable is both a control variable and part of the dependent variable (perhaps as part of a ratio or measurement of change)? I just haven’t found a textbook reference that says definitively ‘you can’t have the same variable in both sides of the regression simultaneously’, so I’m not sure whether this violates OLS and so is something to avoid entirely (with a new model design or different research question) or to live with.

Any help would be great, thank you for your work,

Comments and Questions Cancel reply

• COVID-19 Tracker
• Biochemistry
• Anatomy & Physiology
• Microbiology
• Neuroscience
• Animal Kingdom
• NGSS High School
• Latest News
• Editors’ Picks
• Weekly Digest
• Quotes about Biology

Controlled Experiment

Reviewed by: BD Editors

Controlled Experiment Definition

A controlled experiment is a scientific test that is directly manipulated by a scientist, in order to test a single variable at a time. The variable being tested is the independent variable , and is adjusted to see the effects on the system being studied. The controlled variables are held constant to minimize or stabilize their effects on the subject. In biology, a controlled experiment often includes restricting the environment of the organism being studied. This is necessary to minimize the random effects of the environment and the many variables that exist in the wild.

In a controlled experiment, the study population is often divided into two groups. One group receives a change in a certain variable, while the other group receives a standard environment and conditions. This group is referred to as the control group , and allows for comparison with the other group, known as the experimental group . Many types of controls exist in various experiments, which are designed to ensure that the experiment worked, and to have a basis for comparison. In science, results are only accepted if it can be shown that they are statistically significant . Statisticians can use the difference between the control group and experimental group and the expected difference to determine if the experiment supports the hypothesis , or if the data was simply created by chance.

Examples of Controlled Experiment

Music preference in dogs.

Do dogs have a taste in music? You might have considered this, and science has too. Believe it or not, researchers have actually tested dog’s reactions to various music genres. To set up a controlled experiment like this, scientists had to consider the many variables that affect each dog during testing. The environment the dog is in when listening to music, the volume of the music, the presence of humans, and even the temperature were all variables that the researches had to consider.

In this case, the genre of the music was the independent variable. In other words, to see if dog’s change their behavior in response to different kinds of music, a controlled experiment had to limit the interaction of the other variables on the dogs. Usually, an experiment like this is carried out in the same location, with the same lighting, furniture, and conditions every time. This ensures that the dogs are not changing their behavior in response to the room. To make sure the dogs don’t react to humans or simply the noise of the music, no one else can be in the room and the music must be played at the same volume for each genre. Scientist will develop protocols for their experiment, which will ensure that many other variables are controlled.

This experiment could also split the dogs into two groups, only testing music on one group. The control group would be used to set a baseline behavior, and see how dogs behaved without music. The other group could then be observed and the differences in the group’s behavior could be analyzed. By rating behaviors on a quantitative scale, statistics can be used to analyze the difference in behavior, and see if it was large enough to be considered significant. This basic experiment was carried out on a large number of dogs, analyzing their behavior with a variety of different music genres. It was found that dogs do show more relaxed and calm behaviors when a specific type of music plays. Come to find out, dogs enjoy reggae the most.

Scurvy in Sailors

In the early 1700s, the world was a rapidly expanding place. Ships were being built and sent all over the world, carrying thousands and thousands of sailors. These sailors were mostly fed the cheapest diets possible, not only because it decreased the costs of goods, but also because fresh food is very hard to keep at sea. Today, we understand that lack of essential vitamins and nutrients can lead to severe deficiencies that manifest as disease. One of these diseases is scurvy.

Scurvy is caused by a simple vitamin C deficiency, but the effects can be brutal. Although early symptoms just include general feeling of weakness, the continued lack of vitamin C will lead to a breakdown of the blood cells and vessels that carry the blood. This results in blood leaking from the vessels. Eventually, people bleed to death internally and die. Before controlled experiments were commonplace, a simple physician decided to tackle the problem of scurvy. James Lind, of the Royal Navy, came up with a simple controlled experiment to find the best cure for scurvy.

He separated sailors with scurvy into various groups. He subjected them to the same controlled condition and gave them the same diet, except one item. Each group was subjected to a different treatment or remedy, taken with their food. Some of these remedies included barley water, cider and a regiment of oranges and lemons. This created the first clinical trial , or test of the effectiveness of certain treatments in a controlled experiment. Lind found that the oranges and lemons helped the sailors recover fast, and within a few years the Royal Navy had developed protocols for growing small leafy greens that contained high amounts of vitamin C to feed their sailors.

Related Biology Terms

• Field Experiment – An experiment conducted in nature, outside the bounds of total control.
• Independent Variable – The thing in an experiment being changed or manipulated by the experimenter to see effects on the subject.
• Controlled Variable – A thing that is normalized or standardized across an experiment, to remove it from having an effect on the subject being studied.
• Control Group – A group of subjects in an experiment that receive no independent variable, or a normalized amount, to provide comparison.

Cite This Article

Subscribe to our newsletter, privacy policy, terms of service, scholarship, latest posts, white blood cell, t cell immunity, satellite cells, embryonic stem cells, popular topics, photosynthesis, animal cell, endocrine system, acetic acid, scientific method.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• Guide to Experimental Design | Overview, Steps, & Examples

Guide to Experimental Design | Overview, 5 steps & Examples

Published on December 3, 2019 by Rebecca Bevans . Revised on June 21, 2023.

Experiments are used to study causal relationships . You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design create a set of procedures to systematically test a hypothesis . A good experimental design requires a strong understanding of the system you are studying.

There are five key steps in designing an experiment:

• Consider your variables and how they are related
• Write a specific, testable hypothesis
• Design experimental treatments to manipulate your independent variable
• Assign subjects to groups, either between-subjects or within-subjects
• Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any  extraneous variables that might influence your results. If random assignment of participants to control and treatment groups is impossible, unethical, or highly difficult, consider an observational study instead. This minimizes several types of research bias, particularly sampling bias , survivorship bias , and attrition bias as time passes.

Table of contents

Step 1: define your variables, step 2: write your hypothesis, step 3: design your experimental treatments, step 4: assign your subjects to treatment groups, step 5: measure your dependent variable, other interesting articles, frequently asked questions about experiments.

You should begin with a specific research question . We will work with two research question examples, one from health sciences and one from ecology:

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables .

Then you need to think about possible extraneous and confounding variables and consider how you might control  them in your experiment.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Prevent plagiarism. Run a free check.

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

The next steps will describe how to design a controlled experiment . In a controlled experiment, you must be able to:

• Systematically and precisely manipulate the independent variable(s).
• Precisely measure the dependent variable(s).
• Control any potential confounding variables.

If your study system doesn’t match these criteria, there are other types of research you can use to answer your research question.

How you manipulate the independent variable can affect the experiment’s external validity – that is, the extent to which the results can be generalized and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

• just slightly above the natural range for your study region.
• over a wider range of temperatures to mimic future warming.
• over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

• a categorical variable : either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
• a continuous variable (minutes of phone use measured every night).

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size : how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment’s statistical power , which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups . Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group , which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

• A completely randomized design vs a randomized block design .
• A between-subjects design vs a within-subjects design .

Randomization

An experiment can be completely randomized or randomized within blocks (aka strata):

• In a completely randomized design , every subject is assigned to a treatment group at random.
• In a randomized block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.

Sometimes randomization isn’t practical or ethical , so researchers create partially-random or even non-random designs. An experimental design where treatments aren’t randomly assigned is called a quasi-experimental design .

Between-subjects vs. within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomizing or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn’t influence the results of the experiment.

Finally, you need to decide how you’ll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimize research bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalized to turn them into measurable observations.

• Ask participants to record what time they go to sleep and get up each day.
• Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Student’s  t -distribution
• Normal distribution
• Null and Alternative Hypotheses
• Chi square tests
• Confidence interval
• Cluster sampling
• Stratified sampling
• Data cleansing
• Reproducibility vs Replicability
• Peer review
• Likert scale

Research bias

• Implicit bias
• Framing effect
• Cognitive bias
• Placebo effect
• Hawthorne effect
• Hindsight bias
• Affect heuristic

Experimental design means planning a set of procedures to investigate a relationship between variables . To design a controlled experiment, you need:

• A testable hypothesis
• At least one independent variable that can be precisely manipulated
• At least one dependent variable that can be precisely measured

When designing the experiment, you decide:

• How you will manipulate the variable(s)
• How you will control for any potential confounding variables
• How many subjects or samples will be included in the study
• How subjects will be assigned to treatment levels

Experimental design is essential to the internal and external validity of your experiment.

The key difference between observational studies and experimental designs is that a well-done observational study does not influence the responses of participants, while experiments do have some sort of treatment condition applied to at least some participants by random assignment .

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word “between” means that you’re comparing different conditions between groups, while the word “within” means you’re comparing different conditions within the same group.

An experimental group, also known as a treatment group, receives the treatment whose effect researchers wish to study, whereas a control group does not. They should be identical in all other ways.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Bevans, R. (2023, June 21). Guide to Experimental Design | Overview, 5 steps & Examples. Scribbr. Retrieved September 3, 2024, from https://www.scribbr.com/methodology/experimental-design/

Is this article helpful?

Rebecca Bevans

Other students also liked, random assignment in experiments | introduction & examples, quasi-experimental design | definition, types & examples, how to write a lab report, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Microbe Notes

Controlled Experiments: Definition, Steps, Results, Uses

Controlled experiments ensure valid and reliable results by minimizing biases and controlling variables effectively.

Rigorous planning, ethical considerations, and precise data analysis are vital for successful experiment execution and meaningful conclusions.

Real-world applications demonstrate the practical impact of controlled experiments, guiding informed decision-making in diverse domains.

Controlled experiments are the systematic research method where variables are intentionally manipulated and controlled to observe the effects of a particular phenomenon. It aims to isolate and measure the impact of specific variables, ensuring a more accurate causality assessment.

Table of Contents

Interesting Science Videos

Importance of controlled experiments in various fields

Controlled experiments are significant across diverse fields, including science, psychology, economics, healthcare, and technology.

They provide a systematic approach to test hypotheses, establish cause-and-effect relationships, and validate the effectiveness of interventions or solutions.

Why Controlled Experiments Matter? 

Validity and reliability of results.

Controlled experiments uphold the gold standard for scientific validity and reliability. By meticulously controlling variables and conditions, researchers can attribute observed outcomes accurately to the independent variable being tested. This precision ensures that the findings can be replicated and are trustworthy.

Minimizing Biases and Confounding Variables

One of the core benefits of controlled experiments lies in their ability to minimize biases and confounding variables. Extraneous factors that could distort results are mitigated through careful control and randomization. This enables researchers to isolate the effects of the independent variable, leading to a more accurate understanding of causality.

Achieving Causal Inference

Controlled experiments provide a strong foundation for establishing causal relationships between variables. Researchers can confidently infer causation by manipulating specific variables and observing resulting changes. The capability informs decision-making, policy formulation, and advancements across various fields.

Planning a Controlled Experiment

Formulating research questions and hypotheses.

Formulating clear research questions and hypotheses is paramount at the outset of a controlled experiment. These inquiries guide the direction of the study, defining the variables of interest and setting the stage for structured experimentation.

Well-defined questions and hypotheses contribute to focused research and facilitate meaningful data collection.

Identifying Variables and Control Groups

Identifying and defining independent, dependent, and control variables is fundamental to experimental planning. 

Precise identification ensures that the experiment is designed to isolate the effect of the independent variable while controlling for other influential factors. Establishing control groups allows for meaningful comparisons and robust analysis of the experimental outcomes.

Designing Experimental Procedures and Protocols

Careful design of experimental procedures and protocols is essential for a successful controlled experiment. The step involves outlining the methodology, data collection techniques, and the sequence of activities in the experiment. 

A well-designed experiment is structured to maintain consistency, control, and accuracy throughout the study, thereby enhancing the validity and credibility of the results.

Conducting a Controlled Experiment

Randomization and participant selection.

Randomization is a critical step in ensuring the fairness and validity of a controlled experiment. It involves assigning participants to different experimental conditions in a random and unbiased manner. 

The selection of participants should accurately represent the target population, enhancing the results’ generalizability.

Data Collection Methods and Instruments

Selecting appropriate data collection methods and instruments is pivotal in gathering accurate and relevant data. Researchers often employ surveys, observations, interviews, or specialized tools to record and measure the variables of interest. 

The chosen methods should align with the experiment’s objectives and provide reliable data for analysis.

Monitoring and Maintaining Experimental Conditions

Maintaining consistent and controlled experimental conditions throughout the study is essential. Regular monitoring helps ensure that variables remain constant and uncontaminated, reducing the risk of confounding factors. 

Rigorous monitoring protocols and timely adjustments are crucial for the accuracy and reliability of the experiment.

Analysing Results and Drawing Conclusions

Data analysis techniques.

Data analysis involves employing appropriate statistical and analytical techniques to process the collected data. This step helps derive meaningful insights, identify patterns, and draw valid conclusions. 

Common techniques include regression analysis, t-tests , ANOVA , and more, tailored to the research design and data type .

Interpretation of Results

Interpreting the results entails understanding the statistical outcomes and their implications for the research objectives. 

Researchers analyze patterns, trends, and relationships revealed by the data analysis to infer the experiment’s impact on the variables under study. Clear and accurate interpretation is crucial for deriving actionable insights.

Implications and Potential Applications

Identifying the broader implications and potential applications of the experiment’s results is fundamental. Researchers consider how the findings can inform decision-making, policy development, or further research. 

Understanding the practical implications helps bridge the gap between theoretical insights and real-world application.

Common Challenges and Solutions

Addressing ethical considerations.

Ethical challenges in controlled experiments include ensuring informed consent, protecting participants’ privacy, and minimizing harm. 

Solutions involve thorough ethics reviews, transparent communication with participants, and implementing safeguards to uphold ethical standards throughout the experiment.

Dealing with Sample Size and Statistical Power

The sample size is crucial for achieving statistically significant results. Adequate sample sizes enhance the experiment’s power to detect meaningful effects accurately. 

Statistical power analysis guides researchers in determining the optimal sample size for the experiment, minimizing the risk of type I and II errors .

Mitigating Unforeseen Variables

Unforeseen variables can introduce bias and affect the experiment’s validity. Researchers employ meticulous planning and robust control measures to minimize the impact of unforeseen variables. 

Pre-testing and pilot studies help identify potential confounders, allowing researchers to adapt the experiment accordingly.

A controlled experiment involves meticulous planning, precise execution, and insightful analysis. Adhering to ethical standards, optimizing sample size, and adapting to unforeseen variables are key challenges that require thoughtful solutions. 

Real-world applications showcase the transformative potential of controlled experiments across varied domains, emphasizing their indispensable role in evidence-based decision-making and progress.

• https://www.khanacademy.org/science/biology/intro-to-biology/science-of-biology/a/experiments-and-observations
• https://www.scribbr.com/methodology/controlled-experiment/
• https://link.springer.com/10.1007/978-1-4899-7687-1_891
• http://ai.stanford.edu/~ronnyk/GuideControlledExperiments.pdf
• https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6776925/
• https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4017459/
• https://www.merriam-webster.com/dictionary/controlled%20experiment

About Author

Krisha Karki

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Activities, Experiments, Online Games, Visual Aids
• Activities, Experiments, and Investigations
• Experimental Design and the Scientific Method

Experimental Design - Independent, Dependent, and Controlled Variables

To view these resources with no ads, please login or subscribe to help support our content development. school subscriptions can access more than 175 downloadable unit bundles in our store for free (a value of $1,500). district subscriptions provide huge group discounts for their schools. email for a quote: [email protected] ..

Scientific experiments are meant to show cause and effect of a phenomena (relationships in nature).  The “ variables ” are any factor, trait, or condition that can be changed in the experiment and that can have an effect on the outcome of the experiment.

An experiment can have three kinds of variables: i ndependent, dependent, and controlled .

• The independent variable is one single factor that is changed by the scientist followed by observation to watch for changes. It is important that there is just one independent variable, so that results are not confusing.
• The dependent variable is the factor that changes as a result of the change to the independent variable.
• The controlled variables (or constant variables) are factors that the scientist wants to remain constant if the experiment is to show accurate results. To be able to measure results, each of the variables must be able to be measured.

For example, let’s design an experiment with two plants sitting in the sun side by side. The controlled variables (or constants) are that at the beginning of the experiment, the plants are the same size, get the same amount of sunlight, experience the same ambient temperature and are in the same amount and consistency of soil (the weight of the soil and container should be measured before the plants are added). The independent variable is that one plant is getting watered (1 cup of water) every day and one plant is getting watered (1 cup of water) once a week. The dependent variables are the changes in the two plants that the scientist observes over time.

Can you describe the dependent variable that may result from this experiment? After four weeks, the dependent variable may be that one plant is taller, heavier and more developed than the other. These results can be recorded and graphed by measuring and comparing both plants’ height, weight (removing the weight of the soil and container recorded beforehand) and a comparison of observable foliage.

Using What You Learned: Design another experiment using the two plants, but change the independent variable. Can you describe the dependent variable that may result from this new experiment?

Think of another simple experiment and name the independent, dependent, and controlled variables. Use the graphic organizer included in the PDF below to organize your experiment's variables.

Please Login or Subscribe to access downloadable content.

Citing Research References

When you research information you must cite the reference. Citing for websites is different from citing from books, magazines and periodicals. The style of citing shown here is from the MLA Style Citations (Modern Language Association).

When citing a WEBSITE the general format is as follows. Author Last Name, First Name(s). "Title: Subtitle of Part of Web Page, if appropriate." Title: Subtitle: Section of Page if appropriate. Sponsoring/Publishing Agency, If Given. Additional significant descriptive information. Date of Electronic Publication or other Date, such as Last Updated. Day Month Year of access < URL >.

Here is an example of citing this page:

Amsel, Sheri. "Experimental Design - Independent, Dependent, and Controlled Variables" Exploring Nature Educational Resource ©2005-2024. March 25, 2024 < http://www.exploringnature.org/db/view/Experimental-Design-Independent-Dependent-and-Controlled-Variables >

Exploringnature.org has more than 2,000 illustrated animals. Read about them, color them, label them, learn to draw them.

Controlling Variables

by Anthony Carpi, Ph.D., Anne E. Egger, Ph.D.

This material is excerpted from a teaching module on the Visionlearning website, to view this material in context, please visit Research Methods: Experimentation.

Controlling variables is an important part of experimental design. Controlled variables refer to variables or contributing factors that are fixed or eliminated in order to clearly identify the relationship between an independent variable and a dependent variable . For example, in an experiment designed to quantify the effect of vitamin A dose on the metabolism of beta-carotene in humans, Shawna Lemke and colleagues had to precisely control the diet of their human volunteers (Lemke, Dueker et al. 2003). They asked their participants to limit their intake of foods rich in vitamin A and further asked that they maintain a precise log of all foods eaten for 1 week prior to their study. At the time of their study, they controlled their participants’ diet by feeding them all the same meals, described in the methods section of their research article in this way, “Meals were controlled for time and content on the dose administration day. Lunch was served at 5.5 h postdosing and consisted of a frozen dinner (Enchiladas, Amy's Kitchen, Petaluma, CA), a blueberry bagel with jelly, 1 apple and 1 banana, and a large chocolate chunk cookie (Pepperidge Farm). Dinner was served 10.5 h post dose and consisted of a frozen dinner (Chinese Stir Fry, Amy's Kitchen) plus the bagel and fruit taken for lunch.”

Controlling variables is important because slight variations in the experimental set-up could strongly affect the outcome being measured. For example, during the 1950s, a number of experiments were conducted to evaluate the toxicity in mammals of the metal molybdenum, using rats as experimental subjects . Unexpectedly, these experiments seemed to indicate that the type of cage the rats were housed in affected the toxicity of molybdenum. In response, G. Brinkman and Russell Miller set up an experiment to investigate this observation (Brinkman & Miller, 1961). Brinkman and Miller fed two groups of rats a normal diet that was supplemented with 200 parts per million (ppm) of molybdenum. One group of rats was housed in galvanized steel (steel coated with zinc to reduce corrosion) cages and the second group was housed in stainless steel cages. Rats housed in the galvanized steel cages suffered more from molybdenum toxicity than the other group: they had higher concentrations of molybdenum in their livers and lower blood hemoglobin levels. It was then shown that when the rats chewed on their cages, those housed in the galvanized metal cages absorbed zinc plated onto the metal bars and zinc is now known to affect the toxicity of molybdenum. In order to control for zinc exposure, then, stainless steel cages needed to be used for all rats.

While controlling variables is an important aspect of making an experiment manageable and informative, it is often not representative of the real world, in which many variables may change at once, including the foods you eat. Still, experimental research is an excellent way of determining relationships between variables that can be later validated in real world settings through descriptive or comparative studies.

Activate glossary term highlighting to easily identify key terms within the module. Once highlighted, you can click on these terms to view their definitions.

Activate NGSS annotations to easily identify NGSS standards within the module. Once highlighted, you can click on them to view these standards.

What Is the Difference Between a Control Variable and Control Group?

Hiya Images/Corbis/VCG/Getty Images

• Scientific Method
• Chemical Laws
• Periodic Table
• Projects & Experiments
• Biochemistry
• Physical Chemistry
• Medical Chemistry
• Chemistry In Everyday Life
• Famous Chemists
• Activities for Kids
• Abbreviations & Acronyms
• Weather & Climate
• Ph.D., Biomedical Sciences, University of Tennessee at Knoxville
• B.A., Physics and Mathematics, Hastings College

In experiments, controls are factors that you hold constant or don't expose to the condition you are testing. By creating a control, you make it possible to determine whether the variables alone are responsible for an outcome. Although control variables and the control group serve the same purpose, the terms refer to two different types of controls which are used for different kinds of experiments.

Why Experimental Controls Are Necessary

A student places a seedling in a dark closet, and the seedling dies. The student now knows what happened to the seedling, but he doesn't know why. Perhaps the seedling died from lack of light, but it might also have died because it was already sickly, or because of a chemical kept in the closet, or for any number of other reasons. 

In order to determine why the seedling died, it is necessary to compare that seedling's outcomes to another identical seedling outside the closet. If the closeted seedling died while the seedling kept in sunshine stayed alive, it's reasonable to hypothesize that darkness killed the closeted seedling. 

Even if the closeted seedling died while the seedling placed in sunshine lived, the student would still have unresolved questions about her experiment. Might there be something about the particular seedlings that caused the results she saw? For example, might one seedling have been healthier than the other to start with?

To answer all of her questions, the student might choose to put several identical seedlings in a closet and several in the sunshine. If at the end of a week, all of the closeted seedlings are dead while all of the seedlings kept in​ the sunshine are alive, it is reasonable to conclude that the darkness killed the seedlings.

Definition of a Control Variable

A control variable is any factor you control or hold constant during an experiment. A control variable is also called a controlled variable or constant variable. 

If you are studying the effect of the amount of water on seed germination, control variables might include temperature, light, and type of seed. In contrast, there may be variables you can't easily control, such as humidity, noise, vibration, and magnetic fields.

Ideally, a researcher wants to control every variable, but this isn't always possible. It's a good idea to note all recognizable variables in a lab notebook for reference.

Definition of a Control Group

A control group is a set of experimental samples or subjects that are kept separate and aren't exposed to the independent variable .

In an experiment to determine whether zinc helps people recover faster from a cold, the experimental group would be people taking zinc, while the control group would be people taking a placebo (not exposed to extra zinc, the independent variable).

A controlled experiment is one in which every parameter is held constant except for the experimental (independent) variable. Usually, controlled experiments have control groups. Sometimes a controlled experiment compares a variable against a standard.

• Scientific Method Vocabulary Terms
• The Role of a Controlled Variable in an Experiment
• Understanding Simple vs Controlled Experiments
• What Are the Elements of a Good Hypothesis?
• What Is a Controlled Experiment?
• Six Steps of the Scientific Method
• DRY MIX Experiment Variables Acronym
• What Is an Experimental Constant?
• Scientific Method Flow Chart
• Scientific Variable
• What Are Examples of a Hypothesis?
• What Is a Testable Hypothesis?
• Null Hypothesis Examples
• What Is a Hypothesis? (Science)
• Scientific Hypothesis Examples
• Random Error vs. Systematic Error

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• A Quick Guide to Experimental Design | 5 Steps & Examples

A Quick Guide to Experimental Design | 5 Steps & Examples

Published on 11 April 2022 by Rebecca Bevans . Revised on 5 December 2022.

Experiments are used to study causal relationships . You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design means creating a set of procedures to systematically test a hypothesis . A good experimental design requires a strong understanding of the system you are studying. 

There are five key steps in designing an experiment:

• Consider your variables and how they are related
• Write a specific, testable hypothesis
• Design experimental treatments to manipulate your independent variable
• Assign subjects to groups, either between-subjects or within-subjects
• Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any  extraneous variables that might influence your results. If if random assignment of participants to control and treatment groups is impossible, unethical, or highly difficult, consider an observational study instead.

Table of contents

Step 1: define your variables, step 2: write your hypothesis, step 3: design your experimental treatments, step 4: assign your subjects to treatment groups, step 5: measure your dependent variable, frequently asked questions about experimental design.

You should begin with a specific research question . We will work with two research question examples, one from health sciences and one from ecology:

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables .

Then you need to think about possible extraneous and confounding variables and consider how you might control  them in your experiment.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Prevent plagiarism, run a free check.

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

The next steps will describe how to design a controlled experiment . In a controlled experiment, you must be able to:

• Systematically and precisely manipulate the independent variable(s).
• Precisely measure the dependent variable(s).
• Control any potential confounding variables.

If your study system doesn’t match these criteria, there are other types of research you can use to answer your research question.

How you manipulate the independent variable can affect the experiment’s external validity – that is, the extent to which the results can be generalised and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

• just slightly above the natural range for your study region.
• over a wider range of temperatures to mimic future warming.
• over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

• a categorical variable : either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
• a continuous variable (minutes of phone use measured every night).

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size : how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment’s statistical power , which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups . Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group , which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

• A completely randomised design vs a randomised block design .
• A between-subjects design vs a within-subjects design .

Randomisation

An experiment can be completely randomised or randomised within blocks (aka strata):

• In a completely randomised design , every subject is assigned to a treatment group at random.
• In a randomised block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.

Sometimes randomisation isn’t practical or ethical , so researchers create partially-random or even non-random designs. An experimental design where treatments aren’t randomly assigned is called a quasi-experimental design .

Between-subjects vs within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomising or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn’t influence the results of the experiment.

Finally, you need to decide how you’ll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimise bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalised to turn them into measurable observations.

• Ask participants to record what time they go to sleep and get up each day.
• Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

• A testable hypothesis
• One or more independent variables that you will manipulate
• One or more dependent variables that you will measure

When designing the experiment, first decide:

• How your variable(s) will be manipulated
• How you will control for any potential confounding or lurking variables
• How many subjects you will include
• How you will assign treatments to your subjects

The key difference between observational studies and experiments is that, done correctly, an observational study will never influence the responses or behaviours of participants. Experimental designs will have a treatment condition applied to at least a portion of participants.

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word ‘between’ means that you’re comparing different conditions between groups, while the word ‘within’ means you’re comparing different conditions within the same group.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bevans, R. (2022, December 05). A Quick Guide to Experimental Design | 5 Steps & Examples. Scribbr. Retrieved 3 September 2024, from https://www.scribbr.co.uk/research-methods/guide-to-experimental-design/

Is this article helpful?

Rebecca Bevans

Control Group vs Experimental Group

Julia Simkus

Editor at Simply Psychology

BA (Hons) Psychology, Princeton University

Julia Simkus is a graduate of Princeton University with a Bachelor of Arts in Psychology. She is currently studying for a Master's Degree in Counseling for Mental Health and Wellness in September 2023. Julia's research has been published in peer reviewed journals.

Learn about our Editorial Process

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

In a controlled experiment , scientists compare a control group, and an experimental group is identical in all respects except for one difference – experimental manipulation.

Differences

Unlike the experimental group, the control group is not exposed to the independent variable under investigation. So, it provides a baseline against which any changes in the experimental group can be compared.

Since experimental manipulation is the only difference between the experimental and control groups, we can be sure that any differences between the two are due to experimental manipulation rather than chance.

Almost all experimental studies are designed to include a control group and one or more experimental groups. In most cases, participants are randomly assigned to either a control or experimental group.

Because participants are randomly assigned to either group, we can assume that the groups are identical except for manipulating the independent variable in the experimental group.

It is important that every aspect of the experimental environment is the same and that the experimenters carry out the exact same procedures with both groups so researchers can confidently conclude that any differences between groups are actually due to the difference in treatments.

Control Group

A control group consists of participants who do not receive any experimental treatment. The control participants serve as a comparison group.

The control group is matched as closely as possible to the experimental group, including age, gender, social class, ethnicity, etc.

The difference between the control and experimental groups is that the control group is not exposed to the independent variable , which is thought to be the cause of the behavior being investigated.

Researchers will compare the individuals in the control group to those in the experimental group to isolate the independent variable and examine its impact.

The control group is important because it serves as a baseline, enabling researchers to see what impact changes to the independent variable produce and strengthening researchers’ ability to draw conclusions from a study.

Without the presence of a control group, a researcher cannot determine whether a particular treatment truly has an effect on an experimental group.

Control groups are critical to the scientific method as they help ensure the internal validity of a study.

Assume you want to test a new medication for ADHD . One group would receive the new medication, and the other group would receive a pill that looked exactly the same as the one that the others received, but it would be a placebo. The group that takes the placebo would be the control group.

Types of Control Groups

Positive control group.

• A positive control group is an experimental control that will produce a known response or the desired effect.
• A positive control is used to ensure a test’s success and confirm an experiment’s validity.
• For example, when testing for a new medication, an already commercially available medication could serve as the positive control.

Negative Control Group

• A negative control group is an experimental control that does not result in the desired outcome of the experiment.
• A negative control is used to ensure that there is no response to the treatment and help identify the influence of external factors on the test.
• An example of a negative control would be using a placebo when testing for a new medication.

Experimental Group

An experimental group consists of participants exposed to a particular manipulation of the independent variable. These are the participants who receive the treatment of interest.

Researchers will compare the responses of the experimental group to those of a control group to see if the independent variable impacted the participants.

An experiment must have at least one control group and one experimental group; however, a single experiment can include multiple experimental groups, which are all compared against the control group.

Having multiple experimental groups enables researchers to vary different levels of an experimental variable and compare the effects of these changes to the control group and among each other.

Assume you want to study to determine if listening to different types of music can help with focus while studying.

You randomly assign participants to one of three groups: one group that listens to music with lyrics, one group that listens to music without lyrics, and another group that listens to no music.

The group of participants listening to no music while studying is the control group, and the groups listening to music, whether with or without lyrics, are the two experimental groups.

Frequently Asked Questions

1. what is the difference between the control group and the experimental group in an experimental study.

Put simply; an experimental group is a group that receives the variable, or treatment, that the researchers are testing, whereas the control group does not. These two groups should be identical in all other aspects.

2. What is the purpose of a control group in an experiment

A control group is essential in experimental research because it:

Provides a baseline against which the effects of the manipulated variable (the independent variable) can be measured.

Helps to ensure that any changes observed in the experimental group are indeed due to the manipulation of the independent variable and not due to other extraneous or confounding factors.

Helps to account for the placebo effect, where participants’ beliefs about the treatment can influence their behavior or responses.

In essence, it increases the internal validity of the results and the confidence we can have in the conclusions.

3. Do experimental studies always need a control group?

Not all experiments require a control group, but a true “controlled experiment” does require at least one control group. For example, experiments that use a within-subjects design do not have a control group.

In  within-subjects designs , all participants experience every condition and are tested before and after being exposed to treatment.

These experimental designs tend to have weaker internal validity as it is more difficult for a researcher to be confident that the outcome was caused by the experimental treatment and not by a confounding variable.

4. Can a study include more than one control group?

Yes, studies can include multiple control groups. For example, if several distinct groups of subjects do not receive the treatment, these would be the control groups.

5. How is the control group treated differently from the experimental groups?

The control group and the experimental group(s) are treated identically except for one key difference: exposure to the independent variable, which is the factor being tested. The experimental group is subjected to the independent variable, whereas the control group is not.

This distinction allows researchers to measure the effect of the independent variable on the experimental group by comparing it to the control group, which serves as a baseline or standard.

Bailey, R. A. (2008). Design of Comparative Experiments. Cambridge University Press. ISBN 978-0-521-68357-9.

Hinkelmann, Klaus; Kempthorne, Oscar (2008). Design and Analysis of Experiments, Volume I: Introduction to Experimental Design (2nd ed.). Wiley. ISBN 978-0-471-72756-9.

• Science Notes Posts
• Contact Science Notes
• Todd Helmenstine Biography
• Anne Helmenstine Biography
• Free Printable Periodic Tables (PDF and PNG)
• Periodic Table Wallpapers
• Interactive Periodic Table
• Periodic Table Posters
• Science Experiments for Kids
• How to Grow Crystals
• Chemistry Projects
• Fire and Flames Projects
• Holiday Science
• Chemistry Problems With Answers
• Physics Problems
• Unit Conversion Example Problems
• Chemistry Worksheets
• Biology Worksheets
• Periodic Table Worksheets
• Physical Science Worksheets
• Science Lab Worksheets
• My Amazon Books

Types of Variables in Science Experiments

In a science experiment , a variable is any factor, attribute, or value that describes an object or situation and is subject to change. An experiment uses the scientific method to test a hypothesis and establish whether or not there is a cause and effect relationship between two variables: the independent and dependent variables. But, there are other important types of variables, too, including controlled and confounding variables. Here’s what you need to know, with examples.

The Three Main Types of Variables – Independent, Dependent, and Controlled

An experiment examines whether or not there is a relationship between the independent and dependent variables. The independent variable is the one factor a researcher intentionally changes or manipulates. The dependent variable is the factor that is measured, to see how it responds to the independent variable.

For example , consider an experiment looking to see whether taking caffeine affects how many words you remember from a list. The independent variable is the amount of caffeine you take, while the dependent variable is how many words you remember.

But, there are lot more potential variables you control (and usually measure and record) so you get the truest results from the experiment. The controlled variables are factors you hold steady so they don’t affect the results. In this experiment, examples include the amount and source of the caffeine (coffee? tea? caffeine tablets?), the time between taking the caffeine and recalling the words, the number and order of words on the list, the temperature of the room, and anything else you think might matter. Observing and recording controlled variables might not seem very important, but if someone goes to repeat your experiment and gets different results, it might turn out that a controlled variable has a bigger effect than you suspected!

Confounding Variables

A confounding variable is a variable that has a hidden effect on the results. Sometimes, once you identify a confounding variable, you can turn it into a controlled variable in a later experiment. In the coffee experiment, examples of confounding variables include a subject’s sensitivity to caffeine and the time of day that you conduct the experiment. Age and initial hydration levels are additional factors that may confound the results.

Other Types of Variables

Other types of variables get their names from special properties:

• Binary variable : A binary variable has exactly two states. Examples include on/off and heads/tails.
• Categorical or qualitative variable : A categorical or qualitative variable is one that does not have a numerical value. For example, if you compare the health benefits of walking, riding a bike, or driving a car, the modes of transport are descriptive and not numerical.
• Composite variable : A composite variable is a combination of multiple variable. Researchers use these for improving ease of data reporting. For example, a “good” water quality score includes samples that are low in turbidity, bacteria, heavy metals, and pesticides.
• Continuous variable : A continuous variable has an infinite number of values within a set range. For example, the height of a building ranges anywhere between zero and some maximum. When you measure the value, there is some level of error, often from rounding.
• Discrete variable : In contrast to a continuous variable, a discrete variable has a finite number of exact values. For example, a light is either on or off. The number of people in a room has an exact value (4 and never 3.91).
• Latent variable : A latent variable is one you can’t measure directly. For example, you can’t tell the salt tolerance of a plant, but can infer it by whether leaves appear healthy.
• Nominal variable : A nominal variable is a type of qualitative variable, where the attribute has a name or category instead of a number. For example, colors and brand names are nominal variables.
• Numeric or quantitative variable : This is a variable that has a numerical value. Length and mass are good examples.
• Ordinal variable : An ordinal variable has a ranked value. For example, rating a factor as bad, good, better, or best illustrates an ordinal system.
• Babbie, Earl R. (2009). The Practice of Social Research (12th ed.). Wadsworth Publishing. ISBN 0-495-59841-0.
• Creswell, John W. (2018). Educational Research: Planning, Conducting, and Evaluating Quantitative and Qualitative Research (6th ed.). Pearson. ISBN 978-0134519364.
• Dodge, Y. (2008). The Concise Encyclopedia of Statistics. Springer Reference. ISBN 978-0397518371.
• Given, Lisa M. (2008). The SAGE Encyclopedia of Qualitative Research Methods . Los Angeles: SAGE Publications. ISBN 978-1-4129-4163-1.
• Kuhn, Thomas S. (1961). “The Function of Measurement in Modern Physical Science”. Isis . 52 (2): 161–193 (162). doi: 10.1086/349468

Related Posts