how to make resume design engineer

Resume Builder

• Resume Experts
• Search Jobs
• Search for Talent
• Employer Branding
• Outplacement
• Resume Samples

Design Engineer Resume Samples

The guide to resume tailoring.

Guide the recruiter to the conclusion that you are the best candidate for the design engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies, tailor your resume & cover letter with wording that best fits for each job you apply.

Create a Resume in Minutes with Professional Resume Templates

• Develop and improve processes and standards for developing test equipment
• Assist Product Team Manager and BOM Technician in the development of Bill of Material (BOM’s) and Engineering Change Notice (ECN’s)
• Working closely with other team members to understand design architecture and to propose solution to improve/enhance performance with given SoC/IP and markets
• Notifies management of unsafe working conditions or practices in and out of assigned work area
• Develops product design plans including budgets and schedules. Executes to plan and assists in control of project
• Work with Design Manager and Senior Design Engineers to develop design and drawing release schedules
• Working knowledge in configuration management tools and linux and windows development environments
• Develop test plans for testing prototype and/or development units, analyze test failures and develop/implement design improvements based on test results
• Assist the Project Manager the development of intellectual property generated through the Research & Development activities
• Work in compliance with the Traffic Management Act and New Roads and Streetworks Act to obtain the relevant network access agreements
• To work with cross functional teams and with a global network of people within Product Development, Purchasing, Global Manufacturing and Aftermarket
• Designs, develops, and executes scripts for more complex automation, performance testing, tools, or harness assignments
• Understands and follows existing policies, procedures, work instructions and standards and makes recommendations for continuous improvements
• Assisting the PMC Interface Manager to ensure that design and construction interfaces with the marine work and infrastructure packages are properly addressed
• Good knowledge in component manufacturing processes and techniques, Strong ability to plan, prioritise and co-ordinate with work of others
• Good working knowledge of Excel, Word and PowerPointGood knowledge of materials and its application
• Fair Knowledge of GD&T as per ASME Y14.5- ASME GD&T certification highly desirable
• Highly developed PC and systems capability with an excellent
• 3D Solid Modeling (Working knowledge of SolidWorks is a plus)
• Good knowledge in component manufacturing processes and techniques, advantages to have tooling, plastic injection molding knowledge
• Detailed knowledge of different designing tools with SOLID WORK and AUTO CAD essential
• Strong leadership ability and excellent communication skills are necessary
• Extensive knowledge of Materials, Mechanics, Heat Transfer. Basic knowledge of DC Circuits
• Expertise in CAD modelling and detailing using Creo and Solidworks, capable of doing engineering analysis

15 Design Engineer resume templates

Read our complete resume writing guides

How to tailor your resume, how to make a resume, how to mention achievements, work experience in resume, 50+ skills to put on a resume, how and why put hobbies, top 22 fonts for your resume, 50 best resume tips, 200+ action words to use, internship resume, killer resume summary, write a resume objective, what to put on a resume, how long should a resume be, the best resume format, how to list education, cv vs. resume: the difference, include contact information, resume format pdf vs word, how to write a student resume, design engineer resume examples & samples.

• Review leases from MEP standpoint to determine if Landlord’s are providing sufficient utilities
• Manage 3rd party A/E firms and Commissioning Vendors
• Perform electrical system calculations and studies for electrical power systems – load flow, voltage drop, motor starting, short circuit studies, and relay coordination
• Audit construction documents for accuracy
• Review MEP Submittals, Air/Water Balances, and Control Shop Drawings
• Assist the Construction Manager with RFI”s as required
• Work cross functionally with multiple project stakeholders
• Bachelors of Science in Electrical engineering from a ABET University
• Minimum 3+ years of engineering design experience
• Must have strong knowledge of electrical distribution systems
• EIT certification required; PE preferred
• Experience with Energy Modeling
• Basic knowledge of HVAC and Controls
• Strong AutoCAD skills required
• Ability to read blueprints
• Desire and ability to work in a fast-paced, demanding work environment
• Experience in a retail environment preferred
• 10% domestic and international travel will be required for this position
• Subject Matter Expertise: A deep understanding of the technologies, principals and methods with the discipline area of focus
• Strong background in designing Oracle Database solutions (Database as a Service)
• Broadness of Technical Knowledge: A broad functional understanding of various areas of technology outside of their subject matter focus area. All engineering should have a working knowledge of the Platforms / Operating Systems, Networking / Communications, and Testing principles
• Provide leadership in the implementation of the new products and processes in the company ensuring compliance to industry and group standards
• Complete product designs, testing, validation and engineering structures for new products
• Provide regular reporting and communications on status for the introduction of new products to the programme milestones
• Understand industry design specifications and technical criteria to develop product designs based on customer and market specifications
• Execution of strong project management techniques in delivering the programme within budget and to defined timelines
• Collaborate with Quality Assurance, New Product Development, Manufacturing, Production, Supply Chain and Marketing departments vis-e-vie product designs, materials, test methodologies, process development, etc
• Read and understand project specifications and MEP drawing sets
• Performs tasks requiring intermediate level programming experience
• Utilizes company or customer standard programs for designing the graphic function blocks for assigned projects. The goal is to utilize standard programs on multiple projects and only utilize custom programs where it is absolutely necessary
• Tests the project’s programs to ensure they meet the specified sequences of operation and that they perform according to industry standards
• Familiarity with how to check out an HVAC system including point-to-point, determining the proper operating ranges for field devices, as well as complete functional system checkouts
• Creates project database utilizing company and customer standards
• Contribute to and maintain programming and graphics standards library
• As needed, conduct graphics engineering functions. Which include: create Equipment and Floor plan graphics per project documents, create ALC graphics submittal packagesas required, review graphics as a completed package, for completeness and accuracy, develop and maintain graphic library, and participate in solution of job-related graphic problems
• Participate in solution of job-related software and/or graphic problems
• Coordinate and participate in system specialist hand-off meetings for the turnover of complex software projects
• May be required to provide project specific customer training
• Must be able to communicate with third party BAS equipment manufactures to determine integration solutions
• Must possess the ability work well with others in a team environment as well as individually
• Must be a self-starter and possess the ability to organize and plan your work schedule
• Must possess the ability to work without close supervisionMaintain a professional presentation in appearance at all times
• Must be able to multitask – be a able to work on multiple tasks/ projects at one time
• With minimal assistance, will be able to work with database structures including but not limited to MS SQL and My SQL
• Effectively communicate with fellow employees and actively participate in team building
• Provide technical assistance to the sales engineer team
• Familiarity with the following tools would be helpful: VCS, design compiler, LEC, Lintra, and Spyglass
• Familiarity with IOSF, Chassis 2.x, and the SoC design flow is a plus
• Knowledgeable in pre-silicon design verification using OVM
• Able to develop test plans and coverage/event points for validation purposes
• Strong analytic skills and creative problem solving abilities
• Experience with PC platform architecture & notebook/tablet electrical design of motherboard and daughter cards
• Experience with system and component level debug
• Experience transforming ideas into realistic solutions
• 4+ years of experience with oscilloscopes, logic analyzers, function generators, DMM
• 4+ years of experience Type 3 and Type 4 HDI PCB layout designs
• 4+ years' experience in high-speed digital circuit board design and layout
• Strong verbal and written communication skills for interacting with design, manufacturing engineers, customers, technical marketing engineers, material planners, and program managers
• Strong work ethics and team player
• Positive "can-do" attitude
• Ability to deal with ambiguity and changes in product requirements
• Strategic Orientation: Understands basic organizational issues and unit strategies; Describes main issues at stake in own area and helps direct reports to prioritize efforts
• Market Inspiration: Understands immediate operating context; Articulates how -Intel's and services meet customer needs; Seeks existing market research to get better understanding of the current trends in the environment and shares this with direct reports, others
• Business & Financial Acumen: Is able to manage budgets and resources for profitability; works towards financial goals outlined for the business unit
• Team Leadership: Leads by example to build trust; Encourages an open dialogue environment within team honoring diverse perspectives; Works to build relationships with others; Celebrates successes of individuals and team
• Organizational Capability: Supports talent development; Clearly identifies the responsibilities and expectations for roles; Assesses skills and capabilities within team to identify gaps; Encourages those who try to develop or who show improvement
• Change Leadership: Accepts change and is committed to leading the change effort within team; Is able to present a case for change to influence others
• Disciplined Collaboration: Works cooperatively with others; Assumes a positive intent when others express a divergent opinion or perspective; Builds a network across the organization and externally for future collaborative efforts and reciprocity
• Decision Making: Uses basic decision making approaches and is comfortable with structured decision domains; Projects an open mind and recognizes the need for diverse perspectives (e.g. expertise, approach, culture, gender, etc.) and alternatives, providing clear, direct communication of decision status
• Results Orientation: Organizes team and resources to achieve assigned goals; Motivates others to achieve goals
• Provide technical leadership for all design related tasks of the project assigned while working with the following
• Project Head to ensure that design tasks are properly managed to achieve project delivery in accordance with project plans
• Executes design activities including
• Customer / Suppliers
• Liaise with customer/Suppliers for all design related issues
• Foster strong customer relationships through accountability, transparency and credibility
• Integration / Planning
• Responsible and accountable for all design tasks and its completion dates
• Sets design team priorities and objectives with a strong drive to meet expectations
• Communicates progress and roadblocks with the Integrated Product Team (IPT) and the project head
• Design Tasks
• Reviews, recommends, coordinates design, drawing changes activity with customer, other Company disciplines and coordinates activities between production, manufacturing and engineering
• Generates design documentation such as tolerance stack-ups, interface agreements and proximity sensing analysis
• Investigates design related issues and develops effective solutions
• Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS Engineering methodologies
• Generate design layouts, developmental and kinematic assemblies within Catia V5
• Direct detail designers and check their output to ensure compliance to functional and customer requirements
• Utilize UPI tools to facilitate execution for design related tasks
• Present designs at internal and external design reviews to ensure the design meets requirements and expectations
• Develop and achieve agreement on Landing Gear interfaces with customers and suppliers
• Problem Resolution
• Performs Engineering investigations into failures and participates in Root Cause and Corrective Action
• Ensure timely and satisfactory resolution of problems
• Ensures compliance to UTAS engineering methodologies by providing direction/guidance to the design team
• Maintains compliance to ITAR and regulatory requirements
• Occasional travel between customer/suppliers and UTAS locations
• Perform other duties as required
• In depth knowledge of MS programs ( Word, Excel, Project, PPT)
• In depth knowledge of Catia V5 - advance methods, kinematics, functional tolerance and annotation and drafting / interoperability
• Working knowledge of Engineering PDM systems
• Begin partnering with and providing technical guidance within and between teams
• Gather relevant information, compare and contrast data, identify relationships and predict performance
• Perform product and process maintenance
• Master’s degree (or equivalent) in an accredited Engineering, Computer Science, or Materials Science curriculum
• Takes responsibility for the design concept and design layout using computer graphics system
• Performs design calculations and participates in design decisions
• Along with the supporting technical team, provides technical leadership to Manufacturing, Quality, Purchasing, Marketing, Sales, Service and other areas
• Works with considerable latitude in coordinating and providing design expertise
• Consults with engineers to determine work objectives and the means to achieve them
• Provides technical leadership for Designers, Layout Drafters, Drafting Technicians and purchased drafting support
• Maintains close communications with Assemblers and Test Engineers during product buildup and testing
• Bachelor’s degree in an accredited Engineering curriculum plus 1 to 2 years experience or a masters or doctorate degree
• Must have strong problem solving skills, a good mechanical aptitude, and good communications skills
• Proficiency in Pro/E or other modeling or simulation tools
• Experience with Mechanical Components
• Conceives product design concepts and prepares design layouts of systems and major components by manual means or by using a computer graphics system
• Works closely with Test & Evaluation engineers and technicians, plant personnel, and suppliers regarding product design, test and production schedule dates
• Refines and improves product designs by investigating and developing solutions to product design problems
• Works with customers, dealers, and other departments throughout the resolution process
• Provides leadership to drafting personnel and assembly engineers
• Furnishes technical leadership for Designers, Layout Drafters, Drafting Technicians, and =purchased drafting support in assigned areas of responsibility
• Frequently travels to foreign and domestic production plants, dealerships and customer job sites to solve design problems and to field test locations to assist with the development of engineering projects
• Engineering degree,and 2 to 4 years in progressive engineering assignments to gain a mastery of engineering disciplines
• Requires good communication skills
• Responsibilities can include New Product Development,
• Cost Reduction (localization efforts),
• Should Cost Modeling,
• Supplier Development,
• Factory Support, and Product Quality Resolution
• This individual will also participate in design, virtual builds and audits, and technical reviews. This position will be located in Monterrey Mexico
• BSME degree or comparable Engineering degree
• Proficient using Pro/E Creo design software
• 2 or more years of experience designing fabricated structures and sheet metal assemblies
• Automotive, Ag, and/or on highway truck experience a plus
• Knowledge of steel fabrication processes including forming, cutting, stamping, and welding
• Tooling design practices and knowledge is also a plus
• Experience using APQP and CPPD with supply base
• Proficient using geometric dimensioning & tolerancing
• Ability to communicate fluently in English
• System Level knowledge on Transmission Concept on counter shaft / planetary design and evaluate new products & processes
• Expert Level knowledge in transmission components design like Castings, Gears, Shaft & Bearing
• Provide technical guidance within the team and supporting organizations
• Makes calculations, design decisions and necessary analysis and computer simulations
• Must be able to effectively program manage their projects, identifying resources and managing to deadlines
• Collaborate with Manufacturing, Product support, and Quality & Reliability groups to develop the design in a CPPD environment
• Person must be able to communicate technically with process partners on a regular basis to enhance relationship
• Person will be responsible to manage the modeling, detailing and engineering release of the designs, working with team members and other teams
• Good at Advanced Pro-E Modeling, Detailing & Assembly of Transmission components
• Good Design knowledge on Transmission are required
• Good product knowledge on Heavy machine construction equipment
• Requires adequate knowledge on general engineering practices and GD&T
• Must have ability to communicate effectively with team members and others in the work group, as well employees in other units, customers and suppliers
• Develop framework/flow/tool to generate random instruction sequences
• Provide stimulus for all areas of X86 ISA
• Provide applications support to verification/post-silicon validation teams
• Provide customer support to verification teams
• Work closely with small team of developers
• Document both from a developer's point of view and user's point of view
• Utilize automation flows to enhance productivity
• Power Delivery
• CMOS Digital Design
• Design Automation Skills
• Deep Sub Micron
• Mixed Signal Circuits and/or RTL Coding and Verification
• Responsible for verification at core level of AMD’s x86 APUs
• Develop assembly level directed tests as needed for the feature
• Develop coverpoints and perform coverage analysis
• Leading or participating in Core level verification as a senior member of the team
• B.E/B.Tech/M.E/M.Tech in Electrical/Electronic Engineering
• Minimum 2+ years’ experience in ASIC Design Verification , with knowledge of Computer Architecture
• Must have excellent knowledge of Core design & verification flows
• Experience in developing complex test bench/model in Verilog, System Verilog or SystemC
• Strong Verilog, System Verilog, PLI/DPI interface, SystemC or C/C++, Perl/shell script programming skills
• Must have good communication skills and the ability and desire to foster a team environment
• EE/ECE/CE/CompSci: BS w/ 3+ yrs, MS w/ 2+ yrs, PhD
• Documented and demonstrable expertise in at least two of the following
• Modern computer architecture including processor pipeline and memory hierarchy
• C++ programming for either hardware modeling, testbench development or projects of similar scope
• Logic design and representing the same in HDL (e.g. Verilog, VHDL)
• Assembly language programming and Instruction Set Architecture of a modern microprocessor
• Hardware Verification methodology and techniques
• Experience working in a Unix/Linux environment
• Demonstrate good communication skills, and abilities to work with a diverse team
• EE/ECE/CE/CompSci: BS w/ 6+ yrs, MS w/ 4+ yrs, PhD w/ 2+ yrs
• Prior Coop, Internship or RA experience in the above listed required skills
• Experience in scripting languages (e.g. Perl, Python, Ruby)
• Experience in hardware/logic simulators (e.g. VCS, NC-Verilog)
• Experience in debug tools or waveform viewers
• Experience in Verification languages (e.g. Specman, System Verilog/UVM)
• Experience in Formal verification tools and techniques
• Experience in modeling hardware designs in emulators or FPGAs
• Defining and implementing testplans
• Developing test benches in System Verilog/UVM
• Developing System Verilog/UVM tests
• Analyzing and debugging regression fails, and analyzing code coverage on next generation CPU projects
• System Verilog/UVM, C/C++, object oriented programming,
• Perl or equivalent scripting languages, assembly
• Verilog simulation and modeling
• Strong knowledge of microprocessor architecture (x86 preferred)
• General verification experience
• Working experience in Unix environment
• Creates concepts and direct the design and development of complex engineering projects
• Travels to foreign and domestic plants, dealerships and customer job sites to solve design problems or to field-test locations to evaluate a product improvement
• Bachelors Degree in Engineering or Technology degree
• 15+ Years product development development experience
• 2+ years Motor Grader electrial installation experience
• Must have a good electrical and mechanical aptitude with ability to develop product concepts
• Requires strong leadership ability and good communications skills
• Knowledge and application for Caterpillar Engineering Standards and 1E Specs
• Hands on experience with the operation or maintenance of construction or agricultural equipment
• 1) This position is responsible for the Design of HydroMechanical Demolition Work Tools Viz Hammers, Breakers, Multi-Processors, Grapples, Shears and other similar Work Tools
• 2) Conceptual design up to development using design softwares & hand calculations as per ISO standards of Work Tools
• 3) Design the Linkage System for Excavator Work attachment to obtain desired Working Range of Digging and crowding forces using C-Link
• 4) Obtain required linkage configuration to satisfy all performance requirements Viz., Dynamics, Functionality, Productivity, Versatility, Modularity etc.,
• 5) Execute Linear static analysis in Pro/Mechanica and strength calculation of structures and fatigue life
• 6) From solid models develop manufacturing Drawings meeting Caterpillar standards Pro/E
• 7) This position is responsible to execute new designs (L3-L5), regionalization, and technical support for sourcing, NPI, cost reduction and support on simplification projects
• 8) Conducts technical evaluations of Worktools on competitive products
• 9) Actively participate in problem-solving analysis and technical discussions & Support supervisor with input and analysis to support decision-making
• 10) Engineers may work in any number of functional areas requiring an engineering degree, including, but not limited to, product design, development, research, metallurgy, quality, materials, manufacturing process, application and installation, product performance, service and facilities
• 1) 5 to 8 years of experience in New Product Design, Integration & Development
• 2) BE/ME in Mechanical Engineering or related engineering major
• 3) Knowledge and ability to apply standard Caterpillar and/or industry design standards and specifications
• 4) Critical Competencies - Initiative, Accountability, Communication Skills (Written/Oral)
• 5) Design/ Manufacturing Knowledge on large structure components
• 6) Ability to effectively communicate in English in work environment
• 7) Strong initiative, communication, interpersonal, and organizational skills
• 8) Excellent problem-solving and people skills
• 9) Working knowledge of Caterpillar's engineering processes
• 10) Demonstrated sense of urgency when it comes to serving internal and external customers
• Candiates from OEM's Preferred
• In this role, you will deepen your knowledge base of Caterpillar’s products, technologies, processes, services and systems, which you will use to
• Conceive product design concepts
• Prepare engineering drawings; and
• Complete engineering design calculations, analysis, and computer simulation
• Bachelor’s degree (or equivalent) in an accredited Engineering, Computer Science, or Materials Science curriculum; and
• 1) This position is responsible for the Design of Medium Wheel Loader / TTT Work
• 5) Execute Linear static analysis in Creo Simulate and evaluate Design for fatigue life using
• 3) Knowledge and ability to apply standard Caterpillar and/or industry design standards and
• 1) Pro/Engineer experience with Strong background in Structural & cast design. 2) Adequate knowledge in SDP fluid lines and tube routing
• 3) Product development experience, including knowledge of the CAT NPI process
• 4) Skilled in use of EDS, Team Center Engineering, CPPD
• 5) Proven ability to handle NPI Design projects individually
• 6) Working knowledge of GD&T (ASME Y14.5), CAT print reading
• 7) Working knowledge on manufacturing & machining processes for fabricated components
• 8) A strong hands on Mechanical aptitude is needed to perform this position's requirements
• 9) 1D AND 2D Tolerance Stack-up using TSU
• 10) Virtual Validation using Creo Simulate and Field Validation and correlation using DATK
• 11) Machine Level Integration Experience
• In this role, you will also deepen your knowledge base of Caterpillar’s products, technologies, processes, services and systems, which you will use to
• Contribute to the design of new products and processes; and
• Own & refine Caterpillar’s A/C hose & connector product strategy. Reference it to answer CRIS requests and develop new couplings, tubes, and adapters by combining existing tech in new ways
• Work closely with PF suppliers and Global Purchasing to design for manufacturing and source production parts and prototype parts in a timely manner
• Interface closely with Process Control Engineer / Supplier Quality Engineer, and Caterpillar’s hose assembly manufacturing organization; answering design questions, and assisting with quality issue resolution as-needed
• Work closely with Caterpillar’s hose engineering team to qualify new and existing hose/coupling combinations
• Develop working knowledge of vehicle air-conditioning systems and develop close working relationship with Caterpillar’s Cabs design team. Assist with design needs and develop products to expand Caterpillar’s A/C hose & connector product offering and ensure future robust A/C system design
• Develop new connection styles as needed to gain new A/C business world-wide
• Interface with Caterpillar’s Design Team in India. Train new designers, consolidate requests from other team engineers into an organized work structure, and check models and print outputs prior to release
• Participate in team brainstorming activities for other coupling or connection development projects
• Bachelor’s degree (or equivalent) in Mechanical Engineering, Mechanical Engineering Technology, or similar technical degree
• Self-starting personality who is organized and possesses the ability to work with minimal direction and accomplish tasks in a timely manner
• Hands-on person who is comfortable in manufacturing and laboratory environments and is able to develop test and validation plans and perform teardown analyses as-needed
• Understanding of mechanical design concepts and tools such as GD&T, tolerance stack-up analysis, and modeling / drafting programs
• Ability to communicate clearly and effectively with the team and a wide variety of customers
• Two years mechanical design experience
• Working knowledge of Pro-E / CREO
• Working knowledge of Teamcenter
• Understanding of Caterpillar’s "EDS" engineering system
• Advanced user of Microsoft Excel
• Bachelor’s degree Engineering, preferably in Mechanical Engineering, Agricultural Engineering, or Materials Science
• Minimum three to five years relevant work experience with mechanical design
• Master’s degree in an accredited Engineering curriculum
• Experience with 6 Sigma projects and/or certifications
• Experience with computer simulation
• Assure that drawing contains all the relevant information required for downstream usage
• Check (simple to medium) to verify, examine, compare necessary information to assure drawings and notices are complete, accurate, clear, conform to Engineering Standards, and follow design practices that ensure performance of the intended function
• Review design layouts /3D Model / Check assembly and piece parts drawings
• Check drawings and Engineering notices for the required information as defined in Engineering standards
• Systematically reviews & checks the new release and revised parts and assembly drawings for completeness of of information, accuracy and conformance to corporate product and process standards, material and process standards, Engineering Specifications and Engineering design references
• Check drawings for possible manufacturing and assembly problems and for cost reductions
• Discuss errors, discrepancies /or deviations to standards with the Engineer / Detailer
• Check form fit and function. Design for manufacturing and assembly
• Collaborate and suggest changes to Design
• Communicate Project Status updates to customer and supplier
• Handle small groups discussion
• Perform Tolerance Stack up as and when required
• Verify the appropriate selection of material and heat treatment spec
• Conceptual design
• Cost value management
• Data analysis and extraction
• Failure resolution and prevention
• Decision quality
• Learning quickly
• Communication with other Engineering Personnel
• Influence and accomplish recommended changes
• BE: 4+ Years
• ME: 2+ Years
• Requires leadership ability and good communications skills
• Proficiency in Pro/E / Creo or other modeling or simulation tools
• 5-7 years of relevant experience
• 5+ years of experience and proven engineering expertise within subject matter domain
• Implementation / architectural experience in Linux, Application Development, Web Application Server, IT Security, Database
• Diverse experience in Identity and Access Management technology to include solutions from IBM Security Access Manager , Oracle Adaptive Access Manager, RSA Access manager, and CA Single Sign On
• Strong background in computer architecture
• Familiarity with modern microprocessor internals
• Programming with C/C++ and scripting languages
• Experience with performance profiling tools
• Relevant internship/project experience is a huge plus
• Creation and oversight of project plans for Design Services activities for which Engineer is responsible
• Creation and development of design concepts and final design solutions for HVAC products using PTC Creo Elements (or Pro/Engineer)
• Lead efforts of tolerance review teams for application of GD&T conforming to ASME Y14.5 (2009)
• Provide/oversee tolerance stack-up analysis on product designs
• Delegate and oversee the creation of engineering documentation for new product releases (drawings, bills of material, and specifications)
• Adhere to design standards as a member of Design Services standard-work team
• Interact as necessary with model makers, manufacturing engineers and outside suppliers / tool makers to provide required models and documentation for their respective activities
• Comply with International Trade Compliance and Export Compliance requirements of UTC / BIS
• Represent Design Services in project governance activities for respective projects
• Support pre-production build activities, located in Collierville, TN or Mexico as required. Embrace the ACE (Achieving Competitive Excellence) culture; support and contribute to an environment of continuous improvement
• Provide guidance and coaching to other team members as needed for Design Services related activities and processes
• Lead efforts to create solid modeling standards and best practices for MASC friendly models
• Develop and execute procedures for early design analysis (FEA, etc…) of components
• Participate in Design Services Resource Planning and work delegation
• May require periodic communication with team members in India during non-standard work hours
• Responsible for several components of a project or a complex component of a larger project
• Makes significant contribution to their team by applying their knowledge of the discipline
• Works with moderate guidance on projects and leads work of departmental team
• Has a solid understanding of the fundamentals of the discipline and role - continuing to develop specialized knowledge
• Research and develop new technology related to exhaust components
• Evaluate new products, processes, or systems. Lead development of air system component business plans
• Perform product maintenance
• CPPD with suppliers
• Bachelor degree in an Engineering
• A minimum of 4 years of Design/Analysis/Validation Engineering experience
• Ability to plan and organize multiple projects
• Master degree in an accredited Engineering, Computer Science, or Materials Science curriculum
• Strong analytical skills including 2 years minimum experience using FEA or/and CFD
• 3 years of Component Design experience
• At least 2 years of project leadership experience
• At least 2 years of experience leading teams
• Minimum of 2 years of validation experience
• Functional Verification and Debug of DFT features (e.g., Memory BIST with repair, Logic BIST, Boundary Scan) in an x86 processor SoC design that consists of multiple IP blocks delivered from many diverse teams
• SoC level testplan creation and development
• Executing verification plan using SystemVerilog/Verilog/C++ using both direct and Constrained Randomized verification methodology. Porting or creating portions of the SOC level DFT Functional verification environment. Stimulus writing (using System Verilog/C++) and debug, and regression cleanup
• Creating & analyzing coverage metrics to ensure completeness
• Experience in complex SOC verification
• Good knowledge of Verilog and experience in Verilog simulator and waveform debugging tools, proficiency in debugging both RTL and gate level simulations. Experience with Verilog design and simulation is a must
• Candidate preferably should have knowledge in DFT techniques such as JTAG/IEEE standards, MBIST and repair, LBIST, Boundary Scan etc
• Experienced with testbench creation and functional coverage with HVL's such as System Verilog/Vera
• Experience with C++ is a plus
• Good working knowledge of UNIX/Linux and scripting languages (e.g., cshell, Perl)
• Have in depth knowledge of entire design process from Design specification, defining architecture, micro-architecture, RTL design and functional verification, synthesis, Physical Design, Timing closure, Tape-out, and post-Si debug
• Should be able to Lead a team, and provide Technical mentoring and guidance to junior engineers
• Some exposure to DFT is a strong plus
• Should have expertise in: Cadence RTL Compiler, Design Compiler, PrimeTime, Conformal LEC. Good knowledge of datapath compilers is required
• Should have proficiency in flow development and scripting
• Expertise in Perl and Tcl is a must
• Should be able to work closely with RTL Designers and Backend Physical Design teams across multiple sites
• Must have good communication & Analytical thinking skills
• Knowledge of chip bus interfaces such as AHB and various standard peripherals & interfaces is a plus
• Bachelor/Master/ Degree in Electrical or Computer Engineering
• Implement power management and infrastructure firmware
• Review design specifications
• Define and document software interfaces
• Design firmware features to improve performance and energy efficiency
• Create coding and testing methodologies to reduce development time and failure rates
• Provide technical leadership to firmware team
• Bachelor’s degree in Electronics/Computer Engineering or Computer Science + 5 years of experience
• Strong background in embedded software development
• Proficient in C/C++ programming
• Familiarity with RTL
• Familiarity with power management architectures
• Strong analytical/problem solving skills and pronounced attention to detail
• Must be a self-starter, and able to independently drive tasks to completion
• On Highway Truck CAD and 3D modeling experience
• Minimum 2 years On Highway Truck development experience
• Experience in the use of Creo, Pro E or Unigraphics
• Bachelors degree in an accredited Engineering or Materials Science curriculum plus 3 or more years of experience in progressive engineering assignments to gain a mastery of complex engineering and manufacturing concepts or a Masters degree in an Engineering or Materials Science curriculum plus 1 or more years of experience in progressive engineering assignments to gain a mastery of complex engineering and manufacturing concepts
• Demonstrated ability to work well in collaborative environment and to communicate effectively in cross-functional teams
• Excellent analytical skills and demonstrated ability to work on complex assignments
• Proficiency with solid modeling software (ProE/CREO preferred)
• Experience directing the work of supporting resources (e.g. solid modeling, detailing) to achieve design goals
• Executed all phases of at least one minor new product development program
• Mechanical or Agricultural Engineering degree
• Design experience on hydraulics subsystems or components on heavy equipment/machinery
• Hands-on experience with machinery, engines, manufacturing processes, or welding, etc
• Experience collaborating with global engineering service providers
• Takes responsibility for the design concept and design layout using a computer graphics system
• Along with the supporting technical team, provides technical leadership to Manufacturing, Quality, Purchasing, Marketing, Sales, Service as a Design Engineer at Caterpillar, you will have an opportunity to perform design, development, and handle the maintenance of new or existing products and components
• Bachelor’s degree in an accredited Engineering, or Materials Science curriculum AND 1-2 years experience OR a Masters or Doctorate Degree
• Must have strong problem solving skills, a good mechanical and/or electrical/electronic aptitude
• Good communications skills
• Proficiency in Pro E/ Creo or a CAD graphics based software system
• Must have strong people skills with ability to work independently
• 1-2 years machine product experience -OR- 1-2 years drive train, power train, final drive, or undercarriage design or test experience
• Familiarity with casting, metallurgy, or manufacturing
• Familiarity with duo cone seals, DF seals, or lip seal design/ development
• Ability to use excel spreadsheets, word, PDF, or communication software packages
• Desire high initiative and self starting capability
• Bachelor’s degree in Computer Science, Engineering, or equivalent experience
• 5-7+ years of proven engineering expertise within infrastructure platforms and/or server provisioning environments
• Deep knowledge and experience engineering or supporting virtualized platforms (e.g. VMware)
• Solid understanding of and experience with clustering and fault tolerant designs
• High reasoning aptitude and ability to quickly understand complex operating environments
• Knowledge and design experience supporting deployment of operating systems such as Windows Server or Red Hat Enterprise Linux
• Knowledge and experience designing, implementing, and operating in public cloud environment (e.g. Azure, AWS, SoftLayer)
• Maintains awareness and expertise relative to evolving technologies and techniques
• Strong thought leadership and motivation with the ability to work independently
• MS in EE/ECE/CE/CompSci
• Logic design and representing the same in HDL (e.g. Verilog or VHDL or similar)
• Experience working in a Unix or Linux environment
• Experience in scripting languages (e.g. Perl or Python or Ruby or similar)
• Experience in hardware/logic simulators (e.g. VCS or NC-Verilog or similar)
• Experience in Verification languages (e.g. Specman or System Verilog or UVM or similar)
• Monitor new ECM failure modes across applications and drive timely resolution
• Provide technical assistance and support for new applications
• Utilize 6 Sigma methodology as a Green Belt for problem resolution
• Verify and Validate electronic hardware changes for production
• Provide technical assessment for product deviation requests
• Assist in the selection and validation of replacement components due to obsolescence
• Execute ECM cost reduction projects in collaboration with suppliers
• Possess either of the following
• Proficiency in circuit design software, such as Mentor Graphics, or other modeling or simulation tools
• Prepares concept, design and development and feasibility studies of complex engineering projects
• Collaborate with suppliers to develop components and subsystems that meet customer and business requirements
• Provides guidance to other engineers responsible for portions of the product project to ensure development schedules
• Bachelors degree in an accredited engineering curriculum plus 3 or more years of experience in progressive engineering
• Hands-on experience (e.g. machinery, heavy equipment, manufacturing processes, welding, etc.)
• Design experience on heavy equipment/machinery
• Design experience with fabricated structures
• Lead CAT Electronics marine engine and marine gensets factory support initiatives
• Lead CAT Electronics Continuous Improvement (CI) Card tracking and resolution
• Lead PSPS activities for MCOE marine engines and gensets
• Lead MO45 activities for MCOE marine engine
• Demonstrate Bollard Pull and/or 110% Overload Test for Dealer/Customer factory witness tests
• Attend and Support weekly MCOE Engine and Genset Quality Audits
• Support MCOE marine engine and genset NPI prototype, pilot, and production rampup
• Review and analyze hotsheets for quality issues or false claims
• Support and/or Lead Local CPI projects
• Support NPI design reviews (Design for Manufacturing)
• Managing job numbers requests for current production drawing changes
• Bachelor’s degree or equivalent technologist degree in an accredited Electrical Engineering
• 2 – 3 years of relevant work experience in Electronic Engine Systems
• Experience reading electrical schematics
• Experience with Engine Electronic Hardware and/or Software
• Experience with CAT ET and CANape
• Proven abilities to work with internal teams
• Good time management and prioritization skills required
• Familiar with factory processes (CI Cards, AQE, Job Numbers, etc)
• Highly organized person with proven electronic troubleshooting skills
• Valid passport & driver’s license required
• Some Weekend Travel may be required
• Willing to commit to minimum 3 years in the job role
• Strong analytical skills (6S BB experience)
• Good communication (powerpoint, excel graphs, etc), interpersonal and collaboration skills
• Experience with CAT Marine Engines
• Experience with PSPS, CTC Rules, CAT ET, Cadet and CANape
• Experience with Product Link, Panels or Displays
• Proven ability to coach others
• Familiarity with Griffin Production Processes
• Demonstrated ability to coach others on Best Practices (Peers, Factory Personnel, etc)
• Demonstrated ability to resolve manufacturing process defects
• Hands on electrical experience; simple circuit repair, harness construction and re-work, dyno cell point to point troubleshooting
• Mechanical or Electrical Engineering degree or related relevant experience
• Strong Mechanical / Electrical Aptitude
• 8 plus years of relevant work experience
• Proficiency with Caterpillar Engineering systems and processess
• Complete engineering design calculations and analysis
• Prepare, perform and maintain machine test procedures to meet machine standards
• Analyse and interpret data for use in projects and product compliance
• Develop expertise in product safety and worldwide standards and regulations
• Autocad or Pro Engineer Experience is preferred
• Exceptional communications skills both verbal and written in both English and Thai, along with strong analysis skills will assist with your success in this position
• Working alongside other departments will create a team environment for this role
• The candidate will need to demonstrate attention to detail, accuracy and a focus on safety and quality
• A sound knowledge of mobile equipment manufacturing is preferred
• 3 – 10 years of relevant work experience; and
• Design of tooling, components and blister packs using Solid Works
• Following instruction, design engineering projects, in line with customer
• Minimum 3 years Solid Works/3Dmodeling design experience
• Customer focused
• Ability to liaise with customers
• Ability to plan and organize, work to tight deadlines, evaluate in a structured fashion, generate new ideas and problem slove
• Attention to detail and ability to focus on complex tasks
• Continuous improvement
• Ability to travel on behalf of the company
• 5+ years of related experience or MS in Electrical or Computer Engineering with 2 years of related experience
• Must have strong knowledge of logic and/or digital custom circuit design
• Experience with synthesis and place & route CAD tools for high-performance design desirable
• Design plans in coordination with clients' needs and specifications
• Design review process, product integrations, product and process value engineering
• Customer interaction, supply chain & production system design
• Conduct detailed models and 3d drawings
• Source and analyze appropriate components to meet electrical engineering design needs
• Work with the factory team to understand design impacts on manufacturability
• Collaborate and add value through participation in design reviews, providing comments and suggestions on electrical engineering design aspects
• Implementationrchitectural experience in Solaris/AIX, Red Hat Linux, Windows Server, VMWare, Hyper-V, Cisco (LAN/WAN), Storage Area Network (SAN/NAS), Clustering, Volume Management, Filesystems, Disaster Recovery, Application Recovery, database administration (SQL/Oracle), Cloud Computing concepts, Grid computing concepts, Web\Database Farm concepts, atabase applications, Voice Communications, Contact Center Technologies and ERP Application Support
• Domains: Network, Hardware, Infrastructure, Mainframe, Firmware, Contact Center, Voice, Video, Active Directory, Contact Center
• Add additional job-specific preferred qualifications for this position
• Conduct market research to uncover new product categories and opportunities
• Work with Industrial Designers to ideate new product concepts. Turn new concepts into 3D models utilizing Computer Aided Design (CAD)
• Manage design and development of new products from “cradle to grave” from concept into CAD, prototyping, pilot production runs and market launch
• Work closely with other R&D team members and other product stakeholders, including Sales, Marketing, and Operations Teams to define product objectives, develop products and successfully transition products into the market place
• Partner with Asia suppliers on the design and development of new products, processes, and technology
• Actively participate in post-Design product development
• Actively participate in the evaluation and testing of new products
• Pursue patent opportunities for new concepts, ideas, technologies, and products
• 3-5 years experience in design/engineering, preferably in golf
• Previous 3D CAD modeling experience required, preferably with Unigraphics software
• Experience in working with a well-respected, innovative equipment brand preferred
• Ability to travel internationally is required
• Bachelors Degree in science or engineering required
• Experience in golf club manufacturing and understanding of the game is highly desired
• Excellent communication and presentation skills required
• Exceptional follow through and organizational skills
• Ability to effectively manage time and work against business deadlines
• High level of energy, initiative and professionalism
• Innovative and entrepreneurial approaches to business issues
• Executing post-silicon characterization and optimization of power and performance features
• Developing test plans, methodologies and tools to support post-Si activities
• Debugging and troubleshooting system-level issues that may occur in test environments and platforms
• Proactively driving continuous improvement for post-silicon power and performance activities
• Bachelors or Master’s degree in Electronics/Computer Engineering or Computer Science with emphasis on computer architecture and workload analysis
• Ability to program in C, C++, assembly and scripting languages
• Familiarity with x86 and ARM computer architecture
• Experience with software and/or hardware debug tools
• Experience with computer simulations
• Good understanding of PC system architecture, operating systems, drivers, ACPI and BIOS
• Experience with performance/power/thermal measurement and instrumentation
• Pronounced attention to detail
• Configuration Management, Top Down Modeling and Virtual Design Review Audits (VDRA) for 3500/3600 and C175 Caterpillar genset products
• Bachelor’s degree in Mechanical or Electrcal Engineering with 5-10 years of relevant experience
• Strong Mechanical / Electrical aptitude with a demonstrated ability to develop and articulate product concepts
• Proficiency with Caterpillar engineering systems and processes
• Excellent analytical skills and the ability to perform complex assignments
• Demonstrated excellent judgment and decision making ability, demonstrated ability to independently solve problems
• Strong Experience in Teamcenter
• Top Down Modeling experience
• Experience with Pricelist
• Experience with larger, complex assemblies
• Design, Modeling and Detailing of mechanical components and systems for 3500/3600 and C175 genset products
• Bachelor’s degree in Mechanical, Manufacturing or Aerospace Engineering with 5-10 years of relevant experience
• Strong mechanical aptitude with a demonstrated ability to develop and articulate product concepts
• Demonstrated design experience in Pro/Engineer, Creo or similar engineering design/drawing and modeling software
• Demonstrated excellent judgement and decision making ability, demonstrated ability to independently solve problems
• Structural design experience including demonstrated understanding and interpretation of geometric tolerancing, stack up analysis, bolted joint analysis, finite element analysis
• Proficiency with Caterpillar engineering systems, processes and tools
• Bachelor’s degree in Electrical Engineering with 5-10 years of relevant experience
• Proficiency in Caterpillar Engineering Standards, Processes and Systems
• Knowledge of Pro/E (Creo), Creo Schematics or similar tools
• Maintain intimacy with the mountain bike consumer and the competitive landscape
• Design cutting edge mountain bike technologies and industry leading lightweight frames and components using 3D modeling software
• Develop and analyze suspension systems to evaluate performance metrics
• Use computational analysis tools to refine and optimize engineering design to ensure testing success while pushing the boundaries on lightweight design and performance
• Evaluate and tune suspension performance by field testing and data acquisition
• Establish and maintain relationships with key vendors to develop products that meet the project goals, while meeting deadlines
• Maintain familiarity with internal testing protocols and international compliance standards
• Follow internal processes, controls, and company policies as set by company and job function
• Contribute to the success of company by leading or assisting with other projects and tasks as assigned
• Degree in Composite Materials Engineering
• Passion for mountain biking
• Knowledge of lightweight Aluminum materials and structures
• Maintain intimacy with the road bike consumer and the competitive landscape
• Design cutting edge road bike technologies and industry leading lightweight frames and components
• Use computational analysis tools (FEA, CFD, etc.) to refine and optimize engineering design to ensure testing success while pushing the boundaries on lightweight design and performance
• Follow internal controls and company policies as set by company and job function
• Bachelor’s degree in mechanical engineering with a strong grasp of engineering fundamentals
• A minimum of 3 years of related experience in mechanical design
• Knowledge of composite and lightweight alloy materials and structures
• Familiarity of aerodynamic principles and the testing and analysis thereof
• Familiarity of bicycle products and their assembly
• Fluency in 2D and 3D design software including Pro Engineer/Creo
• Understanding of computational analysis methods
• Willingness to travel domestically and internationally
• Familiarity with Road bike market
• Develop front and/or rear suspension components from concept to mass production
• Work with suppliers to ensure that dimensional, structural, and quality standards are met
• Use 3D modeling software (ProEngineer, Creo) to design products and determine the ideal manufacturing process
• Use manual machine tools and test equipment to fabricate, build, and test prototype designs and components, making sure performance criteria are met
• Manage projects that they meet price targets and timelines
• Domestic and international travel required
• Drive a company vehicle for transport of employees and equipment to off-site locations
• Degree in mechanical engineering
• Experience and understanding of hydraulic systems and damper design
• Fluency in 2D and 3D design software including Pro Engineer
• Ability to drive and pass DOT certification
• Generally assigned to create and revise complex components and assemblies. Assignments will include programs with existing and new customers, the introduction of new technology, accelerated development cycles and integrated product lines
• Support Project Engineers by independently (based on minimal input) generating studies and concept sketches for the purpose of understanding, communicating, or overcoming technical issues
• Generates innovative solutions to problems that resolve issues on projects as well as open potential avenues to new products/patents/cost savings
• Can execute complex calculations and develop new techniques for kinematic studies using product standards and individual knowledge
• Expert understanding of dimensioning and tolerancing (GD&T). Able to independently devise dimensioning schemes that suit fit & function of parts while accounting for mating condition to other components in an assembly. Application of complex tolerance stack ups. Consideration for manufacturing and quality assurance capabilities should be evident in the dimensioning strategy and design
• Provides technical leadership/assistance, guidance and mentoring as needed to other Design Engineers/Designers regarding CAD/Drafting best practices and design principles. Can assist in coordinating team based design activities
• Exercise expert knowledge and skill when executing internal CAD change management, and when adapting to customer change management systems, in order to ensure accuracy and proper protocol when submitting math data
• Ensures accurate execution of assignments related to Engineering Change Notices while maintaining proper revision levels and change sequencing
• Drives CAD file management best practices, and individual CAD file data integrity, based on company standards
• Bachelor’s degree (or Bachelor’s equivalency) in Engineering or related field or equivalent combination of education and experience
• Advanced proficiency in currently utilized CAD technology for data file & change management, modeling, assembly, detailing, drafting, GD&T, drawing release and Kinematics
• A minimum of 6 years of experience in computer aided Design & Engineering techniques
• CATIA & UG are preferred, SDRC is a good secondary requirement
• Strong organizational skills and ability to successfully coordinate and complete multiple tasks within and across departments to meet established and changing deadlines
• Ability to manage customers, suppliers, etc. to achieve program deliverables
• Demonstrate successful performance with independent problem solving, presentations and leadership
• Ability to apply academic and other engineering principles in the development of automotive components and utilize math-based tools (e.g. Dimensional management, Kinematics, etc.)
• Support a smooth start-up of 3500 engine and package assembly at CTL for products going into the Oil & Gas, EP and Marine markets through…
• Working with CTL Operations team, 3500 L4 Platform Team (Onsite at CTL), and US based L5 Application & Marketing Teams to ensure the price list structure and BOM are correct
• Refinement and execution of the CTL start-up / phase-In strategy through 2017
• Implementation of MCS & IMO process like ABS, CCS and GL IMO cert
• Host and Interface with EP, Oil & Gas and Marine customers who visit the Tianjin facility
• DTO project management
• Work closely with the local CAT Marketing Groups located in Beijing to gain a better understanding of how our products are applied in Asia (w/ China focus) to identify opportunities of where we can further improve the value we offer to our customers in the products we develop. This would involve frequent customer & dealer visits to obtain a solid understanding of the following.
• What's important to them
• Relationships between End Users, OEM's, Government Agencies, etc
• What our gaps and strengths are
• Competitive threats
• Close collaboration with the US based L5 Application & Marketing Teams so what's learned can be fed back into Product Improvements
• Responsible for participating in the pre-silicon block, chip and system level
• Develop or generate performance verification test vectors based on realistic
• Minimum 2-3 years’ experience in ASIC Design Verification
• Experience in any compute architecture such as x86 or ARM domain based SOC
• Must have excellent knowledge of SOC design & verification flows
• Excellent hands-on debug skills in SOC verification such as assertions, waveforms,
• Must have good communication skills and passion to learn & execute new complex
• Good knowledge of computer architecture
• Strong programming skills (C, C++, Python)
• Knowledge of Operating systems, compilers and data structures
• Changing designs when needed to resolve NPI/CPI issues
• Readiness for builds, including procurement of parts
• Owning component cost and working with suppliers to optimize designs for cost
• Point of contact for all manufacturing issues requiring engineering support
• 1 to 3 years of relevant work experience required
• Takes responsibility for the design concept and design layout using the manual or computer graphics system
• B.E/ B,Tech in Mechanical or Automobile engineering with 3 to 5 years experience in diesel engine/construction engineering field
• Experience in Engine or cooling system design / development and manufacturability concepts of heat exchanger
• Must have strong problem solving skills, a good mechanical and/or electrical/electronic aptitude, and good communications skills
• Exposure in APQP / PPAP
• Exposure in Engine / Cooling system
• To design, develop and test new products for customers worldwide
• To document the engineering aspects of new products and the detailed recording of them
• To support production issues and queries that involves product design or improvements. Involves sustaining support of existing products
• Responsible for product modifications, according to customer and internally driven requests
• Conception of new products based on customer and marketing requirements
• Carries out product design as part of a multi-functional team
• Responsible for the production of CAD models & component drawings to production departments
• Carries out problem analysis using a variety of techniques, with the assistance of the team, and makes recommendations
• Analysis of designs using DFMEA, FEA and Tolerance Analysis skills
• Assist in the testing of the components in conjunction with test lab personnel
• Customer support and project visits when required
• The Design Engineer has the authority to decide the basic product design to meet the customers product requirement needs with the support of the design team
• Lead the design review process. When projects are won the design engineer is deeply involved in detailing and finalising the design based upon the customers and Molex needs
• Numeric metrics that the position is accountable for are
• Meeting Project Schedules & budgeted project hours
• Design related non-conformances
• Following the required Quality and work procedures within Molex
• Ensuring that the NPD checklist is complete for engineering actions
• Product Development Request is different with different problems, techniques and solutions needed
• The position requires a significant ability to research new product market standards and norms
• Innovation in the approach to design and problem solving is encouraged
• Degree in Mechanical Engineering or similar engineering discipline
• Minimum 3 years industrial experience in a similar role and environment
• Understands and applies fundamental engineering concepts, practices and procedures
• Familiar with high volume production and assembly processes and their impact on product design
• Fully proficient in all aspects of CAD systems, DFMEA, FEA procedures
• Fundamental understanding of plastic moulding, metal stamping and electroplating technologies
• Thorough knowledge of drawing layouts and dimensioning in accordance with engineering requirements
• Understands the importance of document control and engineering data administration
• Thorough knowledge of engineering materials
• An analytical capability which lends itself to problem solving
• Perform basic schematic design and PCB layout
• Partner with more experienced Design Engineers to effectively complete design projects
• May be responsible for planning own technical work
• Learns how to use and apply engineering tools relevant for performing the essential functions of this job description
• Bachelor of Science in Electrical Engineering or Computer Engineering (BSEE, BSCE) from a four-year college or university, OR an equivalent combination of education and experience
• Solid understanding of transistor level fundamentals especially the switching characteristics of transistors and inverters
• Different regions/modes of operation of CMOS devices, sizing of basic CMOS gates and realization of logic using transistors
• Strong understanding of static timing analysis (setup/hold) in digital circuits
• Hands-on experience in transistor level simulations, preferably spice/spectre simulations
• Experience in custom clock tree networks and clock divider circuits is a plus
• In depth understanding of verification flows and methodologies
• Having exposure of working in US for few years will be added positive
• Ability to technically guide team of 5-6 junior engineers and track performance
• Good processor architecture background
• Maintain intimacy with mountain, road, urban, and ebike bike consumer and the competitive landscape
• Design cutting industry leading lightweight components and wheels using 3D modeling software
• Support and follow engineering best practices, as well as establish new best practices as needed
• Employ the use of lightweight alloy and composite materials and manufacturing processes in applications pertaining to bicycle component and wheel design
• Perform research as needed to support new, innovative designs and/or processes
• Passion for cycling
• Complete Engine Component projects for internal and purchase finished component projects
• Initiate additional Engine component salvage development and validation at suppliers and in the Corinth and Prentiss facilities of Reman
• Provide technical support to the Reman plants on build and test issues
• Maintain and release Reman offerings, drawings/prints
• Work closely with internal business partners such as LPSD and Remanufacturing facilities throughout the world
• Travel of 20-25% may be required
• 4-Year Engineering degree and 2-4 years of related Engine experience
• Engine Component Design experience
• 2+ years of project and problem solving experience in product related projects using 6 sigma and other problem identification and resolution tools
• Possess excellent analytical and communication skills
• Must be a self starter, accountable, and customer driven with strong teamwork,
• Have a good understanding of diesel engine assembly and legacy product
• Have a good understanding and experiences NPI process
• High level of proficiency in data analysis/analytics and tools. (Excel, Access, etc.)
• Individuals should possess an above average level of Engines performance and engine components
• Candidates should be able to lead, monitor, and manage projects
• The candidate must be promotable and mobile with strong interpersonal and leadership skills, must also possess strong communication skills and business acumen
• Conceives and provides practical product design applications using complex technical principles
• Prepares concept, design, and development and feasibility studies of complex engineering projects
• Prepares development plans and is responsible for meeting scheduled dates
• Acts as the development team leader by interacting with production plant
• Conducts technical evaluations of major systems on competitive products
• Coordinates product test with proven design and prototype build up and test areas
• Provides guidance to other engineers responsible for portions of the product project to ensure development schedules are met
• Evaluates, defines, and resolves design and manufacturing problems
• Travels to foreign and/ or domestic plants, dealerships and customer job sites to solve design problems or to field-test locations to evaluate a product improvement
• Uses technical expertise and product knowledge to play the leadership role in the problem resolution process when interfacing with Test and Evaluation, Service, Plant personnel, suppliers and consultants
• Works with manufacturability teams resolving problems with manufacturing and statistical process controls
• Accredited Electrical Engineering degree with 7-10 years in progressive engineering assignments to gain a mastery of complex engineering and manufacturability concepts
• Must have a good technical aptitude with ability to develop product concepts
• Must have working knowledge of medium and high voltage AC generators/ generator set packages
• Should be proficient in designing electrical circuits using Autocad
• Proficiency in Pro-E / Pro-Harness
• Working knowledge of SAP
• AC generator/ generator set sizing
• 7 - 10 years engineering experience with network, end-point, hosting or security infrastructure domain technology
• Bachelor’s degree in Computer Science, Engineering or related field
• Implementation/architectural experience with security infrastructure tools. Specific tool experience with all Fireeye products, HP Arcsight, Symantec DLP/SEP, Zscaler, PaloAlto, Bit9 and CarboBlack
• Minimum 3+ years’ experience in DFT Design Verification
• Strong knowledge of DFT methodologies, tools and flows
• Strong Verilog, System Verilog, Perl/shell script programming skills
• Understanding of test compression and ATE debug is a plus
• DFT architecture experience is a plus
• Need to have strong basics of digital design, DFT
• Good conceptual knowledge of DFT, Scan
• Understand ATPG failures, DRCs, Chain trace issues
• Need to be able to understand, Debug and Fix gate level Pattern simulation issues, both No-Timing and Timing simulations
• Understand fault models, various trends in newer fault models, etc
• Experience in Scan Insertion, understanding of various DFT Architectures and DFT Clocking
• Knowledge of Boundary scan, interface specifications like JTAG, IEEE1500, etc preferred
• Knowledge of DFT Timing constraints, working knowledge of Design, PD issues will be an added advantage
• Hands on experience in Mentor tool will be preferred. Knowledge of Synopsys tool/other tools will be an added advantage
• Working knowledge of PERL or other scripting languages will be an added advantage
• Conceives and provides practical product design applications using complex technical
• Engineering degree, or previous equivalent experience within Engineering
• Progressive experience within engineering roles to gain a mastery of complex engineering and
• High Level of proficiency in Pro E or other CAD modelling or simulation tools
• An understanding of diesel / gas engine fundamental principles
• Previous diesel / gas engine component and system design experience
• Collect performance data on AMD and competitive platforms
• Identify performance bottlenecks in current designs
• Estimate and optimize performance on future designs
• Develop and maintain tools and scripts used for data collection and analysis
• Collect instruction traces and perform correlation for CPU centric workloads
• Set up and maintain lab platforms, workloads and tools
• Execute architectural trade-off studies using internal simulators and silicon studies
• Support system modeling and correlation efforts for client workloads
• Bachelor’s degree in Electronics/Computer Engineering or Computer Science with emphasis on computer architecture
• Experience with RTL simulation
• Experience with PC workloads analysis and benchmarking
• Microarchitecture knowledge of a CPU, GPU, DSP, multimedia co-processor, I/O subsystem, and/or DRAM controller
• Prior industry (full-time or intern/co-op) experience in any of these areas is a BIG plus
• Participate in SOC full Chip DFT feature and architecture definition
• Implement SOC DFT functions including SCAN, Boundary SCAN, MBIST, Analog Macro test logic
• Perform verification on all DFT structures
• BS in EE & CS
• Knowledge in ASIC design methodologies and DFT techniques such as JTAG/IEEE standards, scan and ATPG, on-chip test pattern compression and at-speed testing using PLL, memory BIST and repair, logic BIST, power-gating, on-chip debug logic
• Hands on working experience on ASIC DFT design and verification
• Experience with micro processor design a big plus
• Should have strong problem solving skills
• Power management and Power Gating (PG) verification
• Specifying or reviewing verification plans for complex blocks within the ASIC
• Experience in random test generation, coverage analysis, failure debug
• Assists Engineering Management to coordinate the timely delivery of product design and customer proposal requests
• Conceptualizes and prepares preliminary and final detail design and documentation of systems components and assemblies
• Uses strong analytical skills to proactively assess and predict design performance prior to test
• Supports testing including the design and release of test fixtures
• Supports Bid and Proposal activities by creating a conceptual design and documenting in a Technical Response
• Debugging and verifying block-/chip-level DFT/DFX features in a large ASIC design
• Porting or creating the DFT/DFX verification environment
• Block/chip test plan creation and development
• Stimulus writing and debug, and regression cleanup
• Graduate students in MSEE in Elec.Eng or Comp.Eng
• 2 years related work experience is preferred
• C++, Perl/Shell scripting language is a must
• Experience with Verilog design and simulation is preferred
• Knowledge of design verification methodologies
• Understanding and knowledge of Design For Test (DFT/DFX) methodologies and verification experience is preferred (eg. IEEE1500, JTAG 1149.x, scan, memory BIST, … etc)
• Can work independently and team player
• Develop and execute feature enablement and test plans for system and power management IP
• Writing firmware for embedded u-controllers in C
• Develop test automation infrastructure and scripts
• Proactively driving continuous improvement in all areas of activity
• Implement and maintain power management firmware
• Implement and maintain infrastructure for various features and provide methods for optimizing and testing
• Define and document software interfaces (operating system, drivers, tools, etc.)
• Collaborate on reviewing existing architectural solutions and working towards more efficient future implementations
• Knowledge of C/C++ programming on embedded micro-controllers with following specifics
• Ability to develop code based on the spec
• Understanding overall firmware architecture
• Ability to recognize faulty scenarios and properly cover them
• Knowledge of real time OS techniques
• Knowledge of processor and micro-controller architecture
• Instruction fetching and execution
• Interrupts – ISRs and handling
• Must be a self-starter, self-motivated and able to independently drive tasks to completion
• Design, simulate and generate model based software for implement sub-systems on Caterpillar machines. Software is developed using MATLAB and Simulink in an Agile SW development environment. Work in conjunction with systems engineers to define, design, implement, calibrate, simulate, and test implement features on Caterpillar machines
• Uses technical expertise and product knowledge to play the leadership role in the problem resolution process when interfacing with Test and Evaluation, Service, suppliers and consultants
• Bachelor's degree in Engineering, Engineering Technology, Mechatronics, or Computer Science
• Experience in developing control software for embedded systems
• Ability to troubleshoot SW and SW Tools
• Strong communications skills (verbal & presentation)
• Experience developing model based embedded SW for the off highway or automotive industry using Matlab and Simulink development tools
• Independently perform moderately difficult assignments in the design, detailed configuration, integration and upgrade of existing and future technologies within technical area of expertise. Plan, design, review and approve robust, stable, scalable and manageable designs. Perform problem diagnosis, initiate problem resolution and provide top tier, ongoing life-cycle support for new technology deployments and upgrades
• Manage effective relationships and work in partnership with leadership, team members, vendors, and contractors to deliver robust technical solutions, ensuring that service level commitments and project time lines are maintained. Provide technical expertise, leadership, direction and prioritization of work to team members ensuring successful project implementation and outstanding service delivery
• Recommend, deploy and document design strategies and solutions for engineering problems based on comprehensive and thoughtful analysis of business goals, objectives and existing technologies
• Provide technical support for the IBM suite of Rational tools, which includes RPP code repository for all Mainframe business applications. This also includes ongoing technical support for Pactables which is used within our business applications
• Provide technical support for the use of Pacbase repository (legacy code) by the application teams
• Manage and coordination of Mainframe Quality Assurance. Work with applications to ensure that all relevant enhancements are thoroughly tested for infrastructure impacts
• Develop and execute test cases for all major subsystem upgrades, maintenance and hardware refresh. (CICS, MQ, Coupling Facility, Storage, Jobtrac, Jobscan, Production load libraries, Changeman, VTAM, JES and Development tools)
• Provide technical support for the additional mainframe tools utilized by developers. Tools include CICS,IMS,TSO/ISPF, Business Task Manager (BTM) Framework, High Speed Lookup (HSL) Framework, MQ Series, Compuware Suite (Xpediter, File-Aid, etc.) Computer Associates Suite (Jobtrac, Panvalet, etc.) Changeman, WSAD, Eclipse IDE, PS Framework, BS Framework, J2EE, JSP
• Interface between outsourcing vendor and Ameriprise for mainframe system software/hardware maintenance, support and upgrades
• Develop analytical reporting as necessary to highlight mainframe issues and opportunities
• Provide technical support to application teams as needed
• Manage and support application development environment
• Participate in 24/7 oncall rotation for Mainframe Services
• Manage assigned incidents (issue review, remediation, scheduling, change execution, etc.)
• Address chronic incidents and problems (long lasting, repeated incidents, etc.)
• As a passionate and dedicated Performance team member of Server performance team, you will participate in next generation SoC/IP micro-architecture feature exploration, modeling and analysis for various markets. Your daily activities include
• Micro-benchmarking, Analyzing and tracing various benchmarks, workload characterization , competitive analysis on various hardware platforms, identify bottlenecks and propose feedback solution for performance improvement
• Develop tools and methodology for workloads analysis
• Communicating, proposing, and implementing solutions to issues
• Very good understanding of CPU, GPU and computer system architecture
• Strong programming skills (C, C++, Python, X86 assembly)
• Meticulous attention to details
• Working experience of UNIX/Linux operating systems
• Defining and executing the overall functional test plan and verification strategy for a set of AMD IP
• Driving technical innovation to enhance AMD’s capabilities in IP validation/verification, including tool and script development, technical and procedural methodology enhancement, and various internal and cross-functional technical initiatives
• Debug of IP issues found during pre-silicon, bringup, validation, and production phases of SOC programs
• Working closely with supporting teams in design, diagnostics, emulation, firmware, and driver to ensure readiness for first silicon arrival, enablement of IP functionality, and debug of critical features
• Engaging on pre-silicon verification efforts, including but not limited to FPGA-based emulation, Design Verification (DV), and other software/hardware modeling frameworks
• Leading collaborative technical discussions to drive resolution on technical issues and roll out technical initiatives
• Developing knowledge of system architecture/debug and other IP’s
• Supporting issues on customer platforms as requested by customer support teams
• 1 to 5 years experience in digital logic/platform design, verification, or post-silicon verification
• Strong programming/scripting skills (eg. C/C++, Perl, Ruby, Python)
• Extensive experience with ASIC debug techniques and methodologies
• Extensive experience with common lab equipment, including protocol/logic analyzers, oscilloscopes, etc
• Extensive experience with board/platform-level debug, including clock/power delivery, sequencing, analysis, and optimization
• Extensive knowledge of physical and protocol levels of common high speed interfaces an asset
• In-depth knowledge of PC architectures an asset
• Bachelors or Masters Degree in Electrical or Computer Engineering
• Must have excellent written and verbal communication skills
• Must excel in a dynamic team working environment
• Ability to be flexible in terms of responsibilities
• Performs design calculations and participates in design decisions - cooling products
• Along with the supporting technical team, provides technical leadership to Manufacturing, Quality, Purchasing, Service and other areas
• Maintains close communications with suppliers, product assembly plants and Test Engineers during product buildup and testing
• Engineering degree, or equivalent experience, and 3-5 years in diesel engine/construction engineering field
• Experience in Engine or cooling system design & development is desirable
• Skills in product development - component / system, product design & Analysis
• Must have strong problem solving skills, analytical skills and good communications skills
• High level of proficiency in Pro/E
• Cooling system sizing simulation Experience
• Project Management / APQP / PPAP
• Creates value optimised concepts and directs the design and development of complex engineering projects
• Prepares concept, design and development and feasibility studies of complex engineering projects through value centred design principles
• Prepares and leads DFMEA documentation and risk mitigation activities
• Responsible for adhering to key milestones against agreed project and work plans
• Acts as the project design lead by interacting with manufacturing plant locations and internal / external cross functional teams
• Provides guidance to other engineers responsible for portions of the product and project to ensure design schedules are met
• Progressive experience within engineering roles to gain a mastery of complex engineering and manufacturability concepts
• Previous experience in a Design role with a High Level of proficiency in Pro E or other CAD modelling or simulation tools
• Previous experience in value optimisation
• Design ejection seat products or subcomponents utilizing Unigraphics/NX 8.5 CAD system and Team Center Product Lifecycle Management Software
• Works as the liaison between COS Design Engineering and GEC-I Engineering on technical design tasks
• Works as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to develop various aircraft seating products
• Reviews requirements and evaluates new product design and functionality in support of meeting customer requirements and successful certification efforts
• Interacts with Marketing to ensure customer satisfaction
• May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our track for our HMTF testing
• Strong analytical and customer service abilities required. - Ability to communicate and articulate technical information across various organizational levels
• Implementationrchitectural experience in Solaris/AIX, Red Hat Linux, Windows Server, VMWare, Hyper-V, Cisco (LAN/WAN), Storage Area Network (SAN/NAS), Clustering, Volume Management, Filesystems, Disaster Recovery, Application Recovery, some database administration (SQL/Oracle), Cloud Computing security infrastructure concepts,
• Domains: Network, Hardware, Infrastructure, Mainframe, Firmware, Active Directory
• As a passionate and dedicated Performance team member of Server performance Engineer team, you will participate in next generation system and IP architecture exploration, modeling and analysis for Server, Client and Graphics markets. Your daily activities include
• Working closely with other team members to understand design architecture and to propose solution to improve/enhance performance with given IP and markets
• Micro-benchmarking, Analyzing and tracing various client/server benchmarks, workload characterization , competitive analysis on various hardware platforms, identify bottlenecks and propose feedback solution for performance improvement
• Master or PhD degree emphasis in Electrical Engineering, Computer architecture, or Computer Science with 2 plus years of verification experience
• Work with Shrewsbury product engineers and customer engineering functions to understand application requirements
• Use application requirements to develop preliminary high level concept layouts within Creo CAD modelling software
• Presenting concepts both internally and externally
• Creating concept study reports
• Work with Shrewsbury NPI project management team to develop powerpack cost and timing plans
• Support liaison with component and subsystem suppliers during powerpack concept development
• Liaise with engineering teams within Caterpillar to drive commonality of powerpack design
• Develop preliminary high level concepts to an interface controlled layout
• Work with UK and US engineering teams to allow the powerpack design to move into detail design phase
• A background in either engine, transmission, driveline design or vehicle power unit installation
• Previous experience in a design engineer role, including concept layouts
• A demonstrable understanding of the interaction engine, transmission and relevant subsystems, including: Cooling, Air filtration, Hydraulic systems, Electrical power generation system or Auxiliary drives
• Understanding of the interaction of driveline systems to vehicle requirements
• Working knowledge of 3D CAD software, preferably PTC Creo
• Worked as part of a multi-disciplinary engineering teams and customers
• Good communication skills with the ability to build relationships
• Coursework in acoustic and audio design
• Proficiency with schematic and PCB design
• Demonstrated strong and effective verbal, written and interpersonal communication skills
• Experience in the design, development and troubleshooting loudspeaker systems
• Hands-on experience designing and testing acoustic equipment or systems
• Knowledge of acoustic and audio testing
• 5+ years of experience and proven engineering expertise in designing, implementing, and supporting Microsoft Skype for Business (SFB) and Lync 2013
• Experience supporting SFB high-availability, disaster recovery, resilient, high-performing solutions with a focus on instant messaging, audio/video/web conferencing,desktop video and application sharing
• Ability to identify and drive best practices for SFB use at an enterprise level
• The following SFB experience
• Financial Services industry specific knowledge that includes a working knowledge of industry standards
• Independent, self-motivated
• Ability to work with non-technical business users as well as technical team members
• Incident, change, and problem management with ServiceNow
• Technical Certifications: MCSE: Communication
• Responsible for SCAN, MBIST and JTAG implementation and verification
• Responsible for SCAN insertion and DRC analysis/debug
• Responsible for SCAN, MBIST and JTAG gate-level simulations
• Job Requirements and Skills
• Minimum 4+ years’ experience in DFT Design Verification
• BS with 3 years of industry experience or Masters in Electrical/Electronics/Computer Sciences with focus on Logical Design, Computer Architecture
• Experience with, or knowledge of, verification environment for custom integrated circuits. Experience may be gained as a part of educational curriculum or concurrently on the job
• Work well with others in a team environment
• Experience with DFT integration, logic design flow, modeling, RTL-implementation, Synthesis, Logic Equivalence checks
• Experience with Synopsys MBIST insertion and verification
• Experience with ATPG vector generation, simulation and qualification
• Proficiency with Industry Standard tool for Scan, ATPG, & MBIST, Programming/Scripting in Perl, Tcl, & Make is desired
• DFT IP/RTL edits and integration to support Scan and BIST testing
• Simulating and verifying the ATPG patterns
• Developing, enhancing and maintaining scripts and documentation as necessary
• Support Test Engineering team in the development of required capability for future validation activity
• Development/design, implementation and initial application of robust systems for static and dynamic testing of vehicles and their subsystems. This can include hydraulic systems (i.e. closed loop force controlled hydraulic ram), electro-mechanical systems (i.e. dynamic deceleration sleds to simulate the forces of a crash), pneumatic systems (i.e. multi-sample actuation device) and static structures (i.e. barriers or restraints to secure test samples)
• Improve current test suites and setups for reliability and ease of use
• Support Test Engineering team in root cause and problem resolution activities on test equipment issues found during tests as required
• Provide technical guidance and mentorship to less experienced engineers in the area of test equipment design and validation best practices
• Create and develop Body-in-White component and system requirements and specifications to achieve best-in-class structural, NVH and crash performance
• Develop design concepts and production designs in CATIA V5 or V6
• Optimize the concepts and designs with analytical and physical assessments, ensuring conformation to federal regulations governing assigned systems
• Deliver world-class craftsmanship and fit/finish
• Interface with suppliers for manufacturing feasibility, validation, and other engineering activities as specified for the assigned commodity. Note that in most cases, Tesla Vehicle Engineering will design commodities in-house
• Create (with component/system supplier) component and subsystem design verification plans and test methods
• Support vehicle milestones, build events, and launch the product successfully
• Be an integral part of the team tasked with the development process from concept generation through to design verification
• Apply new and existing technologies to provide the optimum delivery system design
• Provide technical feedback during frequent technical contact with customers to optimise product design
• Support the maintenance of product files and other relevant documentation to comply with quality standards
• Assist in the development of intellectual property generated by development activities
• Develop, design, prototype build, and design verification of low/medium voltage NEMA Motor Control Center (MCC) equipment through new product development or product modification activities,
• Develop mechanical components, systems and/or technologies for low/medium voltage motor control equipment and identify opportunities to improve existing products,
• Ensure appropriate documentation (layout/ design assy /2D drawings / BoMs),
• Ensure expected results in terms of quality, execution time, and cost (within control),
• Use of design tools (like 2D / 3D CAD (AC / Creo), Excel, and in-house design calculations),
• Develop new products or improvements / modifications to existing products, including product concept, design documentation, as well as testing of the design in the laboratory,
• Assure all part designs meet requirements including time-to-market and product target cost,
• Create definitions of parts, modules, and assemblies in the form of 2D drawings, 3D models, tolerance stack-ups, and other data to support analysis, manufacturing, assembly, tooling, and inspection,
• Create CAD models in a linked model environment using Creo, as well as check, validate, and issue Creo associated drawings,
• Work as part of a cross functional team including manufacturing, sourcing, global engineering, and systems engineering in developing and on-going support of state of the art for MCC Equipment,
• Manage resolution of technical issues including root cause analysis
• Bachelor's degree in Mechanical or Electrical Engineering (or equivalent in knowledge/experience),
• Polish and English language,
• Proven experience as design engineer,
• CAD experience with Creo or other 3D CAD software,
• Change management experience (Windchill or other),
• Demonstrated ability to meet schedules in product design,
• Working knowledge with MS Office,
• Excellent analytical skills and ability to work within a project team environment
• Expertise evaluating and resolving thermal, short circuit, arcing fault, structural/seismic design issues in MCC/Switchgear product lines,
• Familiar with agency requirements for IEC, NEMA MCC/Switchgear - UL, cUL and the process by which products are certified,
• Working knowledge of NPI (New Product Introduction), Change Management ), Design For Six-Sigma, and Design For Reliability processes,
• Experience and practice in using LEAN practices and tools,
• Edison Engineering Development Program (EEDP) graduate,
• Ability to identify, quantify, and resolve technical problems,
• Ability to work under pressure and meet project schedules,
• Ability to design, develop, analyze and document product designs which meet the functional, cost, reliability, manufacturability, and safety requirements of the customer or market,
• Strong team builder and team player with the demonstrated ability to work in a cross-functional, global, environment,
• Demonstrated initiative, drive, leadership, communication, and interpersonal skills
• Prepare and present technical data to internal and external customers
• Participate on teams assigned to address specific organizational initiatives
• Share engineering information and promote open dialogue
• Lead and coordinate design activities, establish functional and new drafting processes and product standardization templates, system / product definition, drawings, specifications, and BoMs using specific or establishing new design tool
• Independently perform most design assignments
• Assign contracts to designer and regulate workload leveling for the drawing fulfillment
• Coordinate drawing checking methods and monitor designer checking schedules
• Responsible for the technical development of part of a job (quality/ cost out/ feature enhancements) or part of a new project (NPI)
• Ensure appropriate documentation (layout, spec, design assy / stack-up / specification studies, BoMs)
• Interface with PE or Program Manager, DE, Testing, Sourcing, Quality and Manufacturing and interface with component / system vendors
• Coordinate and control the activities performed by external resources related to the assigned job
• Ensure expected results in term of quality, execution time, and cost (within control)
• Use of design tools (like 2D / 3D CAD (AC / ProE ), Excel, and in-house design calculations)
• Bachelor’s degree from an accredited university or college with at least 3 years experience as a designer
• Bachelor’s degree in Mechanical or Electrical Engineering is preferred
• Prior experience as a Designer with full projects successfully completed is preferred
• Experience in related electronics design is a major plus
• Musical background is a plus
• Knowledge of CAD tools such as PCB layout software, schematic capture software, circuit simulation software, etc. to expedite and improve product designs
• An analog electronics background is preferred with a basic knowledge of general linear & non-linear amplifying device characteristics
• Design, analysis and debugging skills sufficient to design (with supervision) signal processing, amplifying, & power circuits for musical instruments products
• Proficiency with basic electronics test equipment & basic digital design skills expected
• Mechanical drafting, analysis, & documentation skills are a plus
• Ability to construct electronic circuits using basic tools
• Good technical and non-technical communications skills. Proficiency in written communication for business. Spanish language skills are a plus
• Strong proficiency with Excel and Word
• Basic project planning skills are highly sought
• Responsible for the design, development, test & evaluation of product projects assigned
• Direct activities on projects assigned to assure timely achievement of design, performance, cost, schedule & documentation requirements
• Design engineering test equipment and methods as assigned
• Responsible for technical content of product literature for products designed
• B.S. in Mechanical Engineering or similar engineering major
• More than four years of post-graduate experience working in a product-oriented engineering environment
• Works on many phases or sub-tasks of a project of moderate complexity
• Plans projects or subtasks so they may be tracked and presented
• Leads technical staff and/or junior engineers
• Exercises considerable latitude and technical judgment in deciding work methods
• Proven ability to design for manufacturability
• Demonstrated knowledge of part design using multiple manufacturing processes, including: Aluminum Die Casting, Injection Molding, Machining, Sheet Metal
• Bachelor degree in Mechanical, Electrical Engineering or related technical field
• 5 years of experience
• HVAC or fire / security control systems
• Development of graphics, hardware, software
• Estimating through commissioning of a project
• 3 years of experience with AutoCAD or equivalent tool, Microsoft Excel and project
• 5 years of experience estimating, selling and project implementation
• 5 years fire/security systems engineering
• Extensive knowledge of PCs, software, networks, Internet related technologies
• Experience with documentation such as reports, submittals and drawings
• Ability to understand customer requirements/restraints and offer a cost-effective solution to the service needs
• Ability to engineer small projects by completed hardware installation drawings, application software and graphics as required
• Create accurate and complete estimates
• Effectively communicate compelling features and benefits of the solutions and services to sales team and customers
• Professionally communicate in writing and verbally to account team, proposal team management and customers
• Must have the ability to multi task and produce desired results in a deadline driven environment
• Work effectively and efficiently in a team environment. Work with field Technicians, Solution Design Center and Field Engineers as needed to improve efficiency and support Project Managers as needed. Prepare job drawings is required to meet deadlines
• 2-5 years of product development experience required
• 2-5 years of design engineering experience using CAD required (Creo preferred)
• Demonstrates CAD modeling experience (Creo preferred )
• Demonstrates exceptional critical thinking and problem solving skills
• Demonstrates hands on prototyping/design validation model building
• Demonstrates ability to handle multiple tasks and assignments simultaneously
• Plastic injection molding part design
• Plastic injection tooling and processing knowledge
• Basic sheet metal design experience
• Consumer electronics product development
• Basic level of electronics/mechatronics knowledge advantageous
• Basic materials properties for plastics and metals
• Understanding of manufacturing process and their limitations
• Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, and all regulatory requirements
• Perform engineering and technical tasks as assigned by supervision
• Support engineering work functions
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures
• Recommend format and methodology improvements to standard processes and procedures
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications
• Adhere to specific instructions provided by Design Product Lead
• Use basic design request platform ( SalesForce ) operation
• Use PV Specific Design Tools basic operations ( PV Home, PV Fast, PV SIM, Design Calculators, Google Earth, Pictometry and others )
• Apply complete solar design guidelines specific to a particular product assigned
• Perform actual design tasks specific to a solar product assigned to include the following
• Client Files Extraction ( Cad Files, Excel Files , Pdf references and others )
• Solar array layout
• Solar shading analysis
• Electrical three-Line diagram
• Incorporation of standard structural details
• Review completed work for accuracy, and quality prior to submission
• Perform standard drawing tasks and procedures to include the following
• Create design drawings using basic AutoCadd ( 2009, 2010 version )
• Compile to sheet sets
• Plot to PDF all final drawings
• Send to Printer ( for Permit Packs ) operation
• Save to shared drives as instructed
• Revise drawings per reviewers comments ( as required )
• Handle medium scale solar design projects
• Participate in regular design team meetings as required
• Must have the ability to work independently with minimal supervision
• Experience with Microsoft Office (Word, Excel, Outlook and PowerPoint) is required
• Development of test programs - You will of course have an extensive introduction to our programming tool
• Ensure that our test equipment executes the tests safely by complying to internal and external standards
• Ensure that the program you develop integrates safely with the deliveries from other stakeholders in the projects
• Ensure that the equipment we deliver fulfills internal and external legislation, standards and guidelines
• Commissioning of test equipment at our factories world wide
• Provide on-site education of the end users of our equipment
• Ensure that the equipment is handed over to the costumer according to our processes
• Ensure documentation and Quality assurance of the test equipment
• Preparation of mechanical HVAC reports and drawings to ensure quality of output
• Provide high level technical expertise when applying mechanical HVAC engineering principles, techniques and methods to the planning and design of building services projects
• Ensure all quality and environmental aspects of the project are identified and addressed to maintain effective operation and project delivery
• Preparation of Revit Models, as required
• Supervision of Revit team
• Bachelor of Mechanical Engineering
• The Design Engineer – Land Works- Mechanical, Electrical, Plumbing (DE-MEP) is responsible for
• Reporting to the Design Manager regarding the overall progress of the design and issues and opportunities related to design
• Assisting with tendering for land works design-build contracts. Some or all of the works may be tendered as design-build (FIDIC Yellow Book) contracts. Specifically, the DE-MEP assists the commercial/contracts team with preparation of tender documents and evaluation of tenders from technical design and construction viewpoints
• Managing the services consultant and/or contractors’ designers under Design-Build contracts in accordance with their contracts with the Employer
• Coordinating the work of design reviewers from within AECOM and from Employer/stakeholder organisations. Specifically, the DE-MEP distributes the documents to appropriate parties, obtains comments from the reviewers, vets comments for appropriateness and clarity, and routes the comments back to the designer. The scope of the AECOM design reviews and audits consists of checks that the Employer’s mandatory requirements have been incorporated, that the documents have been checked according to the Consultant’s or Contractor’s approved Quality system, and by the ICE where required
• Reviewing project agreements/contracts/sub contracts and understanding the design services requirements and AECOM’s role as the Project Management Consultant (PMC)
• Supporting the Design Engineer-Buildings with regard to MEP aspects of the building works. Working as a team with the DE-Buildings and DE-Civil
• Assisting the PMC Interface Manager to ensure that design and construction interfaces between the infrastructure packages and the marine works and buildings packages are properly addressed
• Assisting the Interface Manager with regard to any issues with incoming utility supplies
• Confirming that safety in design processes are implemented in all design services
• Leading design constructability assessments and value engineering assessments
• Design of infrastructure (utility networks) and building services
• Design consultancy or design-build contract administration
• Value engineering workshop facilitation skills
• Design constructability workshop facilitation skills
• Risk identification, assessment and mitigation skills
• Implementation of Safety in Design procedures
• Bachelor’s degree in Mechanical / Electrical Engineering
• Member of professional organisation – Mechanical / Electrical Engineering
• The DE-Buildings is responsible for
• Reporting to the Design Manager regarding the overall progress of the design, and issues and opportunities related to design
• Supporting the contracts management discipline during tendering of the design consultancy contract (FIDIC White Book). The DE-Buildings assists the commercial/contracts team with preparation of the scope of services; programme of the services; payment schedule; tender schedules and tender evaluation criteria
• Overseeing the work of the design consultant including administration of the contract between the Employer and the consultant
• Coordinating the work of design reviewers from within the Project Management Consultant (PMC-AECOM) and from Employer/stakeholder organisations. Specifically, the DE-Buildings distributes the documents to appropriate parties, obtains comments from the reviewers, vets comments for appropriateness and clarity, and routes the comments back to the design consultant. The scope of the PMC design reviews and audits consists of checks that the Employer’s mandatory requirements have been incorporated, that the documents have been checked according to the Consultant’s approved Quality system, and by the Independent Checking Engineer (ICE) where required
• Supporting the commercial/contracts team during tendering of the construction contract (FIDIC Red Book). The DE-Buildings assists the commercial/contracts team with assembling the contract documents from the documents received from the design consultant
• Reviewing project agreements/contracts/sub contracts and understanding the design services requirements and AECOM’s role as the PMC
• Working as a team with the DE-Civil and DE-MEP
• The DE-Buildings also supports the project controls team and commercial team in the following services
• Baseline, current and forecast schedule position
• Document control and information management
• Risk analysis both quantitative and qualitative including schedule and cost probability analysis
• Preparing reports for use by project-level and senior management
• Change and variation control
• Schedule delay analysis
• Defining complex project changes
• Management of the design of buildings including warehouses, office blocks and substations
• The DE-Civil is responsible for
• Assisting with tendering for land works design-build contracts. Some or all of the works may be tendered as design-build (FIDIC Yellow Book) contracts. Specifically, the DE-Civil assists the commercial/contracts team with preparation of tender documents and evaluation of tenders from technical design and construction viewpoints
• Coordinating the work of design reviewers from within the Project Management Consultant (PMC-AECOM) and from Employer/stakeholder organisations. Specifically, the DE-Civil distributes the documents to appropriate parties, obtains comments from the reviewers, vets comments for appropriateness and clarity, and routes the comments back to the designer. The scope of the PMC design reviews and audits consists of checks that the Employer’s mandatory requirements have been incorporated, that the documents have been checked according to the Consultant’s or Contractor’s approved Quality system, and by the ICE where required
• Reviewing project agreements/contracts/sub-contracts and understanding the design services requirements and AECOM’s role as the Project Management Consultant (PMC)
• Supporting the Design Engineer-Buildings with regard to civil aspects of the building works. Working as a team with the DE Buildings and DE-MEP
• The DE-Civil also supports the project controls team and commercial team in the following services
• Schedule Delay analysis
• Bachelors Degree in Mechanical Engineering preferred
• 3-5 years experience in engineering/manufacturing positions
• Aerospace experience a plus
• Knowledge of design principles, manufacturing process and assembly techniques
• Use of computer 3D solid modeling system - strong preference for Unigraphics NX
• Application of standard drafting practices including MIL-STD-100 and ANSI Y14.5
• Ability to communicate subject matter in the mechanical engineering environment with customers, vendors and internal personnel
• Ensure designs are completed in accordance with CDM Regulations Ensure a safe working environment for all staff Produce design documents which are cost effective, meet the requirements of the specification and which can be purchased, installed and commissioned effectively. Ensure that standard designs and design practices are utilised wherever possible. Agree the design cost budget and monitor performance against the budget and provide forecast costs to completion for individual projects Record, monitor and control design changes in order to maximise cost efficiency. Organising the work required and documenting it in the Design Management Plan Delivering the design stage outputs of each project within the agreed timescale and budget Coordinating design outputs across all technical disciplines Preparing monthly project status reports Raising and resolution of technical queries Establish working relationships with construction staff and supply chain representatives to promote buildability and supply chain efficiency in design outputs
• Experience in multidisciplinary process plant schemes Working knowledge of CDM and construction Health & Safety Knowledge and experience of Off-Site construction techniques Interest & desire to be innovative Excellent oral and written communicator with the ability to work in close partnership with clients and end users. Must be delivery driven with the ability to set targets and manage and motivate multi-disciplinary teams to deliver to time, cost and quality objectives
• Experience in Water Industry in Scotland Level of experience as appropriate to grade Degree or equivalent qualification Chartered or near chartered in a construction discipline as appropriate to grade
• Ensure designs are completed in accordance with CDM Regulations Ensure a safe working environment for all staff Produce design documents which are cost effective, meet the requirements of the specification and which can be purchased, installed and commissioned effectively. Ensure that standard designs and design practices are utilised wherever possible. Agree the design cost budget and monitor performance against the budget and provide forecast costs to completion for individual projects Record, monitor and control design changes in order to maximise cost efficiency. Organising the work required and documenting it in the Design Management Plan Delivering the design stage outputs of each project within the agreed timescale and budget Coordinating design outputs across all technical disciplines Preparing monthly project status reports Raising and resolution of technical queries Establish working relationships with construction staff and supply chain representatives to promote buildability and supply chain efficiency in design outputs Take all reasonable steps to ensure appropriate confidentiality
• Experience in multidisciplinary process plant schemes Working knowledge of CDM and construction Health & Safety Knowledge and experience of Off-Site construction techniques Interest & desire to be innovative Excellent oral and written communicator with the ability to work in close partnership with clients and end users. Must be delivery driven with the ability to set targets and manage and motivate multi-disciplinary teams to deliver to time, cost and quality objectives. Qualifications Degree or equivalent qualification Chartered or near chartered in a construction discipline as appropriate to grade
• Experience in Water Industry in Scotland Level of experience as appropriate to grade
• Execute preliminary and detailed design for arterial roadways, highways, and freeways
• Preparation of geometrics report and preliminary design report
• Preparation of contract drawings and documents for tender and construction
• Attend project meetings with clients, architects and consulting disciplines
• Provide proposal preparation support when required
• Provide support during construction phase as required
• Hold an engineer’s license from the Professional Engineers of Ontario
• Minimum of 5 years of related experience
• Working knowledge of Auto Cad and Microsoft Office software required
• Practical knowledge of the MTO, TAC design procedures and standards
• Ability to work in a team based environment
• Bilingualism will be considered an asset (English/French)
• Carry out all aspects of Fire and / or Security design work for projects within the business as may be required
• Ensure all Bids, tenders and project works are delivered to the highest standard in line with current legislation, standards and code of practice
• Support the wider team with consultancy or design issues
• Maintain organisation and planning ability of own workload but additionally to work as a national team wherever required
• Review, comment and approve the technical conformity of specifications produced by others and have responsibility for checking and highlighting design changes
• Previous experience of Electrical/Mechanical Building Solutions would be preferred by not essential
• Experiences of Innovative Integrated Solutions and Design Specifications/Presentational Packages
• To be conversant with the products and systems specified and with any significant limitations inherent in such products and systems
• Be up to date in respect of new technologies, technical standards, regulatory standards, and the national implementation of EU directives, etc. that are relevant to the design process
• To have a clear understanding of construction industry and tender related works
• EIT/PE certification
• Ability to communicate project risks, issues and impacts as well as ability to propose mitigations
• Ability to follow and forecast to resource loaded schedules for all projects
• Demonstrates informed judgment when making decisions and recommendations
• Uses judgment in applying engineering principles and techniques to determine cost effective and practical solutions
• Interpret piping and instrument diagrams, plot plans, piping isometrics, piping plan drawings, piping specifications and bills of materials, area classification drawings, and instrument details for projects in petrochemical and gas plants, refineries, LNG terminals, tank farms, pipelines, and other specialty engineering projects
• Produce engineering calculations and Heat Tracing Designs using 3-D and 2-D design software programs (TracerLynx, TraceCalc Pro, and MTO-data base, etc)
• Build and maintain effective working relationships with other functions and departments
• Provide technical support for field construction personnel from the office
• Perform additional assignments per supervisor's direction to support the teams overall success and exceed customer expectations
• Verify all completed work complies with applicable specifications, customer drawings, codes, etc
• A degree in Electrical/Mechanical engineering or engineering technology preferred
• 2+ Years’ experience with detailed design for refining, petrochemical and industrial plant projects
• Technical understanding of piping materials, components, valves, etc
• Technical understanding of Ohm's Law, and electrical properties
• Display an understanding of physical properties such as temperature, length, voltage, current, pressure
• Be a self-starter/self-motivated, detail oriented and a good communicator both written and oral
• Computer literate - proficient in a wide variety of MS Office programs (Word, Excel, Access)
• Able to develop relationships with clients, contractors, subcontractors, etc
• Some travel may be required to project sites or fabrication facilities
• Show a strong commitment to Customer focus, Respect and Teamwork, and Innovation
• Display positive energy, accountability, and integrity
• Accountable for timely, accurate and effective implementation of engineering and project design related work
• Establish and maintain drawing standards and design practices of work being prepared
• Lead department design resources in interfacing with the engineers and other departments
• Analyzed designs for commercial fabrication and manufacturing
• Assist and support development and implementation of departmental/platform initiatives
• Develop and improve skill levels within design department
• Lead design related projects and manage cross functional teams
• Support the intellectual property process and provide all information needed for apply for patents
• Technical expertise and leadership
• Proficient in various 2D and 3D drawing platforms
• Ability to work and collaborate with diverse teams or groups
• PQ/APPT Training completed
• Excellent leadership skills
• Self-directed and detail oriented
• Strong design and innovation skills
• Maintaining advanced engineering and manufacturing facilities across the globe
• Exchanging product, process and benchmarking information with other ITW units worldwide
• Continually improving processes, material and designs to ensure every product exceeds customer specifications while providing unparalleled value
• Hiring, developing and retaining the best employees
• Design automotive parts and systems to meet new customer expectations
• Work closely with customer design and engineering teams
• Responsible for selecting materials and design function
• Utilize lessons learned from previous design projects
• Understand manufacturing processes, incorporate processes into designs that can be successfully manufactured
• Must follow TS16949 procedures as they apply to design
• Analyze and interpret technical data
• Responsible for data transfers between customers and suppliers
• Assists with suggested changes to facilitate manufacture of assembly
• Operate in a cross-functional team environment, both domestic and international
• Responsible for providing project updates at scheduled team meetings
• 1-3 years’ experience of engineering and design; Automotive experience highly preferred
• Effective oral, interpersonal and written communication skills
• Knowledgeable in Plastic Injection Molding part design, performance, material selection, tooling technology. Skills and experience with CATIA 3D preferred
• Self-starter; works with minimal supervision
• Ability to display leadership in appropriate engineering discipline
• Plastic part design experience, including automotive “A” surface parts
• Ability to perform analysis using the following tools and/or processes: Geometric Dimensioning & Tolerancing (GD&T), FMEA (Failure Modes and Effects Analysis), Moldflow simulation and Finite Element Analysis (FEA)
• Design, develop and test mechanical components, valves, assemblies and adapters which comprise the fuel systems of our cordless tools
• Create engineering CAD drawings, bills of material and manufacturing assembly instructions
• Update/revise engineering documentation and prepare/submit engineering change notices
• Develop prototypes, test units and the appropriate manufacturing/testing processes to meet required product quality standards
• Recommend, implement and track performance of design modifications to eliminate product or system malfunctions
• Collaborate with marketing, purchasing, manufacturing and other departments to understand and achieve customer product requirements
• Design test equipment for measuring and analyzing the performance of fuel components, assemblies or systems
• Responsible for the design, layout and evaluation of mechanical and electro-mechanical devices or systems
• Create engineering component and assembly drawings, bills of material and manufacturing assembly instructions
• Assist in the production of prototypes, test units and subsequent manufacturing and testing to meet quality standards and planned schedules for delivery within target cost parameters
• Perform product development activities including CAD layout/interpretation and implementation of customer specifications and documentation requirements
• Update/revise documentation and engineering drawings
• Prepare and submit engineering change notices
• Select and implement appropriate manufacturing processes and vendors to ensure cost-effective, robust products that achieve market success
• Experience in solid modeling is required
• Understanding and experience with industry standard documentation practices is required
• 2 years of experience with PTC Creo Elements (Pro/Engineer) or equivalent course work is preferred
• Design and lead the development of new products and major product programs covering frequency ranges from DC to 30 GHz and average power levels to 2000 W
• Research and conduct investigations and experiments in new technologies to design new or improve existing products. Develop, document, and implement design and action plans
• Responsibility for multiple passive product lines including but not limited to surface mount RF/Microwave passive components and circuits such as attenuators, terminations, bias-tees, gain equalizers, couplers, power dividers and temperature-sensitive resistors and attenuators
• Model, design, simulate, assemble and test of prototypes performing data analysis (S-parameter, power handling, etc.) to ensure compliance with product specifications
• Assist Sales, Manufacturing Engineering, Production, and Quality departments in resolving product issues, complaints, waiver requests, and in answering customer inquiries
• Create or assist in documenting engineering drawings, Bill of Materials, and accompanying drawing packages for new / existing product, procedures, or tooling / fixtures
• Bachelor degree in Electrical Engineering or related discipline AND
• Minimum of 5 years experience in related industry OR
• Equivalent combination of education and experience
• Experienced in use of computer-aided microwave or electromagnetic design software such as ADS, AWR Microwave Office, HFSS, CST Microwave Studio or equivalent
• Experienced in electrical testing, test equipment, and S-Parameter characterization
• Experienced with CAD systems such as AutoCAD, SolidWorks or equivalent
• Experience with modern manufacturing methods and electrical/ electronic assembly
• Able to travel, as necessary
• Proficiency in office software such as Word, Excel, and PowerPoint as required; ability to perform math calculations, measurements, analysis or reporting as directed
• Familiarity with ISO & Lean manufacturing methodologies
• Masters degree in Engineering
• This is an office-based position
• Integrate the design of the wire harnesses with the Structural Suppliers and Systems Installation through meetings and reviews
• Create the Electrical System Schematics, Harness 3D models, Topology, Wiring Diagrams and Wire Harness Reports
• Support the creation or validation of the component library
• Organize or attend regular meetings with the team to create and maintain the Bombardier Permitted Parts List (BPPL)
• Conduct or participate in trade-studies to enhance the product definition throughout its lifecycle
• Review and approve supplier deliverables
• Support the Test Rigs and Final Assembly Line for wiring issues
• Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt
• You have a University degree in Aircraft Avionics or Electrical Engineering, or equivalent work experience in Wiring Integration or Methods
• You have minimum 10 years of relevant working experience in Aerospace
• You have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes
• You must have excellent communication skills including the ability to read/ write in English
• You have a strong sense of responsibility and have good integration/ organizational skills and initiative
• You are innovative and open to new ideas
• You have the ability to resolve problems and conflicts
• You are comfortable working with the MS Office suite
• You have over 5 years of CATIA V5 Experience in harness routing
• Reporting to a Project Engineer or Engineering Manager, this role is responsible for designing and developing mechanical and electro-mechanical components and assemblies
• Create engineering drawings, bills of material and manufacturing assembly instructions. Revise documentation and engineering drawings. Prepare and submit engineering change notices
• Ensure proper documentation for each project with respect to the product development and revisions made
• Assist in creating prototypes, test units and subsequent manufacturing and testing to meet quality standards and planned schedules for delivery within target cost parameters
• Recommend, implement and track the performance of design modifications to eliminate product or system malfunctions
• Perform product development activities including CAD layout and interpretation and implementation of customer specifications and documentation requirements
• Select and implement appropriate manufacturing processes and vendors to ensure cost-effectively, robust products that achieve market success
• Generate innovative new product ideas and applications using CAD system
• Develop assembly and detail drawings including reviews of completed drawings for accuracy and adherence to specification requirements
• Insure that each project is managed by a milestone to ensure that design and prototype lead times are well defined and schedules are adhered to
• Work closely with Project Engineer to support the design and development of new products
• Depending on complexity, will typically have responsibility for several technical design assignments
• Provide Design and drafting support to Project Engineers
• Perform all work in accordance with published TA Aerospace engineering processes and standards
• Maintain technical accuracy and quality of work for all assignments; i.e. analytical support, review design alternatives and tolerance studies
• Provide assistance to Sales/Marketing as required
• Provide technical support to suppliers as required
• Participate in lean product development and process improvement events; assist with value stream mapping, establishing future state and fully defining improvement opportunities
• Daily execution within Esterline Operating System (EOS). Communicate and reinforce EOS through demonstrated commitment to the prescribed principles, tactics, and behaviors
• Ensure Compliance with EH&S, Trade Right, Ethics and Business Conduct and all established operating procedures
• Bachelor Degree in Mechanical Engineering discipline
• 3-5 years of applicable progressively complex engineering design experience
• 2 years’ experience with CAD software and 3D solid modeling, Catia V5 preferred
• Extensive knowledge of Aerospace elastomer molding and mechanical components is preferred
• Must be able to work effectively in a team environment. Must be self-motivated
• Accountable for schedules and response times
• Ability to read and interpret engineering blueprints and specifications
• Strong technical writing skills; able to convey content as well as understandability at all levels of the organization
• Expert working knowledge of Microsoft Office (Outlook, Word, and Excel) and Visio
• Must be able to work effectively with minimal supervision and multitask to manage routine tasks in addition to special projects
• Excellent responsiveness and customer focus in a fast-paced environment
• Customer Focus:Employee knows and understands the needs of internal and external customers, is results oriented, and works hard to consistently provide exceptional service
• Ethics and Values:Adheres to an effective set of core values and beliefs and acts in accordance. He or she rewards the right values and disapproves of others
• Problem Solving:Looks beyond the obvious to find effective solutions
• Integrity and Trust:Is widely trusted and seen as direct and truthful
• Functional/Technical Skills:Possesses the skills to be effective in the job. He or she has the skills to perform the job at a high level of accomplishment
• Listening:Practices active and attentive listening; is able to hear the views of others. He or she is action-oriented, full of energy, and willing to take action
• Composure:Cool under pressure, not knocked off balance by the unexpected, is a settling influence
• Values & Diversity:Supports fair and equal treatment for all
• Bachelor's degree (B. S.) in Mechanical Engineering field from four-year college or university
• Previous experience in an aerospace or technology manufacturing environment
• Mechanical/Chemical Engineering degree is a must
• Total experience between 5 to 10 years. Minimum 5 years of experience of working in the static equipment design group of a leading engineering consultancy or in the design office of a reputed process equipment fabricator
• Knowledge of material specifications used in the design and construction of process equipment
• Knowledge and experiance of working with latest international codes like ASME section VIII Div 1 and Div 2, TEMA, API 650,API 620, IS 2825 and IBR
• Candidate should be well conversant with the use of softwares like PV Elite, Compress and hands on knowledge of PDS/PDMS
• Exposure to other international codes and standards
• Knowledge in proprietary equipment like FRP, Aircooled exchangers, Plate type heat exchangers, Glass lined equipment etc
• Knowledge in Flare systems and Fired heaters
• Experience in preparation of FEED documents, PMC projects etc
• Have good understanding of requirements of other groups
• Good leadership qualities
• Deal directly with customers by telephone, electronically or face-to-face
• Keep various internal recording and reporting tools up to date
• Communicate and coordinate with internal departments
• Design electronic schematics, PCB layout ,circuit simulation and calculation and review with team
• Hand on preformance tests of electronics board
• Lead EMI/EMC/Safety tests/Life test and failure analysis
• Master Degree with minimum 3 years hardware design in Electrical, Electronics Engineering or equivalent
• Experience in schematic design and circuit calculation/simulation of MCU, digital, analog and power electronics circuit
• Demonstrated project management skills
• Familar with PCB layout and PCBA build process
• Familar with electronics circuit performance/EMC/EMI/reliability testing and problem solving
• Familar with related electronics industry regulatories(RoHS, REACH, UL, IEC etc)
• Team player and Quick learner
• Experience in appliance electronics control development
• Background on reliability and six sigma is preferred
• Knows and applies the fundamental and some advanced concepts, practices and procedures of mechanical engineering design 2. Designs, develops, and refines components and sub-systems according to internal and external standards 3. Works under close supervision and with specific direction provided by more experienced staff 4. Keeps supervisor informed regularly on status of work. 5. Has some latitude for independent action or decision
• 2 years of design or related experience preferred
• Demonstrated design successes on components and/or non-critical sub-systems
• Must have some Industry Knowledge
• Designs electrical systems for visualization: creates/directs schematic capture, PCB layout, PCB manufacturing
• Board bring-up & verification
• Writes software for embedded systems (e.g. ARM) including graphical user interfaces and control systems
• Creates firmware for FPGAs including video algorithms and softcore processors
• Responsible for creating and developing product user needs and specifications
• Does research on possible applications for endoscopy by creating proof-of-concept demonstrations
• Advances the state of technology by moving proof-of-concept prototypes to realizable products
• 0-4 years related design engineering experience
• Strong technical background in electrical engineering, computer engineering, computer science, or biomedical engineering
• Design experience as a leader of a team
• Self-motivated and a self-starter, but works well within a team structure
• Curiosity across multiple disciplines, willing to and interested in: learning new fields, techniques, and sharing ideas
• Comfortable working with hardware at a low-level
• Familiar with one or more microcontroller architectures
• Strong technical expertise in at least one area: embedded systems software/firmware design, one or more programming languages (C/C++/Java or other object-oriented language, Matlab, LabVIEW), embedded and/or real-time operating systems, digital or analog design, FPGA design and algorithms, image/video processing algorithms
• Shows desire to be involved and engaged by participating in multiple extracurricular activities
• Sedentary work: Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, etc. Generally involves sitting most of the time
• Must have the ability to work with and assemble small objects and component parts
• Ability to operate common office equipment (e.g. calculator, PC, telephone, etc.) and common measuring devices (e.g. micrometers, calipers, voltmeters, etc.)
• Must have good visual acuity and demonstrate fine motor skills
• Must be able to observe and correct minute inconsistencies (e.g. in the printed word, product appearance, etc.)
• Must be able to generate, follow and explain detailed instructions and design parameters
• Must be able to complete detailed documentation accurately
• Must be able to analyze and correct complex product design issues of a moderate scope using independent judgment
• Effective interpersonal communication skills
• Demonstrated ability to operate small hand tools (e.g. pliers, screwdrivers, hammer, wrenches, etc.), power tools and test/inspection equipment
• Demonstrated mechanical/electrical problem solving skills
• Under minimal supervision designs, develops, modifies and evaluates electronic and/or mechanical components for mechanical and/or electromechanical medical devices
• Will determine and implement design approaches and parameters and conduct feasibility studies on new designs
• Will analyze equipment to establish operating data, conduct experimental tests and evaluate the results
• Will select components and equipment based on analysis of specifications, reliability and regulatory requirements
• Will aid in the development process by ensuring designs are cost efficient, manufacturable and reliable
• May assist in evaluating vendor capability to support development
• Will submit periodic reports on assigned topics to supervisor
• May interact, telephonically, with customers to resolve product issues
• Has the independence and authority to perform require tasks to ensure all provisions of the quality system are met
• 1+ years’ experience micro-controller, CPLD/FPGA, DSP, and digital logic design preferred
• 1+ years’ experience with low level programming languages including Assembly, C, and/or C++ preferred
• 1+ years’ experience with linear and switching power supply design preferred
• 1+ years’ experience using test equipment including oscilloscopes, logic analyzers, and multi-meters preferred
• Knowledge of analog and digital circuits including amplifiers, power supplies, filters, transistor circuits, microcontroller systems, and sampled data systems preferred
• B.S. in mechanical or electrical engineering or related curriculum
• Proactively collaborates with internal teams/departments to promote a culture of inclusiveness and cooperation
• Responsible to live and exemplify Stryker’s Values: Integrity, Accountability, People, and Performance
• Knows and applies the fundamental concepts, practices and procedures of electrical engineering design
• Designs, develops, and refines hardware systems/sub-systems according to internal and external standards
• Works under close supervision and with specific direction provided by more experienced staff
• Industry knowledge preferred
• Competent in Microsoft Office (Outlook, Excel, Word, etc.)
• Responsible for the timely and quality deliveries of the assigned tasks
• To take ownership of assigned tasks and work with different stake holders in US for all projects related aspects
• Effective communication with cross functional teams
• Work closely with SMEs throughout the project execution to ensure best quality work
• Develop an open culture to instill confidence, diversity of perspectives and knowledge sharing
• Compliance to Quality Management System and Stryker’s Design Controls
• Product Design & development of structural components
• Proficient in modelling (3D CAD) detailing (2D Drafting) using Pro-E Wildfire / Creo Standards
• Basic GD&T knowledge
• Knowledge of basic/advance surface modelling in Pro-E Wildfire / Creo
• Knowledge of ECN Process
• Basic Knowledge of FEA, dFMEA, DFM, Tolerance Stack-up
• Knowledge of FEA
• Design Verification and Validation
• Understanding of Medical domain and clinical setting
• Knowledge of Navigation systems
• BS/MS in EE/CS required with at least 2 year experience
• In-depth understanding of processor pipeline architecture, memory sub-system, cache system. Instruction set architecture
• Must have taken courses in logic design and synthesis, computer architecture and VLSI design
• Hands-on logic design experiences using Verilog, RTL simulation, STA
• Good team work spirit and communication skill
• Mixed signal design and verification
• Digital verification
• Sc. of Computer Engineering/Electronic Engineering
• Experience: More than 5 year of experienced is required
• Translate user requirements into system requirement specifications
• Device concept development, design preparation, initial prototyping, and coordination of outsourced prototyping
• Verification and validation activities
• Provide deep technical expertise and execution across multiple projects
• Engage external customers and partners to understand and overcome workflow challenges
• Work closely with biologists, chemists and electrical and mechanical engineers in the development of mechatronic solutions to cell and gene therapy industry challenges
• Drive effective communication across the organization and leadership team
• Work with leadership to identify and prioritize future project opportunities
• Identify, evaluate and recommend new and existing technologies to improve workflows
• Demonstrate continuous integrity, credibility, and positivity and motivate others to do the same
• Continuously grow and adapt in a fast-moving field to keep yourself and the organization at the forefront of the cell and gene therapy and regenerative medicine fields
• Using 2D and 3D CAD software, prepare designs, engineering analysis, detailed drawings and assembly models complete with dimensions and tolerance
• Revise and alter detailed and layout drawings to conform to engineering designs
• Direct the construction and testing of prototype and pilot products and conduct analysis of the test results
• Interface directly with other engineering functions to clarify design and drawing questions and assist prototype manufacturing n trouble shooting design issues
• Ph.D., Master’s with 4+ years of experience, or Bachelor’s with 6+ years of experience with a degree in mechanical engineering, electrical engineering, or a related field
• Demonstrated 3D modeling expertise
• Demonstrated success in engineering development and the design/integration of product requirement specifications (user, system, usability)
• Experience with procurement, buildup and testing of prototype hardware, instrumentation and software
• Experience in conceiving, developing and carrying out experiments in component hardware and transferring component level tests into full scale hardware solutions, including verification/validation planning and execution
• Strong English written and oral communication
• Working knowledge of analytical and experimental methods for development of dynamic systems, process systems, devices, and/or robotics
• Experience in analysis and design of machine components, motion and process control hardware, and software and firmware design
• Industry design experience with medical devices across the full product development life cycle
• Familiarity with cell and gene therapy or regenerative medicine
• Familiarity with the applicable regulatory frameworks and requirements for cell and gene therapy and regenerative medicine, such as cGMP, ISO, or medical device development
• Independent, detail-oriented, self-starter with excellent analytical skills and the ability to multitask and succeed in a team environment
• Demonstrated initiative and the ability to deliver high quality outcomes
• Intermediate-to-advanced proficiency with computer productivity software (e.g. MS Office) and a range of technical applications (e.g. JMP, FlowJo, Matlab, SolidWorks, etc.). Experience with reliability measures and tools
• Experience in structural engineering, analysis and verification of mechanical structures, fluid flow, thermal analysis and/or electro/opto-mechanical assemblies
• Detail study of the tender document and prepare scope for supply
• To prepare G.A drawings
• Load calculation and calculation of transformer
• Preparation of single-line diagram & panel design
• Calculation and optimization of cable sizes, cable routing and cable tray layout
• Calculation and optimization of earthing material & earthing layout
• Calculation and optimization of lighting fixture & lighting layout
• Calculation and preparation of schematic & layout drawing for ELV or Data system
• Preparation of BOQ based on drawings
• Preparation of datasheet for electrical equipments
• Vendor developing, client co-ordination and internal engineering co-ordination
• Knowledge about PLC, SCADA system and instrumentation equipments
• MEng degree in civil engineering (preferred but not essential)
• High level of IT literacy and numeracy skills
• The ability to be adaptable and able to work both independently and as part of a team
• The ability to confidently build and maintain external and internal relationships
• The ability to produce clear and logical written communication
• A systematic logical approach to problem solving
• Strong attention to detail and demonstrate accurate work
• Flexible approach to work, and ability to prioritise and manage time effectively to meet deadlines and client needs
• Will be highly motivated to learn on the job as well as undertake training
• Communicate with the Team Leader, Engineering Manager, and Product Manager to collect, understand, and verify product requirements and cost targets
• Collaborate with the Manufacturing Engineer and/or Quality Assurance Associate for manufacturing documentation as well as ensure successful manufacturing launch
• Develop computer-based designs and simulations for new products
• Analyze and identify design risks
• Mitigate production issues by communicating with engineering and product managers
• 2-5 years of Product Engineering experience
• A minimum of 2 years working with 3D modeling software, preferably Creo
• Lean Manufacturing experience
• Experience working in the agriculture industry, specifically with swine and/or poultry related products
• Experience designing sheet metal or plastic injection molded products
• Perform agency testing (IEC, UL, CSA)
• Estimate test times
• Troubleshoot technical problems and make recommendations to design engineers
• Monitor production test data and identify trends
• BS Electrical Engineering and minimum of three years in the field of electronics
• Provides leadership in the design, analysis and construction of prototypes that meet product requirements and agency standards
• Negotiates product and project goals with the cross functional teams and management
• Supports the engineering verification testing and agency testing
• Oversees the completion of the product release including all drawings, schematics, theory of operation, analyses, tests, and bills of materials required to completely specify and produce the product
• Develops architectural specifications and conceptual designs
• Ensure product quality and reliability by conducting design reviews, reviewing test and qualification data and assuring in-house qualification is complete and accepted
• Leads sustaining engineering efforts through the Special Features and Application process
• Use field failure analysis information to improve manufacturing and engineering processes
• Develop manufacturing & test procedures, forms and guidelines
• May serve on industry technical committees
• Must have knowledge and experience working with 3-phase power products and power distribution
• Must have experience designing, installing and troubleshooting switchgear, automatic transfer switches, uninterruptable power supplies and/or generator systems
• Must have a good working knowledge of power conversion, specification development, manufacturing techniques, cost analysis and design verification testing
• Must have experience with test equipment to test and troubleshoot 3-phase power products
• Knowledge of PLC based controls (Allen-Bradley, Modicon, Siemens, etc.) is desired
• Computer proficient including MS Office (Word, Excel, Visio), Matlab/Simulink, PSpice
• Experience with Product Lifecycle Management (PLM) tool is desired
• Good planning, organizing, documenting, and communications skills
• Bachelors degree in Electrical Engineering with emphasis on power systems engineering and at least 3 years experience in the design and testing of power products such as UPS’s, Switchgear, Automatic Transfer Switches or generators systems
• Assist sales and marketing by meeting with customers and potential customers to demonstrate our engineering capabilities
• Work as a team with project manager and directly with customer to develop specifications to meet their needs
• Design embedded hardware and software to meet customer specification requirements
• Work with customer to provide continuing engineering support during all phases of a design through the life of the product
• Assist production with various engineering related issues arising during production of products that were designed here and others that were designed by customer
• Work on engineering projects as assigned
• Achieve required engineering metrics
• Work closely with Project Management and Installation teams to insure project profitability is met
• Work with the Quality Teams to insure the Engineering package is at the highest level of quality possible
• Insure the accuracy of materials ordered is at the highest level possible
• Perform all work with safety in mind and insure that all safety measures are met
• Mentor less experienced Design Engineers
• Assist Field Engineering team as needed
• Assist other segments of the business such as Purchasing, Material Operations, etc. with technical support and guidance
• Create Engineering tools such as Template Specs, BOMS, Drawings, etc
• BS degree in Electrical or Mechanical Engineering or minimum (2) years experience in DC Power and/or Central Office Transport Design Engineering
• Familiarity with DC Power and/or Transport industry specifications and testing
• Ability to manage multiple projects effectively and efficiently
• Ability to forecast completion dates and willingness to meet deadlines
• Performing instrumentation on your office
• Development of three-dimensional models designed components and assumptions of finished products
• Preparing of technical drawings
• Ordering parts from subcontractors
• Providing all drawings, analysis, engineering calculations which are essential to start production
• Product support for engineer of product to start serial production of a new one
• Planning and reporting the progress of work to superiors
• Participation in project planning
• Higher technical education (mechanical preferred)
• 3 years’ experience working as a design engineer ( necessary)
• Ability to read technical documentation and use of measurement tools
• Knowledge of manufacturing technology and assembly techniques and 5S, FMEA and Lean Manufacturing
• Preferred knowledge of Pro Engineer (Creo) or other CAD programs, 3D
• Independence and good organization of working time
• A letter of reference from one of the previous employers (will be an advantage)
• Bachelor's degree in Engineering from an accredited four-year college or university
• Plus a minimum of 3 - 4 years of related experience and/or training
• With a minimum of 2 years experience as a Design Engineer I
• Specific requirements as defined by market sector
• Initiate and develop design concepts to meet cost objectives, schedule, machine parameters and criteria by use of layouts and installation drawings. Layout, design and create drawings via solid modeling, using Division CAD system, with guidance and direction provided by supervisor
• Develop and perform basic stress/system calculations using Division CAE (such as FEA) and also implement design improvements and cost reductions across the entire product line
• Should have a basic understanding of the financial impact of Engineering on the business
• Interface with vendors and suppliers to locate and approve components
• Must be able to utilize production control business system and personal computer programs such as Access, Excel, Word, Power Point, etc
• Write work instructions for prototype and test technicians. Monitor prototype builds and assure proper assembly. Implement product design concepts for manufacturability with Manufacturing Engineering
• Review, analyze and report on product parameter compliance via test reports, spec sheets, etc. Develop action plans to meet compliance if necessary
• Must be able to coordinate with all necessary departments within the Division in order to develop and produce new designs
• Be able to manage multiple small projects, including schedules, costs, etc with limited scope, communicates progress with supervisor
• Works in specific Engineering functional technology or product line (ie, hydraulics, electrics, pavers, etc.)
• Must demonstrate a high degree of problem solving ability, especially in the field of expertise
• Develops complex design concepts into tangible, workable machine details. Requires technical knowledge concerning drafting and design disciplines, product cost and product performance. This position reports to the Group/Team Leader of the technology group, along with Design Engineers, Designers and Draftspersons. This position has no direct reports, but has responsibility for design details and conducting some project scheduling and planning
• This position frequently interacts with marketing, sourcing, service, manufacturing, purchasing and prototype
• This position may require expertise in a particular field or aspect of machine design. In addition, the incumbent will interact with outside suppliers, customers and salespeople. Some travel, usually domestic, is required
• The job’s greatest challenge is the timely development of design solutions to improve and update existing models or develop new products and keep up with the latest in technology in the field of expertise
• B.S. in Engineering with 2 years of design and engineering experience in mobile construction equipment; education/expertise in a specific engineering field or machinery components may also be required
• 8 + years of practical hands-on experience with power electronics control systems, preferably on IoT products, power converters and related
• Experience and expertise with lab tools such as debuggers, logic analyzers and oscilloscopes
• Hands-on experience and possess deep knowledge of basic Bluetooth, Wi-Fi, GPS, UWB, NFC, RFID hardware and DC/DC converter topologies such as Buck / Boost and fly back topologies
• Experienced and capable of testing and debugging circuits using chipset (like TI AM4376, OV788, TLV320AIC3262) Nordic nRF52832 or equivalent
• Must be intimately familiar with power supply safety and environmental certifications, offline controllers, components, magnetic design, high speed mixed signal layout and state-of-the art techniques
• Possess good understanding of thermals, mechanical and packaging challenges for IP67 related products
• Knowledge of high volume manufacturing technologies and production variances
• Practical Power Electronics knowledge and experience
• Thinks outside the box when developing solutions
• Experience with power line communication (PLC)
• Bachelor’s Degree in Electronics Engineering
• C Programming experience
• Masters or PhD
• 3 to 5 years’ experience in similar position
• Experience working with Auto Cad and Solid Works
• Capable of accurately scoping a project, and executing a major portion of a design or verification independently. Capable of quantifying the impact of a customer change against established schedule and quote
• Journals. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively communicate with employees, managers and customers
• Ability to develop models for simulation of complex components or subsystems
• Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
• Executes and provides input into functional strategic plans and objectives for site. Demonstrates experience in leading major initiatives and provides input to those initiatives
• Design of CAD models and drawings in CATIA V5 according to customer specifications and JCI standards
• Generate 2D/3D product data sets and release of data in due time
• Generate bill of materials
• Verify drawings according to specific customer and JCI design standards
• Package ,structure and kinematic studies
• Project documentation
• Create, maintain and chare best business practices with colleagues and supervisors
• Min. bachelor degree in mechanical engineering
• Relevant work experience and skills in product design needed
• Experience in the field of automotive manufacturing and in development of seating would be appreciated
• Knowledge of design in 3D system, ideally CATIA V5
• Customer orientated approach
• Advanced English, German language also welcomed
• Review project scope and derive engineering requirements
• Develop detailed engineering plan and work with cross functional team to implement the plan
• Develop detailed design, and review (as required) and complete engineering documentation
• Bachelor Degree – Mechanical with 3-5 years of Experience
• Participate in Design review meetings as necessary. Prepare necessary documentation for the meeting
• Provide updates on progress or significant project issues to Supervisor and/or other team members
• Work with customers to design containers that will work with their processes and products
• Integrating packaging designs with liquid chemical characteristics, manufacturing capabilities, and packaging constraints
• Develop and maintain a system for GE-generated designs using AutoCAD and PDM
• Drive improved product quality by identifying manufacturing issues, developing cost-effective solutions, and overseeing successful implementation into production
• Support Engineer-To-Order projects as needed
• Support internal technical support and customer support teams
• Innovate new designs and components leading us to a competitive advantage in packaging and manufacturing options
• Support existing packaging functions as needed
• Degree in engineering or other technical degree or equivalent experience in biopharmaceutical manufacturing and single use design
• Minimum 5 years experience in single-use design
• Minimum 3 years in customer-facing collaborations with customer contact
• Mastery of AutoCAD and PDM enterprise
• Familiar with Quality and regulatory requirements for biopharma industry
• Familiar with ERP systems
• Familiar with Microsoft Office suite
• Demonstrated ability to identify & implement best practices
• Previous Project Experience
• Support the architecture, design, deployment and integration of privileged account security solutions across multiple federal government agencies
• Support Solution Implementation Architecture activities
• Experience in the area of risk/vulnerability management, incident response, evaluation and recommendations, Security Assessment and Authorization (SA&A) development along with continuous monitoring for real-time threats. Experience in
• 10-12 years w/Bachelors Degree
• Perform refinery and petrochemical process design work as required to produce Schedule A design packages working as a member of a design team and perform studies relating to revamp of existing processing units
• Work under close to moderate supervision. Results are reviewed and technical guidance is available
• Decision making limited to routine issues / problems
• Size process piping and run hydraulics
• Keep Project Manager informed of progress on assigned tasks. Bring any problems with man-hour overruns or schedule delays to the Project Manager as early as possible
• Attend and participate in project team meetings
• Apply current design practices and tools for completion of assigned tasks
• Bachelor's Degree in Chemical Engineering
• 3 or more years of refining experience (Operation or Design)
• Ability to travel globally 10% on an annual basis
• Associates degree in Electronics or other technical field or equivalent experience
• 10 years experience in engineering /systems or other related experience
• Strong knowledge of industry engineering fundamentals and business operations required. Experience with industry related Commercial Fire Alarm products
• Knowledge of Microsoft Office, MDT/CT, Navigator, and AutoCAD or any related Engineering Design Software required
• Fully proficient and independent design skills
• Qualified Applicants must be legally authorized for employment in the Unites States. Qualified Applicants will not require employer sponsored work authorization now or in the future for employment in the United States
• NICET Level III In Fire Alarm Systems
• Full understanding of NFPA 72, 101, NEC, and IBC
• Knowledge and/or experience in large scale design projects is desirable
• Knowledge and/or experience in synthesis and static timing analysis is desirable
• Knowledge and/or experience in non-volatile memory design (NAND in particular) is a strong plus
• Knowledge and/or experience with high voltage circuit design and datapath circuits commonly used in non-volatile memory is desirable
• Experience with mixed-mode design and validation
• Knowledge and Experience with transistor level simulators such as Spice, Ultrasim, HSIM is desirable
• Knowledge of TCL or PERL is a plus
• Ability to establish and maintain good relationships with colleagues
• Self-motivated, self-directed, and a team player (on the same team and outside of the team)
• Applies technical expertise, commensurate with training and minimal job experience, in the development of products and processes involving routine supervised application of proven, well-documented technology with low technical risk
• Designs products or modifies existing products using experience and knowledge of product applications and company standards. Prepares product documentation working from example documents
• Provides technical support to manufacturing, purchasing, marketing, vendors, and customers on routine technical matters of well-documented products
• Recommends engineering actions to, and guidance and approval from, supervisor before proceeding on engineering projects. 3
• Prepares plans, generally spanning several months, necessary to complete assignments
• Assures that product documentation meets quality requirements. Participates in failure analysis review, discrepant material review, quality steering committees, product development reviews, design reviews, and peer reviews
• Design and development of Internal Combustion Engine related systems, sub-systems and components
• 3D solid modelling and design within Creo or an equivalent design software package
• Capability to apply GD&T ASME Y14.52009
• Use of Teamcentre for drawing release and data management
• Ability to develop cost effective solutions and liase with suppliers
• Capability to contribute to DFMEA’s and DVP&R’s to an effective standard
• Effective analytical skills and problem solving ability (8D)
• Master degree or above, 3-5 year working experience
• Major in Micro-electronics, Electronic Engineering, Computer Science, Information Technology or equivalent
• Ability to work effectively alone or as well as in the team
• Essential that the individual demonstrates strong communication, verbal and written
• Requires good communication skills in English
• Working with Solid Edge or at least familiar with 3D modelling
• Good time management
• Competent user of Windows, MS office, Project, Lotus Notes and SAP
• Knowledge of pressure vessel products in a broad range of industries (Examples: Bio-Pharmaceutical, Water, Chemical, Micro-electronics, Nuclear and Food & Beverage)
• Design for manufacture / assembly experience
• HND/HNC or equivalent in a relevant discipline (Mechanical desirable)
• Ability to receive, review, interpret and implement customer specifications
• Experience of 3D modelling and 2D drafting in a manufacturing environment
• Familiarity with pharmaceutical or biotech industries would be an advantage
• Graduate or 1st/2nd position after graduate
• Pressure vessel products experience is an advantage
• Experience of designing machined / fabricated stainless steel components, pipework, machined plastics and working with close tolerance, multi item assemblies
• Knowledge of pressure vessel products, pneumatic / hydraulic systems and electrical control
• Familiarity with pharmaceutical or biotech industries and liquid chromatography would be an advantage
• Mechanical Manufacturing Industry experience (larger assemblies)
• Regulated Industry experience (Aerospace, Pharma, Automotive etc)
• Experience with Identity and Access Management technology using CA solutions such as Single Sign On, Advanced Authentication, API Management tools, and CA Directory
• Implementation\design experience in Linux, database administration (/Oracle), Web Farm concepts, database applications
• Domains: Infrastructure, Middleware, Identity & Access Management for SSO, MFA, and Identity
• Experience in the development, build, delivery, and security JAVA applications
• Working knowledge of multi-datacenter HA SiteMinder environmen
• Excellent Knowledge of OPAMP design, Voltage Regulator, Reference Generator, BGR, Temperature Sensor, ADC, Charge Pump Design
• Have good understanding of Solid-State device physics
• Comfortable with IC tools such as Cadence analog design environment, HSPICE/FINESIM, UNIX
• Work Experience : 3 - 5 Years
• --------------
• Strong communication, organizational and leadership skills
• PE/EIT certification
• Experience in electrical substation design
• Fluent with Microsoft Office, Outlook, Word, Excel, PowerPoint and Access programs
• Experience with Bentley Substation Software
• Preform preliminary Area Studies with careful consideration to routing and circuit functionality
• Works closely with the product design team to produce layouts that meet design requirements
• Create PCB layouts in Expedition including placement, routing, and planes
• Coordinates PCB layout effort with design personnel (EPM, engineers and designers)
• Schedule and lead PCB layouts design reviews
• Develop and create drawings/Gerber data and documentation to facilitate PCB fabrication and assembly
• Interact with Aviation configuration management personnel to properly integrate design data.Search Jobs US
• Generate, change and review specifying documents (e.g. DRW, BOM, LFT, ECO) for design changes as part of Technical Files and life-cycle management activities
• Ensure that documents are uniform, accurate and comply with applicable engineering, medical device and Nobel Biocare standards
• Execute / support life-cycle and compliance activities including change verification (e.g. testing)
• Identify, plan, perform, and document product changes and product / production improvements
• Conduct analysis (e.g. tolerance analysis based on GD&T, prototype evaluations, initial sample inspection, and complaints) and generate specifying documents in an accurate way to comply with applicable standards
• You are a positive minded, intelligent problem solver with a solid technical education (e.g. Design Draftsman apprenticeship with further studies in mechanical engineering) who likes to work with a hands-on attitude
• You bring 1 to 3 years of successful working experience in the mechanical engineering field - preferably in the dental, medical device or pharmaceutical industry
• You are experienced and skilled in the relevant tools (CAD NX & Team Center, SAP, MS Office)
• You work well with multiple tasks both independent as well as in interdisciplinary project teams through applying your communication skills (fluent in English, German is an asset)
• You are an independent and reliable specialist with attention to detail and desire to meet the needed quality
• Should possess strong engineering fundamentals
• Should have a good understanding of Analog Layout
• Should have a expertise in Physical verification flows(LVS/DRC) and Parasitic extraction flow
• Good understanding of process technology
• Should have strong communication skills and ability to interact with multiple teams
• Analog layout : Sound understanding of Analog Layout, understanding of process technology
• EDA : Proficiency with layout editor tool and all aspects of Physical verification
• Design knowledge : Good understanding of Design constraints and should be able to analyze the impact of layout on the circuit design
• Working experience : 3- 5 years is desirable, though if the candidate is good, we will make exceptions
• Provide support to sustaining engineering team to maintain current products
• Responsible for maintenance of all Standard Product Bills of Material and design as required
• Prepares engineering quotes for customer request on custom products
• Assist with Engineering Change Request (ECR)/Engineering Change Order (ECO) process as it relates to the Standard Products
• Provide basic design development/changes between for Electrical & Mechanical Engineering
• Generate electrical drawing schematic diagrams and PCB design layouts
• Generate basic mechanical drawing updates and layouts
• Designs assemblies to meet functional performance and cost requirements
• Performs engineering calculations to ensure performance requirements are met
• Interfaces with other departments & customers to assist in developing product specifications to meet application needs
• Meets project deadlines and determines schedule as needed
• Perform related duties as assigned or as the situation dictates
• Willing to work overtime and travel as needed
• Bachelors or asscoaties degree in Electrical Engineering or related field
• 3-5 years experience preferred, but will consider experience in lieu of education
• Proficient math & computer skills, advanced knowledge of electrical engineering & design
• Ability to articulate electrical engineering concepts and designs
• Basic mechanical engineering knowledge and CAD drawing experience a plus
• Must be able to communicate professionally internal and externally
• Must be able to adhere and follow our Company Values
• Positive attitude, respectful, encouraging, works well with others
• Communicates clearly, often, thoroughly, and honestly, listens well, responds quickly
• Self-directed, willing to be accountable for results
• Design and development of single use components, disposable mixing and bioreactor bags for Biopharm manufacturing industry. Recommend custom bag designs by evaluating customer process requirements (through direct contact with customer or through sales rep). Present design concepts to Engineering, Marketing, and Sales through sketches, renderings, CAD models, controlled drawings and reports. Create CAD layouts and of new products for customer review
• Help determine the practicality of the solutions and feasibility relative to performance, cost, and schedule. Coordinate with team of engineers off-site to establish basic design approach ensuring they are on time and within budget. Fit and functional performance evaluation. Make engineering prototype samples to facilitate quick customer design evaluations
• Provide technical support for investigating customer complaints pertaining to single use bioprocess bags. Conduct failure investigation by conducting testing in the lab or coordinating tests (failure mechanism) with outside labs
• Provide engineering/technical support by answering questions and requests from sales & marketing personnel in the field
• Documentation of engineering drawings, revision history, etc. using oracle-PLM (ECO, ECR) (follow good drafting standards, geometric tolerances, etc.)
• Solid works 3D CAD proficiency is required. Experience with Inventor 3D CAD software is a clear advantage
• Experience with document management processes is required. Oracle-PLM/SAP experience is preferred
• Experience or familiarity with bioprocessing is preferred
• Experience designing plastic components using 3-D CAD software and success in taking components through concept, development and into production is preferred
• Working knowledge of common and specialty engineering materials is desirable
• Problem analysis and assessment
• Attention to detail and high level of accuracy
• Ability to work in a team to meet aggressive project deadlines or commitments
• Bachelor’s degree with 5 years of work experience
• Experience working with mathematical concepts such as probability and statistics, as well as geometry, trigonometry, and calculus
• Excellent PC skills with proficiency in MS Office (Word, Excel, PowerPoint), MS Project, CAD and Statistical software
• Support supplier transitions/production ramp up
• Develop and execute plans to address capability shortfalls (manufacturing improvements, engineering changes, etc…)
• Drive six sigma process certification at critical manufacturing suppliers
• Provide on-site support at critical manufacturing suppliers (domestic & international)
• HNC/HND/Degree Civil Engineering or equivalent
• Proven Permanent Way Rail design experience, in a variety of schemes
• Experienced in leading the production of Permanent Way designs
• Experienced in undertaking design checks of outline and detailed design schemes
• Good knowledge of Network Rail and Railway Group standards relevant to P Way design
• Experience in mentoring Engineers and Technicians
• User of BRT design software
• Incorporated or Chartered Engineer with a relevant Institution – ICE, CIHT, IMechE etc. (desirable)
• Experience of wastewater network engineering including the design and specification of gravity and pumped systems
• Experience in drainage design including Sustainable Drainage Systems (SUDS)
• Knowledge of industry standard drainage and wastewater networks design
• Competence in the use of AutoCAD and Hydraulic modelling – Windes Microdrainage
• Proven track record in coordinating and delivering technically excellent projects on time and to budget
• First class written and oral communication skills
• A natural curiosity for developing innovative and cost effective solutions for our clients
• Competence in the use of Civil3D
• Experience working on a Design & Build environment
• Experience of team working on multi-disciplinary projects including the use of web based technology for sharing on screen information
• Proven track record in design delivery with specific experience of drainage design and SuDs solutions, from planning to construction
• Sound commercial understanding
• Team builder, developing the technical excellence of our team
• Able to develop and motivate others
• Proven record of developing client relationships
• Lead the planning and design of wastewater networks projects including gravity and pumped networks and sustainable drainage features
• Undertake hydraulic designs of wastewater networks using appropriate software and maintain high levels of awareness and application of developments in software packages
• Provide technical advice on SuDS to different Clients
• Project and design management of schemes, delivering projects to time and to budget
• Prepare and deliver technical presentations to market Atkins’ SUDS expertise to working groups comprising representatives of national and local government
• Maintain high levels of awareness of the implementation of changes in legislation affecting flooding and surface water management and assist with the identification and development of resulting business development opportunities
• Prepare financial and technical proposals for project opportunities
• Supervision, management and technical development of junior members of the team
• Client and stakeholder interface
• Co-ordination with other disciplines working on the projects and site team
• Develops test solutions for design verification of product with highly integrated system including RF transceivers, analog and digital circuits
• Strong software skills for developing bench test code in Matlab/C#/Python
• Good understanding of electronics engineering fundamentals, digital/analog, RF test methodologies and techniques
• A BS degree in Mechanical Engineering (or equivalent experience)
• A minimum of 5 years experience with complex part and assembly design using 3D CAD tools, preferably Catia V5
• A minimum of 3 years experience with internal combustion engines and related components, preferably within the automotive racing industry
• The ability to create, read and interpret complex engineering drawings
• Proficiency with PC-based workstation hardware and MS Office software
• Hands-on experience with internal combustion race engines and related systems
• A sound understanding of and experience with GD&T
• Experience with analysis and simulation tools such as FEA, CFD, etc
• Design and route cable and harnesses inside interior cabinets according to integration instructions and guidance
• Create the harness 3D models to support engineering deliverables (HDR & H3D)
• Design per BM, BAPS, and RAE documents
• Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle
• Deliver 3D models on time to meet team’s commitments and program milestones
• Incorporate change management authorities (RFC, PCR) into 3D models
• Contribute to the team effort by meeting the team’s objectives for productivity and quality KPI’s
• Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt
• You have a University degree in mechanical Engineering of equivalent work experience in harness routing
• You have experience with harness manufacturing or methods (formboards)
• You have minimum of 5 years of relevant working experience in Aerospace or Transporatio
• You have harness installation experience and you are familiar with ECAD tools & processes, BM’s and BAPS
• You have excellent communication skills including the ability to read/ write in English
• You have a strong sense of responsibility and have good organizational skills and initiative
• Provides technical support to customer engineers for Dynacraft products
• Models designs for both customers and Dynacraft proprietary products on Pro-E
• Develops and maintain assembly drawings on truck related components
• Develops bill of materials, labor estimates and product estimates
• Conducts product qualification testing and prepare test schedules, analysis and reports
• Resolves issues related to quality and manufacturing
• Works with suppliers to find the best performing products while reducing costs
• This position spends on average 3 days a week in Kirkland-Yarrow Bay, WA and 2 days a week in Algona, WA. This is subject to change each week depending on business needs
• Four-year degree in Mechanical Engineering or equivalent from an accredited university required
• Experience with Pro-E preferred or similar 3-D CAD software desired
• Truck/automotive product knowledge desirable
• Strong attention to detail with a “big picture” focus
• Excellent interpersonal and customer relation skills
• Exhibits strong teamwork
• Knowledge and use of 6 Sigma tools desired
• Creative mind with ability to find solutions and cost saving ideas
• Exceptional analytical abilities and desire to learn
• Working knowledge of MS Office products
• Bachelor Degree in electrical engineering, electronics or related fields. MS is preferred
• Five (5) years or more experience in product development activities
• Recent hands-on experience in actual circuit design. Experience in design of automotive electronics is preferred
• Experience in all aspects of Design & Development of Automotive Electronic Controllers. Experience in exterior automotive lighting is preferred
• Responsible for design and development of manual and motorized valve operators (gearboxes)
• Drive the product design activities for Ferrous casting casings
• Responsible for Bill of Material (BOM) preparation, verification and modification
• Responsible for 3D analysis – including checking of failure in design
• Involved in New Product Development (NPD) planning. Experience in gated NPD process is a plus
• Task delivery within a multi-phase development process for current and new product, to include requirement definition, design, development, testing, support and maintenance
• Provide solutions to a variety of technical problems of moderate complexity and familiarity with sound engineering and embedded firmware principles
• Interface verbal and written with cross-functional teams and management
• Mentor lesser experienced team members
• Algorithms, data structures, object oriented design
• Effective C++ programming, shell scripting languages, debug techniques
• Linux development and embedded boot-up / runtime environments
• Source code management concepts (Git / Perforce)
• Multi-phase development process and effective team collaboration
• Standard Template Library (STL), Inter Process Communication (IPC), multi-threads
• Kernel module and device driver development and principles
• GNU compiler and toolchains
• Build configuration and make system (cmake / ctest)
• Database design and SQL (sqlite3)
• Network and data transfer protocols (IP, CoAp, COSEM/DLMS, DBUS)
• Code profiling and memory analysis tools (Valgrind, Coverity)
• Bachelor's Degree in Engineering or related degree from an accredited college or university
• Minimum of 2 years of engineering experience or related discipline
• Master’s Degree in Mechanical or Structural Engineering
• Edison or ACE program graduate (GE Employees Only)
• Experience with 3D-CAD tools (NX / Unigraphics)
• Experience with ANSYS or other finite element analysis tools
• Welding or Sand casting manufacturing, material and Non-Destructive Testing knowledge
• Technical drawing, Geometric Dimensioning & Tolerancing (GD&T) and design interpretation background
• Wind turbine experience
• Construct moderately complex product designs and design layouts
• Assist in evaluating engineering design deviations and change requests submitted by other departments
• Provide other departments technical guidance as needed
• Travel to production plants, dealerships, and customer job sites to assist in solving problems
• Go to field test locations to assist with the development of engineering projects
• Assist in developing unique design features that the Company often patents to gain a competitive advantage
• Refine and improve product designs
• Provide technical guidance to drafting personnel and assembly or manufacturing processors
• Ensure proper maintenance of production drawings
• Accredited engineering degree or 0 to 2 years of progressive, relevant experience
• Good mechanical and computer aptitude
• Pro/E skills
• Mechanical Engineering degree is must
• Minimum 20 years of experience in Piping Department of'' an'' consultancy organisation
• Must have thorough knowledge in Piping layout, Pipe routing, Support design, Stress Analysis, PMS/VMS, MTO control, Material requisitions, Bid evaluation and 3D design model reviews
• Knowledge of International codes and Indian standards is essential
• Should have knowledge in PDS/PDMS/SP3D modeling software & SPR/Navisworks review
• Should be able to lead and guide a team of 70 plus engineers and designers
• Should have experience in lead role for FEED and Detail Engineering projects with exposure to field engineering activities
• Should know manpower planning, scheduling, man-hour estimate, etc
• Should able to analyze the design changes and communicate the impact of changes with respect to budget and project schedule and aware of change notes
• Should have leadership qualities and good communication verbal and written skills so as to communicate with client and lead offices
• Be able to mentor small project leads
• Should be able to add value plus/optimization ideas
• Undertake developmental activities like preparation of work instructions/procedures / guidelines
• Ensure completion of project within budget, schedule & quality
• Should able to contribute in development and growth of people
• Providing superior value and lower cost to the client
• Should able to contribute in continual improvement in productivity and quality
• Experience in following fields would be added advantage
• Learns the practical application of engineering principals, achieves expertise in Mechanical Engineering, and investigates new techniques as part of a team. Responsible for designing Mechanical product/subsystem release solutions
• This role requires the interaction with other service, manufacturing and design engineering teams in order to ensure the product quality goals set forth by the business
• Providing guidance and requirements to new product development teams in order to improve quality of new releases
• Designing new products and/or supporting Installed Base of mechanical components or subsystems
• Executes design to engineering standards
• Works within a team to deliver technical solutions
• Design 3D CAD models and essential component and assembly details to explore multiple design options
• Developing engineering design concepts for components and electromechanical assemblies that have demanding requirements for size, precision, reliability and cost
• Engaging in all phases of new product development, including concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support
• Identifying and developing new opportunities to leverage Strategic Sourcing objectives and Common Technology initiatives in the modality product line
• Conducting analysis of installed base and new product reliability using FMEA, Weibull Analysis and DFR
• Defining and executing component/subsystem/system design verification
• Developing innovative designs to meet all requirements for performance, reliability, cost and manufacturability
• Verifying product sub-system reliability performance
• Technology management within assigned field. (internal and external). To initiate development of new technologies
• Within the job competence cover possible patents
• Maintain and develop competence required for the job
• Bachelors degree in Mechanical Engineering or equivalent,
• 3 – 6 years relevant work experience
• Knowledge in mechanical design, structural engineering, analysis, and verification of mechanical structures, mechanisms, Electro
• Masters degree in Mechanical Engineering
• Demonstrated technical leadership capability in system integration activities
• Ability to meet aggressive reliability, performance, cost, serviceability, and delivery targets
• Demonstrated project leadership and influencing skills
• Design for reliability experience
• Design for manufacturing experience
• Support the sales team and customers with engineering and specialized solutions measured in terms of sales pertaining to machine investments, special tools and total customer satisfaction as expressed in success factors by offering design & drawings of engineered specials to customers
• Responsible for manufacturing design by evaluation of enquiries in terms of complete information, business Strategy & feasibility
• Create appropriate manufacturing design drawing
• Create 3D models of standard and special products according to ISO / DIN and Customer specific requirements
• Support with Proposal, Manufacturing and 3D to C to Global Design Offices in Europe , USA and Asia
• To make best proposal and manufacturing drawing based on inputs given by stake holders by using UG/NX
• Support field sales in the preparation of concept and understanding application of special tools
• Interaction with production units from design perspective
• Act as a role model/coach for PIEs and FSEs in terms of right design for the tool
• Document the activities and results pertaining to other specific assignments/projects
• Ensure the proper process of Special Tools with in the assigned area
• To make 3D models according to ISO/DIN and customer specific requirements
• Have around 3 years of experience in metal cutting – Design
• Fair knowledge in NX, AUTO CAD, UG, Machine Tool
• Have good communication skills with strong interpersonal relations
• Be a team player
• ----------------
• 1 year of experience civil and structural engineering
• Experience in design of electric substations and transmission systems
• Experience with SAP 2000 or similar structural analysis software
• Experience with AutoCAD or Microstation
• Master’s degree in Civil Engineering
• EIT or PE License
• Proficiency with MS Office products including Outlook, Word, and Excel
• Ability to work in a team environment and support fellow team members
• Structural design of steel structures, reinforced concrete foundations for structures, control buildings and equipment, and seismic retrofit of existing equipment anchorage and control buildings
• Civil design for access roads, drainage systems, and soil retention, and for grading and layout of new substations
• Environmental design of spill containment systems for large oil-filled electrical equipment
• You should have good knowledge on overall design of suspension system
• Design and installation of suspension components like Multi-leaf / parabolic spring, U bolts, bump stop, shock absorbers, anti-roll bar, structural design using casting/sheet metal/forging process. Understanding of complete suspension dynamics to be able to do the best overall design meeting required application
• Involved in project vehicle builds, Verification and Validation of suspension components and possessing very good knowledge in analysing results of testing thereby improving design to meet the project demands
• Knowledge of legal requirements for markets related to steering system
• Support to Purchase Department in component development which are Volvo design or work along with supplier where component is the design proprietary of supplier
• Must have very good skills in Pro-E
• Mechanical / Aeronautical Engineering knowledge
• Design Process
• Product definition industry standards
• Materials selection
• Flow effects of liquid and air
• Manufacturing techniques / process capabilities
• Budgeting, Task Organization, Reporting and planning
• Mechanical or Aeronautical Engineering Bachelors Degree
• Or BTEC qualification with suitable experience
• Chartered status with IMechE or RAes is desirable however not essential
• Aerospace new product introduction
• Design of equipment for Aerospace or other complex product markets where performance and high reliability are paramount
• Mechanical engineering techniques
• Design and Validation/Verification process
• Calculation methods
• Innovate, design, and develop new automated equipment utilizing robotic applications for the production of sewn products for a world leading manufacturer
• Design mechanical and electrical upgrades and improvements for production equipment utilizing in-house design as well as outside contractor partners for the design and fabrication of equipment
• Determines feasibility of competing design options - considering costs, time limitations, planning, manufacturability, reliability and other technical and economic factors - some of which may involve innovative or new design approaches
• Analyzes product test data and reports to determine if designs meet functional and performance specifications. Provides technical remediation guidance and support
• Employs advanced mathematics to problems in Engineering. Studies technical and industry publications to keep abreast of industry trends and developments in technology. May prepare and/or present technical papers
• May lead small cross-functional team in the completion of technology projects; assists in the development of project schedules, costs, resource plans, risk assessments and determination of key project deliverables
• Lead design from concept to production hand-off including mechanical designs, hardware design, simulation, prototype building, testing, production integration and factory support
• Analyzing and evaluating product application, manufacturability, and performance with regard to price, quality, delivery and safety during the sales cycle and proposal process, including assisting in the development of customer proposals
• Above average mechanical aptitude; possesses significant intellectual curiosity and creativity
• Well-developed sense of personal accountability
• Proficient with 3D modeling software, preferably Solid Works
• Proficient in Industrial PLC programming and industrial electrical layout
• Basic experience in welding, fabrication, machining, and mechanics
• Bilingual English & Spanish preferred
• Become familiar with Trane Commercial Chillers, Rooftops, and Air Handler products
• Develop control box layout designs, wire harness routing and transformer load calculations
• Develop laboratory test plans and analyze test data
• Develop and/or update Trane electrical purchased part engineering drawings and standards
• Provide engineering support to the Product Planning and Technical Support Team
• Support the Order Fulfillment teams as needed to address safety, assembly and quality issues
• Bachelor's Degree in Electrical Engineering or Electrical Engineering Technology required
• Strong interest in HVAC applications and operating conditions for refrigeration equipment
• Knowledge of the appropriate product safety and design standards; including but not limited to UL/CSA 1995, UL508, UL508A, National Electric Code, ANSI Z21.47, ASHRAE 90.1, etc
• Basic experience with 3D-CAD applications such as ProE is a plus but is not required
• Six Sigma Green Belt or Lean Six Sigma trained or certified a plus but is not required
• Conducting performance tests and stress analyses
• Creating layouts, sketches, and blueprints
• Application of research to the planning, design, development, and testing of mechanical hardware/components (specifically airfoils and forged disks)
• Building finite element models
• Optimize designs for cost, weight, and performance
• Develop process and methodology improvements
• Research, design, and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of energy
• Previous Engineering internships preferred
• Firm grasp of engineering fundamentals
• Communicate with customers to accurately determine their requirements and the best solution
• Collects, analyzes and interprets performance and cost data
• Designs and develops components, subassemblies and simple circuits
• Select electrical components and design circuits, assemblies, or product options
• Help define new software algorithms for process control components
• Integrate new or revised control systems into the products
• Develop unit and system schematics, electrical bills of material, and electric panel layouts
• Follow recognized agency standards for design and testing practices
• Initiate lab test requests, guide technicians, evaluate and document results
• Develop test simulators that reproduce product and system schematics
• Support Marketing and Production with generation of electrical literature and serial tag data
• Create new and revised purchased part, fabrication, assembly or schematic drawings using CAD system
• Enter drawings and bills of material into computerized documentation system
• Issue Engineering Changes and Deviations to release permanent or temporary designs
• Work with local and remote plants to implement designs into production
• Some working knowledge in required engineering activities
• Good planning, organizing, documentation and communication skills and must also be team oriented
• Bachelor’s degree in Engineering or minimum eight years professional experience
• Designs components or portions of a functional system to develop or improve products and facilitate manufacturing operations
• Coordinates with other organizations that are affected by the design development
• Bachelor’s degree in Mechanical Engineering, Systems Engineering, Aerospace Engineering, Computer Engineering, or a related area
• The ability to obtain and maintain a Department of Defense Security clearance (U.S. Citizenship is a prerequisite of this)
• Ability to prioritize multiple responsibilities and/or accomplish them simultaneously
• Familiar with Microsoft operating systems
• Familiar with using Siemens NX in a Teamcenter environment
• Familiar with Adobe Acrobat Professional
• Experience with Department of Defense programs
• Familiar with Information System for Engineering (ISE)
• Design and develop complex models or simulations and apply advanced computational analyses, programs, or analytical techniques to effectively meet requirements and resolve problems
• Act as principal investigator or lead a group of engineers investigating root cause of problems or field failures, developing solutions and preparing related recommendations and reports
• Conduct economic studies and prepare or lead the preparation of specifications, material and design selection, proposals for contracts, licensing and safety documents, and obtain required approvals
• Represent the group in meetings and conferences; interact with customers to resolve significant technical issues and develop related action plans
• Develop 2-D and 3-D models of components and assemblies for prototype, production and retrofit builds, using state of the art CAD (preferably Creo by PTC or equivalent) and PLM systems (preferably Windchill or equivalent)
• Bachelor's degree in Electrical or Mechanical Engineering
• Experience developing electro-mechanical products (preferably with medium to high voltage power transformer bushings)
• Excellent understanding of tolerance stack-up analysis, statistical and worst-case
• Excellent understanding of design robustness, Z-Scores, and Design-for-Excellence techniques (Design-to-Cost, Design-to-Manufacturing, Design-to-Assy)
• Proficiency in the use of Pro/Engineer Creo 2.0 CAD software (min) and knowledge of Pro-E PDMLink 10.2 is required. Experience with AutoCAD Inventor Design tools is a plus
• Current or previous experience with SolidWorks 2015, Design tools is a plus
• Knowledge of drafting standards, geometric dimensioning and tolerancing (ANSI Y14.5M) is needed
• Familiarity with Windchill database management, change control process, & material properties
• Tooling design experience, manufacturing and machining techniques is a plus
• Knowledge of 3D printer solid modeling usage is a bonus
• A bachelor's degree in an engineering discipline, preferably mechanical or manufacturing engineering, or equivalent is necessary
• Proficiency in the use of Pro/Engineer Creo 2.0 CAD software (min) and knowledge of Pro-E PDMLink 10.2 is required. Experience with AutoCAD Inventor and Altium PCB Design tools is a plus
• Current or previous experience with SolidWorks 2015, SolidWorks Enterprise PDM and Mentor Graphics DX Designer PCB Design tools is a plus
• Familiarity with Windchill database management, change control process, material properties, manufacturing and machining techniques
• Tooling design experience is desired
• A bachelor's degree in an engineering discipline, preferably mechanical or manufacturing engineering, is necessary
• Technical education (KY/YH) in design/CAD or higher
• More than 3 years engineering experience of mechanical design from automotive industry
• Very skilled in CAD-design (Creo design and packaging)
• Good ability to communicate and work with people at different levels
• Experience from work in a global environment
• Deliver complete product design solution/manufacturing processes as part of the phase-gate process
• Provide design support for current production products
• Review engineering changes and new product designs, estimate cost (materials, labor, and tooling) to purchase and/or manufacture parts, and generates Capital Expense Request
• Provide processes and equipment that will insure products with the highest level of quality possible. Develop systems that are self-regulating and require minimal subjective analysis
• Recommend product / process improvements by initiating Engineering Change Requests (ECR's) implements such improvements immediately through use of the Deviation process
• Bachelor's Degree in Mechanical Engineering and at least 3 years of relevant work experience is required
• Analysis and simulation of complex systems
• Correlation of analysis to testing
• General design and drafting principles
• 3D modeling and finite element knowledge preferred
• Must possess good electrical and mechanical aptitude, knowledge of advanced mathematics and stress analysis of mechanical systems
• Participate in design and development of truck components
• Utilize Creo Parametric to create optimized parts, investigate layout options, create assemblies of complex designs and develop serviceable breakdowns
• Release detailed component drawings to convey requirements
• Utilize Mentor Graphics to create service variations of wiring harnesses
• Create Engineering Change Notices to document service level component requirements
• Perform freedom to operate investigations related to the development of truck components
• Make use of PACCAR systems to manage implementation of project scope, schedule, budget and functional requirements
• Assist in product change risk assessment in support of aftermarket product substitutions
• Work closely with multiple PACCAR divisions
• Manage multiple priorities and goals simultaneously
• Bachelors in Engineering or related field required; Masters in Engineering or related field and PE license preferred
• Two or more years’ industry experience in field related to degree
• Experience with Creo Parametric or similar 3D modeling software
• Experience in wiring design using Mentor Graphics and knowledge of DC power distribution, management, protection, fusing and routing systems, practices and tools desired
• Ability to manage time and resources, and a familiarity with project management methods and tools
• Excellent analytical and interpersonal skills. Outstanding verbal and written communication skills with multiple business divisions and personnel levels
• Ability to communicate complex concepts or data in a simple-yet-accurate manner
• Understanding of design for six sigma methodology and GD&T
• Competent with personal computer software such as word processing, databases, and spreadsheets
• Requires independent judgment and effective decision making skills while working in a team environment
• At least 2 professional years experience in the following skill areas
• Experience with working on several Projects simultaneously, within budget and schedule
• Experience with planning and organizing meetings to accomplish on-time and on budget projects
• Experience using the government systems (JEDMICS, Organic Change Management (OCM))
• Experience with
• BE Degree in Chemical Engineering or equivalent from reputed engineering institution
• The ideal candidate would have 6-10 years of experience with a reputed design firm — with similar background, like UOP
• 6+ years of relevant work experience in process design industry, preferably in refinery or petrochemical industry is desirable
• Prior process understanding for Refinery and Petrochemicals industry is a major advantage
• The job involves close co-ordination with other global engineering offices and also requires working as a part of virtual-teams, consists of team-members spread across the globe
• Good communication skills, including fluency in English are essential
• Play an active role in operating CAD (Catia and Unigraphics)
• Take a lead role by acting as a Project manager on specific major projects as directed by the Engineering Manager
• Be a first line answering service for all customer technical questions
• Provide full technical proposal responses against customer technical specifications
• Undertake special tasks as requested by the Engineering Manager
• Determine if existing product will satisfy a new application
• Develop and maintain project plans using MS Project for allocated tasks
• Utilize PROLaunch for all new product development as appropriate
• Ensure that any cross-reference system between the customer and Eaton is up-to-date
• Compile qualification/development test schedules and reports when required
• Chair and report on any technical meeting during the definition phase of a project or job
• Help prepare maintainability, reliability and provisioning data for customer needs
• Support Design /Manufacturing Engineering in the resolution of application/specification issues with product/process
• Be the main link with technical members of other Eaton divisions, in the resolution of application/specification conformance issues
• Compile and maintain track of product eligibility
• Support Sales Engineering and visit customer to conduct trial installations and offer technical expertise/solutions
• Play a lead role in understanding and using SSDD (Six Sigma for Design and Development) tools during the lifecycle of the product
• Provide assistance to internal customer regarding Enovia issues
• Design signatory – checking drawings
• Provide design approval documentation when required
• Ensure Eaton’s design procedures are followed throughout the design cycle
• Support Manufacturing Engineers in resolving design related process problems
• Support Quality personnel resolve quality problems where design non-conformance is involved
• Development Work
• Liaise with all global Eaton functions necessary to manage and complete project work
• Assist in the planning of engineering project work and be responsible for staying within plan and budget on own projects
• HNC or HND, level 7 diploma or BA degree preferred
• Mechanical engineering background and experience
• Hydraulic experience is an asset
• Experience with Catia is a must
• Unigraphics, Enovia is nice to have
• Excellent interpersonal skills: creative thinker and strong communicator
• Sound teaming skills
• Manage and lead all phases of the footwear product development process, from initial concept, through final confirmed prototype samples, to confirmation for commercialization
• Anticipate potential challenges, plan accordingly, find effective solutions to ensure accurate and timely delivery within costing parameters, performance expectations, and design for manufacturability
• Build and maintain clear communication channels with both internal partners and the customer
• Responsible for all development stages, oversight of prototype/sample building, associated test & reliability testing, and all deliverables back to the customer and into the MP facility
• Ensure continuous product and process improvement – emphasis on quality and timely delivery of performance product
• Will function as the Lead developer for each new product model, from initial concept, through prototype sampling stages, to final handoff & launch to mass production
• As a passionate and dedicated Performance team member of Server performance team, you will participate in next generation SoC/IP micro-architecture feature exploration, modeling and analysis for various markets
• Micro-benchmarking, Analyzing and tracing various benchmarks, workload characterization, competitive analysis on various hardware platforms, identify bottlenecks and propose feedback solution for performance improvement
• Able to work successfully both independently and on a team
• Creative thinking and ability to think outside the box
• Well organized, attentive to details, and able to meet demanding deadlines
• MS in related field with performance analysis experience
• Familiarity with high-performance computer and interconnect architecture
• Experience working on RTL pre-silicon design (coding or debug) of memory subsystems
• Experience in scripting languages (e.g. Perl or Python or Ruby)
• Experience in hardware/logic simulators (e.g. VCS or NC-Verilog)
• Experience in Verification languages (e.g. Specman or System Verilog or UVM)
• BS degree in CS / CE / EE or equivalent with a minimum of 2 years of experience
• An internship working with FPGA’s
• Internship or university class experience with RTL design such as Verilog, VHDL
• Internship or university class experience with Scripting in Tcl, Perl, and Python
• Internship or university class experience with Programming in C++
• Design and develop new products (NDP) as required and manage the development process through to completion which includes in assist in component/ material sourcing
• Design and develop enhancements / continuous product improvement (CPI) to the existing product range
• Analyses product designs, both new and existing, recommending product improvements for cost saving, quality, performance, reliability, durability, etc
• Build prototypes, products, and systems for testing; set up and run laboratory simulations
• Creates engineering drawings and process drawings using 2D and 3D design tools
• Evaluates designs using FEA software and analysis tools .Apply project management tools PDE and NPD gates in carrying out the assign project
• Support other departments where required on issues of a technical nature
• Provide technical support for customers, which may involve site visits of both a national and international nature
• The production of, and maintenance of technical documentation as required , including CAD drawings, costing data, technical construction files, design calculations, bills of materials, technical specifications, marketing literature, test data etc
• Ensure that products meet all mandatory legislation
• Constant interrogation of product design to identify and implement cost savings and performance improvement
• Create and update the BOM and made available in an accurate, relevant and timely manner
• This position will require interaction and communication skills to work well with Supplier, manufacturing operations, sales, marketing and purchasing team members to ensure achieving project timeframe
• Strong CAD skills are required and the jobholder will have demonstrable results in analytics, project management and cost reduction initiative
• Proactively communicates
• Cultural awareness
• Ability to efficiently organize and manage multiple priorities
• Attention to detail is essential at all times to ensure the highest standard of customer satisfaction
• Bachelor’s in degree in Mechanical or design engineering
• Minimum 1 year in similar Engineering or Technical Design role within a manufacturing environment
• Ability to communicate clearly in English , any further language is an advantage
• Provide mechanical design for both elevators and escalators
• Perform in team environment with engineers
• Resolve problems of products working with manufacturing and service personnel
• Develop and recommend changes if any for manufacturing processes
• Reduce product cost and improve design performance working with other groups on value engineering initiatives
• Assist moderately complex engineering assignments
• Prepare engineering drawings
• Utilize engineering field computer applications to read and interpret blueprints
• Provide technical guidance to management if required
• Develop and maintains relations with individuals and business units within or outside his/her organization
• Excellent problem solving and time management skills
• Good mechanical aptitude and knowledge
• Knowledge of electronic equipment and computer hardware and software
• Self motivated and highly organized
• Proficient in Auto CAD modeling
• Design of lighting control solutions in line with project specification
• Providing full technical support to sales team and customers
• Liaison with Ex-Or sales team and external customers for all technical and design queries
• Interpretation of building electrical specifications and electrical lighting layout drawings to develop a lighting controls solution using a range of Ex-Or products
• Creating AutoCAD scheme proposals and bill of materials
• Produce schematic diagrams as required for assistance to gaining specification
• Provide full telephone technical support to customers and sales team
• Assisting external electrical contractors with wiring requirements
• Provide customer facing design expertise where required
• Value engineering solutions to meet contractor budgetary targets
• Support integration of BMS synergies within organization
• Support business in developing training material for continuous improvement projects
• Maintaining SalesForce.com database to support project engineers
• Produce in a timely manner, high standard and accurate quotations
• Actively support HOS deployment for continuous improvement to maximize efficiency
• Generate design and detailed engineering deliverables for a particular engineering discipline
• Produce or modify engineering deliverables for equipment, systems or installations for low to medium complexity engineering assignments
• Translate conceptual designs into detailed engineering documentation including drawings and calculations
• Create engineering drawings, specifications and plans through the application of standard processes
• Contribute to design reviews and design verification and present it for approval
• Follow work plans and cost estimates and deliver the agreed program on time, on quality and at targeted cost
• Use standard processes and tools including 2D drafting and 3D modeling software packages and assist in developing new methodologies
• Experience in Electrical, electronic & mechanical design of surge protection and associated equipment
• Background in electrical power systems, industrial power electronics & power design
• Product knowledge – Listed and Component type Surge Protective Devices (SPDs)
• Computer proficiency in Microsoft Word, Excel and Outlook
• Software writing, CAD design and PCB (printed circuit board) design preferred
• BS Electrical or Electronic Engineering Degree
• 3+ years related design experience
• 1 year of experience working with surge protection components (MOVs-Metal Oxide Varistor, Transorbs, Gas Tubes)
• At least 1 year electrical/electronic manufacturing experience
• Background in industrial, military, utility, or aerospace power electronics preferred
• Successful completion of four-years of high school, or equivalent, plus completion of four years of college with a bachelor’s degree, preferably with a focus on Mechanical Design Engineering and Computer-aided drafting
• Over three years and up to five years of experience, or any combination of education and experience that provides equivalent knowledge, skills and abilities
• Experience with mechanical design of manual fixtures and semi-automatic tooling
• Solid modeling experience using Inventor or SolidWorks (or similar design software)
• Strong mechanical aptitude and hand-on experience building fixtures
• Basic pneumatic knowledge, with experience using valves and actuators
• Basic electrical knowledge with experienced wiring AC and DC circuits, PLC’s with NPN and PNP inputs and outputs, and DC motor controls
• Knowledge of PLC programming, I/O logic controls design, building and troubleshooting
• Six Sigma Green or Black Belt (preferred)
• Lean Manufacturing (preferred)
• Developing briefs, feasibility studies and undertakes design and implementation of schemes, projects and programmes for small and medium sized projects as allocated, including drawing using specialist IT Software
• Assisting with the design and supervision of projects, preparation of estimates, working drawings and Contract documents for projects of varying complexity, dependent on the potholder’s grading
• Assisting in obtaining the necessary technical, administrative and financial approvals and in the preparation, supervision and administration of associated consultants’ commissions or contracts
• To lead on projects as allocated
• Assisting with, or carry out condition surveys and site surveys as directed and to assist with, or carry out the preparation of reports on findings. To assist in the introduction of new methods as necessary to ensure efficient use of resources, including taking an active role in promoting best value
• Liaising, where appropriate, with other Agencies and Bodies and inter and intra services to co-ordinate projects, attending meetings as necessary including with commercial scheme promoters
• Be able to assess a variety of existing and proposed highway layouts – including town centre schemes, traffic signals, road safety schemes, route studies, cycle, bus or School initiative schemes
• Assisting in preparing scheme plans to requisite design levels, ensuring they conform to technical and industry standards
• Assisting in design and manage traffic surveys and public consultations to requisite standards produce detailed drawings to technical standards, prepare accurate complex cost estimates and contract documentation
• Investigate the causes of accidents, analyse options and make recommendation for effective remedial measures
• Assisting in Commissioning and managing consultant engineering undertaking design and feasibility work to prepare scheme brief and monitor consultants performance as directed by the team leader
• Assisting with the draft Committee reports which may cover policy issues and to implement decisions arising from them
• Preparing letters of varying complexity, dependent on the post holder’s grading, including assisting with letters on policy matters, proofs of evidence, technical reports, briefs for consultants and other documents of all complexities as may be required
• Maintaining technical and resource records, and undertake research and technical investigations as directed
• Representing the service at public and other meetings as directed, dependent on the post holder’s grading. To liaise and deal courteously with enquiries from members of the public
• Carry out duties with due regard to the Re’s Customer Care, Equal Opportunities, Information Governance, Data Protection and Health and Safety policies and procedures
• Undertake any other duties commensurate with the general level of responsibility of this post
• To assist in the preparation of estimates, the supervision and administration of Contracts and to control any resources allocated ensuring compliance with financial regulations, standing orders and the relevant legislation
• Junior Staff on day to day or project by project basis
• Consultants and contractors undertaking work for Re as directed
• Ability to communicate with people in a friendly and courteous manner, establishing and maintaining effective working relationships with colleagues at all levels
• Confident in dealing with day-to-day performance issues as they arise
• Positive approach to change, implementing new initiatives/procedures and addressing any resistance encountered
• Good organisational skills
• BS degree with a STEM focus and at least 9 years of related experience OR MS degree with a STEM focus and at least 7 years of related experience
• Ability to obtain DoD Secret Clearance required to start
• Ability to obtain Special Program Access required to start
• Minimum 7 years with direct, practical hands-on CAD (AutoCAD, Autodesk, Catia, ProE, NX) design experience
• Minimum 4 years experience in a mechanical test engineering environment
• Minimum 3 years experience working on large-scale structural testing
• Familiarity with Hydraulic system applications in structural testing
• Experience in test design reviews, test reviews, reports etc
• Experience in full-scale airframe structural testing
• Leadership in large-scale structural test environment
• Experience with hydraulic power, actuators, servo valves and systems in load application
• Experience in application of mult-channel load control system - Moog
• Master of Science degree in Engineering from an ABET accredited university
• Five years of seat belt or interiors design and release experience
• Seat belt homologation testing and certification
• Strong understanding of restraint systems - airbags
• Excellent quality, manufacturing and product assurance planning skills
• Ability to resolve conflicting requirements across multiple organizations
• Possess excellent leadership and interpersonal skills
• Strong program management skills
• Familiar with PFMEA, DFMEA, DVP&R, FEA and CAE impact analysis tools
• Experience with CATIA V5 / UNIGRAPHICS
• Good communication, problem solving, computer and presentation skills
• Under proper supervision & mentorship, perform technical assignments associated with various Engineering and Production activities
• Monitor progress, comply with quality, cost & schedule requirements, and maintain detailed logs & records
• Use computer programs to perform various engineering operations, conduct analyses and provide related data & information
• Compile & assimilate data from various sources, conduct routine operations & tests, prepare reports and develop graphics for presentations
• Troubleshoot, problem solve and assist into implementing technical solutions into problems & issues, to support production, product care & development, and implement engineering solutions
• Participate in, and assist engineers involved in a variety of more complex engineering activities & problem solving tasks
• Assignments require application of standard engineering concepts, familiarization with related computer programs like 3D/2D CAD software, and general understanding of the group's operations in order to provide effective engineering support
• Requires ability to work well within a team environment, challenging deadlines, produce results through self & others, and communicate effectively to resolve routine problems
• Bachelor’s degree in an Electrical Engineering or Building Services
• 3-5 years of experience with industrial or commercial mission critical facilities
• Experience reading and interpreting design, equipment and construction specifications and drawings
• Be organized and have the ability to set priorities and meet deadlines and budget
• Understanding of codes
• Possess leadership and problem solving skills
• Ability to research new designs, technologies, and construction of equipment and facilities
• An ability and willingness to think outside of the box to find creative and innovative solutions to reduce costs with no impact on quality, reliability, or maintainability
• Proficiency with AutoCAD or other CAD tools
• Possess excellent communication skills, attention to detail, maintain high quality standards
• Languages: Must be fluent (read/write/speak) in English
• Any other language is an advantage
• Familiarity with high or medium voltage distribution
• Direct experience with data centers and equipment: uninterruptable power supplies (UPS), generators, switchgear, power distribution units (PDU), automatic/static transfer switches (ATS/STS), CRAH, CRAC, chillers, pumps, variable frequency drives, mechanical equipment and HVAC design
• Knowledge of building codes and regulations including Life Safety, IBC, EU, NFPA, NEC, and OSHA
• Previous vendor negotiation and management skills associated with request for proposals (RFP), bids, requests for information (RFI), construction and project execution
• FPGA design, implementation and timing closure using Xilinx, Altera and Synopsys development tools
• Experience with partial reconfiguration flow from both Xilinx and Altera
• Creating detailed documentation for all stages of development
• Strong knowledge and experience in FPGA Design and software
• Strong knowledge and experience in Verilog or VHDL and C++
• Motivated self-starter with leadership skills and ability to effectively work in a team environment
• Excellent problem-solving skills, judgment, and analytical capability, along with follow-up and monitoring skills
• Strong written and oral presentation skills
• Experience in standard bus architectures (AXI, PCIe, DDR) is preferred
• Experience using common lab equipment, such as spectrum analyzers, oscilloscopes, and logic analyzer
• To develop AC/DC electrical system design drawings and production of AutoCAD drawings (as required by Applications Engineer and Product Manager) for use in pre-sales, LCC support and post-sales
• Manage the document library of those designs and drawings that support the business activities
• Co-ordinate and assist with new product and system design, development and evaluation
• Optimise existing electrical product designs as directed by Product Managers
• Comply with all OH&S, Environment and Quality obligations
• Actively promote safety in the workplace
• Work on Initial Products/Fixtures Concept Design and 3D Models/2D Drawings Generation
• Conduct The Analysis Of Design Concept And Trade-Off; Conduct Design Review and Design FMEA
• Work with Product/Project Engineers on Preparation of Engineering Samples Building and Testing
• Work With Lab Technician on Fixture Design, Components Inspecting and Documentation
• Support/Conduct Flow Products’ Label Design & Package Design, BOM Setup and ECN/EWR Process
• Work With Advanced Manufacturing Engineers For Manufacturing Options
• Work With Procurement Engineer For Sourcing Prototype Parts
• Conduct Product Test Plan & Test Specs, Including Design Issues Troubleshooting and Problem Solving
• Coach & Work with Lab Technicians for Design Qualification Tests
• Familiarity with G.O 95, NESC, and PG&E transmission line standards and construction practices
• Familiarity and experience with Transmission Line Engineering tools, i.e. PLS-CADD, PLS-POLE, etc
• Assignments typically require standard solutions
• Under general direction, independently plans work to meet assigned objectives; progress is reviewed for technical accuracy and adequacy in process and upon completion
• Safety: Actively promote safe practices and conduct in accordance with the Corporate Safety policy. Accomplish the department goal of zero injuries & avoidable auto incidents
• Foster team work and innovation
• Embrace new approaches to accomplish our work more efficiently and effectively
• Ensure delivery of high quality design products on budget, on time and on purpose
• Prepare detailed construction drawings and packages for Transmission Line projects using PLS-CADD and MicroStation software
• Ensure Transmission Line infrastructure meets company and industry standards
• Construction Support – Attend field meetings and provide on-site assistance to construction crews
• Quality Control - Provide valuable input in evaluating and cross-checking peers and contractors
• Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline plus 2 years of relevant experience, or a Master of Science degree in a STEM field plus 0 years of relevant experience
• Working knowledge of ASME Y14.100 principles and practices
• Working experience using Siemens NX (Unigraphics) CAD software
• U.S. citizenship with the ability to obtain and maintain a Department of Defense (DoD) security clearance
• Experience preparing engineering bills of materials
• Be a good team player
• Have good verbal presentation skills
• Have experience working with Creo Parametric (formerly Pro/Engineer); ideally surface design
• Have experience with automotive production processes
• Have good time management and planning skills
• Design, develop and launch heavy-duty truck body systems in the Cab Structures group
• Utilize Pro/E to create complex assemblies that meet both structural and aesthetic goals
• Work with internal and external organizations to validate the designs
• Utilize PACCAR and industry systems to manage the product implementation process, track costs, and support new product introductions
• Develop and maintain a clear understanding of plant and supplier processes in NGP cab structure modules
• Apply creativity to design tasks and propose innovative approaches to standard work
• BSME required; Masters degree in business or engineering and P.E. certificate preferred
• 3+ years industry-related background in the design and specification of automotive or outer body systems
• Advanced proficiency using Pro/E or other solids modeling software required
• Ability to perform and/or lead development efforts on design techniques including Design for Six Sigma, Six Sigma, Pro-E and specific technical competencies
• Working knowledge of GD&T principles
• Competency in the use of personal computer software including project management tools, word processing, spreadsheets, and databases
• Willingness to learn and make use of new engineering processes and techniques
• Experience solving complex technical problems
• Past experience in product development and new product implementation
• Candidates should have a willingness to grow personally and professionally and a demonstrated ability to lead a small team to timely objectives
• Design prototype components and assemblies for new high voltage circuit breakers
• Perform mechanical & electrical stress calculations, as well as thermal analysis, on new and existing designs
• Create 3D models and drawings of components & assemblies
• Maintain clear reporting discipline that facilitates collaboration with team members on multiple locations around the globe
• Conduct engineering design activities and complex analysis to develop recommendations based on sound engineering practices
• Evaluate impact of designs on manufacturing costs and maintain close control of such costs
• Demonstrate multi-tasking skills by working on small projects and prioritizing workload to meet deadlines
• Elaborate / present monthly design progress and financial reports on assigned tasks
• Bachelor’s Degree in an Engineering-oriented discipline
• 2 years of professional experience working in the design of Dead Tank Breaker Power Products
• Bachelor's degree in Mechanical Engineering (e.g. BSME)
• Strong experience working with Product Development, Design, and/or R&D
• Experience working with development of DTB and/or other Circuit Breaker products in a manufacturing environment
• Strong proficiency working with Creo CAD Tools (a/k/a PTC Creo Elements/Pro, Pro/Engineer, Pro-E, etc.) – the ideal candidate is proficient with utilizing Creo for both 2D drafting and 3D modeling
• Experience with Windchill (PDM Link) and SAP
• Responsible for the technical development of part of a job (requisition) or part of a new project (NPI)
• Use of design tools (like 2D / 3D CAD (AC / ProE / UG), Excel, and in-house design calculations, 3D scanning equipment)
• Bachelor’s degree in Mechanical, Aeronautical, Civil, or Electrical Engineering is preferred
• Prior experience as a Designer with at least six full projects successfully completed is preferred
• Knowledge of using design CAD tools and demonstrated experience in use
• Ability to understand and implement design lay-outs for overall assemblies and applying drawing standards
• Ability to work in teams and achieve targets
• Strong detail focus
• Ability to work in a global environment
• Six Sigma training is preferred
• MS in Electrical Engineering or equivalent with a minimum of 8 years of experience in analog mixed signal design with emphasis on high speed design
• Direct experience with IO design for memory interfaces, programmable IO design, design of DLL with de-skew circuits and putting them in HVM is must
• Expert level in analog/mixed signal circuit design flow using cadence environment, Supervise mask designers to deliver high quality layout with emphasis on quality and execution and meeting design goals on time with minimum iterations
• Able to run all the flows and providing collaterals for SoC integration
• Experience with bump planning and power grid planning, ESD requirements for high speed pins, power delivery analysis
• Well verse with pin interface timing budget and Signal/power integrity issues
• Comfortable with scripting languages such as Perl, Python, Tcl, etc
• Good communication and presentation skills to enable cross functional interaction
• Role model “can do” attitude
• Knowledge of local requirements for machine design
• Collaborative nature and strong sense of teamwork
• Effective communication skills
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline plus 5 years of relevant experience, or a Master of Science degree in a STEM field plus 3 years of relevant experience, or a PhD in a STEM field with 0 years of experience
• Have a strong working knowledge of ASME Y14.100 principles and practices
• Have strong working experience using Siemens NX (Unigraphics) version 7.5 or higher CAD software
• Extensive Rolling Stock Engineering experience, preferably in the design and project delivery environment
• Experience managing senior level stakeholders
• Knowledge of train control systems
• Knowledge of Integration requirements
• IP train systems knowledge an advantage
• Minimum Ba degree or equivalent
• Passion for advanced innovation, product creation and 3D technology
• Advanced 3D modeling skills allowing you to utilize software tools to manipulate and perfect complex surfaces
• Ability to analyze complex problems, develop innovative solutions, thrive within ambiguity and changes in priorities
• Ability to apply athletic knowledge and insights in creating new cushioning components
• Ability to simultaneously handle multiple competing projects
• Ability to communicate complex technical topics to diverse audiences
• BS Degree in Mechanical or Manufacturing Engineering, including 1+ years’ experience in mechanical design or engineering, or other similar function
• Proficient in parametric CAD, including SOLIDWORKS and other 3D CAD surfacing software
• Knowledge of plastic or foam part and tooling design
• Knowledge or experience in thermoforming is a plus
• A portfolio of work, with clear examples of problem solving ability
• Some lifting of tooling, parts and various equipment (up to 50lb)
• Ability to travel domestically on occasion
• Computer-aided design
• Design studies and analysis
• Research and development
• Specification preparation
• Configuration management and document control
• 5+ years of experience in the areas of system design, engineering, and integration
• 3+ years of hands-on experience in direct execution of major efforts in the translation of a system, subsystem, program, project, or activity concept into a preliminary and detailed design, performing risk identification, analysis, and mitigation, and then integrating the various components to produce a working prototype or model of the system
• DHS experience
• Requires at least 4+ years of industry experience
• Experience with FPGA IP and system level design
• Strong Verilog/SystemVerilog coding skills
• Hands-on experience of Static Timing Analysis closure
• Working level mastery of UNIX based design environment, industry standard digital design tools and scripting ability in Perl and TCL
• Experience in High-Speed Serial IO protocols (Ethernet, PCIe, CPRI etc) and transceiver is an added advantage
• Possess the ability to collaborate under aggressive schedule and the desire to take on diverse challenges
• Architect and RTL design for IP based on device specification
• New product release and rollout support
• Verification with simulation tools and hardware development kit
• Design systems according to the customer specifications and GUTOR processes and standards
• Conduct technical studies and review together with Project Manager/Project Engineer in order to make sure that all client specifications are strictly met
• Produce required design documents for customer's approval, including schematic drawings, technical datasheets, design calculations and others
• Responsible for all design related activities to the project, including preparation of bill or material (BOM), production documents, test documents and others
• Liaise with Project Manager/Project Engineer for on time engineering mile stones according the project schedule
• Preparation of drawings & responsible for correctness of drawings
• Provide inputs for manual preparation & responsible for correctness of manuals
• Handle multiple projects in parallel
• Degree in Electrical & Electronic Engineering or equivalent (Master / Bachelor)
• 2 – 5 years of experience in electrical engineering design within the oil & gas, power or petrochemical section would be an added advantage
• Fresh graduate are also welcome to apply
• Fluent in English (written and oral)
• Ability to work in an international and multicultural environment, liaising with HQ in Switzerland
• Good Interpersonal skills
• Initiative to acquire knowledge and skill to continuously improve job performance
• Ability to handle several projects in parallel
• Experience with Autocad would be an added advantage
• Basic experience with uninterrupted power system (UPS) design
• Achieves program objectives through creating win-win solutions and fostering teamwork
• Monitors against cost, schedule, performance and modifies project as needed
• Conveys the business purpose/technical element of the report in a clear and concise manner
• Contributes innovative ideas to support positive business results
• Demonstrates capability to take risk and challenge others in various situations
• Establishes key relationships with people outside one’s area
• Promotes ideas with confidence and provides facts in straightforward manner
• Listen to others and communicates in an effective manner showing confidence about topics especially related to one’s area
• Build an agile network and promote synergies mainly in own area
• Solves defined, complex problems in own and related fields, applying appropriate problem solving techniques; breaks problems down into manageable parts
• Evaluates the risks, benefits and technical implications of different options within own and related fields
• Reaches pragmatic solutions by applying own practical experience and that of others; extrapolates from available data to draw conclusions
• Understand various features, applications, and advantages of The offer catalog
• Contributes to generation of technical specifications for a product line using the inputs from customers, voice, survey, historical, internal product experience
• Identifies the differentiating features according the customer typology and life cycle
• Rank the features according the values and the willingness to pay from customer
• Assesses the feasibility and technical risks to achieve the performances
• Understands various WW standards features, and constraints for the Lob offer catalog
• Interprets the standards for generation of technical specifications
• Assess the standards impact for optimizing feasibility and reduce technical risks to achieve the performances
• Identifies the standards features which can create differentiating advantages against competition
• Define the verification and validation features and sampling
• Ability to shape the future of our technologies and to lead techno plans
• Delivers technical solutions, including innovation and patents to optimize the cost by function
• Utilizes the knowledge of competition to differentiate Schneider products
• Creates/directs verification plans in line with existing standards and applicative customers’ needs
• Can understand and apply MS&A methods and tools for validation or system level modeling and simulation with established methods /protocols or configured tools
• Bachelor Degree in Mechanical Engineering or similar field
• Proficient in the use of 3D solid modeling and detailing tool
• Experience with Pro/Engineer Wildfire 4.0 or higher
• Able to use basic MS Office applications
• High attention to detail is expected
• Minimum of 3 years’ post-college industry experience plus 1 year of relevant design experience
• Ability to work under tight deadlines and pressure upon to business need
• Exposure to product design & development, quality, value engineering
• Understanding of drafting standards and document control procedures
• Understands and utilizes basic mathematical concepts
• Ability to use standard measuring tools
• Effective organizational and communication skills
• Manufacturing knowledge of stamping, molding, machining, casting, & assembly processes and tooling
• Previous experience working with Electrical Equipment
• Previous experience working with Bill of Materials (BOMs)
• Sheet Metal Design (Enclosures)
• Stamped Parts
• Molded Parts Design
• Product parts and materials knowledge
• UL or CSA experience
• Communicate with customers seeking information on type, size, and dimensions of requested HVAC products
• Generate quotes and process job orders and special components
• Create 2-D/3-D computer models of proposed commercial product components generated from customer e-mails, faxes, and via telephone
• Generate new/special product drawings and prepare revisions for current product drawings
• Respond to information requests from Engineering and Architectural companies concerning proper applications and equipment functionality of products
• Analyze customer and product issues and recommend changes as necessary
• Create and edit bills of materials based on customer request
• Knowledgeable & resourceful in knowing applicable product codes and standards. Examples are
• Mechanical Engineering Aptitude: Associates or Bachelor’s degree (Bachelor’s preferred)
• Knowledge of Microsoft Office and AutoCAD. AutoCAD Inventor preferred
• Proficient written and oral communication skills
• Ability to develop relationships with employees and customers
• Ability to process heavy flow of extremely detailed work in timely manner
• Excellent problem resolution and analytical skills
• Compliance with company ethics policy and other regulations, and comply with related quality requirements
• Support and participate in the EHS culture creation, comply with and execute related EHS regulations
• Participate in product layout and modelling design, BOM design, execute design rules
• Work closely with other related team to complete product 3D model and drawing design, and be responsible for design quality
• Working closely with other related team to solve the design issues
• Comply with 3D model and drawing rules to ensure the consistence between pdf drawing database and Intralink database
• Take the responsibility on checking drawing, and summarize the issues, take the actions to improve design quality
• Strong mechanical product design and drawing making experience Required( Preferred on Air-conditioning)
• Strong Computer Skills (Pro/E, AutoCAD, MS office, Etc.)
• Excellent Ability of communication and problem solving
• BSME and/or 7+ years experience in automotive interiors
• Floor Console design and development expertise
• Advanced Catia V5 solid modeling, surfacing and drafting skills and experience
• Knowledge of plastic part design for injection molding
• Knowledge of Injection Mold Tooling (gates, parting lines, action, etc.) as it relates to part design
• Plastic resin and materials selection knowledge as related to Floor Consoles
• Dimensional management and tolerancing experience. Ability to develop component and sub-assembly GD&T tolerancing and tolerance stack-up studies in support of manufacturing & craftsmanship goals
• Ability to communicate in a professional and respectful manner in a team environment. Identify and address issues in a direct, “data driven” manner
• Ability to manage multiple tasks simultaneously
• Self motivated and enthusiastic
• Participation in the definition of the validation plan bogie, in collaboration with the Engineering
• Specification / production / count test online (measure of comfort / stability / thermal / stress / brake / vibration) on trucks and / or rail cars
• Specification / achievement / skinning stationary tests (characterization of mechanical components, calibration)
• Monitoring of individual certification tests on safety aspects
• Production of design solutions for UK Rail Bridges and Structures projects including analysis, production and checking of design drawings, specifications, design reports and CDM risk assessments
• Working to technical quality standards and delivering projects to time and budget
• Supporting and guiding junior level staff within the team
• Liaising with UK based customers in a responsive and client focused manner
• Following internal processes and participate on their development
• Proficient user of 3D cad for industrial design (both 3D/2D), preferable CATIA
• Fluent in English, both speaking and writing, expected level B2 - intermediate
• Experienced in design of engineering components, both 2D & 3D, dimensioning, geometrical
• Knowledge of casting, machining and assembly processes
• Ability to perform Stack-up and built assembly layouts
• Experienced with structural mechanical calculations or Flow CFD
• Knowledge of Six sigma, Quality management and lean process
• Knowledge of turbochargers design is a huge advantage
• Customer oriented approach
• Strong communication skills and team player
• Willingness to learn and positive mindset
• Experienced in design of engineering components, both 2D & 3D, dimensioning, geometrical dimensioning & tolerance. Preferebly in automotive industry
• Proficient user of 3D CAD for industrial design (both 3D/2D), preferable CATIA
• Ability to perform basic structural simulation per given tepmlates
• Strong analytics skills
• Fluent in English, both speaking and writing, expected level intermediate – B2 (CEFR)
• Bachelor Degree in Engineering or eight (8) years of equivalent hands-on experience
• Must have eight (8) years or more automotive experience
• Must have eight (8) years or more design experience with wire harnesses
• Expertise in CATIA V5, Teamcenter, and Unigraphics NX needed
• Must have excellent communication (verbal & written), presentation, interpersonal, and customer service skills
• Must be willing to travel 10% or more locally as needed
• Experience with Mentor Graphics desirable
• Knowledge of Capital Harness System desirable
• Enrich the creation of meaningful consumer experiences with relevant engineering expertise and knowledge
• Drive technical awareness in design-projects and make design engineering comprehensible and relevant to everyone
• Challenge Unilever Design teams on manufacturing capabilities and context
• Proof design solutions with risk analysis, FMEA engineering planning and various prototyping methods
• Working knowledge of predictive tools such as CAE, FEA, and virtual simulations
• Consolidate supply and customer requirements to ensure successful definition and execution of projects
• Support assessment and documentation of design quality while manufacturing
• Support in building and maintaining network with engineering and technology partners
• Collaborate with and guide external partners to solve complex manufacturing systems
• Work closely with Packaging Engineering to identify and understand product specifications, create and validate prototypes
• Support initiation and coordination of feasibility prototypes
• Broaden the horizon of suppliers by driving smart and innovative production concepts
• Ability to conduct qualitative mechanical and engineering analysis
• Cultivate regular and active exchange with supply to make sure manufacturing goes smoothly and to identify potential problem sources
• Support constructive design reviews of design agencies with technical knowledge
• Advise on functionality and manufacturability during down-selecting concepts and design opportunities
• Translate early designs into appropriate CAD models (Siemens NX preferred)
• Daily tasks will include electronic circuit development, PCB Layout design, possibly microcontroller programming, building prototypes, acceptance testing and generation and review of technical documentation
• Generation and review of technical documentation
• Developing circuit schematics and PCB layouts
• Produce and interpret technical drawings (e.g. AutoCAD)
• Modifying and creating operating manuals, production documentation, sales documentation etc for company products
• ATEX accreditation of relevant products
• Installation of new technologies and overseeing early operations
• Deployment/offshore operations where appropriate
• At least 3+ years experience of practical electronics development and manufacture
• Analog and digital electronics design and development experience
• Digital Signal Processing design and development experience
• Be able to visualise how to maximise manufacturability when designing products
• Be accurate, comprehensive, and pay attention to detail
• Be able to produce clear, concise written reports
• Be able to work autonomously as well as in a team
• Be able to work within deadlines and budgets
• Product Design engineer (SIDI), supporting new and existing customers
• Support developmental process; implementing designs
• Liaise with customer and other Hitachi team members to ensure customer requirements are being met according to schedule
• Utilize robust engineering tools such as boundary diagrams, P-Diagrams, and FMEA’s to drive design development
• Determine root cause and implement corrective actions on design and/or manufacturing issues
• Preparation and presentation of reports, both internally and to customer
• Support and implement cost reduction actions for existing programs
• Support the development of automotive sensors, specifically air flow sensors
• Managing assembly drawings, preparing test plans, analyzing test data and preparing customer reports
• Understanding customer engineering specifications, reviewing test specifications, identifying & implementing value added engineering projects
• Support QA to understand root cause analysis of sensors returned by the customer during both the development stage and production
• Communicate with customers regarding engineering specifications and VA activities
• Manage drawings and parts lists for new and current production sensors
• Prepare and review presentation material & test reports to customers
• Manage VA activities as part of the cross functional team for air flow sensor
• Working with customer engineers to ensure that program goals are met, schedules are maintained, and problems encountered during the development and validation are satisfactorily resolved
• Work with other team members to resolve issues related to air flow sensors and air induction systems
• Will occasionally need to travel to multiple global locations to support product development
• Support sales, working cooperatively with Sales pre order to develop optimum designs in response to unusual applications
• Support production team, quality team, sourcing team and field service team on problem solving
• Interacting with suppliers to optimize designs so that they are more cost effective and better quality
• Writing detailed assembly, inspection and test instructions for assembly and quality
• 3+ years related experience. Designing of mixers, vessels or rotary pumps would be preferred
• Design softwares AutoCAD, Solidworks, Familiar with softwares EPDM, TeamCenter would be preferred
• Basic EngineeringTheoretical Knowledge
• Fabrication processes mainly on machining, welding and metal sheeting
• Familiar with ERP system
• Oral and written communication skills in English
• Familiar with Quality Assurance System and QC tools
• Be capable of performing design and analysis of rotating equipment
• Performs diverse engineering activities involving product design and support
• Responsible for the mechanical integrity, function and design of products
• Responsible for maintaining engineering Operation and Maintenance manuals
• Provides engineering product support to the manufacturing and sales
• Provide necessary calculations required on new and existing products
• May produce and maintain standard documentation
• Within the scope of the job requirements, will be required to adhere and comply with state and federal law, the Company Quality Program and procedures, Company policies and Safety and Environmental Regulations
• 3-5 Years Experience in a similar position
• 3 Years Solidworks experience
• Mathcad Experience
• Microsoft Office Proficiency
• Teamcenter Experience
• Excellent written and verbal communication
• Apply technical knowledge to innovate, design, develop and release customised customer-centric designs
• Reduce cost of product and increased production throughput through new design, simplification etc
• Verify designs through quick, valid and accurate engineering analysis
• Design, construct and calculate on assigned projects
• Produce and check Engineering documentation
• Contribute with mounting and testing of prototypes in order to be able to prepare procedures for these activities
• Ensure all deliverables are technically in accordance with client requirements
• Participate in internal design review meetings being aware of commercial implications
• Follow internal Operating Procedures
• Manage the review and respond to client comments
• Report any design changes which may have a cost or schedule impact to the relevant personnel
• Attend, chair and participate in client and internal meetings
• Provide timely and technically acceptable solutions to engineering queries eliciting appropriate support as necessary
• Contribute to training and share your knowledge with your colleagues
• Ensure a high standard of professionalism is maintained and that customer care is foremost
• Maintain a high standard of housekeeping in the work area and department
• Ensure personal compliance with all HSE legislation and HSE Company policy
• Ensure equipment conforms to applicable Directives
• Contribute with mounting and testing of prototypes
• Contribute to the development of systems and improvement in working practices and processes
• Support other departments and carry out other duties as and when business requirements dictate as may be reasonably expected by line manager
• Travel is occasionally required as dictated by project needs
• Degree in Engineering discipline or equivalent preferably Mechanics
• Tertiary education in an Engineering discipline
• 5+ years’ experience of designing mechanical hydraulic equipment
• Design experience of lower completion products
• Computer literacy (including good command of Microsoft Excel, Word, Outlook and CAD modelling software)
• Participating in meetings
• Understanding of engineering documents and drawings
• Working knowledge of FEA and supportive hand calculations
• Proficient in both written and spoken English or Norwegian languages
• Have an understanding of common place industry materials and their application

Related Job Titles

7 Design Engineer Resume Examples & Writing Guide

7 real-world resume examples and a step-by-step writing guide for design engineers. Learn what to include and how to structure your resume to impress employers and land more interviews. Whether you're an experienced design engineer or just starting your career, see how to create a resume that effectively showcases your skills and achievements. Includes expert tips and best practices.

Having a great resume is very important for design engineers who want to get hired. But knowing what to put on your resume and how to make it look good can be hard, especially if you haven't done it before or in a while.

This article will make it easy. It has 7 real examples of design engineer resumes that worked. It also walks you through, step-by-step, how to write each section of your resume - from your contact info at the top, to your skills and work history, all the way down to extra sections that can help you stand out.

By the end, you'll know exactly how to put together a design engineer resume that will impress employers and improve your chances of getting interviews. Even if English isn't your first language, the tips will be clear and simple to follow. Let's get started!

Common Responsibilities Listed on Design Engineer Resumes

• Conceptualizing and designing products, systems, or components based on client requirements and specifications
• Conducting research to identify design opportunities, user needs, and market trends
• Creating detailed design plans, schematics, and 3D models using CAD software
• Collaborating with cross-functional teams, including manufacturing, engineering, and marketing, to ensure design feasibility and alignment with project goals
• Performing design calculations, simulations, and analyses to optimize product performance and reliability
• Selecting appropriate materials, components, and manufacturing processes for product development
• Developing and maintaining design documentation, including technical drawings, bills of materials, and design specifications
• Conducting design reviews and presenting design concepts to stakeholders for feedback and approval
• Overseeing prototyping and testing processes to validate design functionality and identify areas for improvement
• Ensuring compliance with industry standards, regulations, and quality control requirements throughout the design process

How to write a Resume Summary

In the pursuit of writing a professional and pay-attention-to-me type of summary or objective section for your resume, especially as a Design Engineer, several factors must be taken into account. The ballgame involves much more than listing your skills or your past job experience. Let's explore together how you can make that first introductory section of your resume shine!

Understand the Purpose

The foundation of a convincing summary or objective lies in understanding its purpose. It’s the first thing a potential employer will read, and it can set the tone for the rest of your resume. The ideal summary/objective is a glimpse into your professional life, your career goals, and why you're the perfect fit for the position. Therefore, you must phrase it so that it effectively captures these facets of your next career move.

Highlight Relevant Skills

Demonstrating your abilities is pivotal, but remember to focus only on skills tightly aligned with the position you are applying for. If you are a Design Engineer, potential employers would certainly be interested in knowing about your design and analytical skills, your proficiency with CAD software, or your project management capabilities.

Showcase Achievements

Relaying your past successes gives a reflective image of what you're capable of and the value you can bring to a new team or a project. Here, numbers can be your best friends. Discuss key design projects you've led, illustrate how your engineering solutions have impacted businesses, or state figures that show your cost-saving or efficiency-improving contributions.

Clear and Concise

Remember, long-windedness is far from impressive. Your summary or objective should be brief, yet impactful. Aim for three to five sentences that provide an overview of who you are, what you offer, and what you wish to achieve. Use active language and strong, definitive words.

Tailor It for Each Job

A broad, generic summary might overlook the specific needs of the job or organization you're applying to. Dig into the job description, echo their terminology and weave those details into your summary or objective. This indicates an acute sense of attention to detail and that you are an intentional candidate.

Remember that the perfect summary or objective is a harmonious blend of your professional self-portrait and what you see in your near career horizon. It's a mirror image of your dedication and how the job in question fits within that dedication. That’s your mark of excellence in a resume - a professional, concise, achievement-filled portrayal of yourself as a Design Engineer.

Lastly, put yourself into the shoes of a hiring manager - what qualities would you look for if you were hiring for a similar role? The answer can guide you in creating a crisp, clear, and engaging summary or objective. So put pen to paper, or fingers to keyboard, and let your professional story unfold in that introducible section on your resume! Then watch your dream job get one step closer.

The following section visually illustrates good and bad examples of a summary/objective for a resume.

Strong Summaries

• Detail-oriented Design Engineer with over 5 years of experience in the automotive industry. Expert in CAD software and experienced in creating 3D designs of automotive parts. Known for improving product designs for efficiency and cost-effectiveness.
• Innovative Design Engineer specialising in civil construction projects. Excel in creating technical designs and plans with advanced proficiency in the latest design software. Proven track record in reducing project time lines and improving design quality.
• Solution-focused Design Engineer with a passion for creating eco-friendly architectural designs. Offer creative approach to design strategies, with emphasis on sustainable practices. Highly skilled in using BIM technology and green building simulations.

Why these are strong ?

The examples are good practices because they provide a concise, relevant summary of the candidate's skills, experience and their area of expertise. They also mention their achievements and the impact they’ve made at previous roles. This gives a potential employer an insight of what they can bring to the company. However, it would be a bad practice if they were vague, lacked key details about their capabilities or didn’t align with the job description.

Weak Summaries

• Summary of my career: Have worked on various designing projects and am good at CAD.
• Resume Summary: Hardworking person having experience in dealing with design.
• Profile: Good at designs. Have worked with ABC company.
• Summary: Expert in using software tools for designing purposes. Able to work in team.
• Resume Summary: Engineer good at designs and like to work with fun.

Why these are weak ?

The above examples are poor for several reasons. Firstly, they are all extremely vague and nondescript, with no specific details about their work or accomplishments. They fail to provide any measurements or specifics, such as the projects handled, the technical abilities applied, or the impact made in former roles. They merely state that they have worked on designs, without specifying the level of complexity, the tools used or the expertise level. Moreover, there is also lack of keyword optimization towards the Design Engineer role. In addition, professional tone is not maintained in all. For example, 'Engineer good at designs and like to work with fun' is casual and unprofessional. Good summaries would always involve more concrete performance metrics, specific software or design skills and a brief overview of the key career achievements.

Showcase your Work Experience

Now, let's talk about something that often seems simple but can turn complex very quickly when you get down to it – the work experience section in your résumé. For anyone, regardless of the job they're in or the field they hail from, this is one of the most essential parts of the document. And for a design engineer like yourself, it's no different.

Understanding the Work Experience Section

The work experience section is essentially a run-through of your professional life. It reveals where you've been, what you've done, and most importantly, what you've learned or achieved at each station. When properly realized, it serves as a chronological showcase of your skills, highlighting not just your capacities but also your growth as a professional.

Curating Your Work Experience

First and foremost, the work experience section should be aligned with the position you seek. Each job experience listed should capture transferable skills valuable to a future employer in the engineering design industry. You don't have to include every job you've had. Prioritize including experiences that closely match or enhance the qualifications necessary for the position you are applying for.

Quantify your achievements and impact in each role using specific metrics, percentages, and numbers to demonstrate the value you brought to your previous employers. This helps hiring managers quickly understand the scope and significance of your contributions.

Detailing Your Work Experience

Every job designation that you include in your work experience section ought to be accompanied by a brief description of duties. Try and encapsulate the breadth and depth of your role at each organization and emphasize the impact your work had. Quantifiable achievements resonate well.

Ordering Your Work Experience

Usually, it's a good rule of thumb to present your work experiences in a reverse chronological order. It's recommended to start off with the most recent role and then trace your journey backwards. This allows the hiring personnel to see your current capabilities first.

Facets of a Design Engineer's Work Experience

As a design engineer, aspects that might be essential to feature heavily would be the complexity of the projects you've handled, the scale of these projects, as well as how innovative they've been. Emphasise on software proficiency, technical designing knowledge, ability for rapid prototyping and testing among others.

The work experience section is a lens for hiring personnel to view your potential worth to their organization. It is integral to be honest, specific and strategic while articulating your professional journey. The heart of an impactful professional experience section lies in its details— so choose them wisely!

Strong Experiences

• Spearheaded the redesign of ABC Company's flagship product, resulting in an increase in revenue of 20% over the previous year.
• Collaborated with cross-functional teams on the development of a new wearable tech device, which was subsequently patented.
• Reduced production costs by 15% by introducing a new method of using CAD software for efficient design.
• Awarded 'Engineer of the Year' for my innovative approach to optimizing designs and consistently meeting project deadlines.
• Integrated prototype testing into the design process, reducing product development time by 30%.

These examples are good because they include specific, quantifiable achievements, rather than merely listing duties or responsibilities. This is an excellent practice as it demonstrates the direct impact of the candidate's work and shows their potential value to a prospective employer. Additionally, they also demonstrate teamwork and collaborative skills, widely recognized as essential in engineering roles. Emphasizing the use of industry-standard technologies like CAD software shows relevance and skill in the field.

Weak Experiences

• Used CAD software
• Attended meetings
• Learned about design processes
• Received positive feedback
• Busy at work
• Wore many hats
• Worked with a team
• Designed something

The examples provided above for a Design Engineer's resume are bad practices due to their generality and lack of specifics. They are very vague and do not show any concrete accomplishments or specific skills. For example, 'Used CAD software' does not specify what was achieved, what kind of designs were created, or how proficient the person is in CAD software. 'Attended meetings' or 'Learned about design processes' do not show what the person contributed to the meetings or how they applied the design processes. 'Received positive feedback' fails to give details about what the feedback was for and why it was significant. 'Busy at work', 'Wore many hats', and 'Worked with a team' don't provide any information on the candidate's actual skills and achievements. 'Designed something' doesn't describe what was designed or how the design contributed to the company or project. 'Job tasks' lacks specificity, so it doesn't tell hiring managers anything about what the candidate can do. These examples would undermine the job seeker's credibility and could turn off hiring managers who are looking for clear demonstrations of talent and accomplishments.

Skills, Keywords & ATS Tips

Have you ever wondered how hiring managers choose the right candidate from a pile of resumes for a Design Engineer position? The secret lies in the balance of hard and soft skills on your resume and how you use keywords to stand out from the crowd.

Understanding Hard and Soft Skills

Hard skills are the technical abilities you've learned over time. They're often tangible, measurable, and specific to your industry. For instance, as a Design Engineer, your hard skills might encompass computer-aided design (CAD), mathematical proficiency, and engineering software expertise. They are vital as they represent your ability to perform the essential tasks in the job description.

On the other hand, soft skills are the personal traits and competencies that determine how you interact with others and manage tasks. Communication, teamwork, and problem-solving are examples of these. Even in a technical field like Design Engineering, soft skills are crucial as they demonstrate your capacity to collaborate effectively, present ideas clearly, and find solutions to issues.

The Role of Keywords in Your Resume

Keywords are specific words or phrases that employers look for in a resume. They might be the technical specs, tools, software, or jargon linked to your profession. They are generally extracted from the job description itself. Including these keywords makes your resume more relevant to the role you're applying for.

Remember that many companies use Applicant Tracking Systems (ATS) to filter out resumes that don't match their criteria. If your resume doesn't contain the right keywords, it can be rejected without ever reaching a human. By using the keywords related to the desired hard and soft skills, you increase the chances of your resume being seen by a hiring manager.

Linking Keywords and Skills

The connection between keywords and skills is essential in constructing a strong resume. Incorporate the hard and soft skills, along with the matching keywords, into your skillset description to create a robust section.

Strive for balance by presenting your professional competencies (hard skills) and your interpersonal relationships and attitudes (soft skills), providing a fuller picture of your qualifications.

Meanwhile, keep ATS systems in mind. These platforms rank resumes based on keyword matches. Your document needs the correct matching keywords to ensure it doesn't slip through the cracks.

Remember, the most significant factor is to stay truthful. Never list a skill or a keyword if you do not actually possess it or are familiar with it. Misrepresenting your abilities could lead to problems down the line if you're not able to deliver on what you've promised.

I hope this information has been useful in helping you understand the significance of hard and soft skills, keywords, and their relationship to ATS systems in a Design Engineer resume.

Top Hard & Soft Skills for Full Stack Developers

Hard skills.

• 3D Modeling
• Manufacturing Design
• Technical Drawing
• Product Development
• CAD Software
• Machinery Design
• Prototyping
• Structural Analysis
• Project Management
• Software Simulation
• Design Optimization
• Material Engineering
• Mechanical Design
• Industrial Design
• Quality Control
• Reverse Engineering
• Finite Element Analysis
• Mathematical Modelling
• Computer Programming

Soft Skills

• Communication
• Problem-Solving
• Creative Thinking
• Decision Making
• Attention to Detail
• Time Management
• Adaptability
• Collaboration
• Negotiation
• Critical Thinking
• Self-Motivation
• Conflict Resolution
• Proactivity
• Stress Management
• Organizational Skills
• Reliability
• Interpersonal Skills

Top Action Verbs

Use action verbs to highlight achievements and responsibilities on your resume.

• Implemented
• Coordinated
• Collaborated

Education & Certifications

Adding your education and certificates to your resume as a Design Engineer is straightforward. First, create a section labeled 'Education' where you include your degrees. Write the degree type, university name, and completion date. For certificates, create a separate section labeled 'Certifications'. List them chronologically, including the certificate name, granting organization, and date received. This approach underscores your qualifications with clear, easy-to-read formatting, thereby enhancing your profile's attractiveness to potential employers.

Some of the most important certifications for Design Engineers

Demonstrates advanced skills in using SolidWorks 3D CAD software for design and engineering.

Validates professional-level skills in various Autodesk software, such as AutoCAD, Inventor, and Fusion 360.

Demonstrates proficiency in using MATLAB for data analysis, algorithm development, and numerical computing.

Resume FAQs for Design Engineers

What is the best resume format for a design engineer.

The most effective resume format for a design engineer is the reverse-chronological format. This format highlights your most recent experience and achievements first, making it easy for hiring managers to see your relevant qualifications.

How long should a design engineer's resume be?

A design engineer's resume should typically be one to two pages long. If you have less than 10 years of experience, aim for a one-page resume. If you have more than 10 years of experience or a extensive list of relevant projects and achievements, a two-page resume may be appropriate.

What are the most important skills to include on a design engineer resume?

Some of the most important skills to include on a design engineer resume are: proficiency in CAD software (e.g., AutoCAD, SolidWorks), problem-solving abilities, attention to detail, knowledge of manufacturing processes, and strong communication skills. Additionally, highlight any relevant technical skills specific to your area of expertise.

How can I make my design engineer resume stand out?

To make your design engineer resume stand out, focus on quantifiable achievements and results. Use specific numbers and metrics to demonstrate the impact of your work. Also, tailor your resume to the job description by highlighting relevant skills and experiences. Consider including a brief summary or objective statement to showcase your unique value proposition.

Should I include personal projects or extracurricular activities on my design engineer resume?

Including personal projects or extracurricular activities on your design engineer resume can be beneficial if they are relevant to the position or showcase transferable skills. For example, if you have worked on a side project that demonstrates your design skills or participated in a professional organization related to engineering, these experiences can help set you apart from other candidates.

Design Engineers bring innovative product visions to life through meticulous planning and execution. Their role encompasses analyzing user needs, conceptualizing designs, and rigorously testing prototypes to ensure optimal performance and safety. Key responsibilities include proficiency in CAD modeling, materials selection, manufacturing process expertise, and a keen eye for quality assurance. When crafting a Design Engineer resume, prominently showcase your technical prowess with design software and methodologies. Quantify achievements that boosted efficiency, cut costs, or enhanced user experiences. Crucially, demonstrate your problem-solving abilities through examples of overcoming complex design challenges.

Innovative Design Engineer with a proven track record of delivering high-quality solutions across various industries. Skilled in CAD software, problem-solving, and project management, with a keen eye for detail and a passion for pushing the boundaries of design. Committed to collaborating with cross-functional teams to create efficient, cost-effective, and user-friendly products that exceed client expectations.

• Led the design and development of critical components for Tesla's next-generation electric vehicles, resulting in a 15% increase in overall efficiency.
• Collaborated with cross-functional teams to optimize manufacturing processes, reducing production costs by 20% and improving quality control.
• Conducted extensive research on advanced materials and technologies, leading to the successful integration of innovative solutions into product designs.
• Mentored and guided a team of junior design engineers, fostering a culture of innovation and continuous improvement.
• Presented design concepts and technical findings to senior management, securing buy-in and funding for multiple high-impact projects.
• Contributed to the design and development of advanced aerospace systems, focusing on improving fuel efficiency and reducing environmental impact.
• Utilized CAD software and simulation tools to create detailed 3D models and perform structural analysis, ensuring the integrity and safety of aircraft components.
• Collaborated with suppliers and manufacturers to select optimal materials and processes, reducing overall project costs by 10%.
• Participated in design reviews and presented technical findings to stakeholders, demonstrating strong communication and presentation skills.
• Assisted in the successful completion of multiple FAA certification processes, ensuring compliance with strict industry regulations.
• Contributed to the design and development of innovative consumer robotics products, focusing on improving user experience and functionality.
• Conducted product testing and analysis, identifying and resolving design issues to ensure the highest quality standards.
• Collaborated with marketing and sales teams to gather customer feedback and incorporate insights into product improvements.
• Assisted in the development of product documentation, including user manuals and technical specifications.
• Participated in the successful launch of multiple award-winning consumer robotics products, contributing to the company's growth and success.
• CAD software (SolidWorks, AutoCAD, CATIA)
• FEA and CFD analysis
• 3D printing and rapid prototyping
• Project management
• Problem-solving
• Product development lifecycle
• Design for manufacturing (DFM)
• Design for assembly (DFA)
• Technical writing and documentation
• Presentation and communication
• Cross-functional collaboration
• Mentoring and leadership
• Advanced materials and technologies
• Robotics and automation
• Continuous improvement

A Product Design Engineer is responsible for conceptualizing, designing, and optimizing physical products, ensuring they meet functional, aesthetic, and manufacturing requirements. They collaborate with cross-functional teams, create prototypes, conduct feasibility testing, and refine designs. Creativity, problem-solving abilities, technical expertise, and attention to detail are essential. When crafting a resume, emphasize your hands-on experience in the product design lifecycle, highlighting your technical skills in CAD software, prototyping, and testing methodologies. Showcase your design portfolio, quantifying successful product launches or improvements. Convey your ability to translate user needs into innovative solutions through clear and compelling language.

Innovative and detail-oriented Product Design Engineer with a passion for creating user-centric solutions. Proven track record of successfully leading cross-functional teams to deliver high-quality products from concept to launch. Skilled in various design tools and methodologies, with a strong focus on continuous improvement and efficiency.

• Led the design and development of the revolutionary Apple AirTag, contributing to its compact design and seamless user experience.
• Collaborated with cross-functional teams to integrate advanced Ultra Wideband technology, ensuring precise location tracking.
• Conducted extensive user research and usability testing, resulting in a 95% customer satisfaction rating for the product.
• Optimized the manufacturing process, reducing production costs by 15% while maintaining high quality standards.
• Mentored and coached junior designers, fostering a culture of innovation and continuous learning within the team.
• Contributed to the design and development of the Amazon Echo Dot (3rd Gen), focusing on improving audio quality and device aesthetics.
• Conducted in-depth market research and competitor analysis to identify opportunities for product differentiation and innovation.
• Collaborated with the software engineering team to ensure seamless integration of hardware and software components.
• Developed and implemented design validation testing procedures, reducing post-launch issues by 30%.
• Presented design concepts and prototypes to senior leadership, securing buy-in and resources for project execution.
• Assisted in the design and development of various components for the Tesla Model S, contributing to its sleek and aerodynamic design.
• Conducted finite element analysis (FEA) to optimize product durability and performance.
• Collaborated with the manufacturing team to ensure design feasibility and cost-effectiveness.
• Participated in design reviews and provided constructive feedback to senior designers, contributing to process improvements.
• Assisted in the creation of technical documentation and design specifications for suppliers and internal teams.
• Product Design
• CAD (SolidWorks, AutoCAD)
• 3D Printing
• Finite Element Analysis (FEA)
• Design for Manufacturing (DFM)
• User Research
• Usability Testing
• Cross-functional Collaboration
• Technical Documentation
• Design Validation Testing
• Mentor and Coach
• Continuous Improvement
• Additive Manufacturing
• User Experience (UX)

As an entry-level design engineer, you'll bring fresh ideas to life through hands-on product development. You'll analyze customer needs, create innovative designs, and build prototypes to test and refine your concepts. A bachelor's degree in engineering is a must, along with strong problem-solving and communication abilities. When crafting your resume, highlight relevant coursework, internships, and capstone projects that showcased your technical and design skills. Use concise language to describe how you applied engineering principles to overcome challenges. Quantify your achievements whenever possible to demonstrate your impact. Tailor each resume to align with the specific job requirements.

Innovative and driven Entry Level Design Engineer with a passion for creating efficient and effective solutions. Adept at utilizing CAD software to design and optimize mechanical systems. Possesses strong problem-solving skills and a keen eye for detail. Collaborates effectively with cross-functional teams to deliver high-quality results.

• Assisted in the design and development of aircraft components using CATIA V5
• Conducted finite element analysis (FEA) to optimize component designs for weight reduction and structural integrity
• Collaborated with senior engineers to create and maintain technical documentation
• Participated in design reviews and presented findings to cross-functional teams
• Contributed to the successful completion of a project that reduced component weight by 15%
• Assisted in the design and development of automotive components using SolidWorks
• Conducted tolerance analysis and created GD&T drawings for manufacturing
• Collaborated with manufacturing engineers to optimize designs for production
• Participated in prototype testing and data analysis
• Contributed to the successful launch of a new vehicle platform
• Assisted in the design and fabrication of robotic systems for research projects
• Conducted literature reviews and presented findings to research team
• Developed and maintained MATLAB scripts for data analysis and visualization
• Collaborated with graduate students to publish a conference paper on robotic grasping
• Contributed to the successful completion of a research project funded by the National Science Foundation (NSF)
• Computational Fluid Dynamics (CFD)
• Tolerance Analysis
• Rapid Prototyping
• Technical Writing
• Presentation Skills

A Design Estimation Engineer analyzes project requirements, materials, and labor to develop cost estimates for design projects. They collaborate with designers and stakeholders, ensuring accurate estimates. To apply, create a resume highlighting relevant experience, CAD software skills, analytical abilities, and attention to detail within a 90-word limit.

Highly skilled Design Estimation Engineer with over 10 years of experience in delivering accurate cost estimates and project feasibility assessments for complex engineering projects. Proven track record of collaborating with cross-functional teams to optimize designs and maximize cost-effectiveness while maintaining high quality standards.

• Led the cost estimation and feasibility analysis for a $500M infrastructure project, resulting in a 15% reduction in overall project costs.
• Developed and implemented a new cost estimation methodology that improved accuracy by 25% and reduced estimation time by 30%.
• Collaborated with design and construction teams to identify and mitigate potential cost risks, resulting in a 90% on-time and on-budget project delivery rate.
• Mentored and trained a team of 5 junior estimation engineers, improving their skills and contributing to a 20% increase in team productivity.
• Presented cost analysis findings and recommendations to senior management and clients, securing buy-in for project proposals and design changes.
• Prepared detailed cost estimates for engineering projects ranging from $10M to $200M, consistently delivering estimates within 5% of actual costs.
• Collaborated with design teams to optimize designs for cost-effectiveness, resulting in an average of 10% cost savings per project.
• Conducted risk assessments and developed contingency plans for potential cost overruns, minimizing financial impacts to projects.
• Automated cost estimation processes using Excel and VBA, reducing estimation time by 25% and improving accuracy.
• Participated in value engineering workshops, contributing ideas that led to an additional 5% cost reduction on multiple projects.
• Assisted senior estimation engineers in preparing cost estimates for engineering projects, contributing to the successful delivery of over 20 projects.
• Conducted market research and analyzed historical data to improve the accuracy of cost estimates, resulting in a 15% reduction in estimation variances.
• Collaborated with cross-functional teams to gather requirements and incorporate design changes into cost estimates.
• Developed and maintained a database of historical project costs, enabling more accurate and efficient cost estimations for future projects.
• Participated in professional development training and workshops to stay up-to-date with industry best practices and trends.
• Cost Estimation
• Feasibility Analysis
• Risk Assessment
• Value Engineering
• Cost Control
• Financial Analysis
• Contract Management
• Quantity Surveying
• Advanced Excel & VBA

Hardware Design Engineers are responsible for conceptualizing, designing, and developing computer hardware components and systems. They analyze technical requirements, create detailed schematics, and test prototypes to ensure optimal functionality. When crafting a resume, emphasize your technical prowess, including proficiency in circuit design, CAD software, and problem-solving abilities. Quantify your achievements, such as improving system performance or reducing manufacturing costs. Present your qualifications in a clear, well-formatted manner, and proofread meticulously to ensure accuracy.

Innovative Hardware Design Engineer with a proven track record of delivering cutting-edge solutions for complex electronic systems. Skilled in PCB design, FPGA development, and embedded systems programming. Adept at collaborating with cross-functional teams to bring products from concept to production.

• Led the hardware design for Tesla's next-generation battery management system, resulting in a 15% increase in energy efficiency.
• Developed and implemented a novel FPGA-based control system for Tesla's electric motor drives, reducing latency by 20%.
• Collaborated with firmware and software teams to ensure seamless integration of hardware components.
• Conducted rigorous testing and validation of hardware designs, ensuring compliance with automotive industry standards.
• Mentored junior hardware engineers, fostering a culture of innovation and continuous improvement.
• Designed and developed hardware components for Apple's flagship iPhone and iPad devices.
• Optimized PCB layouts for high-speed interfaces, resulting in a 25% reduction in signal integrity issues.
• Collaborated with industrial design team to create visually appealing and functional hardware enclosures.
• Conducted design reviews and provided technical guidance to contract manufacturers.
• Contributed to the development of Apple's proprietary wireless charging technology.
• Developed hardware solutions for Intel's server and data center products.
• Designed and validated high-speed memory interfaces for Intel's Xeon processor family.
• Collaborated with validation teams to develop and execute comprehensive test plans.
• Investigated and resolved hardware issues reported by customers and internal teams.
• Contributed to the development of Intel's advanced packaging technologies.
• FPGA Development
• Embedded Systems
• Schematic Capture
• Signal Integrity Analysis
• Wireless Communication Protocols
• Microcontroller Programming
• VHDL/Verilog
• SPI/I2C/UART Interfaces
• Altium Designer
• Cadence Allegro
• MATLAB/Simulink
• Agile Methodology

An Instrumentation Design Engineer creates innovative solutions for complex measurement and control systems. They integrate electrical hardware and software to monitor processes with precision. This multifaceted role requires a unique blend of technical mastery - expertise in programming, circuitry design, and instrumentation principles. An effective resume showcases specialized skills through impactful project highlights and quantifiable achievements within the field.

Instrumentation Design Engineer with over 8 years of experience in designing and developing cutting-edge measurement and control systems for various industries. Proven track record of delivering innovative solutions that optimize process efficiency, enhance product quality, and reduce operational costs. Skilled in project management, cross-functional collaboration, and continuous improvement methodologies.

• Led the design and implementation of advanced process control systems for oil and gas clients, resulting in a 15% increase in production efficiency and a 20% reduction in downtime.
• Developed and deployed wireless sensor networks for remote monitoring of pipeline integrity, enabling early detection of leaks and preventing potential environmental hazards.
• Collaborated with cross-functional teams to create customized instrumentation solutions for clients in the chemical and petrochemical industries, securing contracts worth over $5 million.
• Conducted regular training sessions for junior engineers and technicians, fostering a culture of continuous learning and knowledge sharing within the organization.
• Implemented lean manufacturing principles in the design process, reducing design cycle time by 25% and improving overall project delivery performance.
• Designed and developed advanced process control systems for clients in the semiconductor and electronics manufacturing industries, contributing to a 30% improvement in product quality and yield.
• Created and maintained detailed technical documentation, including design specifications, user manuals, and troubleshooting guides, ensuring smooth knowledge transfer and support.
• Collaborated with software engineers to develop and integrate custom control algorithms and user interfaces, enhancing the functionality and user-friendliness of the instrumentation systems.
• Conducted thorough testing and validation of instrumentation systems, ensuring compliance with industry standards and client requirements.
• Provided on-site technical support during system commissioning and startup, ensuring smooth integration and optimal performance of the instrumentation systems.
• Assisted in the design and development of distributed control systems (DCS) for clients in the oil and gas, and chemical industries.
• Conducted detailed instrumentation loop drawings and specifications, ensuring accurate and reliable control system design.
• Performed instrument calibration, loop checking, and troubleshooting during system commissioning and maintenance phases.
• Collaborated with process engineers to optimize control strategies and improve process efficiency and reliability.
• Participated in the development and implementation of safety instrumented systems (SIS), ensuring compliance with industry safety standards and regulations.
• Process Control Systems Design
• Instrumentation and Control Engineering
• Distributed Control Systems (DCS)
• Programmable Logic Controllers (PLC)
• Safety Instrumented Systems (SIS)
• Wireless Sensor Networks
• SCADA Systems
• Process Optimization
• AutoCAD and Electrical CAD Tools
• MATLAB and Simulink
• C/C++ Programming
• Data Analysis and Visualization
• Six Sigma and Lean Manufacturing

Senior Design Engineers lead teams to develop product designs and oversee the development process. Their role involves analyzing requirements, creating models, testing prototypes, and collaborating across teams. For resumes, highlight technical skills, software expertise, project management experience, and significant achievements. Use clear formatting, quantify accomplishments, and tailor content to the job description.

Innovative and detail-oriented Senior Design Engineer with over 15 years of experience in product development and design optimization. Proven track record of leading cross-functional teams to deliver high-quality, cost-effective solutions that exceed customer expectations. Skilled in CAD modeling, FEA analysis, and prototyping, with a strong focus on continuous improvement and lean manufacturing principles.

• Led a team of 12 engineers in the design and development of next-generation aircraft components, resulting in a 15% reduction in weight and a 20% increase in fuel efficiency.
• Implemented a new CAD/CAM system that streamlined the design process and reduced design cycle time by 25%.
• Collaborated with cross-functional teams to identify and resolve design issues, ensuring on-time delivery of projects within budget constraints.
• Developed and implemented a comprehensive design for manufacturability (DFM) program, resulting in a 30% reduction in manufacturing costs.
• Mentored and coached junior engineers, fostering a culture of innovation and continuous improvement within the department.
• Designed and developed a new line of high-precision digital multimeters, resulting in a 20% increase in market share and a 15% increase in revenue.
• Conducted extensive FEA analysis to optimize product designs for strength, durability, and manufacturability.
• Led the implementation of a new PLM system, improving data management and collaboration across the organization.
• Developed and delivered technical training sessions for sales and marketing teams, ensuring effective product launches and customer support.
• Received the "Outstanding Design Achievement" award for innovative product design and exceptional teamwork.
• Designed and developed mechanical components for Microsoft Surface devices, ensuring high quality and reliability.
• Collaborated with electrical and software engineering teams to integrate hardware and software components seamlessly.
• Conducted design reviews and risk assessments to identify and mitigate potential issues early in the development process.
• Developed and maintained detailed design documentation, including CAD models, drawings, and BOM.
• Participated in supplier selection and management, ensuring timely delivery of high-quality components.
• Assisted in the design and development of innovative products and solutions for various industries.
• Conducted patent research and analysis to identify potential areas for new product development.
• Created detailed CAD models and drawings for prototype fabrication and testing.
• Collaborated with senior engineers to solve complex design challenges and optimize product performance.
• Participated in brainstorming sessions and contributed ideas for new inventions and product improvements.
• CAD Modeling (SolidWorks, CATIA, AutoCAD)
• FEA Analysis (ANSYS, Abaqus)
• 3D Printing and Rapid Prototyping
• GD&T (Geometric Dimensioning and Tolerancing)
• DFM (Design for Manufacturability)
• Lean Manufacturing Principles
• Cross-functional Team Leadership
• Technical Writing and Documentation
• Product Lifecycle Management (PLM)
• Risk Assessment and Mitigation
• Patent Research and Analysis
• Supplier Management
• Mentoring and Coaching

Design Engineer Resume Samples

This page provides you with Design Engineer resume samples to use to create your own resume with our easy-to-use resume builder . Below you'll find our how-to section that will guide you through each section of a Design Engineer resume.

What a Hiring Managers Expect from a Good Design Engineer Resume?

A hiring manager would look for the following when it comes to a good design engineering resume:

• A strong foundation in designing unique solutions and solving complex engineering challenges.
• Ability to deliver quality design solutions through cross-functional collaboration with other engineers and stakeholders.
• Proficiency of design methodologies, design concepts, and tools.
• Past experience with identifying the problems and applying constraints to come up with unique engineering solutions instead of using the same templates to all engineering problems.

How to Write a Design Engineer Resume?

To write a professional Design Engineer resume, follow these steps:

• Select the right Design Engineer resume template.
• Write a professional summary at the top explaining your Design Engineer’s experience and achievements.
• Follow the STAR method while writing your Design Engineer resume’s work experience. Show what you were responsible for and what you achieved as a Design Engineer.
• List your top Design Engineer skills in a separate skills section.

The Right Design Engineering Resume Format

The most popular design engineering resume formats in use are reverse chronological and functional resume formats. Use the former if you have less than 15 years of design engineering experience.

• What is the Right Resume Format for a Design Engineer with 3 Years of Experience

With 3 years of design engineering experience, you are likely to have worked for only one or two employers. Which means a reverse chronological format would be best for you. You can use it to carefully show your engineering competence, your experience specific to design tools, education, skills and certifications.

A reverse chronological format would keep your 3 year design engineering resume to one page with all the required information.

• What is the Right Resume Format for a Design Engineer with 1 Year of Experience

With 1 year of experience as a design engineer, utilize a combination or functional resume format to emphasize skills, achievements, and potential. Highlight education, technical skills, relevant projects, and certifications to showcase capabilities and dedication.

How to Write Your Design Engineer Resume Header?

Write the perfect Design Engineer resume header by:

• Adding your full name at the top of the header.
• Add a photo to your resume if you are applying for jobs outside of the US. For applying to jobs within the US, avoid adding photo to your resume header.
• Add your current Design Engineer to the header to show relevance.
• Add your current city, your phone number and a professional email address.
• Finally, add a link to your portfolio to the Design Engineer resume header. If there’s no portfolio link to add, consider adding a link to your LinkedIn profile instead.
• Bad Design Engineer Resume Example - Header Section

Marques 167 Hamilton Drive Phillipsburg, NJ 08865 Marital Status: Married, email: [email protected]

• Good Design Engineer Resume Example - Header Section

Marques Branch, Phillipsburg, NJ, Phone number: +1-555-555-5555, Link: linkedin/in/johndoe

Make sure to add a professional looking email address while writing your resume header. Let’s assume your name is John Doe - here is a formula you can use to create email addresses:

• [email protected] - [email protected]
• [email protected] - [email protected]
• [email protected] - [email protected]
• [email protected] - [email protected]
• [email protected] - [email protected]
• [email protected] - [email protected]

For a Design Engineer email, we recommend you either go with a custom domain name ( [email protected] ) or select a very reputed email provider (Gmail or Outlook).

How to Write a Professional Design Engineer Resume Summary?

Use this template to write the best Design Engineer resume summary: Design Engineer with [number of years] experience of [top 2-3 skills]. Achieved [top achievement]. Expert at [X], [Y] and [Z].

How to Write a Design Engineer Resume Experience Section?

Here’s how you can write a job winning Design Engineer resume experience section:

• Write your Design Engineer work experience in a reverse chronological order.
• Use bullets instead of paragraphs to explain your Design Engineer work experience.
• While describing your work experience focus on highlighting what you did and the impact you made (you can use numbers to describe your success as a Design Engineer).
• Use action verbs in your bullet points.

Design Engineer Resume Example

Design Engineer

• Designed and prepared detailed electronic (CAD) working plans, or scale drawings for complex projects from observation, measurements, sketches, and specifications
• Interpreted and reproduced architectural and interior design drawings to be implemented in final specifications
• Produced reliable and accurate shop drawings in accordance with company manufacturing procedures, and supervise their production
• Provided the support for installation teams and clients.
• Prepared electronic layouts, detailed scale drawings, material and equipment requirements from sketches, specifications, and standard layouts
• Coordinated with all parties involved in relevant architectural construction
• Prepared and gathered site survey data.
• Wrote construction progress reports.
• Supervised and ensured the quality of concrete mix produced on the site.
• Prepared and gathered site survey data
• Tasked with construction and finishing of several multiple family rental projects
• Responsibilities included civil drafting, site work, foundation, and superstructure
• Designed multiple-family units and the completed structural designs
• Worked closely with a cross-disciplinary team, providing researchers with expert additive manufacturing and engineering support.
• Managed a number of relationships with B2B suppliers and manufacturers.
• Skills: Programming, 3D Printing, R&D, Engineering Design, Manufacturing, Project Management.
• Assisted in design of experiments and interpretation of results.
• Involve in the testing of deep foundations
• Design form works for structural works
• Solve technical problems related to structural works at the site
• Structural analysis and detailed design of shallow and deep foundations
• Design of gravity and RCC earth retaining structures adopting Rankine lateral earth pressure concept
• Prepare method statements for structure construction works

Electrical Design Engineer Resume Example

Electrical Design Engineer

• Handled project engineering which included procurement of instruments, Electrical material such as cables, cable trays
• Costing for projects considering all the Electrical and Automation as the scope of supply
• Experienced in handling hazardous area applications and designing control panels for it.
• Worked with process automation instruments and consumeknowledge about their working and wiring

Top 50 Design Engineering Skills to List on Resume

• Pro/ENGINEER
• 3D Modeling
• Finite Element Analysis (FEA)
• Computational Fluid Dynamics (CFD)
• Electromechanical Design
• Structural Analysis
• Thermodynamics
• Material Selection
• Product Development
• Design for Manufacturing (DFM)
• Tolerance Analysis
• Design Optimization
• Rapid Prototyping
• Technical Drawing
• Failure Analysis
• Engineering Mechanics
• Electrical Systems Design
• Systems Integration
• Mechatronics
• Engineering Analysis
• Machine Design
• Manufacturing Processes
• Control Systems
• Troubleshooting
• Programming (Python, C++, etc.)
• 3D Printing
• Reverse Engineering
• Structural Design
• Computational Design
• System Modeling
• Robotics Automation
• Industrial Design
• Process Engineering
• Design Validation
• Product Lifecycle Management (PLM)
• Design Documentation

How Long Should my Design Engineer Resume be?

Your Design Engineer resume length should be less than one or two pages maximum. Unless you have more than 25 years of experience, any resume that’s more than two pages would appear to be too long and risk getting rejected.

On an average, for Design Engineer, we see most resumes have a length of 2. And, that’s why we advise you to keep the resume length appropriate to not get rejected.

Copyright © 2024 Workstory Inc.

Select Your Language:

• Resume Builder
• Resume Templates
• Resume Formats
• Resume Examples
• Cover Letter Builder
• Cover Letter Templates
• Cover Letter Formats
• Cover Letter Examples
• Career Advice
• Interview Questions
• Resume Skills
• Resume Objectives
• Job Description
• Job Responsibilities
• FAQ’s

Design Engineer Resume Examples

Writing a resume as a design engineer can be intimidating, especially if you are a new graduate. When employers read your resume, they want to know that you have the technical abilities necessary to do the job, as well as the creative skills to design innovative products. Crafting a well-written design engineer resume that is tailored to the job posting is essential in order to stand out from the competition and get your foot in the door. This guide provides examples and tips for writing a design engineer resume that will stand out from the rest.

If you didn’t find what you were looking for, be sure to check out our complete library of resume examples .

Start building your dream career today! 

Create your professional resume in just 5 minutes with our easy-to-use resume builder!

Design Engineer

123 Main Street | Anytown, USA 99999 | Phone: (123) 456-7890 | Email: [email protected]

I am a highly motivated and organized Design Engineer with over a decade of experience in designing and developing quality engineering solutions. I specialize in improving existing products and developing new ones, while applying best practices and the latest technologies to design optimized solutions. My core skills include project management, 3D modeling, problem- solving, CAD & CAM software, and engineering design principles. I also have extensive experience in supervising teams, working with vendors and clients, and delivering results on time and on budget.

Core Skills :

• Project Management
• 3D Modeling
• Problem- solving
• CAD & CAM software
• Engineering Design Principles
• Vendor and client management
• Team supervision
• Time and budget management

Professional Experience : Design Engineer, ABC Company – 2018 to Present

• Designed innovative solutions for a variety of engineering problems for multiple projects
• Developed 3D models and rendered images for clients
• Utilized CAD & CAM software for design optimization
• Drafted detailed technical reports for client projects
• Collaborated with team members and vendors to develop and implement solutions
• Provided technical support to other departments

Design Engineer, XYZ Company – 2016 to 2018

• Managed and supervised a team of five engineers
• Developed prototypes and conducted experiments to test product viability
• Wrote technical documentation to document product design
• Negotiated with vendors to procure necessary components
• Created 3D models using CAD software
• Ensured designs met industry standards and best practices

Design Engineer, QRS Company – 2014 to 2016

• Developed new products from concept to completion
• Created 3D models for client projects
• Utilized engineering design principles to develop efficient solutions
• Monitored project progress and ensured timely delivery
• Developed and implemented process improvements
• Documented design and testing results

Education : Bachelor of Science in Engineering, University of Virginia

Create My Resume

Build a professional resume in just minutes for free.

Design Engineer Resume with No Experience

Recent graduate in Mechanical Engineering with a diverse background in design, analysis and prototyping. Seeking a Design Engineer role to utilize skills in CAD/CAM, 3D printing and problem- solving to create efficient designs. Passionate about finding creative solutions to complex problems and eager to contribute to a team that is dedicated to continuous improvement.

• SolidWorks, AutoCAD, CATIA, MasterCAM
• CAD/CAM engineering
• 3D printing
• Prototyping
• Troubleshooting
• Technical documentation
• Quality control
• Team collaboration

Responsibilities

• Create detailed engineering design models using CAD/CAM software
• Utilize 3D printing for rapid prototyping
• Troubleshoot and fix design defects
• Generate technical documentation for design process
• Perform quality assurance tests on design projects
• Collaborate with a team of engineers to develop innovative designs
• Research and analyze design trends in the industry

Experience 0 Years

Level Junior

Education Bachelor’s

Design Engineer Resume with 2 Years of Experience

I am a Design Engineer with over two years of experience in designing, testing, and delivering products for a diverse range of products. I have a proven track record of success in project management, process improvement and collaboration with external stakeholders. I have a versatile skill set that includes concept development, CAD/CAM software, as well as a strong ability to troubleshoot and solve complex problems. I am an effective communicator and thrive in a fast- paced environment. I am an organized and detail- oriented individual who works well under pressure and can quickly adapt to changing demands.

• Process Improvement
• CAD/CAM Software
• Problem Solving
• Communication
• Detail- Oriented
• Time Management

Responsibilities :

• Developed and tested new products to meet customer specifications and requirements
• Used CAD/CAM software to design and simulate new parts, components and assemblies
• Collaborated with various departments to ensure on- time delivery of products
• Analyzed engineering data and design specifications to identify issues with existing products
• Developed process improvement strategies to optimize product manufacturing
• Investigated and troubleshot engineering issues to ensure product quality
• Reviewed product design and manufacturing documents for accuracy and completeness
• Implemented quality control procedures to ensure product safety and compliance with regulations

Experience 2+ Years

Design Engineer Resume with 5 Years of Experience

A highly motivated and detail- oriented professional with 5 years of experience in design engineering. Proven ability to develop creative design solutions, develop and maintain key relationships with personnel and clients, and manage engineering projects. Possesses excellent technical and time management skills, as well as the ability to think critically and solve complex engineering problems. A team player who is passionate about the field of design engineering and is committed to delivering high quality designs and engineering solutions.

• Design Engineering
• Technical Writing
• Quality Assurance
• Client Relations
• Managed and executed engineering projects from concept to completion
• Developed design solutions for complex engineering projects
• Utilized CAD/CAM software to create detailed designs
• Prepared technical reports, drawings and schematics for engineering projects
• Developed and maintained relationships with personnel and clients
• Tested designs for accuracy and quality assurance
• Researched and evaluated new engineering technologies and techniques
• Provided technical support to other engineers and technicians

Experience 5+ Years

Level Senior

Design Engineer Resume with 7 Years of Experience

Highly skilled Design Engineer with 7+ years of experience in the engineering and design sector. Demonstrated solid ability to create a wide range of mechanical components and products. Adept at developing 3D models and drawings, developing prototypes, and creating various design concepts. Experienced in creating and implementing improvements to existing designs, as well as creating solutions that are cost- efficient, functional, and practical.

• Engineering Design
• Product Development
• Design Prototypes
• Design Concepts
• Developed 3D models and drawings for a variety of engineering projects.
• Created design concepts for products and components that adhered to customer specifications and requirements.
• Developed prototypes for in- house testing and customer demonstration.
• Implemented design improvements to existing products to increase efficiency and performance.
• Performed cost- benefit analysis to ensure cost- efficient and practical solutions.
• Assisted in the development and maintenance of engineering design standards.
• Performed calculations and simulations for engineering projects.

Experience 7+ Years

Design Engineer Resume with 10 Years of Experience

Highly motivated and experienced Design Engineer with 10 years of experience in the design and engineering field. Skilled in troubleshooting and problem solving, with a high attention to detail and strong aptitude for project management. Experienced in customer relations, product design, engineering management, and quality control. Adept in leading a team to complete projects in a timely manner while maintaining a high standard of quality.

• CAD/CAM Design
• Engineering Management
• Product Design
• Quality Control
• Customer Relations
• Managed customer relations, engineering and production processes, and quality control for engineering projects.
• Developed product design using CAD/CAM software and documented the design process.
• Identified and troubleshot issues with existing products and implemented solutions.
• Oversaw engineering projects to ensure timely completion while maintaining a high standard of quality.
• Managed teams of engineers to ensure projects are completed on time and within budget.
• Collaborated with other departments to ensure project deadlines were met.
• Developed testing protocols and conducted quality control inspections.
• Assessed process improvements and implementation of best practices.

Experience 10+ Years

Level Senior Manager

Education Master’s

Design Engineer Resume with 15 Years of Experience

Design engineer with 15 years of experience in the construction and engineering industry. Skilled in developing engineering designs, analyzing technical data and material specifications, and optimizing project performance. Adept at collaborating with designers, engineers, and contractors to ensure that products and projects meet quality standards. Proven track record of success in overseeing projects from concept to completion.

• Construction/Engineering Knowledge
• Stress/Strain Analysis
• Troubleshooting/Problem Solving
• Cost Estimation
• Documentation/Reporting
• Developing and managing the production of engineering drawings and specs
• Carrying out stress and strain analysis of components and assemblies
• Collaborating with designers, engineers, and other stakeholders on projects
• Optimizing project performance, ensuring cost, quality and schedule targets are met
• Troubleshooting, diagnosing and resolving engineering problems
• Assessing project requirements and developing appropriate designs
• Preparing cost estimates and materials specifications
• Generating detailed reports and maintaining accurate documentation

Experience 15+ Years

Level Director

In addition to this, be sure to check out our resume templates , resume formats ,  cover letter examples ,  job description , and  career advice  pages for more helpful tips and advice.

What should be included in a Design Engineer resume?

A design engineer resume should be tailored to the individual’s skills and experience. It should include the following sections:

• Education: Include any bachelor’s or master’s degrees, or other related degrees or certifications.
• Experience: Not just the job titles and places of employment, but also any awards, technical accomplishments, or other achievements relevant to the job.
• Technical Skills: Include any software, coding, or other design-related skills.
• Professional Skills: Describe any teamwork or communication skills, problem-solving skills, or other soft skills related to design engineering.
• Accomplishments: Describe any projects or initiatives that you were involved in, and the positive outcomes of those.
• Professional Associations: List any design or engineering organizations that you are a part of.
• References: Include at least two professional references, such as past employers or professors, who can attest to your design engineering skills.

What is a good summary for a Design Engineer resume?

A Design Engineer resumes should be concise and contain a summary of the individual’s skills, accomplishments, and experience. This summary should be tailored to the specific job and should highlight the candidate’s ability to design and develop products, systems, or components. It should also demonstrate their knowledge of CAD/CAM software, fabrication techniques, engineering principles, and safety regulations. The resume should also include a list of relevant projects and any awards or recognition for excellence in engineering. Finally, the summary should discuss the candidate’s ability to work well under pressure and deliver results in a timely manner. A Design Engineer resume should be an accurate representation of the engineer’s experience and skills, which is why it should be thoroughly reviewed before submitting to a potential employer.

What is a good objective for a Design Engineer resume?

Design engineers are responsible for designing products according to customer specifications, as well as developing new products to meet market demands. When writing a resume for a design engineer position, it’s important to create a clear and concise objective that speaks to your qualifications and experience. Here are some tips to help you create an effective objective for your design engineer resume:

• Focus On Your Qualifications: Your objective should highlight your qualifications, such as your experience in product design, engineering principles, and CAD software. Make sure to list any certifications or education you may have to showcase your knowledge.
• Describe Your Career Goals: Explain what you hope to achieve in your career as a design engineer. This could include more responsibility, a more advanced role, or a title such as lead design engineer.
• Focus On Your Achievements: Showcase your achievements from previous positions, such as successfully developing a product from concept to completion.

By following these tips, you’ll be able to create an effective objective for your design engineer resume. With a clear and concise goal, you’ll be able to showcase your qualifications and experience while demonstrating your career ambitions.

How do you list Design Engineer skills on a resume?

Design engineers must possess a combination of engineering, technical, and creative skills in order to fulfil their responsibilities. The following list can help you include the design engineer skills most relevant to the job you’re applying for on your resume:

• Expertise in CAD software: Design engineers must be knowledgeable in the use of computer-aided design software, such as AutoCAD, SolidWorks, and Catia, in order to create and modify 3D models, drawings, and prototypes.
• Knowledge of engineering principles: Design engineers must understand the principles of engineering, such as mechanics, thermodynamics, and materials science, in order to create designs that function as intended.
• Analytical skills: Design engineers need to be able to analyze a design from multiple perspectives, such as safety, cost, and customer requirements.
• Troubleshooting skills: Design engineers must be able to identify and solve complex engineering problems.
• Creative problem-solving skills: Design engineers must be able to come up with innovative solutions to difficult problems.
• Attention to detail: Design engineers must be able to spot any potential errors in a design before it is finalized.
• Time management skills: Design engineers must be able to manage their time wisely and work efficiently to meet deadlines.
• Communication skills: Design engineers must be able to communicate their designs effectively to customers and colleagues.

What skills should I put on my resume for Design Engineer?

When it comes to applying for a Design Engineer role, having the right skills on your resume is essential. The best way to showcase these skills is by listing them clearly and concisely. Here are a few of the top skills to consider adding to your resume:

• CAD Design: Being proficient in computer-aided design is a must for any Design Engineer. Be sure to highlight your experience with software programs like AutoCAD and SolidWorks.
• Engineering Principles: A good understanding of engineering principles and theories is essential. Showcase your knowledge of thermodynamics, structural analysis, and other relevant engineering topics.
• Machine Design: If you have experience with machine design, be sure to include it on your resume. Demonstrate your understanding of materials, assemblies, and controls.
• Project Management: Being able to manage projects and tasks efficiently is key. Showcase your ability to lead a team and coordinate the different parts of a project.
• Problem-Solving: Demonstrate your analytical and creative problem-solving abilities. Showcase your ability to develop solutions to complex challenges.
• Product Development: Showcase your experience in product development, from concept to completion. Highlight your ability to bring ideas to life and launch new products.

By adding these skills to your resume for a Design Engineer role, you’ll be putting your best foot forward and demonstrating your qualifications for the job.

Key takeaways for an Design Engineer resume

As an aspiring Design Engineer, crafting an effective resume is essential to getting noticed by employers and landing the job of your dreams. It’s important to highlight your experience, skills, and accomplishments that are most relevant to the job you’re seeking. Here are some key takeaways to keep in mind when creating your resume as a Design Engineer:

• Highlight your technical skills. Design Engineers must be highly trained and proficient in a wide range of technical skills and software, so be sure to emphasize these qualifications in your resume. Include a list of programs and technologies that you’re familiar with, and give examples of how you’ve used them in the past.
• Showcase your problem-solving skills. Design Engineers are known for their ability to solve complex problems quickly and efficiently. Showcase any challenges you’ve overcome in your past roles and how you used your skills and experience to resolve them.
• Demonstrate your communication skills. Design Engineers must be able to effectively communicate with clients and colleagues, so make sure this is evident in your resume. Include examples of successful projects you’ve worked on and how your communication skills have contributed to their success.
• Showcase your leadership abilities. Many Design Engineer roles require you to lead projects, so make sure you emphasize your leadership qualities in your resume. Include any examples of times you’ve taken charge of a project and successfully delivered the results.

By following these tips, you can ensure your Design Engineer resume is up to scratch and ready to help you land the job you’ve been dreaming of!

Let us help you build your Resume!

Make your resume more organized and attractive with our Resume Builder

• Senior Design Engineer Resume Example

Resume Examples

• Common Tasks & Responsibilities
• Top Hard & Soft Skills
• Action Verbs & Keywords
• Resume FAQs
• Similar Resumes

Common Responsibilities Listed on Senior Design Engineer Resumes:

• Developing and designing new products and systems
• Creating detailed technical drawings and specifications
• Testing and evaluating designs for functionality and performance
• Analyzing customer requirements and developing solutions
• Identifying and resolving design issues
• Developing and implementing cost-effective manufacturing processes
• Collaborating with other departments to ensure product success
• Ensuring compliance with safety and quality standards
• Maintaining and updating design records
• Providing technical support and guidance to other teams
• Conducting research and staying up-to-date with industry trends

Speed up your resume creation process with the AI-Powered Resume Builder . Generate tailored achievements in seconds for every role you apply to.

Senior Design Engineer Resume Example:

• Developed and designed a new product line, resulting in a 25% increase in sales and a 10% improvement in customer satisfaction.
• Collaborated with cross-functional teams to optimize manufacturing processes, reducing production costs by 15% and improving product quality by 20%.
• Provided technical support and guidance to junior engineers, resulting in a 30% reduction in design errors and an increase in team productivity by 25%.
• Designed and implemented a new testing and evaluation process, resulting in a 20% reduction in product development time and a 15% improvement in design accuracy.
• Analyzed customer requirements and developed innovative solutions, leading to a 30% increase in customer retention and a 10% growth in market share.
• Identified and resolved design issues, resulting in a 25% reduction in product recalls and a 20% improvement in product reliability.
• Developed and implemented cost-effective manufacturing processes, reducing production costs by 20% and improving product profitability by 15%.
• Collaborated with other departments to ensure successful product launches, resulting in a 30% increase in market penetration and a 10% growth in revenue.
• Conducted research and stayed up-to-date with industry trends, leading to the adoption of new technologies and a 25% improvement in product performance.
• Advanced product design and development
• Cross-functional collaboration
• Technical guidance and mentorship
• Testing and evaluation process design
• Customer requirement analysis
• Innovative problem-solving
• Design issue identification and resolution
• Cost-effective manufacturing process development
• Interdepartmental coordination
• Industry trend analysis and research
• New technology adoption
• Quality control and assurance
• Project management
• CAD software proficiency
• Prototyping and simulation
• Material selection and optimization
• Risk management in design
• Understanding of manufacturing processes
• Strong mathematical and analytical skills
• Excellent communication and presentation skills
• Knowledge of regulatory standards and compliance
• Proficiency in design software like AutoCAD, SolidWorks
• Time management and multitasking
• Attention to detail and precision
• Team leadership and management.

Top Skills & Keywords for Senior Design Engineer Resumes:

Hard skills.

• Mechanical design and engineering
• Structural analysis and simulation
• Design for manufacturability (DFM)
• Prototyping and testing
• Knowledge of materials and manufacturing processes
• Technical documentation and drawing interpretation
• Design optimization and cost reduction
• Design for assembly (DFA)
• Risk assessment and mitigation
• Knowledge of industry standards and regulations

Soft Skills

• Leadership and Team Management
• Communication and Presentation Skills
• Collaboration and Cross-Functional Coordination
• Problem Solving and Critical Thinking
• Adaptability and Flexibility
• Time Management and Prioritization
• Decision Making and Strategic Planning
• Attention to Detail and Accuracy
• Analytical and Technical Skills
• Creativity and Innovation
• Active Listening and Feedback Incorporation
• Emotional Intelligence and Relationship Building

Resume Action Verbs for Senior Design Engineers:

• Implemented
• Collaborated
• Streamlined
• Conceptualized
• Troubleshot

Generate Your Resume Summary

Resume FAQs for Senior Design Engineers:

How long should i make my senior design engineer resume, what is the best way to format a senior design engineer resume, which keywords are important to highlight in a senior design engineer resume, how should i write my resume if i have no experience as a senior design engineer, compare your senior design engineer resume to a job description:.

• Identify opportunities to further tailor your resume to the Senior Design Engineer job
• Improve your keyword usage to align your experience and skills with the position
• Uncover and address potential gaps in your resume that may be important to the hiring manager

Complete the steps below to generate your free resume analysis.

Related Resumes for Senior Design Engineers:

Design engineer, hardware design engineer, product design engineer, senior product designer, instrumentation design engineer, design estimation engineer, entry level design engineer, senior ui designer.

Design Engineer resume examples for 2024

A successful design engineer resume highlights strong computer-aided design (CAD) skills and proficiency in programming languages like C+ According to M. Stephen Enders Ph.D. , Professor & Department Head at Colorado School of Mines, "the most important thing that stands out in resumes is past job experiences, particularly student internships in relevant companies." design engineers should also showcase their discernment skills to ensure high systems quality and analytical skills for data analysis. As Stephen Kuchnicki Ph.D., Associate Professor, Chair, Department of Civil and Mechanical Engineering at York College of Pennsylvania, points out, "teamwork skills are critical... Engineers do not work alone often, if at all."

Design Engineer resume example

How to format your design engineer resume:.

• The job title on your resume should match your application for the role.
• Ensure your work experience focuses on achievements, rather than responsibilities.
• Recruiters and hiring managers suggest fitting your resume on one page.

Choose from 10+ customizable design engineer resume templates

Choose from a variety of easy-to-use design engineer resume templates and get expert advice from Zippia’s AI resume writer along the way. Using pre-approved templates, you can rest assured that the structure and format of your design engineer resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Professional design engineer resume example

Resume tips to land the job:.

• [object Object]

Design Engineer resume format and sections

1. add contact information to your design engineer resume.

Design Engineer Resume Contact Information Example # 1

Hank Rutherford Hill

St. Arlen, Texas | 333-111-2222 | [email protected]

2. Add relevant education to your design engineer resume

Your resume's education section should include:

• The name of your school
• The date you graduated ( Month, Year or Year are both appropriate)
• The name of your degree

If you graduated more than 15 years ago, you should consider dropping your graduation date to avoid age discrimination.

Optional subsections for your education section include:

• Academic awards (Dean's List, Latin honors, etc. )
• GPA (if you're a recent graduate and your GPA was 3.5+)
• Extra certifications
• Academic projects (thesis, dissertation, etc. )

Other tips to consider when writing your education section include:

• If you're a recent graduate, you might opt to place your education section above your experience section
• The more work experience you get, the shorter your education section should be
• List your education in reverse chronological order, with your most recent and high-ranking degrees first
• If you haven't graduated yet, you can include "Expected graduation date" to the entry for that school

Check More About Design Engineer Education

Design Engineer Resume Relevant Education Example # 1

Bachelor's Degree In Mechanical Engineering 2005 - 2008

Purdue University West Lafayette, IN

Design Engineer Resume Relevant Education Example # 2

Bachelor's Degree In Mechanical Engineering 2003 - 2006

University of California - Davis Davis, CA

3. Next, create a design engineer skills section on your resume

Your resume's skills section should include the most important keywords from the job description, as long as you actually have those skills. If you haven't started your job search yet, you can look over resumes to get an idea of what skills are the most important.

Here are some tips to keep in mind when writing your resume's skills section:

• Include 6-12 skills, in bullet point form
• List mostly hard skills ; soft skills are hard to test
• Emphasize the skills that are most important for the job

Hard skills are generally more important to hiring managers because they relate to on-the-job knowledge and specific experience with a certain technology or process.

Soft skills are also valuable, as they're highly transferable and make you a great person to work alongside, but they're impossible to prove on a resume.

Example of skills to include on an design engineer resume

C++ is a general-purpose programming language that is used to create high-performing applications. It was invented as an extension to the C language. C++ lets the programmer have a high level of domination over memory and system resources. C++ is an object-oriented language that helps you implement real-time issues based on different data functions

Engineering design is defined as the method that engineers use to recognize and solve problems. It is an extensive and flexible approach to problem-solving and provides the necessary information needed regarding every step of the process. An engineering design is a collaborative effort of the team to identify problems underlying a process and find out ways to solve them.

Product design can be described as a process of imagining, creating, and iterating products that solve user's problems and talk about the specific needs of users in the market. Product design is an engineering disciple and it is the basic design and idea that goes before the mass production of the product.

An IP - Internet Protocol is a unique number assigned to all devices connected to information technology, such as printers, routers, modems, etc. Each device or domain that connects to the Internet is assigned an IP address, and as packets are directed to the IP address attached to them, the data goes where it is needed. IP addresses are the identifier used to send information between devices on a network. They contain location information and make devices accessible for communication.

Product development is the complete procedure of creating a product from concept until release of the final product. Product development has many stages after which a product is released into the market. Identifying the need, creating the opportunity, conceptualizing a product, and providing a solution, all are different stages of product development.

GD refers to Grade Delay and is often mentioned on report cards or academic records when the instructor of a particular subject decides to hold the grade of a student. This is usually done if the instructor wants the student to improve their grade by retaking the exam or doing something for extra credit that will ultimately enhance their overall grade. Eventually, when the grade is assigned, the GD is then replaced with the original grade.

The Finite Element Analysis (FEA) is software that can simulate physical phenomenon with the help of numerical procedures. FEA helps companies in developing better and cost-effective products by reducing the number of physical prototypes.

Top Skills for a Design Engineer

• Project Management , 4.0%
• Work Ethic , 3.8%
• Other Skills , 83.3%

4. List your design engineer experience

The most important part of any resume for a design engineer is the experience section. Recruiters and hiring managers expect to see your experience listed in reverse chronological order, meaning that you should begin with your most recent experience and then work backwards.

Don't just list your job duties below each job entry. Instead, make sure most of your bullet points discuss impressive achievements from your past positions. Whenever you can, use numbers to contextualize your accomplishments for the hiring manager reading your resume.

It's okay if you can't include exact percentages or dollar figures. There's a big difference even between saying "Managed a team of design engineers" and "Managed a team of 6 design engineers over a 9-month project. "

Most importantly, make sure that the experience you include is relevant to the job you're applying for. Use the job description to ensure that each bullet point on your resume is appropriate and helpful.

• Converted Virginia Natural Gas pipeline maps to AutoCAD format ensuring their accuracy and scale was correct.
• Produced 3D PDS piping models and extracted piping isometrics.
• Experience with AutoCAD MEP 2011, Navis Works 2011 and utilizing Boxnet for Online Collaboration.
• Develop and maintain document control system for purchased and manufactured parts including accurate BOMS and ECN implementation.
• Trained Support Equipment designers on PDM, manufacturing process and drafting standard.
• Utilized SolidWorks to develop preliminary CAD models and structural analysis.
• Draft building systems using AutoCAD R12, R14, 2000, and Light.
• Sign off on new products for DFM.
• Provided associative parts lists (BOM) for all assemblies.
• Designed manufacturing equipment for Lighting Industry using Unigraphics 3-D CAD software Maintained engineering documentation using server based archive system
• Check out of motors and starters installations medium and low voltages and terminations [ ] KV down to [ ]
• Project was a NEC/ IEEE/ NEMA/ API design.
• Used remote DCS work station to bring system from manual operation to a fully automatic process.
• Simulate analog circuits with LTSpice or MultiSIM and simulation of Verilog written code on ModelSim.
• Create P&IDs and PFDs for equipment.
• Facilitate FMEA to establish approval criteria to identify quality failure concerns for both internal and supplier parts/assemblies.
• Redesign of rock crushers for Cedar Rapids Inc.
• SAP, Wplanner, Vis Mockup, Auto CAD Welding manufacturing engineer for John Deere S series combines.
• Support Assembly & Manufacturing Execution System (AMES) and all manufacturing equipment in areas assigned.
• Worked in the DEF Quality/NOx/NH3 Sensors measurements, rapid screening, and selection.

5. Highlight design engineer certifications on your resume

Specific design engineer certifications can be a powerful tool to show employers you've developed the appropriate skills.

If you have any of these certifications, make sure to put them on your design engineer resume:

• Engineer In Training Certification (EIT)
• Certified Agile Developer (CAD)
• Project Management Professional (PMP)
• Certified Energy Manager (CEM)
• Engineering Management Certification Fundamentals (EMCF)
• Structural Engineer (SE)
• Certified Manager Certification (CM)
• Software Engineering Management Associate Engineer
• Certified Systems Engineering Professional (CSEP)
• Certified Quality Engineer (CQE)

6. Finally, add an design engineer resume summary or objective statement

A resume summary statement consists of 1-3 sentences at the top of your design engineer resume that quickly summarizes who you are and what you have to offer. The summary statement should include your job title, years of experience (if it's 3+), and an impressive accomplishment, if you have space for it.

Remember to emphasize skills and experiences that feature in the job description.

Common design engineer resume skills

• Project Management
• Engineering Design
• Product Design
• Product Development
• Design Reviews
• Mechanical Design
• System Design
• Engineering Drawings
• Circuit Design
• Design Software
• Technical Support
• Aided Design
• Place-And-Route
• Engineering Support
• Prototyping
• Cost Estimates
• Unified Communications
• Design Process
• Design Changes
• Assembly Drawings

Professional design engineer resume templates

Design Engineer Jobs

Links to help optimize your design engineer resume.

• How To Write A Resume
• List Of Skills For Your Resume
• How To Write A Resume Summary Statement
• Action Words For Your Resume
• How To List References On Your Resume

Design Engineer resume FAQs

How do design engineers write resumes, what does a design engineer do, what is a good profile summary in design engineering, search for design engineer jobs.

Updated June 25, 2024

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Design Engineer Related Resumes

• Design Engineer Internship Resume
• Development Engineer Resume
• Electrical Design Engineer Resume
• Engineer Resume
• Equipment Engineer Resume
• Mechanical Design Engineer Resume
• Product Design Engineer Resume
• Product Engineer Resume
• Project Engineer Resume
• Software Design Engineer Resume
• Staff Engineer Resume
• Structural Design Engineer Resume
• System Design Engineer Resume
• Tool Engineer Resume

Design Engineer Related Careers

• Design Engineer Internship
• Development Engineer
• Electrical Design Engineer
• Equipment Engineer
• Lead Design Engineer
• Manufacturing Engineer
• Mechanical Design Engineer
• Mechanical Engineer
• Product Design Engineer
• Product Development Engineer
• Product Engineer
• Project Engineer
• Research And Development Engineer
• Senior Design Engineer

Design Engineer Related Jobs

Design engineer jobs by location.

• Design Engineer Auburn
• Design Engineer Burke
• Design Engineer Columbus
• Design Engineer Ephrata
• Design Engineer Evansville
• Design Engineer Islip
• Design Engineer Long Beach
• Design Engineer Lubbock
• Design Engineer Mansfield
• Design Engineer Minneapolis
• Design Engineer North Lauderdale
• Design Engineer Sharonville
• Design Engineer Weigelstown
• Design Engineer West Caldwell
• Design Engineer Winter Garden
• Zippia Careers
• Architecture and Engineering Industry
• Design Engineer
• Design Engineer Resume

Browse architecture and engineering jobs

• • Designed mechanical components using SolidWorks, ensuring optimal functionality and manufacturability.
• • Collaborated with cross-functional teams to integrate mechanical designs into final products.
• • Created and tested prototypes to validate design concepts.
• • Worked closely with manufacturers to ensure design specifications were met during production.
• • Assisted in creating detailed CAD designs for various mechanical components.
• • Participated in brainstorming sessions to come up with innovative design solutions.
• • Supported the prototyping process, including assembly and testing.
• • Conducted design reviews and incorporated feedback to improve designs.

5 Mechanical Design Engineer Resume Examples & Guide for 2024

Your mechanical design engineer resume should clearly display your proficiency in computer-aided design (CAD) software. It's the cornerstone that showcases your ability to create detailed and precise design plans. Ensure that your experience with product lifecycle management (PLM) systems is also highlighted. This experience underlines your capability to oversee a project from conception to completion.

All resume examples in this guide

Traditional

Resume Guide

Our mechanical design engineer resume guide will teach you:, how to write a great mechanical design engineer resume, start by writing an informative header for your mechanical design engineer resume, show you’re right for the job in your mechanical design engineer resume summary, mechanical design engineer resume: writing the experience section, how should you highlight your mechanical design engineering education, how to include certifications on your mechanical design engineer resume, which skills do employers look for in a mechanical design engineer resume, summary: what are the top tips for the best mechanical design engineer resume.

You’re on a quest for your dream job where you can apply your engineering skills and design products that make a difference.

Whether you envision yourself in the aerospace, military or commercial industries, all of them require top-notch mechanical design engineers. You can be the perfect person for the role.

But first you need to ace your resume and impress the hiring manager.

While you may have tons of experience and qualifications at the ready, you need to know how to show them off in a way that stands out among other applicants.

You’ve come to the right place.

In this guide, we’re going to walk you through step-by-step how to craft your mechanical design engineer resume to get you hired fast.

• The best format for a mechanical design engineer resume that highlights your experience
• Ways to prove your past design success with real quantitative data
• 8+ ways to describe your duties as a mechanical design engineer
• 20+ example technical and soft skills that show you’re the perfect candidate for the role

Related engineering resumes:

• Mechanical Engineer
• Systems Engineer
• Manufacturing Engineer
• Entry Level Mechanical Engineer

The good news is that mechanical design engineers are high in demand.

That being said, companies want to make sure they have the right candidate for the job since the stakes are so high.

You must prove that you are knowledgeable, passionate about design, and ready to solve tough problems.

You can put your best foot forward and prove yourself best with a reverse chronological resume format .

This resume format highlights your experience first, which is the most proven way to show your knowledge in designing and engineering mechanical products.

The reverse chronological resume also gives you an opportunity to:

• Display your educational background
• Highlight your certifications
• Show why you’re the right fit in your summary

Here's what a recruiter will look for in your resume:

• Have you designed and engineered functional mechanical products?
• Do you have a degree in mechanical design, mechanical engineering or another related course?
• Do you have a proven passion for the mechanical design industry, including any personal projects?
• Have you solved mechanical design problems in the past that have produced positive results?

Each of these mechanical design engineer resume sections should paint a clear picture about why you’re the right candidate for their company. Let’s walk-through how to do this.

Let’s say you’re applying for an aerospace engineering company as a junior mechanical design engineer.

Your header originally looks like this:

This could be fine.

It lists important information about you like your name, location and title. But the hiring manager may wonder if you’re mass applying for general mechanical design engineer positions.

You want to show them that you’re especially keen on that specific position.

This header doesn’t make you stand out among the other applicants applying. The hiring manager won’t get any strong impression of you.

Let’s be more specific in our header so the hiring manager knows exactly what we bring to the table:

Hiring managers know right away that you’re a junior mechanical design engineer with aerospace experience.

Your resume header is also a great place to include your LinkedIn profile or personal website link.

Real numbers are key on a mechanical design engineer resume

Your resume is your tool to demonstrate your solid track record within the industry as a mechanical design engineer.

Numbers that can prove the effectiveness of your past product designs including:

• How much did you reduce cost production with design improvements? (use real percentages!)
• Did you reduce the size of products to improve efficiency?
• Did you design for projects with a high budget? (Use real dollar amounts)
• Did you save the company time?

These numbers belong in your resume summary and experience section. We’ll jump into those now.

A mechanical design engineer resume should do two things well:

• Show the hiring manager you’re passionate about getting that specific position
• Prove you have the knowledge & expertise to excel in the role

There are so many facets to mechanical design engineering. Showing your specialty in a certain industry will help prove your unique expertise. Personalizing your resume to the specific job you’re applying for will show off your dedication to the company.

Use your real numbers, data and job posting keywords to your advantage when crafting a powerful summary.

Here’s an example of what not to do:

This summary won’t make the hiring manager jump at the chance to interview you. Why?

• No details on experience level. There’s no mention of how many years of experience or in what industry.
• It’s generic. The hiring manager will automatically assume you’re applying to many positions with the same resume.
• It does not mention how the candidate can satisfy what the job role is specifically looking for.

Here’s an example of a summary that ticks all the boxes:

This resume summary really shines! It’s clear and concise, includes real numbers to back up claims, and it specifically outlines the industry of expertise and knowledge level.

Add real numbers and data from past project successes to prove your expertise in your summary.

There are two main points you should highlight in your resume experience section : software experience and proven design success.

The first step to writing a job-winning experience section: Carefully read through the job posting and mirror the language they use for the job requirements.

Software experience is essential for doing high-quality mechanical design engineering.

Look at the programs listed on the job description, and write them down in your experience if you have a genuine working knowledge of them.

Soft skills are also essential as an effective mechanical design engineer.

You will need to deliver presentations to show your project designs. You will also need to have a strong analytical skill-set to make decisions and lead your teams.

Most candidates will only focus on highlighting their technical skills on their resume. Stand out from the pack by impressing the hiring manager with your soft skills.

We’ll compare a few mechanical design engineer resume examples for what works and what isn’t cutting it in the experience section.

2 mechanical design engineer resume experience samples

This is your opportunity to prove you’re right for the job with your mechanical design background. Here’s a handy list to follow for each past role you list in your experience section:

• What was the goal of the company when you arrived?
• How did your mechanical designs optimize efficiency?
• What were the quantitative results of your work?
• How did you work with your teammates to achieve this goal?

Let’s view these tips in action with two examples of a resume experience section… one is right and one needs some work.

• • Worked with the design team on projects
• • Used CAD tools to complete work
• • Improved efficiency
• • Completed mechanical drawings for piece parts

This experience section doesn’t say anything about the success of the employee in their role. All it does is list their responsibilities, but it doesn’t paint a picture of how they achieved success for the business.

How can the hiring manager trust this candidate to be stellar in the role they’re applying for if they can’t prove any past success?

Now let’s take a look at an experience section that will win over any hiring manager.

• • Worked with a design team of five people to design mechanical solutions for clients.
• • Produced design model evaluations for the highest degree of fit, form and function
• • Meticulously practiced safety procedures
• • Facilitated projects using IES, SBEM/EPC analysis, Heyacomp, Cyman, Revit, AutoCAD and NES spec writing software
• • Optimized workflow time by 20%

This Experience section is more descriptive about the impact you made at the company. You highlighted your certification status, specifically mentioned softwares you’re proficient in, and discussed the positive measurable impact you made at the company.

How to describe the duties of a mechanical design engineer on a resume

Here are some sample work experience responsibilities to consider for your mechanical design engineer resume:

• Managed the design process for products, parts, and assemblies
• Documented results in a clear, cohesive way
• Improved functioning and lifespan of existing equipment with re-designs of essential components
• Identified flaws in assembly parts to improve cost and efficiency
• Lead training sessions on mechanical design across the engineering department
• Researching new products and innovations
• Presenting design plans to clients
• Producing technical documents

What if you’re just entering the job force and don’t have any relevant experience yet?

When applying for an entry-level job, recruiters and hiring managers will understand that you don’t have direct experience as a mechanical design engineer yet.

Here’s how you can make your resume stand out among the recent graduates:

• Highlight your university education, the courses you completed and the GPA you achieved .
• Make connections to industries you’ve worked with in the past and the one in the job posting. How did they overlap? These can include university social clubs and part-time jobs you held while in school.
• Include apprenticeships in the design and engineering field that prepared you for your first role.
• Include any personal projects you have completed, such as a gadget you designed, to show your passion for mechanical design engineering.

Your educational background is an essential component of landing a role as a mechanical design engineer.

It’s important that you use the education section of your resume to highlight your qualifications.

The most common university degrees for mechanical design engineers include:

• Mechanical Engineering
• Product Design
• Electromechanical Engineering
• Engineering Manufacturing
• Mechatronics

A significant amount of work experience and certifications can make up for this.

If you’re low on experience in the field, elaborate on your education. Show your dedication to ongoing learning by listing certifications that you’re currently working towards. Or prove your commitment to becoming a chartered engineer with CEng status.

Completing certifications in addition to your formal university education will set you apart from other candidates when applying for a role. It’s important to keep in mind that:

• Not all certificates are industry-wide approved
• Real experience is a better indication of performance

If you’re interested in expanding your education in the field, here are some popular certifications for mechanical design:

• Autodesk ACU & ACP Certifications
• MathWorks MAT Lab Certification Program
• CATIA Certification
• SOLIDWORKS Certification

Technical proficiency in the top mechanical design programs should be highlighted in your skills section .

You should be familiar with programs in design and modelling (CAD/CAM), rendering packages (Hypershot, V-Ray) and analysis, such as ANSYS.

There are countless programs you can list, so you should take a look at the job role to see which programs the company values most.

Soft skills set you apart from other mechanical design engineers.

You will need to present your design models, provide the vision for your ideas and analyze results.

Not only that, but you will often need strong communication and people skills, since you will likely work with a design and engineering team.

Here are a list of skills you can include in your mechanical design engineer resume.

17 technical skills to include on a mechanical design engineer resume

• CAD Packages: Solidworks, Pro Engineer, AutoCAD
• Rendering packages: Hypershot, V-Ray
• PTC Creo Elements/Pro
• Siemens PLM Software NX
• Analysis: ANSYS, Fluent, Hyperview
• Windchill PDMLink
• Pro/INTRALINK
• Solid & Parametric Modeling
• Geometric Dimensioning & Tolerancing
• Design for Manufacturability (DFM)
• ISO 9001 Standards

3 soft skills to include on a mechanical design engineer resume

• Presentation skills
• Project management
• Communication skills (written & spoken)
• Include real facts and figures in your resume to prove past success in design
• Highlight your credentials, such as being certified or having CEng status
• List the tools and programs you’re most familiar with using
• Discuss the soft skills that will help you be successful in your job

Looking to build your own Mechanical Design Engineer resume?

• Resume Examples

How to Write an International Resume for a Job Abroad

How to answer 'what was your greatest accomplishment' in an interview, navigating the decision to renege on a job offer: risks, consequences, and how to do it right, how to list certifications on a resume (examples included), how to choose which resume format is right for you, how to tell a story in a cover letter.

• Create Resume
• Terms of Service
• Privacy Policy
• Cookie Preferences
• Resume Templates
• AI Resume Builder
• Resume Summary Generator
• Resume Formats
• Resume Checker
• Resume Skills
• How to Write a Resume
• Modern Resume Templates
• Simple Resume Templates
• Cover Letter Builder
• Cover Letter Examples
• Cover Letter Templates
• Cover Letter Formats
• How to Write a Cover Letter
• Resume Guides
• Cover Letter Guides
• Job Interview Guides
• Job Interview Questions
• Career Resources
• Meet our customers
• Career resources
• English (UK)
• French (FR)
• German (DE)
• Spanish (ES)
• Swedish (SE)

© 2024 . All rights reserved.

Made with love by people who care.

Build my resume

• Build a better resume in minutes
• Resume examples
• 2,000+ examples that work in 2024
• Resume templates
• Free templates for all levels
• Cover letters
• Cover letter generator
• It's like magic, we promise
• Cover letter examples
• Free downloads in Word & Docs

3 Mechanical Design Engineer Resume Examples for 2024

Professional Mechanical Design Engineer

Best for senior and mid-level candidates

There’s plenty of room in our elegant resume template to add your professional experience while impressing recruiters with a sleek design.

Resume Builder

Like this template? Customize this resume and make it your own with the help of our Al-powered suggestions, accent colors, and modern fonts.

Mechanical Design Engineer Resume

Professional mechanical design engineer resume, formal mechanical design engineer resume.

• Mechanical Design Engineer Resume Writing 101

As a mechanical design engineer, you’re no stranger to complex calculations and precise measurements. Your in-depth knowledge of engineering, combined with a deep understanding of physical principles, helps you create extraordinary designs.

You’ve worked on countless blueprints and documentation, but now, it’s time to put them aside for a moment because you’ll need an effective resume template of your own to score your next job.

Our mechanical design engineer resume examples are here to simplify the process for you. We’ll help you make a resume that accurately highlights all of your strengths!

or download as PDF

Copy this text for your mechanical design engineer resume!

Kaida Kim Labor and Delivery Nurse [email protected] (123) 456-7890 Knoxville, TN

WORK EXPERIENCE Labor and Delivery Nurse East Tennessee Children’s Hospital November 2019 – current Knoxville, TN – Used GE Corometrics fetal monitors to track and evaluate fetal heart rates for 450+ cases each year, ensuring accurate and timely intervention as needed – Developed and implemented individualized care plans for high-risk pregnancies, decreasing complications by 77% – Used the Siemens epoc Blood Analysis System to provide immediate blood gas, electrolyte, and metabolite results – Oversaw the neonatal resuscitation program, ensuring staff certification and contributing to a 62% improvement in neonatal outcomes

Phlebotomist Saint Thomas Health October 2015 – October 2019 Nashville, TN – Drew blood from an average of 70 patients per day while maintaining a less than 2% recollection rate – Provided rapid bedside blood analysis and reduced turnaround times for results by 43% through the Abbott i-STAT System – Coordinated with lab technicians to ensure prompt and accurate blood sample analysis – Conducted over 200+ mobile blood drives and boosted blood donations by 54%

Medical Assistant Vanderbilt University Medical Center September 2012 – September 2015 Nashville, TN – Managed 3,000+ patient appointments with McKesson EHR each year, increasing clinic efficiency by 25% – Reduced patient wait times by 36% by implementing self check-in kiosks and managing patient flow – Cleaned and sterilized medical equipment, maintaining compliance with safety and health regulations

SKILLS – McKesson – GE Corometrics – Baxter Sigma Spectrum – Masimo Root with Radius-7 – GE Healthcare CARESCAPE Monitor B650/B850 – Abbott i-STAT System – Siemens epoc Blood Analysis System

EDUCATION Bachelor of Science Nursing Vanderbilt University 2008 – 2012 Nashville, TN

LICENSES – Certified Registered Nurse in Obstetrics (C-OB)

ACTIVITIES Program Coordinator at the National Organization for Women (NOW), organizing events that promote women’s health and reproductive rights

Related resume examples

• Entry-level mechanical engineering
• Mechanical engineering internship
• Mechanical project engineer
• Mechanical service engineer
• Mechanical engineer

What Matters Most: Your Engineering Skills & Design Experience

Being successful in your role is closely tied to your diverse skill set . From being a pro at various 3D modeling software to being a math whiz with a knack for creative thinking, you’ve got all the skills needed to transform a blueprint into a physical object.

It takes a lot to know how things work, and even more to know how to make them work better, or even to invent something new entirely. This is why filling out the “skills” part of your resume should be no problem, and you’ve got what it takes to make this section impressive.

While it’s important for you to translate complex innovations for a non-technical audience, your soft skills will have their chance to shine in the cover letter and the interview.

The secret recipe to successfully highlighting your engineering expertise is to focus on all your technical abilities. This includes staples, such as AutoCAD, but also things like an intimate knowledge of thermodynamics.

9 best mechanical design engineer skills

• Rapid Prototyping
• Thermodynamics
• Autodesk Inventor
• Fluid Mechanics

Sample mechanical design engineer work experience bullet points

In your role, each day brings a new challenge, from patenting innovative engines to meticulous design reviews. When you fill out your resume, it’s best to stray away from the day-to-day. 

Saying that you “tested designs” or “worked on documentation” might be true, but it’s not the highlight of your career, which is what you want to focus on here.

Think of achievements that are closely tied to the skills you’ve listed, and add data to make them more tangible. 

For example, say that you were able to increase the production rate by 17% by optimizing the design of mechanical components—the percentage is eye-catching and shows your true impact.

Here’s how you can do this in your resume:

• Used SolidWorks to design and optimize a new HVAC system for a 10-story building, reducing energy costs by 21% 
• Delivered a complex conveyor system project 3 weeks ahead of schedule, saving 20% of the budget
• Reduced design errors by 13% by spearheading a system of monthly design reviews, resulting in over $75,000 in annual savings
• Introduced the use of finite element analysis via ANSYS, reducing prototype costs for heat transfer solutions by 19%

Top 5 Tips for Your Mechanical Design Engineer Resume

• Make sure to mention all the tools you’re proficient in. Focus on AutoCAD, SolidWorks, Matlab, ANSYS, CATIA, Creo Parametric, and other industry-specific tools. Bonus points if these programs are listed in the job description ! 
• Mechanical design engineering roles can vary wildly from one to the next, so make sure to tailor your resume to match the job. Swap skills and work experience bullet points in and out as needed. For example, if the company is in the automotive sector, mention your experience in building engine parts.
• If you have the Professional Engineer (PE) certification, it’s worthy of inclusion, so pick a resume template that lets you easily add it.
• With a host of technical skills to boot, you really don’t have space in your resume to list things like “creative” or “team player,” but slip them into your work experience. Mention instances of working with cross-functional teams of engineers or holding presentations for important clients.
• Designing something from scratch is time-consuming, but so rewarding when your idea comes to life. Discuss your greatest designs in your resume and cover letter , be it a heat exchanger or a new pump, and elaborate on them during the interview.

Zone in on your engineering knowledge and try to look for transferable skills. For example, if you’re applying to a company in the aerospace sector, highlight your knowledge of safety standards and thermodynamics.

You can, but only if you update it for each company. Use it to quickly summarize your greatest accomplishments and describe how you’re hoping to grow in your new role.

Create a cover letter as an extension of your resume. For example, if you talked about developing a new gearbox design using CATIA, circle back to that in the cover letter and explain what you learned from the whole process.

Resume Worded   |  Proven Resume Examples

• Resume Examples
• Engineering Resumes
• Electrical Engineer Resume Guide & Examples

Electrical Design Engineer Resume Examples: Proven To Get You Hired In 2024

Jump to a template:

• Electrical Design Engineer
• Senior Electrical Design Engineer
• Lead Electrical Design Engineer

Get advice on each section of your resume:

Jump to a resource:

• Electrical Design Engineer Resume Tips

Electrical Design Engineer Resume Template

Download in google doc, word or pdf for free. designed to pass resume screening software in 2022., electrical design engineer resume sample.

Electrical design engineers are responsible for designing the systems that conduct and carry energy. They may work in a variety of industries on a plethora of products. The electrical design engineer uses software programs and technical skills to design and test systems that will be later implemented in the manufacturing process. To become an electrical design engineer, start in the classroom. Hiring managers will be looking for a candidate with a bachelor's degree in electrical engineering. You’ll need specific skills, such as experience using autoCAD and MATLAB. You will also need to demonstrate experience designing and implementing electrical systems. Good candidates for this role will have prior work experience in related roles such as prior roles as an electrical engineer, mechanical technician, or mechanical supervisor. Most importantly, ideal candidates for this role will be innovative thinkers, creative designers, and effective problem solvers.

We're just getting the template ready for you, just a second left.

Recruiter Insight: Why this resume works in 2022

Tips to help you write your electrical design engineer resume in 2024,    demonstrate your ability to create innovative designs to land the role of electrical design engineer.

Since electrical design engineers are responsible for creating effective and innovative designs, it’s important to demonstrate your experience in crafting electrical designs, such as building circuit boards. You can use projects from previous roles or projects you completed during your university studies to demonstrate this on a resume.

   Show your experience improving previous designs

Sometimes electrical design engineers will be asked to take a pre-existing design and improve it. This can be harder to do because the engineer needs to work within constraints. It’s important to demonstrate your ability to work with and improve existing designs on your resume.

An electrical design engineer conducts research and creates designs for new electrical systems. They also develop and test these systems, making any necessary changes as they go. You’ll need a strong knowledge of electrical theory and design software for this role, so your resume should highlight your technical skills as well as your educational background.

   List both electrical and design technical skills in skills section

To become an electrical design engineer , you’ll need to be fluent in computing languages such as MATLAB, and you should also be familiar with design tools like CAD software. Having the right technical skills for the job is essential, so make sure to list your computing and software proficiencies in a skills section on your resume.

   Highlight your education section on your resume especially if it’s relevant

While this candidate has an impressive work history within electrical design, it’s worth noting that he or she holds a Bachelor’s degree in Engineering along with a Master’s degree in Electrical Design. Your educational background becomes less important than work experience as you advance in your career, but if you have advanced degrees within a relevant field, don’t skip mentioning them on your resume.

Senior Electrical Design Engineer Resume Sample

Lead electrical design engineer resume sample.

We interviewed hiring managers from top companies like Tesla, Lockheed Martin, and Boeing to understand what they look for in electrical design engineer resumes. They consistently shared that the best resumes highlight the candidate's ability to design and develop electrical systems, components, and products that meet specific requirements and standards. The tips below will help you create a strong resume that showcases your skills and experience in this field.

   Showcase your technical skills and expertise

Highlight your proficiency in key technical skills that are essential for electrical design engineers, such as:

• Circuit design and analysis using tools like SPICE, Altium Designer, or Eagle CAD
• Experience with microcontrollers, FPGAs, and embedded systems programming in C, C++, or Assembly
• Knowledge of industry standards and regulations, such as IPC, UL, or CE
• Familiarity with simulation and modeling tools like MATLAB, Simulink, or LabVIEW

Quantify your experience where possible to show the depth of your expertise. For example:

Designed and developed 15+ PCB layouts using Altium Designer, resulting in a 20% reduction in board size and 30% improvement in signal integrity.

   Highlight your problem-solving skills with specific examples

Employers want to see that you can apply your technical knowledge to solve real-world problems. Use specific examples to demonstrate your problem-solving skills:

• Troubleshot and resolved a critical issue with a power supply circuit, reducing downtime by 80% and saving $50,000 in potential lost revenue.
• Developed a custom test fixture that improved testing efficiency by 50% and reduced the number of defective units shipped to customers by 95%.

Avoid generic statements that don't provide any context or results, such as:

• Solved various technical problems
• Troubleshot issues with electrical systems

   Demonstrate your experience with the product development lifecycle

Show that you understand the entire product development process, from concept to production. Highlight your experience with:

• Collaborating with cross-functional teams, such as mechanical engineers, software developers, and product managers
• Creating and maintaining design documentation, such as schematics, BOMs, and test procedures
• Conducting design reviews and ensuring that designs meet functional, performance, and reliability requirements
• Supporting the transition from prototype to production, including design for manufacturability (DFM) and testing

Use specific examples to illustrate your contributions at each stage. For instance:

Led the electrical design of a new industrial control system, collaborating with a team of 5 engineers. Completed the project 2 weeks ahead of schedule and 10% under budget, resulting in a successful product launch with first-year sales of $2M.

   Include relevant projects and achievements

In addition to your professional experience, include academic or personal projects that showcase your electrical design skills and passion for the field. For example:

• Designed and built a custom Arduino-based weather station that collected and transmitted data wirelessly, demonstrating skills in embedded systems, sensor integration, and wireless communication protocols.
• Developed a battery management system for a university electric vehicle project, resulting in a 30% increase in driving range and a 2nd place finish in a national competition.

If you have any patents, publications, or awards related to electrical design, make sure to highlight them as well. These achievements demonstrate your innovation and expertise in the field.

   Tailor your resume to the specific job requirements

Customize your resume for each job application to show how your skills and experience align with the specific requirements of the position. For example:

• Generic bullet point: Designed and developed electrical systems for various products

Instead, tailor your bullet point to the job:

• Tailored bullet point: Designed and developed high-voltage power electronics for electric vehicle charging systems, aligning with the company's focus on sustainable transportation solutions.

Use keywords from the job description to demonstrate your fit for the role, but avoid simply copying and pasting the exact phrases. Instead, provide specific examples of how you've applied those skills in your previous roles.

   Highlight your communication and collaboration skills

Electrical design engineers often work closely with other teams and stakeholders, so it's essential to showcase your communication and collaboration skills. Use examples that demonstrate your ability to:

• Clearly explain technical concepts to non-technical audiences, such as marketing or sales teams
• Work effectively with cross-functional teams to achieve project goals and meet deadlines
• Collaborate with suppliers and manufacturers to ensure successful product development and production

For example:

Presented technical design proposals to executive leadership, securing approval and funding for a $500K project that increased production efficiency by 25%.

By highlighting your communication and collaboration skills, you show that you can effectively contribute to the success of the organization beyond your technical expertise.

Writing Your Electrical Design Engineer Resume: Section By Section

  summary.

A resume summary for an Electrical Design Engineer is an optional section that goes at the top of your resume. It provides a brief overview of your most relevant qualifications, skills, and experience. While not required, it can be a useful way to provide additional context about your background and highlight key details that may not be immediately apparent from the rest of your resume.

However, it's important to avoid using an objective statement in place of a summary. Objective statements are outdated and focus on what you want from an employer, rather than what you can offer them. Instead, use your summary to showcase your value and entice the hiring manager to keep reading.

To learn how to write an effective resume summary for your Electrical Design Engineer resume, or figure out if you need one, please read Electrical Design Engineer Resume Summary Examples , or Electrical Design Engineer Resume Objective Examples .

1. Tailor your summary to the specific electrical design role

When writing your summary, it's important to tailor it to the specific electrical design role you're applying for. This means highlighting the skills and experience that are most relevant to that particular position.

For example, a bad summary might look like this:

Experienced electrical engineer with a proven track record of success. Skilled in a variety of electrical design software and tools. Seeking a challenging new opportunity to utilize my skills and expertise.

This summary is too generic and could apply to almost any electrical engineering role. Instead, try something like this:

Skilled electrical design engineer with 5+ years of experience in PCB design and schematic capture for consumer electronics. Proficient in Altium Designer and Eagle CAD. Proven ability to collaborate with cross-functional teams to bring products from concept to production.

This summary is much more specific and highlights the candidate's relevant skills and experience in PCB design and consumer electronics.

2. Quantify your achievements and impact where possible

When writing your summary, it's important to quantify your achievements and impact where possible. This helps to provide concrete evidence of your skills and experience, and makes your summary more compelling to a potential employer.

For example, instead of simply saying:

• Experienced in designing and developing electrical systems

Try something like:

• Designed and developed 10+ electrical systems for industrial automation equipment, resulting in a 15% increase in efficiency and a 20% reduction in downtime

By quantifying your achievements, you provide a clear picture of the value you can bring to the role and the impact you've had in previous positions.

  Experience

The work experience section is the heart of your electrical design engineer resume. It's where you showcase your engineering achievements, technical skills, and career progression. Hiring managers and recruiters want to see specific examples of how you've applied your expertise to real-world projects and the impact you've made.

In this section, we'll break down the key steps to writing a compelling work experience section that will catch the attention of employers and help you land your next electrical design engineer job.

1. Use strong electrical engineering action verbs

When describing your work experience, use powerful action verbs that are specific to electrical engineering and design. This helps to highlight your technical skills and expertise. Compare the following examples:

• Worked on circuit designs for new products
• Helped with testing and debugging of electrical systems

Instead, use strong verbs like:

• Designed and developed high-efficiency power converters for renewable energy systems, resulting in a 15% increase in energy output
• Analyzed and debugged complex electrical schematics, identifying and resolving 20+ design issues

2. Quantify your impact with metrics

Whenever possible, use numbers and metrics to quantify your achievements and show the impact of your work. This helps employers to understand the scope and significance of your contributions. For example:

• Developed and implemented a new testing protocol that reduced defect rates by 25% and saved the company $500K annually
• Spearheaded the design of a custom industrial control system, completing the project 10% under budget and 2 weeks ahead of schedule
• Collaborated with cross-functional teams to deliver 5 successful product launches, contributing to a 20% increase in market share

3. Highlight relevant technical skills and tools

Employers want to know that you have experience with the specific tools, software, and methodologies they use. Weave relevant technical skills and tools into your work experience bullets. For example:

Utilized Altium Designer to create PCB layouts and schematics for high-speed digital interfaces, ensuring optimal signal integrity and EMC compliance

Some key skills and tools to mention for electrical design engineers include:

• EDA software (e.g. Altium, OrCAD, Eagle)
• Simulation tools (e.g. SPICE, Simulink, ANSYS)
• Programming languages (e.g. C, C++, VHDL)
• Power electronics and control systems
• PCB design and layout

4. Show career growth and progression

Recruiters and hiring managers like to see evidence of career growth and progression on your resume. If you've been promoted or taken on increasing levels of responsibility, make sure to highlight that in your work experience section. For example:

Electrical Design Engineer II, ABC Company (2018-Present) - Promoted from Electrical Design Engineer I after 2 years, based on strong performance and technical expertise - Lead design engineer for a team of 5, overseeing the development of industrial automation systems from concept to implementation - Mentor junior engineers and provide technical guidance to ensure design quality and efficiency

If you don't have a formal promotion, you can still show growth by highlighting how your responsibilities and projects have increased in scope and complexity over time.

  Education

Your education section is a key part of your electrical design engineer resume. It shows hiring managers that you have the necessary academic background and technical skills for the role. In this section, we'll cover what to include and how to format your education on your resume.

1. List your degrees in reverse chronological order

Start with your most recent or highest degree first. For each degree, include:

• Name of the degree (e.g. Bachelor of Science in Electrical Engineering)
• University name and location
• Graduation year

Here's an example of how to list your education:

Master of Science in Electrical Engineering, ABC University, New York, NY, 2019 Bachelor of Science in Electrical Engineering, XYZ College, Boston, MA, 2017

2. Include relevant coursework if you're a recent graduate

If you graduated within the past 1-2 years and don't have much work experience yet, you can boost your resume by listing relevant coursework. This shows employers that you have specific knowledge and skills related to electrical design engineering.

Here's an example of how to list coursework:

Bachelor of Science in Electrical Engineering, XYZ University, Graduated 2022 Relevant Coursework: Circuit Analysis, Digital Signal Processing, Embedded Systems Design, Control Systems

3. Keep your education section concise if you're a senior engineer

If you have 10+ years of experience as an electrical design engineer, your work experience is more important than your education at this stage. You can keep your education section very brief, like this:

M.S. Electrical Engineering, ABC University B.S. Electrical Engineering, XYZ College

Contrast this with an example of what not to do as a senior electrical design engineer:

Master of Science in Electrical Engineering, ABC University, New York, NY, 1995 Thesis: Design and Implementation of a High-Speed Digital Communication System Bachelor of Science in Electrical Engineering, XYZ College, Boston, MA, 1993 Graduated Summa Cum Laude, GPA 3.95

As an experienced professional, there's no need to list your GPA, thesis, or graduation honors from decades ago. Keep the focus on your impressive work achievements instead.

  Skills

The skills section of your electrical design engineer resume is a critical component that showcases your technical abilities and expertise to potential employers. It's important to carefully select and highlight the most relevant skills that align with the job requirements and demonstrate your value as a candidate.

1. Identify relevant technical skills

When crafting your skills section, focus on the technical skills that are most relevant to the electrical design engineer role you're targeting. Review the job description carefully and identify the key skills and qualifications the employer is seeking.

Some essential technical skills for electrical design engineers may include:

• Design Software : AutoCAD, MATLAB, Altium Designer, Eagle
• Programming Languages : C++, Python, VHDL
• Electrical Systems : Circuit design, PCB layout, power systems
• Testing and Debugging : Oscilloscopes, multimeters, logic analyzers

Tailor your skills section to each job application by highlighting the skills that match the requirements listed in the job description. This will help your resume pass through Applicant Tracking Systems (ATS) and catch the attention of hiring managers.

2. Use proficiency levels to showcase expertise

When listing your skills, consider using proficiency levels to indicate your level of expertise in each area. This helps employers quickly gauge your capabilities and determine if you're a good fit for the role.

Here's an example of how you can format your skills section with proficiency levels:

Design Software : AutoCAD (Expert), MATLAB (Advanced), Altium Designer (Intermediate) Programming Languages : C++ (Expert), Python (Advanced), VHDL (Beginner) Electrical Systems : Circuit design (Expert), PCB layout (Advanced), Power systems (Intermediate)

Avoid simply listing skills without any context or proficiency levels, like this:

Skills: AutoCAD, MATLAB, C++, Python, Circuit design, PCB layout

Be honest about your proficiency levels and avoid overstating your abilities. If you're unsure about your level of expertise, consider using tools like Resume Worded's Score My Resume to get instant feedback on your skills section and ensure it effectively showcases your qualifications.

3. Highlight industry-specific skills and certifications

In addition to technical skills, consider including industry-specific skills and certifications that are relevant to electrical design engineering. These may include knowledge of industry standards, safety protocols, or specific manufacturing processes.

• IPC standards (IPC-2221, IPC-7351)
• Electrical safety standards (NFPA 70, IEEE 1584)
• Lean Six Sigma certification
• EIT (Engineer in Training) certification

Including these industry-specific skills and certifications demonstrates your knowledge and commitment to the field, making you a more competitive candidate.

Keep your skills section concise and focused on the most relevant and impressive qualifications. Avoid listing outdated or irrelevant skills that may distract from your core strengths as an electrical design engineer.

4. Optimize for Applicant Tracking Systems (ATS)

Many companies use Applicant Tracking Systems (ATS) to screen resumes and filter out candidates who don't meet the required qualifications. To increase your chances of passing through ATS, make sure to include relevant keywords from the job description in your skills section.

For example, if the job description mentions specific software like AutoCAD or MATLAB, make sure to include those exact terms in your skills section. Similarly, if the job requires experience with certain electrical systems or programming languages, incorporate those keywords as well.

Skills: Design Software : AutoCAD, MATLAB, Altium Designer Programming Languages : C++, Python, VHDL Electrical Systems : Circuit design, PCB layout, Power systems

To ensure your resume is optimized for ATS and includes the right keywords, consider using Resume Worded's Targeted Resume tool. This tool analyzes your resume against a specific job description and provides feedback on how well your skills section aligns with the requirements, helping you create a targeted and effective resume.

Skills For Electrical Design Engineer Resumes

Here are examples of popular skills from Electrical Design Engineer job descriptions that you can include on your resume.

• Building Services
• Transformer
• Electrical Engineering
• Electrical Panel Design
• Programmable Logic Controller (PLC)
• Power Systems

Skills Word Cloud For Electrical Design Engineer Resumes

This word cloud highlights the important keywords that appear on Electrical Design Engineer job descriptions and resumes. The bigger the word, the more frequently it appears on job postings, and the more likely you should include it in your resume.

How to use these skills?

Similar resume templates.

Director of Software Engineering

Site Reliability Engineer

• Node.js Resume Guide
• Technical Support Resume Guide
• AWS Resume Guide
• DevOps Resume Guide
• Packaging Engineer Resume Guide

Resume Guide: Detailed Insights From Recruiters

• Electrical Engineer Resume Guide & Examples for 2022

Improve your Electrical Design Engineer resume, instantly.

Use our free resume checker to get expert feedback on your resume. You will:

•  Get a resume score compared to other Electrical Design Engineer resumes in your industry.

•  Fix all your resume's mistakes.

•  Find the Electrical Design Engineer skills your resume is missing.

•  Get rid of hidden red flags the hiring managers and resume screeners look for.

It's instant, free and trusted by 1+ million job seekers globally. Get a better resume, guaranteed .

Electrical Design Engineer Resumes

• Template #1: Electrical Design Engineer
• Template #2: Electrical Design Engineer
• Template #3: Electrical Design Engineer
• Template #4: Senior Electrical Design Engineer
• Template #5: Lead Electrical Design Engineer
• Skills for Electrical Design Engineer Resumes
• Free Electrical Design Engineer Resume Review
• Other Engineering Resumes
• Electrical Design Engineer Interview Guide
• Electrical Design Engineer Sample Cover Letters
• Alternative Careers to a Electrical Design Engineer
• All Resumes
• Resume Action Verbs

Download this PDF template.

Creating an account is free and takes five seconds. you'll get access to the pdf version of this resume template., choose an option..

• Have an account? Sign in

E-mail Please enter a valid email address This email address hasn't been signed up yet, or it has already been signed up with Facebook or Google login.

Password Show Your password needs to be between 6 and 50 characters long, and must contain at least 1 letter and 1 number. It looks like your password is incorrect.

Remember me

Forgot your password?

Sign up to get access to Resume Worded's Career Coaching platform in less than 2 minutes

Name Please enter your name correctly

E-mail Remember to use a real email address that you have access to. You will need to confirm your email address before you get access to our features, so please enter it correctly. Please enter a valid email address, or another email address to sign up. We unfortunately can't accept that email domain right now. This email address has already been taken, or you've already signed up via Google or Facebook login. We currently are experiencing a very high server load so Email signup is currently disabled for the next 24 hours. Please sign up with Google or Facebook to continue! We apologize for the inconvenience!

Password Show Your password needs to be between 6 and 50 characters long, and must contain at least 1 letter and 1 number.

Receive resume templates, real resume samples, and updates monthly via email

By continuing, you agree to our Terms and Conditions and Privacy Policy .

Lost your password? Please enter the email address you used when you signed up. We'll send you a link to create a new password.

E-mail This email address either hasn't been signed up yet, or you signed up with Facebook or Google. This email address doesn't look valid.

Back to log-in

These professional templates are optimized to beat resume screeners (i.e. the Applicant Tracking System). You can download the templates in Word, Google Docs, or PDF. For free (limited time).

   access samples from top resumes, get inspired by real bullet points that helped candidates get into top companies.,    get a resume score., find out how effective your resume really is. you'll get access to our confidential resume review tool which will tell you how recruiters see your resume..

Writing an effective resume has never been easier .

Upgrade to resume worded pro to unlock your full resume review., get this resume template (+ 12 others), plus proven bullet points., for a small one-time fee, you'll get everything you need to write a winning resume in your industry., here's what you'll get:.

• 📄 Get the editable resume template in Google Docs + Word . Plus, you'll also get all 12 other templates .
• ✍️ Get sample bullet points that worked for others in your industry . Copy proven lines and tailor them to your resume.
• 🎯 Optimized to pass all resume screeners (i.e. ATS) . All templates have been professionally designed by recruiters and 100% readable by ATS.

Buy now. Instant delivery via email.

  instant access. one-time only., what's your email address.

I had a clear uptick in responses after using your template. I got many compliments on it from senior hiring staff, and my resume scored way higher when I ran it through ATS resume scanners because it was more readable. Thank you!

Thank you for the checklist! I realized I was making so many mistakes on my resume that I've now fixed. I'm much more confident in my resume now.

• Data Science
• Data Analysis
• Data Visualization
• Machine Learning
• Deep Learning
• Computer Vision
• Artificial Intelligence
• AI ML DS Interview Series
• AI ML DS Projects series
• Data Engineering
• Web Scrapping

How to Get an Big Data Engineer Internship in 7 Steps

A Big Data Engineer designs and manages systems that handle large volumes of data. This role is vital in industries like Tech, Finance, and Healthcare , where data-driven decision-making is key. Big data engineers ensure data is collected, stored, and processed efficiently. An internship in this field provides practical experience and deepens your understanding of data systems. It also opens doors to full-time roles and career advancement.

How to Get an Internship as a Big Data Engineer

This article will cover developing relevant skills, creating a strong resume, building a portfolio, networking with professionals, applying to internships, and preparing for interviews.

Table of Content

Step by Step guide to get Internship On Big Data

Step 1: build your foundation, step 2: develop relevant skills, step 3: gain hands-on practice, step 4: create a strong resume, step 5: network with professionals, step 6: apply to internships, step 7: prepare for interviews.

Securing an internship in big data can be a great way to gain hands-on experience in a rapidly growing field. Here’s a structured guide with steps and tips to help you land that internship:

• Educational Background: Ensure you have a strong understanding of computer science fundamentals, statistics, and mathematics.
• Relevant Courses: Take courses in data science, machine learning, databases, and programming languages like Python, R, Java, or Scala.

To secure an internship as a big data engineer, you need a robust set of technical skills. Start by mastering programming languages such as Python , Java , and Scala , which are essential for handling big data. Familiarity with big data frameworks like Hadoop and Spark is also crucial. Understanding database technologies, including SQL and NoSQL, is necessary for managing large datasets effectively. Online courses and certifications can help you gain these skills and make you a strong candidate for internships.

Key skills to develop include:

• Programming Languages: Focus on Python, Java, and Scala, which are widely used in big data. These languages are fundamental for developing and maintaining big data applications.
• Big Data Frameworks: Gain hands-on experience with Hadoop and Spark to manage and process large datasets. These frameworks are essential for distributed data processing and analysis.
• Database Technologies: Learn SQL for relational databases and NoSQL for non-relational databases like MongoDB and Cassandra. Understanding both types of databases is crucial for handling various data storage needs.
• Data Processing Tools: Familiarise yourself with tools like Apache Kafka for real-time data processing and ETL (Extract, Transform, Load) tools for data integration. These tools are essential for managing data flows and ensuring data quality.
• Cloud Platforms: Understand how to use cloud services like AWS, Google Cloud, or Azure for big data storage and processing. Cloud platforms provide scalable and flexible resources for handling large volumes of data.
• Projects: Start personal or open-source projects that involve data analysis, processing, and visualization. Kaggle competitions are a great way to practice and showcase your skills.
• Hackathons: Participate in hackathons related to data science and big data to enhance your problem-solving skills

A well-crafted resume is essential for showcasing your qualifications and experiences. Your resume should highlight your educational background, relevant coursework, and any practical experience in big data. Ensure that your resume is well-organised, easy to read, and free of errors. Using a professional format and including relevant keywords can help your resume stand out.

To make your resume compelling, include the following sections:

• Contact Information: Ensure your name, phone number, and email address are easily accessible. Include a link to your LinkedIn profile or GitHub repository if applicable.
• Objective Statement: Write a brief statement summarising your career goals and what you aim to achieve in the internship. This helps employers quickly understand your aspirations and suitability for the role.
• Education: List your academic qualifications, starting with the most recent. Include the name of the institution, degree obtained, and graduation date.
• Experience: Detail any internships, part-time jobs, or volunteer work related to big data or data engineering. Highlight your responsibilities and achievements in each role, using action verbs and quantifiable results where possible.
• Skills: Include a section dedicated to your technical and soft skills. Focus on those relevant to a big data engineer role, such as programming languages, big data frameworks, and database technologies.
• Certifications and Training: Mention any additional certifications or training programs you have completed. This could include courses on big data, data science, or specific software tools.
• Projects: Describe any independent or academic projects where you applied your big data skills. Provide details on the objectives, methodologies, and outcomes of these projects to showcase your practical experience.

Networking with professionals is vital for securing a big data engineer internship. Building connections can open doors to opportunities and provide valuable industry insights. Start by attending industry events, joining relevant online communities, and participating in workshops. Networking helps you learn from experienced professionals and stay updated with the latest trends and technologies in big data.

To effectively network with professionals, consider the following strategies :

• Attend Industry Events: Participate in conferences, meetups, and seminars related to big data. These events offer opportunities to meet professionals, learn about industry developments, and share your own insights.
• Join Online Communities: Engage with online forums and social media groups focused on big data. Platforms like LinkedIn, Reddit, and Kaggle host active communities where you can connect with industry experts.
• Informational Interviews: Reach out to big data professionals for informational interviews. Ask them about their career paths, daily responsibilities, and advice for entering the field. This can provide valuable insights and help you build connections.
• University Alumni Networks: Connect with alumni from your university who are working in big data. Alumni can offer guidance, mentorship, and potentially refer you to job opportunities within their companies.
• Participate in Workshops and Hackathons : Join workshops and hackathons to hone your skills and network with peers and industry professionals. These events provide hands-on experience and opportunities to collaborate with others in the field.
• Utilise LinkedIn: Use LinkedIn to connect with professionals, follow companies, and join groups related to big data. Engage with posts, share your own content, and participate in discussions to build your online presence.

Applying to internships is a critical step in securing a position as a big data engineer. It requires careful preparation and strategic effort to ensure your application stands out. Start by identifying companies that offer big data internships and researching each one thoroughly. Tailor your resume and cover letter to highlight the skills and experiences that match the job description. Applying to a wide range of internships can increase your chances of success. It is also important to follow up on your applications to show your enthusiasm and interest.

To effectively apply to internships, consider the following steps:

• Research Companies: Identify companies with big data internship programs. Look into their business model, products, and company culture to ensure a good fit. In India, companies like TCS, Wipro, and Infosys offer relevant internships.
• Tailor Your Application: Customize your resume and cover letter for each internship. Highlight relevant skills and experiences that align with the job description. Use keywords from the job listing to pass through applicant tracking systems.
• Utilise Job Boards: Use job search platforms such as Naukri, LinkedIn, and Internshala. These sites often have a wide range of internship listings and allow you to set up job alerts.
• University Career Centres: Take advantage of your university’s career centre resources. They often have exclusive listings and can provide guidance on your application materials. Institutes like IITs and NITs frequently have connections with top companies.
• Networking Contacts: Leverage your professional network for referrals and recommendations. Connections within a company can improve your chances of landing an interview. Reach out to alumni or professionals you met at industry events.
• Follow Up: After submitting your application, follow up with the hiring manager. A polite email expressing your continued interest can keep your application top of mind.

Preparing for interviews is a crucial step in securing a big data engineer internship. It involves understanding the company, practicing common interview questions, and showcasing your skills effectively. Practicing your responses to common interview questions can boost your confidence. Additionally, being able to discuss your resume and portfolio in detail is essential for making a positive impression.

To prepare effectively for interviews, consider the following steps:

• Research the Company: Understand the company’s mission, values, products, and services. Knowing recent news or developments about the company can also be beneficial. This demonstrates your genuine interest and helps tailor your answers to align with the company’s goals.
• Practice Common Questions: Prepare answers for common interview questions like “Tell me about yourself,” “Why do you want this internship?” and “What are your strengths and weaknesses?” Practicing these responses can help you communicate more clearly and confidently.
• Showcase Your Skills: Be ready to discuss your resume and portfolio in detail. Highlight your relevant skills, experiences, and achievements. Use specific examples to demonstrate how you have applied your skills in previous roles or projects.
• Mock Interviews: Conduct mock interviews with friends, family, or mentors. This can help you get used to the interview format and receive constructive feedback. Mock interviews can also reduce anxiety by familiarising you with the interview process.
• Prepare Technical Questions: Review common technical questions related to big data, such as algorithm explanations and coding challenges. Practice solving problems on platforms like GeeksforGeeks, LeetCode or HackerRank to sharpen your skills.

Additional Tips

• Stay Current: The field of big data evolves rapidly, so keep learning about the latest trends, tools, and technologies.
• Soft Skills: Work on communication, teamwork, and problem-solving skills. Big data projects often require collaboration across different teams.
• Internship Goals: Set clear goals for what you want to achieve during your internship. Whether it’s learning new technologies, working on a specific project, or gaining industry experience, having goals can help you stay focused.

Securing a big data engineer internship requires preparation and strategic effort. Focus on developing relevant skills and creating a strong resume. Build a compelling portfolio to showcase your abilities. Network with professionals to open doors to opportunities. Apply strategically and prepare thoroughly for interviews. Following these steps will help you land an internship and start your career in big data.

Please Login to comment...

Similar reads.

• Data Science Blogathon 2024
• AI-ML-DS Blogs

Improve your Coding Skills with Practice

What kind of Experience do you want to share?

How to Become a Structural Engineer: Steps and Requirements

Author: University of North Dakota June 20, 2024

Imagine a world where bridges tremble under the strain of everyday traffic, buildings crumble without a moment's notice and stadiums falter under the weight of their occupants.

Request Information

These scenarios are not just disastrous but could become our harsh reality without the critical expertise of structural engineers. 

These professionals' work safeguards our infrastructure, making this field absolutely essential to modern civilization. The role of a structural engineer is integral in maintaining the safety and stability of the environments we live and work in every day. 

If you're intrigued by the challenge of upholding such crucial standards and want to contribute to society's safety, keep reading to learn how to become a structural engineer. Let's build your foundation of knowledge and engineer a pathway into this career.

What is a Structural Engineer?

A structural engineer is a professional in the field of civil engineering who specializes in designing and analyzing structural systems crucial for supporting or resisting various loads. Tasked with a profound responsibility, these engineers ensure that buildings, bridges and an array of other structures are safe, stable and strong enough to withstand forces such as gravity, weather conditions and everyday use by humans.

What Does a Structural Engineer Do?

A structural engineer's day-to-day tasks involve a mix of analysis, design and communication to ensure the integrity and safety of various structures. Some of the specific responsibilities they hold include:

• Using mathematical models and software to predict how structures will withstand forces and stresses 
• Creating plans for elements like beams, columns and floors that are capable of enduring different types of loads 
• Working alongside architects to integrate structural requirements with aesthetic and functional designs 
• Verifying that designs adhere to local and national safety standards and regulations 
• Visiting sites to ensure construction adheres to the plans and safety norms 
• Advising on alterations to existing structures to improve safety or functionality 
• Documenting analysis findings, project progress and compliance with codes 
• Overseeing project timelines, budgets and resource allocation 
• Ensuring that all parties are aligned on the project specifications and changes 
• Evaluating potential risks related to structural integrity and environmental impacts 
• Advising on the best materials and construction techniques for optimal structural performance 
• Assisting teams in understanding complex structural concepts and applications 

How to Become a Structural Engineer

Becoming a structural engineer requires formal education, practical training and obtaining licensure. Each step is designed to build upon the last, equipping aspiring engineers with the necessary skills, knowledge and credentials to succeed in this critical field. Below, we'll explore step by step how to become a structural engineer.

Earn a Bachelor's Degree

Firstly, starting a career as a structural engineer requires earning a bachelor's degree in civil engineering or a field closely related to it, such as architectural engineering with a focus on structures. This initial academic foundation is essential because it introduces students to fundamental engineering principles, along with the mathematics and science necessary to analyze and solve complex structural issues. 

The coursework during this degree includes general engineering theory as well as specialized subjects specifically designed to equip students with the skills to design, construct and maintain infrastructures ranging from bridges to skyscrapers. 

These courses are meticulously structured to prepare graduates for the diverse technical challenges they will encounter in the professional world, laying the groundwork for successful careers in structural engineering.

Gain Work Experience

Once they have earned their degree, aspiring structural engineers must seek practical experience to build upon their academic foundation. This essential next step typically involves participating in internships, cooperative (co-op) education programs or securing entry-level positions in engineering firms.

These real-world opportunities are crucial as they allow new graduates to apply their classroom knowledge to actual engineering projects. Engaging directly in the field helps budding engineers develop practical skills, such as how to effectively communicate with project teams, manage deadlines and apply engineering principles to solve real problems. Moreover, these experiences give them a firsthand look at the day-to-day responsibilities of a structural engineer, from conducting site inspections to drafting technical reports.

Earn a Master's Degree 

Pursuing a master's degree in civil engineering or structural engineering, while not always required, can significantly enhance one's expertise and career opportunities in the field. These advanced programs allow for deeper specialization and provide a more thorough understanding of complex topics such as seismic design, structural dynamics and the use of advanced materials in construction.

For those eager to advance even further into research and specialized knowledge, earning a Ph.D. in civil engineering can be a transformative step. A doctorate opens up opportunities for academic careers and high-level research positions, setting individuals apart as experts in their field.

Obtain a PE License

Finally, obtaining a Professional Engineering (PE) license is essential for structural engineers who want to advance in their careers. This licensure process begins with passing the Fundamentals of Engineering (FE) exam, which candidates usually take shortly after earning their bachelor's degree. 

After accumulating the necessary work experience, typically around four years, engineers are then eligible to take the Principles and Practice of Engineering exam, specifically focusing on structural engineering.

Securing a PE license is more than a professional milestone; it validates an engineer's expertise and commitment to maintaining industry standards. With this license, structural engineers gain the authority to supervise other engineers, approve and sign off on structural designs and take on several other critical responsibilities that ensure the safety and reliability of engineering projects.

Work Environment

Structural engineers work in various settings, depending on the nature of their projects. They're primarily found in office environments, designing structures and planning projects. However, their roles also extend beyond the office to construction sites, where they oversee the implementation of their designs and ensure compliance with their plans. 

Additionally, structural engineers frequently visit existing structures to conduct assessments and inspections, ensuring that buildings and infrastructures remain safe and secure throughout their use.

Skills Required for a Structural Engineer

Success as a structural engineer demands a specific set of skills and competencies, including but not limited to:

• Ability to solve complex problems through logical reasoning and detailed analysis
• Skilled use of industry-specific software, such as AutoCAD, Revit and SAP2000, for designing and modeling structures
• Strong grasp of calculus, statistics and other mathematical principles critical for engineering calculations
• Meticulous attention to detail to ensure the safety and compliance of structural designs
• Capability to oversee projects from conception through completion, managing time, resources and personnel effectively
• Clear and effective communication, both written and verbal, to articulate complex information to non-engineers and collaborate with teams
• Comprehensive understanding of current building codes, regulations and safety standards
• Ability to perform site visits and analyze construction environments to ensure alignment with design specifications
• Creativity in designing safe, functional but also cost-efficient and innovative structures

Job Outlook and Salary

The job outlook for civil engineering, which includes structural engineering, is positive. Employment is expected to grow by 5% from 2022 to 2032, reflecting ongoing needs for infrastructure improvements and modernizations.

In terms of compensation, structural engineers in the United States typically earn a substantial income, with an average annual wage nearing six figures at $99,400 . Moreover, those in the top percentile of the field can earn up to $152,000 per year, highlighting the lucrative potential for those with advanced skills and experience.

As societies continue to grow and the demand for innovative and sustainable infrastructure increases, the role of structural engineers becomes even more crucial. The field offers a rewarding career path with the opportunity for professional growth, high compensation and a tangible sense of accomplishment as engineers see their projects shape the physical world. 

For those with a passion for problem-solving, design and engineering, a career in structural engineering can be a fulfilling pursuit that makes a significant difference in the world around us.

So, explore the UND's undergraduate and graduate programs tailored to launch your career in civil engineering and its various disciplines, including an exceptional accelerated Civil Engineering degree program that enables students to progress swiftly through their studies. 

Join UND and build a solid foundation for your future in a program that does more than teach you how to construct environments; it prepares you to transform them.

How long does it take to become a structural engineer? ( Open this section)

It typically takes about six to eight years to become a structural engineer: four years to earn a bachelor's degree in civil or structural engineering, followed by two to four years of work experience required to qualify for the PE license.

How important is a PE license for structural engineers? ( Open this section)

A PE license is crucial for structural engineers as it legitimizes their expertise, allows them to approve and sign off on projects and is often required for senior positions and private consultancy.

What are the challenges faced by structural engineers? ( Open this section)

Structural engineers face challenges such as ensuring the structural integrity and safety of designs under budget constraints, adapting to evolving building codes and regulations as well as managing the multidisciplinary coordination required during large projects.

Can structural engineers work internationally? ( Open this section)

Yes, structural engineers can work internationally, especially if they have credentials recognized in other countries or work for multinational companies that engage in cross-border projects. Knowledge of local codes and regulations as well as linguistic and cultural proficiency, enhances their opportunities abroad.

By clicking any link on this page you are giving your consent for us to set cookies, Privacy Information .

• Onsite training

3,000,000+ delegates

15,000+ clients

1,000+ locations

• KnowledgePass
• Log a ticket

01344203999 Available 24/7

Tips to Create a Cloud Security Engineer Resume

Read this blog to craft a top-notch Cloud Security Engineer Resume with our step-by-step guide. Learn how to effectively impress the potential employers. Elevate your cybersecurity skills and career and land your dream job with a professionally tailored resume. Let’s dive in to explore some tailored sample resumes!

Exclusive 40% OFF

Training Outcomes Within Your Budget!

We ensure quality, budget-alignment, and timely delivery by our expert instructors.

Share this Resource

• Chief Information Security Officer Training
• CISSP-ISSAP Training & Certification
• CISSP Certification
• Information Systems Security Management Training

Willing to embark on a Cloud Security Engineering career? Crafting the perfect Cloud Security Engineer Resume is your initial step towards securing your dream job in the cloud industry. But where do you begin? How do you encapsulate your expertise in a document that stands out from the rest?  

You might know that security is paramount in the ever-evolving cloud technology domain. Your resume should showcase your technical skills besides your vigilance and commitment to protecting sensitive data.   

This blog will take you through creating a Cloud Security Engineer Resume that highlights your strengths and aligns with industry standards. With actionable steps and expert tips, you’ll learn how to construct a resume that resonates with hiring managers. Let’s elevate your professional narrative and pave the way for a successful Cloud Security career. 

Table of Contents 

1) Key Elements Recruiters Look for in a Resume 

2) Tips to Structure a Cloud Security Engineer CV 

3) Sample Cloud Security Engineer CV 

4) Adding Your CCSP Certification to Your LinkedIn Profile 

5) Approaches for Candidates With Limited or no Experience 

6) Conclusion 

Key Elements Recruiters Look for in a Resume  

Recruiters favour resumes that present a succinct and articulate overview of one’s professional journey. Essential components for your Cloud Security Engineer Resume should include the following: 

a) Proficiency in Cloud Technologies: Familiarity with cloud service providers, that include Amazon Web Services (AWS), Azure, and Google Cloud, along with their respective security offerings. Possession of specialised certifications, particularly the AWS Certified Security Specialty, can be highly advantageous. 

b) Security Tools Expertise: Hands-on experience with a range of security instruments and practices, such as firewalls, Intrusion Detection Systems (IDS), encryption methodologies, Identity and Access Management (IAM), and principles of secure software development. 

c) Regulatory Knowledge: A solid grasp of compliance frameworks and regulatory mandates, including but not limited to the General Data Protection Regulation (GDPR), Health Insurance Portability and Accountability Act (HIPAA), International Organisation for Standardisation (ISO) 27001, and Security Operations Center (SOC) 2 Type II. 

d) Vulnerability Management: Competence in performing vulnerability assessments within cloud infrastructures and devising effective remediation plans. 

e) Incident Handling and Recovery: Proven track record in incident response and formulating disaster recovery strategies tailored for cloud-based operations. 

Tips to Structure a Cloud Security Engineer CV 

In the dynamic domain of Cloud Security, the presentation of your resume is pivotal in enhancing your job prospects. A meticulously organised resume not only showcases your technical prowess—essential for a Cloud Security Engineer—but also ensures readability and attractiveness to prospective employers.  

The professional layout of your resume could be the key to unlocking interview opportunities. Let's explore some tips to create this: 

1) Begin With a Compelling Professional Summary 

Initiate your resume with a persuasive professional summary that resonates with the Cloud Security engineer position you aspire to. Concisely articulate your career objectives, your acumen in Cloud Security, and your envisioned contributions to the potential employer. Emphasising your enthusiasm for the domain and your eagerness to address intricate security issues will set an affirmative tone for the remainder of your resume. 

2) Showcase Certifications and Educational Background 

Certifications such as the Certified Information Systems Security Professional (CISSP) or Certified Cloud Security Professional (CCSP) carry significant weight in Cloud Security. Strategically organise this section to highlight your certifications, academic qualifications, and pertinent coursework prominently. This arrangement enables hiring managers to swiftly assess your technical expertise and dedication to ongoing professional growth. 

3) Outline Relevant Experience and Projects 

Chronicling your involvement in Cloud Security initiatives, be it in a professional or scholarly capacity, is vital. Employ bullet points to delineate roles and accomplishments, with an emphasis on activities that exhibit your proficiency in Cloud Security design, risk mitigation, and regulatory adherence. Accentuate any hands-on experience with renowned cloud platforms such as AWS, Azure, or Google Cloud. 

Become a Cloud Security leader with our CCSP Certified Cloud Security Professional Course - register today!  

4) Balancing Technical and Interpersonal Skills 

While technical abilities like adeptness with Cloud Security mechanisms, encryption, and network defence are indispensable, soft skills should not be neglected. Dedicate a section to harmonise both, spotlighting your technical competencies alongside your capacity for effective communication, problem-solving, and teamwork. This illustrates your aptitude for managing sophisticated security duties and your potential to enhance the organisational ethos. 

5) Incorporating Publications and Speaking Engagements 

If you have authored articles, white papers, or delivered talks on Cloud Security subjects, allocate a section for these accomplishments. This not only evidences your subject-matter expertise but also your proficiency in conveying intricate concepts—a highly regarded skill in the realm of Cloud Security. 

Sample Cloud Security Engineer CV  

To impress potential employers, your Cloud Security Engineer Curriculum Vitae (CV) must highlight your strong background in deploying security controls. Let’s look at some well-tailored Cloud Security Engineer Resume samples: 

Sample 1  

Ready to lead the frontline against cyber threats? Join our Chief Information Security Officer Training to fortify your skills and protect your organisation.  

Sample 2  

Adding Your CCSP Certification to Your LinkedIn Profile 

Enhance your professional online presence by displaying your CCSP certification on LinkedIn. Follow these streamlined steps to add your CISSP Certification to your profile: 

a) Log into LinkedIn and select the “Me” icon featuring your profile picture, located in the top navigation bar. 

b) Navigate to your profile, then initiate the update process by clicking the “Add Profile section” button. 

c) Within the “Add Profile section" dropdown, locate “Licenses & Certifications” under the Background category and click the + icon to add a new entry. 

d) Complete the form with the certification’s name, the issuing organisation, the date of issue, and the expiration date (if applicable). If available, include the credential ID and a URL for verification. 

e) Confirm the addition of your certification to your LinkedIn profile by clicking “Save”. 

Become a certified expert in cyber security - join our CISSP Training today and pave the way for a successful career!  

Approaches for Candidates with Limited or no Experience 

Your Cloud Security Engineer Resume can still align with job requirements despite limited experience. Consider emphasising the following: 

a) Leveraging Educational Background: Emphasise the skills honed through your education that align seamlessly with the job’s requirements. 

b) Internships and Temporary Positions: Highlight any roles that have honed your expertise relevant to the position you’re applying for. 

c) Skills Showcase: Present a comprehensive list of skills, covering both the essential and the specialised competencies sought in the job description. 

d) Highlighting Your Unique Contributions: Shine a light on your unique strengths and accomplishments, showcasing the value you can add to the organisation, even with limited industry experience. 

Conclusion 

Begin your journey to becoming a maestro with a Cloud Security Engineer Resume that showcases your expertise and passion. Let your skills illuminate the path to securing the digital skies. Take the first step towards a future where your career soars among the clouds.  

Don't leave your organisation's security to chance - join our Information Systems Security Management Training and become an expert!  

Frequently Asked Questions

The appropriate length for a Cloud Security Engineer Resume is typically 1-2 pages. It should focus on your relevant experience, skills, and qualifications. 

Essential keywords to highlight in a Cloud Security Engineer Resume include cloud security protocols, risk management, compliance standards (e.g., GDPR, ISO 27001), and encryption techniques. It must include your proficiency with security tools like AWS Security Hub or Azure Security Center. 

The Knowledge Academy takes global learning to new heights, offering over 30,000 online courses across 490+ locations in 220 countries. This expansive reach ensures accessibility and convenience for learners worldwide. 

Alongside our diverse Online Course Catalogue, encompassing 17 major categories, we go the extra mile by providing a plethora of free educational Online Resources like News updates, Blogs , videos, webinars, and interview questions. Tailoring learning experiences further, professionals can maximise value with customisable Course Bundles of TKA .

The Knowledge Academy’s Knowledge Pass , a prepaid voucher, adds another layer of flexibility, allowing course bookings over a 12-month period. Join us on a journey where education knows no bounds. 

The Knowledge Academy offers various CCSP Trainings , including the CCSP Certified Cloud Security Professional Course and more. These courses cater to different skill levels, providing comprehensive insights into What is CCSP?    

Our IT Security & Data Protection Blogs cover a range of topics related to Cloud Security, offering valuable resources, best practices, and industry insights. Whether you are a beginner or looking to advance your IT Security & Data Protection skills, The Knowledge Academy's diverse courses and informative blogs have got you covered. 

Upcoming IT Security & Data Protection Resources Batches & Dates

Sat 27th Jul 2024, Sun 28th Jul 2024

Tue 27th Aug 2024

Sat 26th Oct 2024, Sun 27th Oct 2024

Mon 25th Nov 2024

Mon 20th Jan 2025

Mon 24th Mar 2025

Mon 23rd Jun 2025

Mon 29th Sep 2025

Get A Quote

WHO WILL BE FUNDING THE COURSE?

My employer

By submitting your details you agree to be contacted in order to respond to your enquiry

• Business Analysis
• Lean Six Sigma Certification

Share this course

Our biggest spring sale.

We cannot process your enquiry without contacting you, please tick to confirm your consent to us for contacting you about your enquiry.

By submitting your details you agree to be contacted in order to respond to your enquiry.

We may not have the course you’re looking for. If you enquire or give us a call on 01344203999 and speak to our training experts, we may still be able to help with your training requirements.

Or select from our popular topics

• ITIL® Certification
• Scrum Certification
• Change Management Certification
• Business Analysis Courses
• Microsoft Azure Certification
• Microsoft Excel Courses
• Microsoft Project
• Explore more courses

Press esc to close

Fill out your  contact details  below and our training experts will be in touch.

Fill out your   contact details   below

Thank you for your enquiry!

One of our training experts will be in touch shortly to go over your training requirements.

Back to Course Information

Fill out your contact details below so we can get in touch with you regarding your training requirements.

* WHO WILL BE FUNDING THE COURSE?

Preferred Contact Method

No preference

Back to course information

Fill out your  training details  below

Fill out your training details below so we have a better idea of what your training requirements are.

HOW MANY DELEGATES NEED TRAINING?

HOW DO YOU WANT THE COURSE DELIVERED?

Online Instructor-led

Online Self-paced

WHEN WOULD YOU LIKE TO TAKE THIS COURSE?

Next 2 - 4 months

WHAT IS YOUR REASON FOR ENQUIRING?

Looking for some information

Looking for a discount

I want to book but have questions

One of our training experts will be in touch shortly to go overy your training requirements.

Your privacy & cookies!

Like many websites we use cookies. We care about your data and experience, so to give you the best possible experience using our site, we store a very limited amount of your data. Continuing to use this site or clicking “Accept & close” means that you agree to our use of cookies. Learn more about our privacy policy and cookie policy cookie policy .

We use cookies that are essential for our site to work. Please visit our cookie policy for more information. To accept all cookies click 'Accept & close'.

Top 16 Design Engineer Resume Objective Examples

Updated July 15, 2023 13 min read

A resume objective is a brief statement that highlights the skills, experience, and qualifications you bring to the position of design engineer. It should be tailored specifically to the job you are applying for, so that employers can quickly determine whether your skills and qualifications match their needs. When writing a resume objective for a design engineer position, make sure to include any relevant technical knowledge or software skills you possess. For example, if you have experience in CAD/CAM software, mention this in your resume objective. Additionally, emphasize any previous accomplishments related to designing and engineering products or systems. Finally, state what you hope to achieve by working as a design engineer; this could be developing innovative solutions or contributing to the success of the organization. By following these tips and including specific examples of your skills and experiences, you can craft an effective resume objective that will set you apart from other applicants and help land an interview.

or download as PDF

Top 16 Design Engineer Resume Objective Samples

• To obtain a Design Engineer position with a reputable company where I can utilize my knowledge and experience in engineering design.
• To secure a challenging Design Engineer role with an innovative organization that will allow me to apply my technical expertise and creativity.
• Seeking a Design Engineer position at a progressive company where I can leverage my skills in CAD, 3D modeling, and product development.
• To contribute to the success of an organization as a Design Engineer by using my strong background in engineering principles and design methodologies.
• Looking for an opportunity to work as a Design Engineer utilizing my expertise in CAD/CAE software tools and mechanical engineering principles.
• To obtain a position as a Design Engineer where I can use my knowledge of product design, manufacturing processes, and problem-solving skills.
• Seeking employment as a Design Engineer with an organization that values innovation, collaboration, and creative problem-solving.
• Aiming to join an ambitious team as a Design Engineer to develop new products and technologies while utilizing my strong engineering background.
• Desire to work as a Design Engineer for an established firm that will benefit from my technical abilities and creative ideas.
• Seeking employment as a Design Engineer with an innovative company that encourages creativity, collaboration, and teamwork among its employees.
• Looking for the opportunity to be part of an esteemed organization as a Design Engineer where I can apply my skills in product development and design optimization.
• To join an organization as a Design Engineer where I can use my knowledge of CAD/CAM software tools and mechanical engineering principles for product development projects.
• Searching for the role of Design Engineer in which I can combine my ability to solve complex problems with excellent communication skills.
• Looking for the opportunity to join an innovative team as a Design Engineer where I can use my technical expertise in designing new products or improving existing ones.
• Aiming for the position of Design Engineer at your company where I can utilize my experience in 3D modeling software tools for product development projects.
• Applying for the role of Design engineer so that I may utilize my extensive experience in developing efficient designs while staying up-to-date on industry trends

How to Write a Design Engineer Resume Objective

Design engineer resume objectives should be crafted to showcase a candidate's engineering knowledge, technical skills, and ability to work as part of a team. In addition, the objective should demonstrate an understanding of the company's industry and goals. It is important to clearly articulate why you are the best candidate for the position and how your experience will benefit the organization.

When writing a design engineer resume objective, start by introducing yourself and your professional qualifications. Include any certifications or specializations that are applicable to the job you’re applying for, such as “Certified Professional Engineer” or “Master of Science in Mechanical Engineering.” This will help employers quickly identify your qualifications and make it easier for them to match you with the right job opportunity.

Next, highlight your engineering experience and technical skills that are relevant to the position you’re applying for. Do not forget to include any accomplishments or awards that demonstrate excellence in your field. These successes can help establish credibility when employers are considering multiple candidates for a position.

Finally, emphasize your ability to work as part of a team. Design engineers often need to collaborate with other professionals in order to complete projects on time and within budget parameters. Showcase examples of successful teamwork experiences from past jobs or volunteer opportunities where you worked together with others towards a common goal.

By following these guidelines, you will be able to craft an effective design engineer resume objective that will help employers recognize your qualifications and skillset quickly and easily – making it easier for them to decide if you are the best fit for their team!

Related : What does a Design Engineer do?

Key Skills to Highlight in Your Design Engineer Resume Objective

In the competitive field of design engineering, having a well-crafted resume is crucial. One key aspect to focus on is your resume objective, where you can succinctly showcase your skills and qualifications. This section needs to be tailored to the job you're applying for, highlighting the specific skills that make you an ideal candidate. The following are some essential skills that you should consider emphasizing in your Design Engineer Resume Objective, which could significantly increase your chances of landing the job.

AutoCAD is a crucial skill for a Design Engineer as it is one of the most widely used software programs in engineering design. It allows engineers to create precise 2D and 3D models, perform simulations and analyses, and make modifications efficiently. Including AutoCAD in a resume objective shows potential employers that the candidate has the technical skills necessary to perform key tasks related to the job role. This can give them an edge over other candidates who may not be as proficient in this essential tool.

2. SolidWorks

A Design Engineer often needs to create, analyze and optimize design solutions. SolidWorks is a powerful 3D CAD software that helps in these tasks by allowing engineers to visualize and simulate their designs before production. Including this skill in a resume objective shows potential employers that the candidate is capable of effectively using this tool to deliver high-quality design solutions, thereby improving efficiency and productivity.

CATIA (Computer Aided Three-dimensional Interactive Application) is a multi-platform software suite for computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE). As a Design Engineer, having proficiency in CATIA is crucial as it allows the engineer to create 3D parts from 2D sketches, design mechanical assemblies, analyze and simulate product behavior. This skill demonstrates the engineer's capability in designing and developing complex models, which is essential in various industries such as automotive or aerospace. Therefore, including CATIA as a skill in a resume objective can highlight the candidate's technical competency and ability to perform key job responsibilities effectively.

4. Pro/ENGINEER

Pro/ENGINEER is a 3D CAD, CAM, and CAE software that allows the design engineer to create, analyze, and modify complex designs. This skill is needed for a resume objective because it demonstrates the candidate's ability to use industry-standard tools. It also shows their proficiency in creating detailed and accurate models, which can greatly improve efficiency and productivity in the design process. Furthermore, knowledge of Pro/ENGINEER may be required by many employers in the field of engineering design.

ANSYS is a comprehensive software suite that can simulate a wide range of physical phenomena, which is crucial in the field of design engineering. This skill is needed for a resume objective as it indicates the candidate's ability to utilize advanced tools for product design and optimization, structural analysis, fluid dynamics, and thermal analysis. Proficiency in ANSYS demonstrates an engineer's technical competence, problem-solving capabilities, and their ability to create efficient and effective design solutions.

A Design Engineer often needs to create, analyze and optimize complex systems and processes. MATLAB is a programming environment used extensively for these purposes in engineering. It allows engineers to perform numerical analysis, develop algorithms, visualize data, and build models and applications. Having MATLAB listed as a skill on a resume shows potential employers that the candidate has the technical ability to handle complex computations and simulations which are crucial in design engineering roles. This can make the candidate more attractive to employers and increase their chances of achieving their career objectives.

7. SketchUp

A Design Engineer may need SketchUp skills for a resume objective because this software is commonly used in the field for creating, viewing, and modifying 3D designs. Knowledge of SketchUp demonstrates the engineer's ability to visualize, plan, and execute design projects effectively. It also shows proficiency in using industry-standard tools, which can contribute to increasing productivity and efficiency in design tasks.

Revit is a Building Information Modeling (BIM) software that allows design engineers to create detailed 3D models of structures, systems, and components. This skill is crucial for a resume objective because it demonstrates the candidate's ability to effectively visualize and plan complex engineering projects. Mastery of Revit also shows proficiency in modern design technology, which can streamline the design process, improve collaboration with other team members, and increase overall project efficiency.

Rhino3D is a powerful 3D computer graphics and computer-aided design (CAD) application. As a Design Engineer, proficiency in Rhino3D is crucial because it allows for the creation, analysis, editing, and rendering of complex designs and models. This skill showcases the ability to effectively use advanced tools for product development, architectural modeling, industrial design, and manufacturing planning. Including this skill in a resume objective demonstrates technical competence and the ability to handle intricate design tasks efficiently.

10. Fusion 360

Fusion 360 is a crucial skill for a Design Engineer because it is a comprehensive multi-platform tool used for product development. It combines industrial and mechanical design, simulation, collaboration, and machining in one package. Proficiency in Fusion 360 demonstrates the ability to create and test functional models, collaborate with other team members on designs, and streamline the manufacturing process. This skill is essential in achieving efficiency and accuracy in design engineering tasks.

In conclusion, your Design Engineer resume objective should effectively showcase a combination of technical expertise, creativity, and problem-solving abilities. Highlighting key skills in your resume not only helps to set you apart from other candidates but also gives potential employers a clear understanding of your capabilities and potential contributions. Remember, the goal is to create an impactful first impression that will make the hiring manager want to learn more about you. Tailor your skills according to the job description and align them with the needs of the company for maximum impact.

Related : Design Engineer Skills: Definition and Examples

Common Mistakes When Writing a Design Engineer Resume Objective

When writing a design engineer resume objective, it is important to remember that this section should be concise and specific. A well-crafted objective can help your resume stand out from the competition and increase your chances of landing an interview. However, common mistakes can make your objective less effective and even hurt your job prospects. Here are some common mistakes to avoid when writing a design engineer resume objective:

1. Not Customizing Your Objective: One mistake that many job seekers make is not customizing their resume objective for each position they apply for. Instead, they write one generic version and use it for every application. This is a big mistake as employers are looking for candidates who have taken the time to tailor their resumes to their specific needs. Make sure you customize your objective by incorporating keywords from the job description, such as “design engineering” or “CAD/CAM software experience”.

2. Being Too Vague: Another mistake is writing an overly general or vague objective statement that fails to demonstrate how you will be able to contribute to the company’s success in any meaningful way. Instead, focus on specifics such as years of experience in the field, relevant skills and knowledge you possess, or certifications you hold that will help you succeed in the role.

3. Including Unrelated Information: When writing your design engineer resume objective, it is also important not to include unrelated information about yourself or unrelated professional experiences. Stick with relevant details only so that employers can easily see how you are qualified for the position at hand.

4. Not Proofreading: Finally, make sure you proofread your objective several times before submitting it with your application materials; even small typos or errors can detract from an otherwise strong statement of qualifications and objectives.

By avoiding these common mistakes when writing a design engineer resume objective, you can create a compelling statement of qualifications that effectively demonstrates why you are perfect for the job at hand!

Related : Design Engineer Resume Examples

A right resume objective for a design engineer would focus on showcasing the candidate's technical skills and experience, while a wrong resume objective would be too generic and lack specific details about the candidate's qualifications.

Editorial staff

Brenna Goyette

Brenna is a certified professional resume writer, career expert, and the content manager of the ResumeCat team. She has a background in corporate recruiting and human resources and has been writing resumes for over 10 years. Brenna has experience in recruiting for tech, finance, and marketing roles and has a passion for helping people find their dream jobs. She creates expert resources to help job seekers write the best resumes and cover letters, land the job, and succeed in the workplace.

Similar articles

• Top 16 Fpga Design Engineer Resume Objective Examples
• Top 16 Analog Design Engineer Resume Objective Examples
• Top 16 Circuit Design Engineer Resume Objective Examples
• Top 16 Hardware Design Engineer Resume Objective Examples
• Top 16 IC Design Engineer Resume Objective Examples
• Top 16 VLSI Design Engineer Resume Objective Examples

• Coupon Not Working?

• _Development
• _Finance & Accounting
• _IT & Software
• _Office Productivity
• _Terms of Use
• _DMCA Policy
• _Privacy Policy

Build & write Best Resume / CV & Application Covering Letter [Free Online Course] - TechCracked

Help for CV / Resume building and writing for job search using LinkedIn Profile ; Formats for Resume and Letter writing

This course includes :

• 2 hours on-demand video
• Assignments
• 13 articles
• 16 downloadable resources
• Access on mobile and TV
• Full lifetime access
• Certificate of completion

What you'll learn

• Understand how preparing a Great CV sets you apart from the rest of the applicants
• Learn to analyze a recruiter's needs and craft your resume to match those needs.
• Understand from a Recruiter's Point of View why most CVs get rejected.
• Build a Killer Resume and increase your chances of getting shortlisted in your dream company.
• Rectify the mistakes in your resume by following the Mantra for drafting Great Resumes from real-life CV reviews
• Strategies to get your CV through ATS
• Draft your own CV and get it reviewed by the Instructor himself.
• Have access to Job Descriptions of various Diverse Job Fields of 50+ companies and increase the likelihood of your selection
• CV Building Websites
• Links to Related Resources that can help you get the dream job
• Sample Resume CV
• Resume CV Template in Word
• Application Covering Letter Template in Word

Description

Are you facing challenges in getting a job because of your CV (Resume) not getting shortlisted for the job interviews? Do you not only want to learn a new way to write a more Targeted Effective Resume but also get help in writing one for yourself?

Look at this Udemy course where you will

• Learn a new way to write Great Professional CV(Resume) for every job you want to get shortlisted by creating a Master CV (Resume) which you can quickly modify to make it a more Targeted Effective Resume
• Unlike other courses, you can take my help, with no extra charge, in creating such a Resume with right format and content for your self by submitting one assignment each on creating Master CV and Modifying it for one role of your choice!
• See the right resume format with a lot of resume tips and resume writing techniques
• Many additional resources for your career development and career advancement
• Gain Practical Experience by doing the real life assignments

Preview many of  lectures for FREE

When I was working with IIM Udaipur as a Career Advisor many students approached me for their CV not getting short listed. As I started digging deeper with them for the reasons, I started discovering what would make it happen. Things like right and appealing format, CV customized to meet the JD requirements started surfacing as the critical thing needed to get the CV shortlisted. But biggest realization was the preparing a Great CV takes a lot of good feedback on what will make it great. It is like playing cricket; you need to work on it, keep taking feedback till you get it right! And that is the focus of this course- to not only tell how to prepare a great CV but help you do it!

You may like these posts

Advertisement, featured post.

Complete Review of Zero To Mastery : Is Andrei Neagoie ZTM Academy worth it? - TechCracked

About techcracked.

TechCracked is a platform that provides 100% Off Coupons for Udemy Courses. We also cover FREE online courses from more platforms like edX, Coursera, Udacity, and more.

Popular Posts

AWS Certified Cloud Practitioner [Free Online Course] - TechCracked

Microsoft Excel - The Complete Excel Data Analysis Course [Free Online Course] - TechCracked

Complete Ethical Hacking Masterclass: Go from Zero to Hero [Free Online Course] - TechCracked

Python programming with MySQL database: for Data Science [Free Online Course] - TechCracked

[FREE] Oracle Generative AI Professional Certification and Course - TechCracked

Menu footer widget.

Unsupported browser

This site was designed for modern browsers and tested with Internet Explorer version 10 and later.

It may not look or work correctly on your browser.

• Resume & CV

20+ Free Nursing Resume Templates (Examples to Download for 2024)

A successful job search strategy helps you find and land your dream nursing job. You'll need to create a resume and cover letter that gets you interviews. Let's look at some nursing resume examples that you can download and use.

Clean Nurse Resume Pro (premium nursing template) from Envato Elements

Work smart by using a pre-built resume template. You have options between free and premium templates to pick from. Browse through all available options and download one that fits your needs. 

We'll start by checking out 2024's collection of top sample nursing resume templates from Envato Elements. Then we'll explore 20 free nursing resume templates found online. 

Find the Best Nursing Resume Templates on Envato Elements for 2024 (Unlimited Use)

Thanks to Envato Elements, lack of time or skill is no longer an obstacle for many. Active membership is an investment that enables you to improve your creative projects effortlessly. Download a premium nursing template and other files without limits.

Unlock access to millions of creative assets on Envato Elements—all for a low fixed monthly fee. 

Use any premium resume templates from Envato Elements for your job application

Get access to premium files like:

• print, graphics, web, and presentation templates,
• video, music, audio, and photo files,
• 3D objects, fonts, codes, and so much more.

Premium resume templates are modern, creative, well-layered, and most importantly, impressive. Customization is minimal, and in most cases, all you have to do is add your content. Free nursing resume templates fall short and make it risky to use. 

5 Best Premium Nursing Resume Templates for 2024 

Here are five best nursing resume examples from Envato Elements: 

1. Registered Nurses CV Resume Template

This file comes with a single-page resume and cover letter template. It's professionally designed and is a modern minimalistic document. Easily edit the content, add your photo, and you're all set to send out your application. 

2. Nurse Resume & Cover Letter Template

This professional document is well-layered and clearly labeled. This premium template is convenient to work with and provides the best possible results. Download and edit this template in Adobe Illustrator today.

3. Nursing CV Template

Here's a black and white template. The sections on the resume are divided creatively and have a modern feel. The design is simple yet uses typographic hierarchy to direct readers to relevant information. 

4. CV Resume Word Template

The CV Resume Word Template can be used for any job that you want to apply to. It comes with a matching cover letter that looks professional. In addition, this nurse resume download can be edited in Microsoft Word and Adobe Illustrator. The design is modern and minimal, which makes it versatile.

5. Minimalist Resume

This minimal nurse resume download comes with Adobe Photoshop and Microsoft Word versions. It features an achievements and skills section where you can show your accomplishments. Plus, there's a QR code in the contact section to link to a website or social media.

20 Top Free Nursing Resume CV Template Examples to Download (2024)

Before we explore the 20 best free nursing resume templates found on the internet, let's look at Envato's free offerings. Download and use any of these premium files for free. It's an opportunity for you to experience premium before signing up.

Envato Elements offers free monthly files . 

The file you want to try isn't in this month's collection? As these selections are refreshed monthly, you may be in luck next month. 

Here's the offer:

• Twelve unique monthly files from Envato Elements are on offer: audio, graphics, video, web, etc. To get your hands on these monthly premium freebies, all you have to do is create a free account. 

Let's move on and check out 20 top free sample nursing resume templates found online. These files are available for anyone to use. 

1. Free Nurse Resume Template

This is an MS Word sample nursing resume template. The layout is simple and is in black and white. 

2. Free Dental Assistant Resume Template

This template was designed for a clerical position at a clinic or hospital. A nurse can easily customize this template to apply for registered nurse positions. 

3. Free Nursing Resume Example

This nurse resume template free download includes all important sections a nurse's resume should. But the layout is simple and may not grab attention.

4. Free RN Resume Template

This resume is simple and easy to use. It comes in PDF but can be edited in MS Word.

5. New Grad Nursing Resume Template

This template is designed for a newly graduated nurse with a few years of clinical experience done during studies. It comes in black and white. 

6. Nursing Resume Objective Template

There is a clear division between each section in this template. But the design does look a bit dated and not creative. 

7. Free RN Resume Template for Microsoft Word

This resume template includes career objectives, skills and achievements, education and qualifications, project work, computer skills, work experience, other achievements, interests, and references. 

8. Free Registered Nurse Resume Template

This single-page MS Word resume template is free for anyone to use. It's a simple text-only layout.

9. Amy - Free Sample Nursing Resume Template

This resume is divided into four sections: career objective, experience, education, and licenses. Work within the provided sections to keep the resume as a single-page document. 

10. Free Nursing Resume Example

This resume example is very wordy. This document serves well as a content example for a nursing resume. 

11. Gray - Free RN Resume Template

This free RN resume template has a dark gray header and footer section. The body of the page is also split into two sections. This color sectioning is neat and a step up from other free sample nursing resume templates.

12. Red - Free Nursing Resume Example

The text on this template is black, but critical information like contact details are in red. You can highlight other texts by turning them red too. 

13. Blue - Free Nursing Resume Template

In this template, sections are divided by blue lines. Section headers are in blue too. 

14. Free RN Resume Template - Google Docs

This is a free resume and cover letter set template for any registered nurse to use. You can edit or customize these templates of Google Docs.

15. Free Medical CV Template

Here's a Google Docs template you can use to apply for any medical-related jobs. Highlights are in blue. 

16. Amazing - Free Medical Resume Template

This is a two-paged resume Google Docs template. Texts are in light blue, and highlights are in red.

17. Free Nurse Resume Modern Template

Here's a two-paged, black and white resume template. Sections are divided by lines. 

18. Free Nurse Resume Traditional

This template comes in PDF but can be edited on MS Word. It's a traditional format that can come off looking dated. 

19. RN - Free Nursing Resume Template

This is a single-page registered nurse resume template for free. Easily edit this template on MS Word or Google Docs. 

20. Free Registered Nurse Resume Template

Here's a four-page resume template that thoroughly covers all sections with a few examples. Bold texts are used to highlight titles and essential information. 

How to Customize a Nurse Resume in Microsoft Word

After you’ve chosen a free resume template for nurses or a premium template, you’ll want to customize it.

In this tutorial, the Resume Word from Envato Elements is used. Because this template has a simple design, you can use it for any job you apply to.

Let's get started:

1. Add Your Information

When you open your nurse resume download template, you’ll notice that it's already filled out. This is to show you where information is supposed to go.

To replace the text that comes with your template, first highlight the text you want to replace. Next, press the Delete button on your keyboard.

2. Customize the Font

If you don’t like the font on your template, you can change it easily.

• Highlight the text that you want to change the font of.
• Click on the Home tab above the toolbar. You’ll see a font field with the current font in the home tab.
• Click on the arrow in this field. When you click on this arrow, a menu drops down. From this menu, choose the font that you want to use.

To change the font size, there's a Font Size field next to the Font menu field. Click on the arrow in the field to access the font size menu. Then, choose the right font for you from the menu.

3. Customize the Colors

Some companies require a plain resume, while others want you to show your creativity or personality. If you want to show your personality in a fun way without going over the top, then adding color by changing the background is the easiest way.

• Click on the white space in your resume.
• Click on the Design tab.
• You'll see a Page Color button in the toolbar under the design tab. Click the arrow next to that button.
• When you click on this button, a color menu appears. Choose the color of your choice.

4. Add an Image

Some resumes require a headshot. If you’re applying to a job that does require one, you need to know how to add the image to your resume.

After choosing your image and knowing where the file is located, click on the Insert tab.

Next, click on the Pictures button in the toolbar. When you click on this button, a menu appears. Choose the right option depending on where your image file is located. Adjust the image as needed.

5. Save as a PDF

Some companies would prefer if you sent them a PDF version of your resume. This is also good information if you need to email your resume.

• To save your resume as a PDF, click on the File option on the toolbar at the top of your screen. When you click on this option, a menu appears.
• Choose the Save As… option. When you click Save As , a window appears. In that window, there's a File Format: field. Click on the arrow in that field.
• When you click on the arrow, a menu drops down. Click the PDF option.
• Once the option is selected, click on the blue Save button at the bottom of the window.

5 Quick Tips To Make Great Nursing Resumes in 2024

Do you need to create an impressive nursing resume, and are you unsure how to go about it? Here are five quick tips for setting you on the right path for this job application: 

1. Add Better Keywords and Phrases

Increase the chances of getting called for an interview by adding relevant keywords and phrases to your CV. Recruiters use Applicant Tracking System (ATS) software or manually screen applications to assess applicants' compatibility to the position. Learn more about the importance of keywords for resumes with this guide:

2. Highlights and Section Dividers

There are many ways to highlight and show clear division of sections. But some approaches like lines and bold fonts can look dated. While dividing by background colors can look clean and modern.

Medical-Themed Resume (premium template) from Envato Elements, uses colors to creatively divide sections

Keep this in mind while selecting your template and be sure to go with a template that creatively separates sections. A well-designed resume grabs attention, is easy to read, and directs your eyes to vital information. 

3. Provide References Upon Request

Licenses and Certification is included instead of References on the premium Medical CV Resume & Cover Letter (Envato Elements)

Leave out the references from your resume. You've got limited space to work with, and you can provide the references upon request. The goal, for now, is to include as much information (with keywords) to get an interview. 

4. Go Visual With Infographics

Medical Resume (premium example) uses simple graphics and icons to visualize some texts

Visuals grab attention more than texts. Turn timelines, skills, or software knowledge into graphics. Icons are also a great way to add more color to your resume.  

5. Stand Out With a Personal Brand Statement

Consider adding a personal brand statement to your CV. It summarizes your current position in your career and what you can bring to the company. Check out this article to find out how you can write a great personal brand statement:

5 Resume Design Trends

It'll help your job search if your resume looks current. Here are some top resume design trends to incorporate into your resume:

1. List Your Skills

Skills are an essential section that shows your potential employer what you have that they need at a glance. There are two different skills that you can add to your resume. They are:

• Hard skills . These are gained through education or work experiences.
• Soft skills . These are skills that relate to how you work and interact with others. (For example, communication, teamwork, and Problem-solving.)

Listing your skills is a great way to show your potential employer what makes you stand out among the other applicants.

2. Choose the Right Format

There are several different types of resume formats. Not every format is best for the job that you’re applying to. Here are the three top resume formats:

• Reverse Chronological Format . This format is the most common among traditional career paths. The format lists your work history in reverse chronological order, with your current job first and ending with your first job.
• Functional Format . This is a great choice for someone applying to a niche career, looking to change careers, or without work experience. In this format, you list skills and experience relevant to the job you’re applying to rather than your work history.
• Combination Format . This format will work well for you if you have a diverse work history. This format combines reverse chronological and functional formats.

When choosing which format works for you, consider the job you're applying for and your career field.

3. Include Your Social Media

Your online presence can help your job hunt. Most employers would prefer if you at least have a LinkedIn profile that you can link to on your resume. LinkedIn is a great tool where you can expand your resume. It’s created specifically for job hunters. If you have a creative job, you should link to your website with your portfolio. Before applying for a job, make sure to check all of your social media. Make sure it doesn’t have anything you don’t want potential employers to see.

4. List Your Accomplishments

Instead of just listing job titles, it's more impressive to list your accomplishments. Did you win an award in your career? Add it to the resume.

Did you finish a high number of projects? Add it to your resume. This shows your future employer that you don’t just know how to do your job but that you’re good at your job. Adding your accomplishments can impress the hiring manager and lead to a higher chance of being hired.

Subtle pops of color can make your resume stand out among boring black-and-white resumes. Before adding a pop of color, consider the job you’re applying for. For example, a resume with a hot pink background can look unprofessional if you are applying to be a lawyer. Instead, some resumes have colorful objects that highlight essential information on your resume. This is a great way to add color because you highlight important information without distracting the reader.

Discover More Top Resume Template Designs

Are you interested in exploring some top multipurpose resume templates? Here are three top collections for you to start with. 

Learn More About Making Great Resumes in 2024

Put your best foot forward with the help of an impressive registered nurse resume. Are you new at creating resumes and could use some guidance?

Pin this Ultimate Guide to Building a Resume to your browser. It serves as a quick reference with loads of tips to help you land that dream job. 

Here are three sample how-to tutorials: 

Download a Premium Top Registered Nurse Resume Template Today!

A job application process can feel daunting at times. And not getting called for an interview you wanted is highly frustrating too. Increase your chances of getting interviews by submitting a well-prepared resume that best represents you. 

Envato Elements' premium nursing resume templates get you on the right path to creating an impressive resume that'll stand out from the competition. With an active Envato Elements subscription, you'll take all your other creative projects to new heights too. It's time to work smart! 

Get the best nurse resume templates from Envato Elements! Subscribe to download now!

Editorial Note: This post has been updated with contributions from Sarah Joy . Sarah is a freelance instructor for Envato Tuts+.