8d problem solving steps

Eight Disciplines of Problem Solving (8D)

– Eight Disciplines of Problem Solving –

⇓   Introduction to 8D

⇓   What is 8D

⇓   Why Apply 8D

⇓   When to Apply 8D

⇓   How to Apply 8D

Introduction to Eight Disciplines of Problem Solving (8D)

The Eight Disciplines of Problem Solving (8D) is a problem solving methodology designed to find the root cause of a problem, devise a short-term fix and implement a long-term solution to prevent recurring problems. When it’s clear that your product is defective or isn’t satisfying your customers, an 8D is an excellent first step to improving Quality and Reliability.

Ford Motor Company developed this problem solving methodology, then known as Team Oriented Problem Solving (TOPS), in the 1980s. The early usage of 8D proved so effective that it was adopted by Ford as the primary method of documenting problem solving efforts, and the company continues to use 8D today.

8D has become very popular among manufacturers because it is effective and reasonably easy to teach. Below you’ll find the benefits of an 8D, when it is appropriate to perform and how it is performed.

What is Eight Disciplines of Problem Solving (8D)

The 8D problem solving process is a detailed, team oriented approach to solving critical problems in the production process. The goals of this method are to find the root cause of a problem, develop containment actions to protect customers and take corrective action to prevent similar problems in the future.

The strength of the 8D process lies in its structure, discipline and methodology. 8D uses a composite methodology, utilizing best practices from various existing approaches. It is a problem solving method that drives systemic change, improving an entire process in order to avoid not only the problem at hand but also other issues that may stem from a systemic failure.

8D has grown to be one of the most popular problem solving methodologies used for Manufacturing, Assembly and Services around the globe. Read on to learn about the reasons why the Eight Disciplines of Problem Solving may be a good fit for your company.

Why Apply Eight Disciplines of Problem Solving (8D)

The 8D methodology is so popular in part because it offers your engineering team a consistent, easy-to-learn and thorough approach to solving whatever problems might arise at various stages in your production process. When properly applied, you can expect the following benefits:

• Improved team oriented problem solving skills rather than reliance on the individual
• Increased familiarity with a structure for problem solving
• Creation and expansion of a database of past failures and lessons learned to prevent problems in the future
• Better understanding of how to use basic statistical tools required for problem solving
• Improved effectiveness and efficiency at problem solving
• A practical understanding of Root Cause Analysis (RCA)
• Problem solving effort may be adopted into the processes and methods of the organization
• Improved skills for implementing corrective action
• Better ability to identify necessary systemic changes and subsequent inputs for change
• More candid and open communication in problem solving discussion, increasing effectiveness
• An improvement in management’s understanding of problems and problem resolution

8D was created to represent the best practices in problem solving. When performed correctly, this methodology not only improves the Quality and Reliability of your products but also prepares your engineering team for future problems.

When to Apply Eight Disciplines of Problem Solving (8D)

The 8D problem solving process is typically required when:

• Safety or Regulatory issues has been discovered
• Customer complaints are received
• Warranty Concerns have indicated greater-than-expected failure rates
• Internal rejects, waste, scrap, poor performance or test failures are present at unacceptable levels

How to Apply Eight Disciplines of Problem Solving (8D)

The 8D process alternates inductive and deductive problem solving tools to relentlessly move forward toward a solution. The Quality-One approach uses a core team of three individuals for inductive activities with data driven tools and then a larger Subject Matter Expert (SME) group for the deductive activities through brainstorming, data-gathering and experimentation.

D0: Prepare and Plan for the 8D

Proper planning will always translate to a better start. Thus, before 8D analysis begins, it is always a good idea to ask an expert first for their impressions. After receiving feedback, the following criterion should be applied prior to forming a team:

Collect information on the symptoms

Use a Symptoms Checklist to ask the correct questions

Identify the need for an Emergency Response Action (ERA), which protects the customer from further exposure to the undesired symptoms

D1: Form a Team

A Cross Functional Team (CFT) is made up of members from many disciplines. Quality-One takes this principle one step further by having two levels of CFT:

• The Core Team Structure should involve three people on the respective subjects: product, process and data
• Additional Subject Matter Experts are brought in at various times to assist with brainstorming, data collection and analysis

Teams require proper preparation. Setting the ground rules is paramount. Implementation of disciplines like checklists, forms and techniques will ensure steady progress.  8D must always have two key members: a Leader and a Champion / Sponsor:

• The Leader is the person who knows the 8D process and can lead the team through it (although not always the most knowledgeable about the problem being studied)
• The Champion or Sponsor is the one person who can affect change by agreeing with the findings and can provide final approval on such changes

D2: Describe the Problem

The 8D method’s initial focus is to properly describe the problem utilizing the known data and placing it into specific categories for future comparisons. The “Is” data supports the facts whereas the “Is Not” data does not. As the “Is Not” data is collected, many possible reasons for failure are able to be eliminated. This approach utilizes the following tools:

• Problem Statement
• Affinity Diagram (Deductive tool)
• Fishbone/Ishikawa Diagram (Deductive tool)
• Problem Description

D3: Interim Containment Action

In the interim, before the permanent corrective action has been determined, an action to protect the customer can be taken. The Interim Containment Action (ICA) is temporary and is typically removed after the Permanent Correct Action (PCA) is taken.

• Verification of effectiveness of the ICA is always recommended to prevent any additional customer dissatisfaction calls

D4: Root Cause Analysis (RCA) and Escape Point

The root cause must be identified to take permanent action to eliminate it. The root cause definition requires that it can be turned on or off, at will. Activities in D4 include:

• Comparative Analysis listing differences and changes between “Is” and “Is Not”
• Development of Root Cause Theories based on remaining items
• Verification of the Root Cause through data collection
• Review Process Flow Diagram for location of the root cause
• Determine Escape Point, which is the closest point in the process where the root cause could have been found but was not

D5: Permanent Corrective Action (PCA)

The PCA is directed toward the root cause and removes / changes the conditions of the product or process that was responsible for the problem. Activities in D5 include:

• Establish the Acceptance Criteria which include Mandatory Requirements and Wants
• Perform a Risk Assessment /  Failure Mode and Effects Analysis (FMEA) on the PCA choices
• Based on risk assessment, make a balanced choice for PCA
• Select control-point improvement for the Escape Point
• Verification of Effectiveness for both the PCA and the Escape Point are required

D6: Implement and Validate the Permanent Corrective Action

To successfully implement a permanent change, proper planning is essential. A project plan should encompass: communication, steps to complete, measurement of success and lessons learned. Activities in D6 include:

• Develop Project Plan for Implementation
• Communicate the plan to all stakeholders
• Validation of improvements using measurement

D7: Prevent Recurrence

D7 affords the opportunity to preserve and share the knowledge, preventing problems on similar products, processes, locations or families. Updating documents and procedures / work instructions are expected at this step to improve future use. Activities in D7 include:

• Review Similar Products and Processes for problem prevention
• Develop / Update Procedures and Work Instructions for Systems Prevention
• Capture Standard Work / Practice and reuse
• Assure FMEA updates have been completed
• Assure Control Plans have been updated

D8: Closure and Team Celebration

Teams require feedback to allow for satisfactory closure. Recognizing both team and individual efforts and allowing the team to see the previous and new state solidifies the value of the 8D process. Activities in D8 include:

• Archive the 8D Documents for future reference
• Document Lessons Learned on how to make problem solving better
• Before and After Comparison of issue
• Celebrate Successful Completion

8D and Root Cause Analysis (RCA)

The 8D process has Root Cause Analysis (RCA) imbedded within it. All problem solving techniques include RCA within their structure. The steps and techniques within 8D which correspond to Root Cause Analysis are as follows:

• Problem Symptom is quantified and converted to “Object and Defect”
• Problem Symptom is converted to Problem Statement using Repeated Whys
• Possible and Potential Causes are collected using deductive tools (i.e. Fishbone or Affinity Diagram)
• Problem Statement is converted into Problem Description using Is / Is Not
• Problem Description reduces the number of items on the deductive tool (from step 3)
• Comparative Analysis between the Is and Is Not items (note changes and time)
• Root Cause theories are developed from remaining possible causes on deductive tool and coupled with changes from Is / Is Not
• Compare theories with current data and develop experiments for Root Cause Verification
• Test and confirm the Root Causes

Example: Multiple Why Technique

The Multiple / Repeated Why (Similar to 5 Why) is an inductive tool, which means facts are required to proceed to a more detailed level. The steps required to determine problem statement are:

• Problem Symptom is defined as an Object and Defect i.e. “Passenger Injury”
• Why? In every case “SUV’s Roll Over”
• Why? In every case, it was preceded by a “Blown Tire”
• Why? Many explanations may be applied, therefore the team cannot continue with another repeated why past “Blown Tire”
• Therefore, the Problem Statement is “Blown Tire”
• Why? Low (Air) Pressure, Tire Defect (Degradation of an Interface) and High (Ambient) Temperature
• Counter measures assigned to low pressure and tire defect

This example uses only 4 of the 5 Whys to determine the root causes without going further into the systemic reasons that supported the failure. The Repeated Why is one way to depict this failure chain. Fault Tree Analysis (FTA) could also be used.

Learn More About Eight Disciplines of Problem Solving (8D)

Quality-One offers Quality and Reliability Support for Product and Process Development through Consulting, Training and Project Support. Quality-One provides Knowledge, Guidance and Direction in Quality and Reliability activities, tailored to your unique wants, needs and desires. Let us help you Discover the Value of 8D Consulting , 8D Training or 8D Project Support .

Contact Us | Discover the Value!

(248) 280-4800 | [email protected]

Remember Me

• Don't have an account? Register
• Lost your password? Click here
• Already have an account? Log in

• Product overview
• All features
• App integrations

CAPABILITIES

• project icon Project management
• Project views
• Custom fields
• Status updates
• goal icon Goals and reporting
• Reporting dashboards
• workflow icon Workflows and automation
• portfolio icon Resource management
• Time tracking
• my-task icon Admin and security
• Admin console
• asana-intelligence icon Asana AI
• list icon Personal
• premium icon Starter
• briefcase icon Advanced
• Goal management
• Organizational planning
• Campaign management
• Creative production
• Content calendars
• Marketing strategic planning
• Resource planning
• Project intake
• Product launches
• Employee onboarding
• View all uses arrow-right icon
• Project plans
• Team goals & objectives
• Team continuity
• Meeting agenda
• View all templates arrow-right icon
• Work management resources Discover best practices, watch webinars, get insights
• What's new Learn about the latest and greatest from Asana
• Customer stories See how the world's best organizations drive work innovation with Asana
• Help Center Get lots of tips, tricks, and advice to get the most from Asana
• Asana Academy Sign up for interactive courses and webinars to learn Asana
• Developers Learn more about building apps on the Asana platform
• Community programs Connect with and learn from Asana customers around the world
• Events Find out about upcoming events near you
• Partners Learn more about our partner programs
• Support Need help? Contact the Asana support team
• Asana for nonprofits Get more information on our nonprofit discount program, and apply.

Featured Reads

• Project management |
• What is 8D? A template for efficient pr ...

What is 8D? A template for efficient problem-solving

How you respond when problems arise is one of the most defining qualities of a manager. Luckily, there are tools you can use to master problem-solving. The 8D method of problem-solving combines teamwork and basic statistics to help you reach a logical solution and prevent new issues from arising.

You’ve spent months overseeing the development of your company's newest project. From initiation, planning, and execution, you’re confident this may be your best work yet.

Until the feedback starts rolling in.

There’s no sugar-coating it—things don’t always go as planned. But production or process issues are hardly a signal to throw in the towel. Instead, focus on honing your problem-solving skills to find a solution that keeps it from happening again. 

The 8D method of problem solving emphasizes the importance of teamwork to not only solve your process woes but prevent new ones from occurring. In this guide, we’ll break down what 8D is, how to use this methodology, and the benefits it can give to you and your team. Plus, get an 8D template to make solving your issue easier. 

What is 8D?

The eight disciplines (8D) method is a problem-solving approach that identifies, corrects, and eliminates recurring problems. By determining the root causes of a problem, managers can use this method to establish a permanent corrective action and prevent recurring issues. 

How do you use the 8D method?

The 8D method is a proven strategy for avoiding long-term damage from recurring problems. If you’re noticing issues in your workflow or processes, then it’s a good time to give this problem-solving method a try. 

To complete an 8D analysis, follow “the eight disciplines” to construct a statistical analysis of the problem and determine the best solution.

The eight disciplines of problem-solving

8D stands for the eight disciplines you will use to establish an 8D report. As you may notice, this outline starts with zero, which makes nine total disciplines. The “zero stage” was developed later as an initial planning stage. 

To illustrate these steps, imagine your organization experienced a decline in team innovation and productivity this past year. Your stakeholders have noticed and want to see changes implemented within the next six months. Below, we’ll use the 8D process to uncover a morale-boosting solution.

D0: Prepare and plan

Before starting the problem-solving process, evaluate the problem you want to solve. Understanding the background of the problem will help you identify the root cause in later steps. 

Collect information about how the problem has affected a process or product and what the most severe consequences may be. Planning can include:

Gathering data

Determining the prerequisites for solving the problem

Collecting feedback from others involved

If we look back at our example, you may want to figure out whether this decline in morale is organization-wide or only applies to a few departments. Consider interviewing a few employees from different departments and levels of management to gain some perspective. Next, determine what knowledge and skills you will need to solve this lapse in productivity. 

D1: Form your team

Create a cross-functional team made up of people who have knowledge of the various products and workflows involved. These team members should have the skills needed to solve the problem and put corrective actions in place. 

Steps in this discipline may include:

Appointing a team leader

Developing and implementing team guidelines

Determining team goals and priorities

Assigning individual roles

Arranging team-building activities

From our example, a solid team would consist of people with first-hand experience with the issues—like representatives from all departments and key people close to workshop-level work. You may also want to pull someone in from your HR department to help design and implement a solution. Most importantly, make sure the people you choose want to be involved and contribute to the solution.

D2: Identify the problem

You may have a good understanding of your problem by now, but this phase aims to break it down into clear and quantifiable terms by identifying the five W’s a and two H’s (5W2H):

Who first reported the problem?

What is the problem about?

When did it occur and how often?

Where did it occur (relating to the sector, supplier, machine, or production line involved)?

Why is solving the problem important?

How was the problem first detected?

How many parts/units/customers are affected?

Use your team’s insights to answer these questions. From our example, your team may conclude that: 

Employees feel overwhelmed with their current workload. 

There is no real structure or opportunity to share new ideas.

Managers have had no training for meetings or innovation settings.

Disgruntled employees know they can achieve more—and want to achieve more—even if they seem disengaged.

Once you answer these questions, record an official problem statement to describe the issue. If possible, include photos, videos, and diagrams to ensure all parties have a clear understanding of the problem. It may also help to create a flowchart of the process that includes various steps related to the problem description.

D3: Develop an interim containment plan

Much like we can expect speedy first aid after an accident, your team should take immediate actions to ensure you contain the problem—especially if the problem is related to customer safety. 

An interim containment plan will provide a temporary solution to isolate the problem from customers and clients while your team works to develop a permanent corrective action. This band-aid will help keep your customers informed and safe—and your reputation intact.

Because your findings revealed workers were overworked and managers lacked training, your team suggests scheduling a few mandatory training sessions for leaders of each department covering time and stress management and combating burnout . You may also want to have a presentation outlining the topics of this training to get key managers and stakeholders interested and primed for positive upcoming changes. 

D4: Verify root causes and escape points

Refer back to your findings and consult with your team about how the problem may have occurred. The root cause analysis involves mapping each potential root cause against the problem statement and its related test data. Make sure to test all potential causes—fuzzy brainstorming and sloppy analyses may cause you to overlook vital information. 

In our example, focus on the “why” portion of the 5W2H. You and your team identify six root causes:

Managers have never had any training

There is a lack of trust and psychological safety

Employees don’t understand the objectives and goals

Communication is poor

Time management is poor

Employees lack confidence

In addition to identifying the root causes, try to pinpoint where you first detected the problem in the process, and why it went unnoticed. This is called the escape point, and there may be more than one. 

D5: Choose permanent corrective actions

Work with your team to determine the most likely solution to remove the root cause of the problem and address the issues with the escape points. Quantitatively confirm that the selected permanent corrective action(s) (PCA) will resolve the problem for the customer. 

Steps to choosing a PCA may include:

Determining if you require further expertise

Ensuring the 5W2Hs are defined correctly

Carrying out a decision analysis and risk assessment

Considering alternative measures

Collecting evidence to prove the PCA will be effective

Your team decides to roll out the training used in the interim plan to all employees, with monthly company-wide workshops on improving well-being. You also plan to implement meetings, innovation sessions, and team-coaching training for managers. Lastly, you suggest adopting software to improve communication and collaboration. 

D6: Implement your corrective actions

Once all parties have agreed on a solution, the next step is to create an action plan to remove the root causes and escape points. Once the solution is in effect, you can remove your interim containment actions.

After seeing success with the training in the interim phase, your stakeholders approve all of your team’s proposed PCAs. Your representative from HR also plans to implement periodic employee wellness checks to track employee morale .

To ensure your corrective action was a success, monitor the results, customer, or employee feedback over a long period of time and take note of any negative effects. Setting up “controls” like employee wellness checks will help you validate whether your solution is working or more needs to be done. 

D7: Take preventive measures

One of the main benefits of using the 8D method is the improved ability to identify necessary systematic changes to prevent future issues from occurring. Look for ways to improve your management systems, operating methods, and procedures to not only eliminate your current problem, but stop similar problems from developing later on.

Based on our example, the training your team suggested is now adopted in the new manager onboarding curriculum. Every manager now has a “meeting system” that all meetings must be guided by, and workloads and projects are managed as a team within your new collaboration software . Innovation is improving, and morale is at an all-time high!

D8: Celebrate with your team

The 8D method of problem-solving is impossible to accomplish without dedicated team members and first-class collaboration. Once notes, lessons, research, and test data are documented and saved, congratulate your teammates on a job well done! Make an effort to recognize each individual for their contribution to uncovering a successful solution.

8D report template and example

Check out our 8D report template below to help you record your findings as you navigate through the eight disciplines of problem solving. This is a formal report that can be used as a means of communication within companies, which makes for transparent problem-solving that you can apply to the entire production or process chain.

Benefits of using the 8D method

The 8D method is one of the most popular problem-solving strategies for good reason. Its strength lies in teamwork and fact-based analyses to create a culture of continuous improvement —making it one of the most effective tools for quality managers. The benefits of using the 8D method include: 

Improved team-oriented problem-solving skills rather than relying on an individual to provide a solution

Increased familiarity with a problem-solving structure

A better understanding of how to use basic statistical tools for problem-solving

Open and honest communication in problem-solving discussions

Prevent future problems from occurring by identifying system weaknesses and solutions

Improved effectiveness and efficiency at problem-solving

Better collaboration = better problem solving

No matter how good a manager you are, production and process issues are inevitable. It’s how you solve them that separates the good from the great. The 8D method of problem solving allows you to not only solve the problem at hand but improve team collaboration, improve processes, and prevent future issues from arising. 

Try Asana’s project management tool to break communication barriers and keep your team on track.

Related resources

How Asana uses work management for employee onboarding

6 ways to develop adaptability in the workplace and embrace change

4 ways to establish roles and responsibilities for team success

9 tips for taking better meeting notes

Designorate

Design thinking, innovation, user experience and healthcare design

What is the 8D Problem Solving? And How to use the 8D Report?

The 8D problem-solving process (also known as the 8 Disciplines) is very different from previous processes we explored previously, such as the Double Diamond process or the IBM Design Thinking. The 8D process works in a rigid standardised nature to address the crisis caused by problems. The 8D process aims to walk with the team to highlight the problem, its root causes and propose a long-term solution. The process is documented in an 8D report which includes details of each of the eight stages. At the end of this article, we will explore an example report, and you can find a free 8D report template to download.

In times of crisis, companies face the challenge of analysing and solving problems efficiently in a short time to save developed projects. Problem-solving techniques such as the  TRIZ method  and  Hurson’s Production Thinking Model  allow companies to overcome crises and solve problems using less effort and time.

• Stage Gate Process: The Complete Practice Guide
• The Double Diamond Design Thinking Process and How to Use it
• A Guide to the SCAMPER Technique for Creative Thinking
• Design Thinking Tools: Reverse Brainstorming

Brief History of the 8D Problem Solving

The 8D method was first implemented by the US government during WW II as a military standard and was referred to as the Army Directive 1520, “Remedies and disposal of nonconforming materials.” In 1987, the demand for a team-oriented problem-solving method increased among the management organisation in the automotive industry to find a way to eliminate recurring issues.

Ford Motor Company published their manual,  Team Oriented Problem Solving (TOPS),  which includes their 8 Disciplines of the problem-solving process. The process was initially used to deal with quality control and safety issues inside the company but later expanded its role to a team approach problem-solving method. The 8D process is employed by engineers and designers to identify, analyse, and correct problems by eliminating the primary source that caused the problem.

So, what are the eight steps in the 8D methodology? The 8D problem solving process includes 8 Disciplines. In the mid-90s, a D0 step for planning was added to the process. The 8D steps include the following:

• D1: Team formation
• D2: Describe the problem
• D3: Develop a temporary containment plan
• D4: Determine and verify root causes
• D5: Verify the permanent solution
• D6: Implement the permanent solution
• D7: Prevent recurrence
• D8: Congratulate your team

The 8 Disciplines aim to achieve the following targets while solving the specified problem:

• Think as a team while solving the problem
• Isolate the situation and understand its causes
• Identify the factors that contribute to the problem
• Provide a temporary solution to halt the impact of the problem
• Eliminate the causes of the problem and the factors contributing to it
• Prevent the problem from recurring

When Should the 8D Problem Solving be Used?

Based on the above targets, the 8D problem solving process is designed for complex problems whose solution exceeds the ability of one expert. Also, it aims to establish communication for problem resolution through different levels inside the company. In some situations, the consumer or the management team requests the application of the 8D process through several forms or documentation.

While 8D problem solving is suitable for recurring problems that may repeatedly occur within a project or company, it is not ideal for simple issues that can be solved quickly by individual efforts. The process is unsuitable for a problem that can be solved with a straightforward solution. The 8D process is designed for complex issues, which require several weeks to solve and the involvement of at least four people.

8D problem solving provides a systematic process to find and solve problems. Therefore, if the situation requires choosing between alternative solutions, 8D acknowledges that other tools may help solve the problem better than the 8D process.

How to Apply the 8D Problem Solving Process?

The steps below form the 8 Discipline process to achieve targeted problem solving through the eight steps.

This discipline is also known as the Pre 8D because it aims to understand the problem and determine if the 8D process is the correct method to use. At this stage, the team aims to answer general questions such as:

• Is this a new problem, or has it happened before?
• Is this a recurring problem?
• What is the history of this issue?
• What was the method used to solve the problem before?

At this stage, the target is to learn about the problem’s history and decide if the 8D process is the best tool to solve the problem.

D1: Team Formation

Thinking as a team can produce more efficient solutions than trying to solve a problem alone. The team includes all the stakeholders involved in the situation. The team communicates with each other and performs brainstorming to solve the problem (check  Design Thinking Tools: Reverse Brainstorming ). If the team does not know each other, the brainstorming time can be used to learn how to teach members to explore ideas together. Methods can be used in brainstorming sessions such as mind mapping , Six Thinking Hats , and  Lego Serious Play.

D2: Describe the Problem

After team formation, the second step is to understand the problem and its risks. This stage starts with a risk analysis to identify the situation and how it can affect the project flow. Several methods can be used to analyse the problem from different perspectives, including  SWOT analysis ,  SCAMPER technique , and similar tools. This stage is essential to building a clear vision of the problem and ensuring all stakeholders have the same understanding of the situation.

D3: Develop a Temporary Containment Plan

While solving the problem, there should be a temporary containment plan to prevent the problem from affecting the rest of the project or the final product. This temporary containment solution is a short-term operation such as adding more labour, increasing the quality measurements, applying a risk plan, etc.

It is essential to understand that the containment action is not the real solution and can only be used for the short term. Therefore, this action can be applied internally and not affect the process of reaching a permanent solution.

D4: Determine and Verify Root Causes

This stage aims to investigate the root causes of the problem; it can be considered the core of the 8D problem solving process. In many problems, what we see as causes are symptoms of other root causes. This misunderstanding can lead to inaccurate attempts at solutions that can have negative consequences in the future and leave the underlying problem unsolved.

An intensive investigation should be implemented because, in many cases, the root cause is hidden inside the process and covered by many symptoms, which is confusing. Some tools can be used to define the root causes of the problem, such as  brainstorming , statistical analysis, flow charts, audits, etc.

D5: Verify the Permanent Solution

Once the root cause is defined, the solution becomes apparent, and the team better understands how to solve the problem. However, the symptoms and other related factors may create difficulties deciding how best to apply the solution. So, these other factors should be considered when determining the permanent solution to the dilemma.

When choosing the permanent solution to the problem, it should meet the following criteria to ensure it is the ideal solution for the problem:

• The solution should be practical
• The solution should be feasible
• The solution should be cost-effective
• The solution should not fail during production
• The solution should be implemented in all affected facilities in the company

D6: Implement the Permanent Solution

Once the solution is approved, this step tends to work as an action plan. This plan aims to outline the steps to implement the solution. It is common to ask questions in this stage: What should be done? Who should be involved in the correction plan?

More documentation and detailed plans should be created if the solution is complex and needs further procedures. The method may include training the team and checking the plan’s progress for further development and improvement.

D7: Prevent Recurrence

Once the action plan is set and ready to be implemented, the team should establish a plan to prevent the problem from occurring in the future. The action plan should be tested and documented as part of the process to avoid the recurrence of the problem. Some of the tools that can achieve this goal are Control Charts, Capabilities Analysis, and Control Plans.

D8: Congratulate the Team

After completing the task and implementing the solution, the team deserves an acknowledgement of their work and a celebration. This event will positively impact the stakeholders and reflect recognition of employees’ efforts from the management inside the company.

How do you Write an 8D Report?

The primary documentation used in the problem solving process is the 8D report. Korenko et al. (2013) presented an example of the 8D problem-solving application, Application 8D Method For Problems Solving . After this example, you can find a free 8D Report template that you can download and use for both commercial and noncommercial applications. The first part of the report, D0, includes information about the problem and the project details related to the project. D1 section contains details of the team involved in the project, roles, titles and contact information. D2 part of the report includes a detailed description of the problem and possible visual images to show the problem clearly. The report can consist of the type of damage of the failure and the function where the problem occurs (Figure 2).  

D3 includes details of the temporary solution for the problem required to stop the damage rapidly. In this part, the temporary remedy is described, particularly the symptoms affect, the responsibility, and the validation of the action. In D4, the team uses a root-cause method such as the 5WHYs or the Cause-Effect analysis (Fish Bone method). These methods help the team to identify the root causes of the problem. In Figure 3, the 5WHYs method is used several times to identify the root cause of the problem. 

D5 of the report provides details about the permanent solution to fix the problem. Unlike the temporary solution, this aims to element the root causes of the problem. This section includes the procedure’s name, the reason to use it, the responsibility, the management approval to apply it and the expected date of completing the utilisation of the solution, as seen in Figure 4. In the following stage, D6, the team provides details on the implementation and validation of the permanent action.

D7 provides details about preventing the recurrent problem, such as the name of the action after the validation process in the previous stage. Also, this stage provides details of the cause behind this action and elements about its responsibility and implementing details. Finally, in D8, the report includes a summary of the procedure and the proper approvals related to the procedure implementation (Figure 5). 

Free 8D Report Template Download

You can download the below 8D report, which you can use for commercial and noncommercial projects. Don’t forget to mention Designorate as the source of this free 8D report.

The 8D Problem Solving process provides a reliable and systematic method that ensures that the problems inside a company or project are solved by eliminating their root causes and preventing recurrence. However, it is most suitable for complex problems that can take weeks or even months to solve. Therefore, the first stage aims to determine if the 8D process is ideal for the problem or if more straightforward tools should be implemented. If the 8D problem solving method is appropriate for your business problem, you have a step-by-step template to guide you through your attempts to find a suitable solution to the obstacle you need to overcome.

Wait, Join my Newsletters!

As always, I try to come to you with design ideas, tips, and tools for design and creative thinking. Subscribe to my newsletters to receive new updated design tools and tips!

Dr Rafiq Elmansy

As an academic and author, I've had the privilege of shaping the design landscape. I teach design at the University of Leeds and am the Programme Leader for the MA Design, focusing on design thinking, design for health, and behavioural design. I've developed and taught several innovative programmes at Wrexham Glyndwr University, Northumbria University, and The American University in Cairo. I'm also a published book author and the proud founder of Designorate.com, a platform that has been instrumental in fostering design innovation. My expertise in design has been recognised by prestigious organizations. I'm a fellow of the Higher Education Academy (HEA), the Design Research Society (FDRS), and an Adobe Education Leader. Over the course of 20 years, I've had the privilege of working with esteemed clients such as the UN, World Bank, Adobe, and Schneider, contributing to their design strategies. For more than 12 years, I collaborated closely with the Adobe team, playing a key role in the development of many Adobe applications.

You May Also Like

Measuring Design Thinking Impact

Can We Apply Design Thinking in Education?

10 Success Factors for the Experience Design Process

How to Create a Professional Creative Brief?

How to Run a Successful Brainstorming Session

4 Service Design Tools to Focus on Consumers’ Needs

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Sign me up for the newsletter!

8D Chess: How to Use The 8 Disciplines for Problem Solving

Hospitals have developed something of a reputation for being rife with bad processes . When processes aren’t adequate, the result is an abundance of “workarounds”.

For example, when equipment or supplies are missing, a nurse might waste time running around searching for what is needed, and once the item is found, return to their previous duties.

One study indicates that nurses spend 33 minutes of a 7.5-hour shift completing workarounds that are not part of their job description.

This may well “put out the fire” so-to-speak, but really it is just a hastily applied band-aid that does nothing to treat the root cause of the problem.

More time is wasted and more problems will arise in the future because nothing has been done to prevent the initial problem from happening again.

Individual nurses are not at fault here; workplace culture often values expertise in the form of those who “get the job done”, which tends to pull against the notion of spending time building good processes (time in which the job is perhaps not “getting done”).

So how to approach the problem of problem solving ?

In a lean context, problem solving can be distilled into two simple questions:

• What is the problem and how did it happen?
• How can we make sure that it doesn’t happen again?

The 8D, or eight disciplines methodology, is a problem solving process – most likely one of the most widely used problem solving processes out there. It is used by many different countries, in many different industries, and many different organizations.

8D is designed to help you put out those fires, and make sure they don’t happen again.

In this article, I’ll introduce you to the 8D problem solving methodology and provide you with an outline of the basic process that you can hopefully apply in your own business, plus how you can enhance 8D with other tools and methodologies like Six Sigma , FMEA , and Process Street .

Here’s what I hope you’ll take away after reading:

• An understanding of the basics of 8D
• Advantages of using 8D
• The purpose and objectives of each phase of the 8D process
• An understanding of how to use 8D for problem solving
• How 8D works with other problem solving tools
• How you can use Process Street to maximize the potential of the 8D framework

Let’s begin with the origins of 8D – what is it, and where did it come from?

What is 8D?

8D (sometimes Global 8D or G8D) stands for eight disciplines, and is a problem solving methodology. It’s basically a process for understanding and preventing problems.

Much like how risk management seeks to take a proactive, preventative stance, 8D aims to gain insight into the root causes of why the problems happen, so they won’t happen again.

The 8D process involves eight (sometimes nine) steps to solve difficult, recurring problems. It’s a transparent, team-based approach that will help you solve more problems in your business.

8D origins: Where did it come from?

Despite the popular story that 8D originated at Ford, it was in fact developed in 1974 by the US Department of Defence, ultimately taking the form of the military standard 1520 Corrective Action and Disposition System for Nonconforming Material .

Ford took this military standard, which was essentially a process for quality management , and expanded on it to include more robust problem solving methods.

In 1987, Ford Motor Company published their manual, Team Oriented Problem Solving (TOPS) , which included their first iteration of the 8D methodology.

Initially termed Global 8D (or G8D) standard, it is currently used by Ford and many other companies in the automotive supply chain.

8D, PDSA, & other problem solving processes

The disciplines of 8D follow the same logic as the Deming Cycle (also known as PDSA, and sometimes PDCA).

PDSA stands for Plan, Do, Study, Act (or Check, in the case of PDCA).

The similarity lies in the fact that both PDSA and 8D are designed to be used to improve processes. They’re both examples of cycles of continuous improvement.

Whereas 8D may be painted as a more generic problem-solving framework, structurally speaking both 8D and PDSA share a lot in common.

The simple idea of beginning with a clear objective, or desired output, and then testing, analyzing , and iteratively tweaking in a continuous cycle is the basis for both methodologies.

There are, of course, differences. We’ll cover the different applications of both 8D and PDSA in this article.

8D advantages

One of the main strengths of 8D is its focus on teamwork. 8D philosophy encourages the idea that teams, as a whole, are more powerful than the sum of the individual qualities of each team member.

It’s also an empirical methodology; that is to say that it is a fact-based problem solving process.

A branch of continuous improvement, proper use of 8D will help you coordinate your entire team for effective problem solving and improved implementation of just about all of the processes used in your business.

The 8 disciplines for problem solving

As you may have noticed, we’re starting with zero, which makes nine total disciplines. This “zero” stage was developed as an initial planning step.

D0: Plan adequately

Make comprehensive plans for solving the problem including any prerequisites you might determine.

Be sure to include emergency response actions.

D1: Establish your team

Establish your core team with relevant product or process knowledge. This team will provide you with the perspective and ideas needed for the problem solving process.

The team should consist of about five people, from various cross-functional departments. All individuals should have relevant process knowledge.

A varied group will offer you a variety of different perspectives from which to observe the problem.

It is advisable to establish team structure, roles, and objectives as far ahead in advance as possible so that corrective action can begin as quickly and effectively as possible.

D2: Describe the problem

Have your team gather information and data related to the problem or symptom. Using clear, quantifiable terms, unpack the problem by asking:

D3: Contain the problem (temporary damage control)

Depending on the circumstances, you may need to mobilize some kind of temporary fix, or “firefighting”.

The focus of this stage should be on preventing the problem from getting worse, until a more permanent solution can be identified and implemented.

D4: Identify, describe, and verify root causes

In preparation for permanent corrective action, you must identify, describe, and verify all possible causes that could contribute to the problem happening.

You can use various techniques for this, including a Failure Modes and Effects Analysis , or Ishikawa (fishbone) diagram .

It’s important that the root causes are systematically identified, described in detail, and promptly verified (or proved). How each cause is verified will depend on the data type and the nature of the problem.

Take a look at the section towards the end of this article for some more problem solving tools to help you decide the right approach.

D5: Identify corrective actions

You must verify that the corrective action you identified will in fact solve the problem and prevent it from happening again in the future (or whatever is your desired threshold of recurrence).

The best way to do this is to collect as much data as possible and by performing smaller-scale “pilot” tests to get an idea of the corrective action’s impact.

You can’t begin to identify the optimal corrective action until you have identified the root cause(s) of the problem.

D6: Implement and validate corrective actions

Carry out the corrective actions, and monitor short and long term effects. During this stage, you should assess and validate the corrective actions with empirical evidence.

Discuss and review results with your team.

D7: Take preventative measures (to avoid the problem happening again)

Here is where you make any necessary changes to your processes, standard operating procedures , policies , and anything else to make sure the problem does not happen again.

It may not be possible to completely eliminate any chance of the problem recurring; in that case, efforts should focus on minimizing possibility of recurrence as much as possible.

D8: Congratulate your team

It’s important to recognize the joint contribution of each and every one of the individuals that were involved in the process.

Team members should feel valued and rewarded for their efforts; this is crucial and perhaps the most important step – after all, without the team, the problem would not have been fixed.

Providing positive feedback and expressing appreciation helps to keep motivation high, which in turn improves the sense of process ownership and simply increases the likelihood your team will actually want to improve internal processes in the future.

How to use 8D for problem solving

The 8D method above outlines a proven strategy for identifying and dealing with problems. It’s an effective problem solving and problem prevention process.

In addition to avoiding long-term damage from recurring problems, 8D also helps to mitigate customer impact as much as possible.

More than just a problem-solving methodology, 8D sits alongside Six Sigma and other lean frameworks and can easily be integrated with them to minimize training and maximize efficacy.

8D is definitely a powerful framework on its own, but it really shines when combined with other synergistic concepts of lean and continuous improvement.

More problem solving tools that synergize well with 8D

8D has become a leading framework for process improvement, and in many ways it is more prescriptive and robust than other more simplistic Six Sigma approaches.

However, there are many Six Sigma methodologies, and even more frameworks for problem solving and process improvement .

The following improvement tools are often used within or alongside the 8D methodology.

DMAIC: Lean Six Sigma

DMAIC stands for:

The DMAIC process is a data-driven cycle of process improvement designed for businesses to help identify flaws or inefficiencies in processes.

Simply put, the goal with DMAIC is to improve and optimize existing processes.

Interestingly, the development of the DMAIC framework is credited to Motorola , whose work built upon the systems initially developed by Toyota .

In terms of working alongside 8D, you could use DMAIC to identify root causes as in D4; you could also implement the same techniques to better understand prospects for corrective actions as in D5, and D6.

We have a whole article on the DMAIC process, if you’re interested.

SWOT analysis

Strengths, Weaknesses, Opportunities, and Threats. You can use a SWOT analysis to gain insight into your organization as a whole, or on individual processes.

The main synergy with 8D is in the identification of opportunities, threats, and weaknesses.

These can represent opportunities for process improvements, weaknesses in your process that could produce problems further down the line, and threats, both internal and external, that may be out of your direct control but that could cause problems for you.

Here’s a SWOT analysis checklist you can use to structure your own analysis:

FMEA: Failure Mode and Effects Analysis

FMEA (Failure Mode and Effects Analysis) is a way of understanding the potential for problems and making preemptive preparations in order to avoid them. It is a method of risk management .

It is a type of preventative risk management process, and so works well in the context of identifying causes of problems so you can better deal with them.

FMEA and 8D work well together because:

• 8D can make use of information gathered during an FMEA process, like brainstorming sessions, to identify potential problems and their root causes.
• You can reuse possible cause information gathered during an FMEA process to feed into different representational diagrams like the Ishikawa (fishbone) diagram, which will help in the 8D process.
• 8D brainstorming data is useful for new process design. This allows the FMEA to take actual process failures into account, which produces more effective results.
• FMEA completed in the past can be used as databases of potential root causes of problems to inform 8D process development.

Here’s a free FMEA template for you to get started ASAP:

The Pareto Chart

The Pareto Chart helps us understand the impact of different variations of input on our output.

In relation to 8D, Pareto Charts can help us prioritize which root cause to target, based on which will have the greatest impact on improvement (where improvement is the desired output of the 8D process).

Here’s the Six Sigma Institute’s example Pareto Chart :

Here we have a simple deductive reasoning technique that asks “why?” five times to dig into the root cause of a problem.

The logic here is that by asking the same question five times, you work progressively “deeper” into the complexity of the problem from a single point of focus.

Ideally, by the fifth question you should have something that has a high likelihood of being a root cause.

This example from Wikipedia does a great job of conveying how the process works:

• The vehicle will not start. (the problem)
• Why? – The battery is dead. (First why)
• Why? – The alternator is not functioning. (Second why)
• Why? – The alternator belt has broken. (Third why)
• Why? – The alternator belt was well beyond its useful service life and not replaced. (Fourth why)
• Why? – The vehicle was not maintained according to the recommended service schedule. (Fifth why, a root cause)

Ishikawa diagrams (fishbone diagrams)

Sometimes called “cause-and-effect diagrams”, they are as such used to visualize the cause and effect of problems.

The approach takes six different categories and places information about the problem into different categories to help you understand what factors could be contributing to the problem.

One advantage over the 5 Whys approach is the way this method forces a more holistic perspective, as opposed to the potentially narrow vantage point offered by zooming in on a single aspect or question.

According to the Six Sigma Institute, the 6 key variables pertaining to root causes of problems are:

• Machine: Root causes related to tools used to execute the process.
• Material: Root causes related to information and forms needed to execute the process.
• Nature: Root causes related to our work environment, market conditions, and regulatory issues.
• Measure: Root causes related to the process measurement.
• Method: Root causes related to procedures, hand-offs, input-output issues.
• People: Root causes related people and organizations.

There’s also this useful illustration of a company using a fishbone diagram to better understand what factors contribute to a company’s high turn around time.

Gap analysis

A gap analysis is concerned with three key elements:

• The current situation, or “performance”
• The ideal situation, or “potential”
• What needs to be done in order to get from performance to potential, or “bridging the gap”

The “gap” is what separates your current situation from your ideal situation.

Businesses that perform a gap analysis can improve their efficiency and better understand how to improve processes and products.

They can help to better optimize how time, money, and human resources are spent in business.

There’s a lot that goes into a gap analysis, and quite a few different ways to approach it. Check out our article for a deeper dive into the gap analysis process.

Superpowered checklists

Checklists can be a great way to simplify a complex process into a series of smaller, easy-to-manage tasks. They’re one of the best ways to start using processes in your business.

By using checklists, you can reduce the amount of error in your workflow , while saving time and money by eliminating confusion and uncertainty.

What’s more, if you’re using Process Street, you have access to advanced features like conditional logic , rich form fields and streamlined template editing .

How to use Process Street for 8D problem solving

Good problem solving relies on good process. If you’re trying to solve problems effectively, the last thing you want is your tools getting in your way.

What you want is a seamless experience from start to finish of the 8D methodology.

The best kinds of processes are actionable. That’s why you should consider using a BPM software like Process Street to streamline recurring tasks and eliminate manual work with automation .

Process Street’s mission statement is to make recurring work fun, fast, and faultless. By breaking down a process into bite-sized tasks , you can get more done and stay on top of your workload.

Sign up today for a free Process Street trial!

Problem solving is an invaluable skill. What’s your go-to process for problem solving? We’d love to know how it compares with the 8D method. Let us know in the comments!

Get our posts & product updates earlier by simply subscribing

Oliver Peterson

Oliver Peterson is a content writer for Process Street with an interest in systems and processes, attempting to use them as tools for taking apart problems and gaining insight into building robust, lasting solutions.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Take control of your workflows today

Advisory boards aren’t only for executives. Join the LogRocket Content Advisory Board today →

• Product Management
• Solve User-Reported Issues
• Find Issues Faster
• Optimize Conversion and Adoption

An overview of the 8D problem-solving method

The 8D problem-solving method is a powerful tool in product management. It’s designed to help product managers tackle issues systematically and enhance product quality. This method follows eight steps in total, hence the name 8D.

The steps range from identifying problems to implementing long-term solutions. Today you’ll explore how you can effectively apply 8D to your products. You’ll also learn about the benefits of using this approach and analyze some real case studies.

What is 8D?

The 8D problem-solving method is designed to address and resolve problems by identifying, correcting, and eliminating recurring issues.

It involves eight different steps:

• Plan — Prepare for the problem-solving process
• Team selection — Assemble a team with the necessary knowledge and skills
• Problem definition — Clearly define the problem and its impact
• Interim containment action — Implement temporary measures to contain the problem
• Root cause identification — Identify the underlying cause(s) of the problem
• Permanent corrective action — Develop and implement a solution to address the root cause
• Preventive measures — Take steps to prevent the recurrence of the problem
• Team recognition — Acknowledge and reward the team’s efforts in resolving the issue

These steps focus on root cause analysis, preventive measures, and long-term solution implementation. The end goal is to improve product quality and operational efficiency.

The eight disciplines of 8D

The eight disciplines of the 8D method represent a comprehensive approach to solve problems within an organization. Each discipline is designed to guide teams through the process at each stage. Here’s a deeper look into each stage:

This initial step involves preparing for the problem-solving process. The goal here is to understand the problem’s magnitude and set up objectives. It’s about getting ready to tackle the issue systematically.

Team selection

In this step, a cross-functional team is formed. The team should consist of individuals with the necessary knowledge, skills, and experience to address the problem effectively. The team works together throughout the 8D process.

Problem definition

Next, the team has to describe the issue in specific terms. The goal here is to understand the impact and scope of the complication. A well-defined problem is easier to solve.

Interim containment

In the process of finding a solution, temporary measures are taken to contain the problem and prevent it from worsening. This reduces further damage or impact to the involved operations.

Root cause identification

In this phase, the team uses various tools and techniques to identify the underlying cause of the problem. An understanding of the root cause is essential for developing an effective, lasting solution.

Permanent corrective action

With the root cause identified, the team moves to develop a permanent corrective action plan to resolve the issue. Now, the team needs to choose the best solution, implement it, and monitor its effectiveness. This analysis will ensure that the problem is truly resolved.

Over 200k developers and product managers use LogRocket to create better digital experiences

Preventive measures

With such vast processes, there is always a possibility of the problem recurring. To resolve this, the team identifies and implements measures that address the root cause. There might be a need for changes to different aspects of the overall approach.

Team recognition

The final stage focuses on acknowledging and rewarding the team’s efforts. Recognizing the team’s hard work and success in resolving the issue is important for morale. It also promotes a culture of continuous improvement.

By following these eight disciplines, product managers can solve problems more effectively. The other benefit is that it builds a proactive culture that addresses issues before they escalate.

Applying 8D in product management

Applying the 8D problem-solving method in product management involves leveraging its structured approach. This helps you eliminate problems and process improvement initiatives.

Problem identification

The 8D process begins with gathering data and feedback to quickly identify potential issues. After that, a diverse team from various departments works together to uncover issues. And finally, the team solves the problems efficiently.

Once a problem is spotted, quick fixes are applied to limit its impact. Simultaneously, you explore root causes of an issue using methods like the Five Whys . The final step is to implement the solution based on these insights. Occasionally, redesigns or process upgrades are also used to resolve the issue thoroughly.

Elimination

To eliminate recurring problems, it’s crucial to establish preventive measures. Several steps support the main goal of elimination including process adjustments, quality control improvements, and updates to design standards.

The insights gathered from each 8D cycle help with continuous improvement. It also aids in formulating strategies to avert future issues.

Benefits of the 8D method

The main benefit of using the 8D method is its impact on teamwork and continuous improvement. The more obvious benefits focus on root cause analysis and prevention of issues:

• Enhanced quality control
• Efficient problem resolution
• Systematic and thorough approach
• Teamwork and knowledge sharing
• Focus on root cause analysis
• Reduced recurrence of issues
• Cost reduction
• Improved customer satisfaction

The systematic approach to address issues ensures that no effort goes to waste. Eventually, it helps the teams to quickly propose long-term solutions to a range of problem patterns.

Challenges in implementing 8D

The 8D problem-solving method is extremely valuable when used in the right manner. However, there can be challenges at every stage of this process. Because of this, it’s beneficial for you to have an understanding of how to quickly identify these challenges.

These include:

• Resistance to change among team members
• Insufficient teamwork and collaboration
• Lack of training on the 8D methodology
• Difficulties in data collection and analysis

How to solve them?

• Clearly communicate benefits to overcome resistance
• Foster collaboration and teamwork among participants
• Provide targeted training on the 8D process
• Encourage data analysis for effective problem-solving

For a deeper understanding, let’s take a look at two case studies of how the 8D process can enhance the product management workflow.

Real-life examples of 8D

A leading tech company, (similar to Apple) faced public backlash over smartphones overheating and reduced battery life. In this context, the 8D method helped to quickly identify and contain the issues.

The root cause analysis helped it track the problem back to a battery design flaw. Collaborative efforts with the battery supplier led to a redesigned battery and an update to the operating system. This not only resolved the issue but also restored consumer trust. Eventually, the brand’s reputation for quality was restored.

Similarly, a major automaker found a software glitch in its driver-assistance systems. This issue was risking driver safety. Using the 8D method, it pinpointed outdated algorithms as the root cause. The solution was simple, it issued a software update and enhanced its development processes.

Both of these examples are evidence of how the 8D method can be utilized to prevent complications efficiently.

Key takeaways

In wrapping up, it’s clear that this approach is more than just a procedure. Think of it as a strategic framework designed for the product manager. The 8D method equips you with a robust toolkit for addressing and preempting issues, systematically.

On top of that it helps you to:

• Promote teamwork and continuous improvement
• Reduce problem recurrence through root cause analysis
• Overcome implementation challenges with effective communication

Feel free to comment with any questions you may have!

Featured image source: IconScout

LogRocket generates product insights that lead to meaningful action

Get your teams on the same page — try LogRocket today.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on Reddit (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Facebook (Opens in new window)
• #agile and scrum
• #project management

Stop guessing about your digital experience with LogRocket

Recent posts:.

5 lessons from helping 9 startups move to outcome-driven work

Learn five essential lessons from guiding nine startups to an outcome-driven, product-led approach, including niche focus, flexible frameworks, and decisive action.

Leader Spotlight: Slowing things down to run really fast, with Brian Bates

Brian Bates, Senior Vice President of Business Development at Lively Root, talks about how he works to scale small startups.

Building and scaling product teams in startups vs. large enterprises

When a product team is scaled correctly, it is well-equipped to meet unique challenges and opportunities in an ever-changing product landscape. Discover how to build and scale product teams effectively, no matter the size of your organization.

Crafting meaningful core values for your company

Core values provide all individuals within an organization a framework to make their own decisions on a day-to-day basis.

Leave a Reply Cancel reply

Published: November 7, 2018 by Ken Feldman

It’s easy to feel overwhelmed by the number of different approaches to problem solving. Some of the most common ones are PDCA , DMAIC , A3, 6S , Agile , 5 Whys , fishbone diagrams , and others. In this article, we’ll look at the 8D process for problem-solving and process improvement. We will present the benefits of 8D along with some best practices and an example of how to use it. This will provide you with some practical applications for use in your own organization.

Overview: What is the 8D process? 

The history of 8D is somewhat controversial. While everyone seems to agree that the popularity of the approach can be credited to Ford Motor company, the basis of the process is a little less clear. Senior leadership at Ford saw the need for the Powertrain division to have a methodology where teams could work on recurring problems. 

In 1986, work began to develop a manual and training course that would create a new approach to solving engineering design and manufacturing problems. The title of this manual was Team Oriented Problem Solving (TOPS), and it was first published in 1987. But where did the original idea come from?

Many give credit to the U.S. War Production Board, which developed a simple, four-step approach in 1945 for improving job methods. Here’s what they looked like.

Image source: allaboutlean.com .

In reality, the 8D process is officially known as the Eight Disciplines of Problem-Solving. To make things a little more confusing, it’s really nine steps. While originally developed as 8 steps or disciplines, it was subsequently revised to include a step zero, which was to plan and prepare for solving the problem.

Image source: ASQ.org .

Let’s provide a little more detail for each step.

• D0 — Plan: Collect information and data on the problem symptoms. Decide what preparations will be needed to complete the 8D process. Decide whether you will need an Emergency Response Plan to minimize or mitigate the immediate impact of your problem on the customer.
• D1 — Create a team: Put together a cross-functional team consisting of a core group plus a selection of subject matter experts ( SMEs ). Be sure to provide everything the team will need to be successful, including any training needed to properly execute the process.
• D2 — Define and describe the problem: Using relevant data, describe the problem in as detail as possible. Be sure to focus on your problem at this point, not your solution.
• D3 — Contain the problem: Protect your customer by creating containment actions to prevent any further negative impact to them.
• D4 — Identify, describe, and verify root causes: You can use a multitude of tools such as the 5 Whys, fishbone diagrams, brainstorming , and others to identify potential root causes. Use data to validate your root causes.
• D5 — Choose corrective actions: Select the most appropriate actions to resolve and eliminate the root causes of your problem. 
• D6 — Implement and validate your corrective actions: Implement your recommended solutions and corrective actions, and continue to monitor to assure yourself that they actually solved your problem.
• D7 — Take preventative measures: Revise your systems to proactively try to prevent these and similar problems from arising in the future.
• D8 — Congratulate your team: Communicate the work of the team and celebrate their efforts.

3 benefits of the 8D process 

It goes without saying that removing problems, improving your process, and preventing future problems will provide many benefits to your organization. Here are a few.

1. Simple and effective 

The 8D process has been compared to the PDCA model. Like PDCA, 8D is structured, organized, and simple in concept. 

2. Drives you to the root cause 

By following the sequential steps, this process should lead you to the elimination of your problem and prevent it from arising again. 

3. Team approach 

The use of a cross-functional team composed of a core group of people working in the problem area as well as subject matter experts contributing on an as needed basis will give you the synergy of combined knowledge and experience that should lead you to a solution. 

Why is the 8D process important to understand? 

While simple in concept, there are a number of things you should understand that will make this process both effective and efficient.

Elimination of the root cause

If you understand and follow the 8D steps, you will be able to eliminate — or at least mitigate — the negative impact of your problem.

Discipline 

The 8D steps are sequential and build on each other. If you have the discipline to stay on track, you will optimize the use of the 8D process. 

Problem-solving tools 

8D is a process and methodology. You will need to understand the purpose of each step so you can apply the proper problem-solving tools in each step.  

An industry example of 8D

A consumer product company located in Mexico City was experiencing an increase in its delivery trucks returning without having made product deliveries to its customers. There did not seem to be an obvious reason or solution, so the president of the company chartered a team to look into the problem. He assigned the company’s Lean Six Sigma Master Black Belt to put together and facilitate a team and chose to use the 8D problem-solving methodology.

He followed the process by first having a planning and preparation meeting to lay out the plan for analyzing the problem. He suggested that some of the delivery supervisors go out into the field to see if they can observe any unusual conditions. They also collected some data and recorded their observations.

A vigorous brainstorming session ensued in which the team listed all the possible reasons the problem was occuring. These potential root causes were validated by the data that was collected and the observations of the supervisors. They discovered the trucks were coming back without delivering all of the product because the customers didn’t have enough money to pay for the product. These were very small customers who had to pay cash on delivery.

The question then became: Why didn’t they have enough money? The next root cause was that the trucks were arriving later in the day, after the customer had already paid for most of their other deliveries and thus had no money left. Why were the trucks arriving so late? Because they got stuck in traffic because they left the yard too late. Why were they leaving so late? Because they were loading the trucks and doing the paperwork in the morning.

Eventually, the team arrived at a solution that had the trucks loaded, prepped, and ready to go when the drivers arrived early in the morning. The result was a dramatic reduction in returned goods and a significant increase in cash flow. The president was confident that the use of the 8D process got them to the right solution quickly and efficiently.

3 best practices when thinking about the 8D process

Like most of the other problem-solving approaches, there are some recommended practices that will help you and your team be successful. Here are a few that will help you stay on track. 

1. Pick the best team that you can 

Don’t seek volunteers, but hand-select the best team members that are available. It will be their knowledge and expertise that will make the team successful. Likewise for the team facilitator or leader.

2. Take your time 

Don’t rush to solutions or what you think is the root cause of your problem. Thoroughly explore your problem so that the solutions that you eventually come up with will resolve the problem and prevent future occurrences. Think creatively.

3. Be specific about what your problem is

Use data to help you understand your problem. Don’t just rely on anecdotal stories or assumptions to decide the root cause of your problem.

Frequently Asked Questions (FAQ) about 8D

1. when should i use the 8d process.

Use this process when you’re trying to solve for safety or regulatory issues, increasing customer complaints, warranty costs (which indicate greater-than-expected failure rates), internal rejects, waste, scrap, and poor performance or test results.

2. Can the 8D process be used in non-manufacturing processes?

Yes. While the 8D process was developed in the manufacturing function of Ford Motor Company, it can just as easily be applied in any type of process or function where you are experiencing problems.

3. What is the difference between the 8D and 5D process? 

For a less complex problem, you may decide to use a 5D process. This simplified process will have you form a team, identify your problem, implement containment actions, identify the root cause, and implement corrective actions to eliminate the problem.

So, what is the 8D process? 

The 8D process, also known as the Eight Disciplines of Problem Solving, is a method developed at Ford Motor Company used to resolve problems. It is focused on product and process improvement. 

The purpose of 8D is to identify, correct, and eliminate recurring problems. It establishes a permanent corrective action based on a problem analysis and determination of the root causes. Although it was originally comprised of eight stages, or “disciplines,” it was later revised to nine to include a planning and preparation stage.

About the Author

Ken Feldman

No Problem at All: Diagnosing the 8 Disciplines of Problem Solving

When problems appear, discipline is vital. Disciplines also help, and the eight disciplines of problem-solving (also referred to as the 8Ds) offer a proven process improvement structure that provides a framework for identifying root causes, eliminating them, and preventing reoccurrence.

The enduring popularity of the 8Ds attests to their power. It’s a tried and tested format on which you can rely — no matter what has gone wrong elsewhere.

How the 8 Disciplines of Problem Solving Evolved

In the 1980s, the Ford Motor Company published its manual, Team Oriented Problem Solving   (TOPS), the first articulation of the 8Ds. Eventually, it refined the original procedures into the current 8Ds.

Ford also added an initial planning stage (D0). There are now nine steps of 8D. Fortunately, the actual process is more intuitive than its numbering.

Initially developed for the auto industry, the 8D problem-solving process has been successfully adopted across multiple industries, including healthcare, government, finance, retail, and manufacturing.

How 8D Can Help You

The benefits of 8D  include:

• More effective and efficient problem solving
• A team-oriented approach
• Open communication within the team and with management
• A framework for corrective action that allows for systemic changes and continual improvement
• Intense examination of the control systems that permitted the problem
• Easy integration with process-improvement tools

You can apply the 8Ds whenever processes break down. Engineers and manufacturers often turn to them when they receive customer complaints or discover safety or regulatory issues. They also come in handy when a system’s amount of waste or a product’s failure rates hit problematic levels.

What Are the 8 Disciplines of Problem Solving?

The 8Ds provide a methodical approach to problem-solving. The sequence of nine steps will take you from the initial discovery of an issue to your celebratory toast when you fix it.

The designers added a planning stage to the original 8D methodology. This stage focuses on the one following, bringing clarity and intention to the project.

Summarize the Issue

You’ll describe it in greater detail later, but you’ve started this process because you identified a problem. What is it?

Collect the information on the problem’s symptoms and identify apparent gaps or additional needs. You might also want to consult a subject matter expert and get their input on your issue. They may be able to save you time further down the road.

Identify and Take Emergency Responses

If your house is on fire, put it out. Then you can take a hard look at the wiring.

As soon as you’ve identified a problem, take any necessary action to limit or contain a dangerous situation. Don’t overreact or prematurely make uncertain changes. Just exercise common sense.

Plan for the 8Ds

Your actual project plan will change as you make discoveries. This document is simply an outline of the project’s space within your company. It’s a theory about the necessary investment of time and other scarce resources.

Identify the resources you have and need. Sketch out schedules and note the variables that will affect them.

D1: Form Your Team

Create a team to tackle the problem.

Add the Right People

The group should be small enough to be efficient but large enough to cover all necessary process/product knowledge and technical skills. Some recommend a team of about five members. Make sure this team has the necessary authority and allotted time they need.

Identify both a team leader and a project champion in management (if necessary). Establish guidelines for harmonious group work.

This is also the time to perform team-building exercises if you want.

Review the Problem

Get team members up to date and fully on board. Review the initial brief for the project and discuss scope and priorities. Team members should all have the opportunity to voice initial concerns and complications.

D2: Define and Describe the Problem

Outline the problem in as much detail as possible, using quantifiable terms. Clarify both what the problem  is  and  is not . The latter will help you begin eliminating potential reasons for failure.

As you define the problem, you should also understand whether your situation is “something changed” or “never been there.” Has something gone off course, or has a new variable or context appeared?

Identify Critical Process Steps

Create a flowchart for the flawed process, and indicate which steps are critical to the problem at hand. In this step, you will start to approach root cause analysis, though you won’t isolate and verify a root cause until D4.

Outline Project Plan

At this point, you will develop a more detailed, high-level project plan that includes milestones, objectives, and a fuller schedule.

D3: Contain the Problem

D3 focuses on  interim  containment action rather than permanent and preventive action.

This step isn’t about emergency action, which should have been taken already. You’ve put out the house fire, but you still need to lodge your tenants elsewhere while your electricians go through the place.

Find a Temporary Solution

Take whatever action is necessary for the satisfaction of your customers or the effectiveness of your organization. You may need to develop workarounds, issue (non-emergent) recalls, or establish a resource for affected customers.

The ideal interim solution is:

• Inexpensive
• Simple and quick to implement
• Easy to reverse
• Validated by customer or employee feedback

When you’ve realized your long-term solution, you can do away with interim measures.

D4: Find the Root Cause

Root cause analysis is at the heart of most problem-solving tools and processes. It’s time to dig deep into the problem and find out what’s gumming up the works.

Develop Root Cause Theories

You’ll complete the process of elimination that you began when defining the problem. Refer to your flowchart. What could be causing the problem?

Use root cause analysis tools like the Fishbone Diagram  and the five whys . Find all possible factors that could contribute to the breakdown.

Test and Review Causes

Test each of your potential causes, collecting data until you can rule out all but one.

Identify Escape Point

In addition to finding the root cause, you need to figure out what part of the control system allowed it to escape detection and be contained. Find the point where someone or something should have caught the issue. That’s the escape point.

Correctly identifying and solving escape-point issues is essential to preventing future problems.

D5: Identify and Test Solutions

You’ve found the problem and its escape point. Of course, that’s only half the battle. Now you need to solve them — permanently and completely.

Define what “solved” looks like. Is there a threshold of minimum acceptability?

Develop Solutions

Give your team the time to consider potential approaches to both the root cause and escape point issues. The first idea may not be the best, and brainstorming tools such as affinity diagrams  can help.

Test Solutions

Make sure they work. You should also perform risk and cost analysis for any final contenders.

D6: Choose Solutions and Put Them Into Practice

Choose your best solutions, outline your implementation plan, and move forward with it. Both management and team members should sign off on the solution.

Implement, Validate, Monitor

After putting your plan into practice, check with customers and stakeholders to ensure that their concerns are fully addressed. Continue to monitor the situation to make sure the solution is sustainable and effective. You’ll also keep an eye out for any unintended consequences.

Move From the Interim to the Permanent Solution

Once you have the permanent solution up and running, you can end interim measures.

D7: Prevent Recurrence

By addressing the escape point and continuing to monitor the situation, you’re doing a fair amount to prevent an  exact  recurrence. But make sure that all contributing systems have been updated to reflect new input.

You should also preserve all documentation so that future teams have it as a resource for similar problems. Even better, prevent those similar problems.

Improve and Standardize Systems Across the Organization

Are there analogous areas of the organization that could use review? Are their policies and procedures in line with those you’ve developed?

Conduct an audit of operational procedures, management processes, and training manuals.

D8: Celebrate and Recognize Contributions

You’re not done quite yet. Recognition and validation are vital for a healthy organization, so take time to acknowledge individual contributions and the team’s accomplishments.

Perform a Final Review

Look at team output with a focus on before-and-after results. Finalize documentation and add it to the company library.

You should also take the time to reflect on your 8D experience. Explore trouble spots or areas that could use clarification for the next problem-solving team.

Reward your team appropriately. This can include anything from company-wide emails to dinner to bonuses. Even a personal email goes a long way toward making people feel like valued members of a community.

Then Do It All Again

When you make the eight disciplines of problem-solving part of your organizational DNA, you prepare to solve all kinds of problems in a streamlined, effective way.

The 8Ds integrate seamlessly with the Six Sigma methodology and make a great addition to your toolkit.

Lean Six Sigma Training Certification

• Facebook Instagram Twitter LinkedIn YouTube
• (877) 497-4462

8D Corrective Action: Mastering Problem-Solving for Continuous Improvement

May 13th, 2024

Businesses constantly refine products, services, and workflows to stay ahead. But issues can still pop up, angering customers and jacking costs while hurting a company’s image. This is where the 8D corrective action problem-solving method earns its stripes.

It was developed by Ford in the 80s and has since spread widely across manufacturing, healthcare, aerospace, and more.

The 8D approach is a methodical process combining pros from different parts of the company, analytical tools, and fact-based decision-making.

By following its eight systematic steps, organizations can expertly handle thorny problems. They uncover root causes and implement lasting fixes addressing immediate concerns while fueling constant upgrades to prevent repeat issues.

Key Highlights

• Understanding the origins and history of the 8D corrective action methodology, its benefits, and when to apply it for optimal results.
• Exploring the eight disciplined steps of the 8D corrective action process.
• Integrating the 8D methodology with quality management systems, leveraging Enterprise Quality Management Software (EQMS) to streamline workflows.
• Examining case studies and examples from various industries, including manufacturing, service, healthcare, and the automotive sector.

Understanding the 8D Corrective Action Problem-Solving Methodology

The Eight Disciplines (8D) methodology is a structured, team-based approach to problem-solving that aims to identify the root causes of issues and implement effective corrective actions. 

It is a comprehensive framework that combines analytical tools, cross-functional collaboration, and a disciplined mindset to tackle complex problems systematically.

The 8D process establishes a step-by-step approach that guides organizations through eight distinct disciplines, each building upon the previous one. 

Origins and History of 8D Corrective Action

The origins of the 8D methodology can be traced back to the 1980s when it was developed and pioneered by Ford Motor Company. 

Initially referred to as “ Team Oriented Problem Solving ” (TOPS), this approach was designed to address the recurring quality issues that plagued the automotive industry at the time.

Recognizing the limitations of traditional problem-solving techniques, Ford sought to establish a more robust and effective framework that would not only resolve immediate concerns but also drive continuous improvement and prevent future issues. 

The 8D methodology quickly gained traction within Ford and was subsequently adopted as the company’s primary approach for documenting and addressing problem-solving efforts.

As the benefits of the 8D corrective action process became evident, it rapidly gained popularity among other manufacturers and industries, transcending its automotive roots. 

Today, the 8D methodology is widely employed across various sectors, including manufacturing, healthcare, aerospace, and service industries, among others.

Benefits of Using 8D Corrective Action

Implementing the 8D problem-solving methodology offers numerous benefits to organizations, including:

1. Systematic Approach : The structured nature of the 8D process ensures a consistent and comprehensive approach to problem-solving, reducing the risk of overlooking critical factors or jumping to premature conclusions.

2. Root Cause Identification : By emphasizing root cause analysis , the 8D methodology goes beyond addressing surface-level symptoms and focuses on identifying and eliminating the underlying causes of problems.

3. Cross-Functional Collaboration : The team-based approach fosters cross-functional collaboration, leveraging diverse perspectives and expertise from various departments, leading to more robust and well-rounded solutions.

4. Preventive Measures : The 8D corrective action process incorporates preventive actions to mitigate the recurrence of similar issues, promoting a culture of continuous improvement and proactive problem-solving.

5. Improved Quality and Reliability : By addressing root causes and implementing corrective actions, organizations can enhance the quality and reliability of their products, services, and processes, leading to increased customer satisfaction and cost savings.

6. Knowledge Sharing and Organizational Learning : The documentation and archiving of 8D processes facilitate knowledge sharing and organizational learning, enabling teams to build upon past experiences and lessons learned.

When to Apply 8D Corrective Action

The 8D problem-solving methodology is particularly valuable in situations where:

• Root Cause Analysis is Required: When issues persist despite initial troubleshooting efforts, or when the underlying causes are not immediately apparent, the 8D process can provide a structured approach to root cause analysis.
• Recurring Problems: If an organization experiences recurring problems or quality issues, the 8D methodology can help identify and eliminate the root causes, preventing future occurrences.
• Quality Issues with Significant Impact: When quality issues have a substantial impact on customer satisfaction, safety, regulatory compliance, or financial performance, the rigorous 8D approach can be employed to address the problem comprehensively.
• Complex Problems: For intricate problems involving multiple factors, processes, or departments, the cross-functional nature of the 8D team and the systematic approach can facilitate a thorough investigation and effective solution development.

By understanding the core principles, benefits, and appropriate application scenarios of the 8D problem-solving methodology, organizations can leverage this powerful framework to drive continuous improvement , enhance quality, and maintain a competitive edge in their respective industries.

The Eight Disciplines (8D) Process

At the heart of the 8D corrective action methodology lies a structured, step-by-step approach that guides organizations through eight distinct disciplines. 

Each discipline builds upon the previous one, ensuring a thorough investigation, analysis, and resolution of the problem at hand.

The eight disciplines of the 8D process are designed to facilitate a systematic and disciplined approach to problem-solving, leveraging cross-functional collaboration, analytical tools, and data-driven decision-making. 

D0: Planning and Preparation

Before embarking on the 8D corrective action journey, proper planning and preparation are crucial. This initial step, often referred to as Discipline Zero (D0), lays the foundation for a successful problem-solving effort.

During D0, the team gathers relevant information about the problem, assesses the need for interim containment actions, and establishes the prerequisites for forming an effective cross-functional team. 

This stage involves collecting data on symptoms, identifying potential risks, and ensuring that the necessary resources and support are in place to execute the 8D process effectively.

D1: Team Formation

The first formal discipline of the 8D process focuses on assembling a cross-functional team with the collective knowledge, skills, and expertise required to tackle the problem at hand. 

Effective team formation is critical to the success of the 8D corrective action effort, as it ensures diverse perspectives and a comprehensive understanding of the issue.

During D1, team members are carefully selected from various departments or functions, such as product engineering, process engineering, quality assurance, and data analysis.

Best practices in team formation involve considering factors such as technical expertise, problem-solving skills, interpersonal abilities, and the availability and commitment of potential team members. 

Establishing ground rules, communication protocols, and team-building exercises can further enhance collaboration and effective teamwork.

D2: Problem Description

In Discipline 2, the team focuses on accurately describing the problem, utilizing quantitative data and evidence-based approaches. 

This step is crucial, as it establishes a shared understanding of the issue and guides the subsequent steps of the 8D process.

The problem description involves defining the problem statement in specific, measurable terms, identifying the affected product or process, and quantifying the impact on operations, quality, customer satisfaction, and costs. 

Tools such as the “ 5 Whys ” technique, Ishikawa (fishbone) diagrams , and “ Is/Is Not ” analysis can aid in this process, helping to capture relevant details and categorize information.

D3: Interim Containment Actions

While the team works towards identifying and implementing permanent solutions, Discipline 3 focuses on implementing interim containment actions to mitigate the immediate impact of the problem and protect customers from further exposure.

Interim containment actions are temporary measures designed to isolate the problem and prevent it from causing further harm or spreading to other areas, processes, or products. 

These actions may include segregating defective products, implementing additional inspections or checks, or introducing manual oversight until permanent corrective actions are in place.

It is essential to verify the effectiveness of interim containment actions and monitor their implementation to ensure that they are successful in containing the problem and minimizing its impact on operations and customers.

D4: Root Cause Analysis

At the core of the 8D corrective action process lies Discipline 4, which focuses on identifying the root causes of the problem through rigorous analysis and data-driven investigation. 

This step is crucial, as it lays the foundation for developing effective and sustainable corrective actions.

During root cause analysis, the team employs various analytical tools and techniques, such as comparative analysis , fault tree analysis , and root cause verification experiments. 

These methods help to isolate and verify the underlying causes of the problem, separating symptoms from true root causes.

Thorough documentation and verification of root causes are essential in this discipline, ensuring that the team has a solid foundation for developing effective corrective actions.

D5: Permanent Corrective Actions (PCAs)

Building upon the insights gained from root cause analysis , Discipline 5 focuses on selecting and verifying permanent corrective actions (PCAs) that address the identified root causes and mitigate the risk of future occurrences.

During this stage, the team evaluates potential corrective actions based on their effectiveness in addressing the root causes, as well as their feasibility, cost, and potential impact on other processes or systems. 

Risk assessment tools, such as Failure Mode and Effects Analysis (FMEA), can aid in this evaluation process.

Once the most appropriate corrective actions have been selected, the team verifies their effectiveness through pilot testing , simulations, or other validation methods. 

This step ensures that the proposed solutions will indeed resolve the problem and prevent its recurrence without introducing unintended consequences.

Detailed planning and documentation of the corrective actions, including acceptance criteria, implementation timelines, and responsibilities, are critical components of Discipline 5.

D6: Implementation and Validation

In Discipline 6, the team focuses on implementing the selected permanent corrective actions and validating their effectiveness in resolving the problem and preventing future occurrences.

This stage involves developing a comprehensive project plan that outlines the steps, timelines, and resources required for successful implementation. 

Effective communication and coordination with all relevant stakeholders, including cross-functional teams and management, are essential to ensure a smooth transition and minimize disruptions.

During implementation, the team closely monitors the progress and performance of the corrective actions, gathering data and feedback to validate their effectiveness. 

This validation process may involve conducting simulations, inspections, or collecting performance metrics to assess the impact of the implemented solutions.

If the validation process reveals any shortcomings or unintended consequences, the team may need to revisit the corrective actions, make adjustments, or conduct further root cause analysis to address any remaining issues.

D7: Preventive Actions

Discipline 7 of the 8D process focuses on taking preventive measures to ensure that the lessons learned and improvements made during the problem-solving journey are embedded into the organization’s processes, systems, and culture.

In this stage, the team reviews similar products, processes, or areas that could be affected by the same or similar root causes, identifying opportunities to apply preventive actions more broadly. 

This proactive approach helps to mitigate the risk of future occurrences and promotes a culture of continuous improvement .

Effective implementation of preventive actions requires cross-functional collaboration, clear communication, and ongoing monitoring to ensure their sustained effectiveness.

D8: Closure and Celebration

The final discipline of the 8D process, D8, serves as a critical step in recognizing the team’s efforts, sharing lessons learned, and celebrating the successful resolution of the problem.

During this stage, the team conducts a final review of the problem-solving journey, documenting key lessons and insights that can be applied to future projects. 

This documentation not only preserves institutional knowledge but also facilitates continuous improvement by enabling the organization to build upon past experiences.

Equally important is the recognition and celebration of the team’s achievements. By acknowledging the collective efforts, dedication, and collaboration of team members, organizations can foster a positive and supportive culture that values problem-solving and continuous improvement.

Formal recognition events, such as team presentations or awards ceremonies, can be organized to showcase the team’s accomplishments and highlight the impact of their work on the organization’s quality, customer satisfaction, and overall performance.

By completing the eight disciplines of the 8D process, organizations can effectively navigate complex problems, identify root causes, implement sustainable solutions, and establish a foundation for continuous improvement and organizational learning.

Integrating 8D Corrective Action with Quality Management Systems

While the 8D problem-solving methodology offers a robust framework for addressing quality issues and driving continuous improvement, its effectiveness can be further amplified by integrating it with an organization’s quality management systems . 

Leveraging enterprise-level software solutions can streamline the 8D process, enhance collaboration, and foster a culture of continuous improvement.

The Role of EQMS in 8D Corrective Action

Enterprise Quality Management Software (EQMS) plays a pivotal role in supporting the successful implementation of the 8D corrective action methodology. 

By utilizing an EQMS, teams can benefit from features such as:

• Standardized 8D Workflows: Pre-configured 8D workflows and templates ensure consistency and adherence to best practices, guiding teams through each discipline with clearly defined tasks, responsibilities, and timelines.
• Collaboration and Communication: EQMS platforms facilitate cross-functional collaboration by providing secure document sharing, real-time updates, and centralized communication channels, ensuring that all stakeholders remain informed and engaged throughout the 8D process.
• Data Management and Reporting: Comprehensive data management capabilities within an EQMS enable teams to easily capture, analyze, and report on quality data, facilitating data-driven decision-making and root cause analysis during the 8D process.
• Integration with Quality Systems: EQMS solutions often integrate with other quality management systems, such as corrective and preventive action (CAPA) systems, enabling seamless information sharing and ensuring that the insights gained from the 8D process are incorporated into broader quality improvement initiatives.

Automating 8D Corrective Action Workflows

One of the key advantages of leveraging an EQMS is the ability to automate 8D workflows, streamlining the process and reducing the administrative burden on teams. 

Automated workflows also facilitate consistent documentation and record-keeping, which is essential for maintaining compliance with industry regulations and standards, as well as enabling knowledge sharing and organizational learning.

Data-Driven Decision-making

The 8D corrective action methodology heavily relies on data-driven decision-making, particularly during the root cause analysis and corrective action selection phases. 

An EQMS provides teams with powerful data analysis and reporting capabilities, enabling them to quickly identify trends, patterns, and correlations that can inform their decision-making process.

Continuous Improvement Culture

Ultimately, the integration of the 8D methodology with an EQMS fosters a culture of continuous improvement within an organization. 

The insights gained from the 8D process, coupled with the robust reporting and analytics capabilities of an EQMS, provide organizations with a wealth of data and knowledge that can be leveraged to drive ongoing process optimization and quality enhancement initiatives.

Case Studies and Examples of 8D Corrective Action

To illustrate the practical application and impact of the 8D problem-solving methodology, let us explore a few real-world case studies and examples from various industries. 

These examples will showcase how organizations have successfully leveraged the 8D approach to address quality issues, resolve complex problems, and drive continuous improvement.

Manufacturing Quality Issues

In the manufacturing sector, where quality and reliability are paramount, the 8D methodology has proven invaluable in addressing a wide range of issues. 

One notable example is a leading automotive parts manufacturer that faced recurring quality issues with a critical component, resulting in costly rework and customer dissatisfaction.

By implementing the 8D process, a cross-functional team was assembled to investigate the problem. Through root cause analysis , they identified a flaw in the supplier’s raw material handling processes, leading to inconsistencies in the component’s material properties.

The team implemented interim containment actions to segregate and inspect incoming materials, while also working with the supplier to implement permanent corrective actions, such as upgrading their material handling equipment and revising their quality control procedures.

Service Industry Applications of 8D Corrective Action

While the 8D corrective action approach is often associated with manufacturing, it has also proven valuable in the service industry, where quality and process excellence are equally critical. 

A prominent financial institution faced challenges with excessive customer complaints related to billing errors and account discrepancies.

By implementing the 8D methodology, a cross-functional team analyzed the problem, identifying root causes such as outdated software systems, inadequate training for customer service representatives, and inefficient data entry processes.

The team implemented interim containment actions, including manual account audits and increased customer communication, while also developing permanent corrective actions, such as upgrading their billing software, revising training programs, and streamlining data entry procedures.

Healthcare and Life Sciences

In the healthcare and life sciences industries, where patient safety and regulatory compliance are paramount, the 8D methodology has proven invaluable in addressing quality issues and mitigating risks.

A prominent pharmaceutical company faced a recurring issue with contamination in one of its drug products, posing potential health risks and regulatory concerns.

By implementing the 8D corrective action process, a cross-functional team investigated the issue, identifying root causes related to inadequate environmental controls in the manufacturing facility and inconsistencies in the cleaning and sterilization procedures.

Interim containment actions included quarantining and recalling affected product batches, while permanent corrective actions focused on upgrading the facility’s HVAC systems, revising cleaning and sterilization protocols, and implementing enhanced environmental monitoring.

Automotive Industry (origin of 8D Corrective Action)

It is fitting to revisit the automotive industry, where the 8D methodology originated. In a recent case study, a major automaker faced recurring issues with engine failures in one of their popular vehicle models, leading to costly warranty claims and customer dissatisfaction.

By implementing the 8D process, a cross-functional team investigated the issue, identifying root causes related to a design flaw in the engine’s cooling system and inadequate testing procedures during the product development phase.

Interim containment actions included issuing technical service bulletins and providing temporary cooling system modifications for affected vehicles.

Permanent corrective actions focused on redesigning the engine’s cooling system, implementing more rigorous testing protocols, and enhancing communication between the engineering and manufacturing teams.

Through the 8D process and integration with their quality management practices, the automaker successfully resolved the engine failure issue, regained customer trust, and enhanced their overall product quality and reliability.

The 8D corrective action problem-solving method has proven extremely useful for handling thorny quality issues, continuously upgrading workflows, and cultivating an excellence culture in businesses.

By pairing its structured team approach with analytical tools and fact-based choices, the 8D process empowers companies to uncover root causes. It also helps implement lasting fixes and prevent repeating mistakes through establishing protective measures.

As the case studies and examples show, it’s been put to great use across many industries from manufacturing to healthcare where it originated in automotive.

Its flexibility and power have made 8D valued for boosting quality, improving customer satisfaction and staying ahead competitively no matter the market.

The Eight Disciplines methodology remains a strong tool for companies serious about excellence, innovation, and customer focus.

By wholeheartedly embracing this robust framework and blending it with modern quality practices, businesses can expertly handle complex problems. They can also unlock fresh opportunities and build the foundation for sustainable success.

In other words, don’t sleep on 8D corrective action problem-solving. Its fact-based, team-centric transformation approach strengthens any organization now and into the future.

SixSigma.us offers both Live Virtual classes as well as Online Self-Paced training. Most option includes access to the same great Master Black Belt instructors that teach our World Class in-person sessions. Sign-up today!

Virtual Classroom Training Programs Self-Paced Online Training Programs

SixSigma.us Accreditation & Affiliations

Monthly Management Tips

• Be the first one to receive the latest updates and information from 6Sigma
• Get curated resources from industry-experts
• Gain an edge with complete guides and other exclusive materials
• Become a part of one of the largest Six Sigma community
• Unlock your path to become a Six Sigma professional

" * " indicates required fields

Learn Quality Management  

SITE-WIDE SALE IS LIVE NOW.  

  CLICK HERE.

• ASQ® CQA Exam
• ASQ® CQE Exam
• ASQ® CSQP Exam
• ASQ® CSSYB Exam
• ASQ® CSSGB Exam
• ASQ® CSSBB Exam
• ASQ® CMQ/OE Exam
• ASQ® CQT Exam
• ASQ® CQPA Exam
• ASQ® CQIA Exam
• 7 Quality Tools
• Quality Gurus
• ISO 9001:2015
• Quality Cost
• Six Sigma Basics
• Risk Management
• Lean Manufacturing
• Design of Experiments
• Quality Acronyms
• Quality Awareness
• Quality Circles
• Acceptance Sampling
• Measurement System
• APQP + PPAP
• GD&T Symbols
• Project Quality (PMP)
• Full List of Quizzes >>
• Reliability Engineering
• Statistics with Excel
• Statistics with Minitab
• Multiple Regression
• Quality Function Deployment
• Benchmarking
• Statistical Process Control
• Quality Talks >> New
• Six Sigma White Belt
• Six Sigma Yellow Belt
• Six Sigma Green Belt
• Six Sigma Black Belt
• Minitab 17 for Six Sigma
• Casio fx-991MS Calculator
• CSSYB/LSSYB Mock Exam
• CSSGB/LSSGB Mock Exam
• CSSBB/LSSBB Mock Exam
• ASQ® CQA Preparation
• ASQ® CQE Preparation
• ASQ® CQPA Preparation
• ASQ® CQIA Preparation
• CQE Mock Exams
• CMQ/OE Mock Exams
• CQA Mock Exams
• CQIA Mock Exams
• CQPA Mock Exam
• CQT Mock Exam
• CQI Mock Exam
• CSQP Mock Exam
• Design of Experiments (DoE)
• Measurement System Analysis
• Statistics Using R
• Data Visualization with R
• Statistics Using Python
• Data Visualization with Python
• Regression with Minitab
• Logistic Regression
• Data Analysis Using Excel
• The Git Mindset
• Statistics Quiz
• Root Cause Analysis
• Kano Analysis
• Lean Management
• QMS Lead Auditor
• Quality Management
• ISO 9001:2015 Transition
• Project Quality Manager
• गुणवत्ता.org
• Summary Sheets
• Practice Tests
• QG Hall of Fame
• Testimonials – ASQ Exams Preparation
• Eight Disciplines (8D) Problem Solving

** Unlock Your Full Potential **

The 8D is a team-based, structured approach to problem-solving. The 8D system aims to identify the root causes of the problem and take necessary actions to resolve the recurring issues permanently.

The US Government standardized the process of Corrective Actions in MIL-STD-1520 (Corrective Action and Disposition of Nonconforming Material). This standard was first issued in 1974, and the last revision was Rec C, issued in 1986 and later cancelled in 1995 without replacement.

This problem-solving approach was later formalized and popularized by Ford Motors.

KEY Takeaways

• The 8D model is a structured approach to problem solving.
• The 8D model provides a framework for systematically identifying problems, evaluating options, and taking corrective actions
• The 8D method is based on the 8 steps of the problem-solving approach.

8D or Eight Disciplines

The eight disciplines are the eight steps of the problem-solving approach. Later, in the 8D method, step D0 was added to the process. These eight steps (and initial step zero) include:

D0 - Preparation and Emergency Response

- Understand, define and quantify symptoms

- Identify the customer and other affected parties

- Protect the customer (band-aid solution) – Use the PDCA approach

- Determine if an 8D approach is needed

D1 - Establish the Team

This is the first step in creating a disciplined approach to developing solutions. It involves establishing a team that will be responsible for resolving the issue. Typically, the team consists of 3 to 7 members. When selecting a team member, selecting individuals with different skill sets and experience is essential. Each individual should bring something unique to the table.

The team members' roles are clarified and defined during this phase, and the ground rules are set up for the team.

D2 - Describe the Problem

In this step, the team describes the problem they are trying to solve. The problem is defined in quantifiable terms. A problem statement is created that defines the scope of the problem.

The problem boundaries are also established. For example, it may be stated as "the problem is limited to the XYZ application."

The affected party reviews the problem description, and any changes are documented.

D3 - Interim Containment Plan

During this step, the team creates a containment plan. These are temporary actions to isolate the customer from the outcome of this problem. The goal of interim containment is to minimize the impact on the customer while the team works on a permanent fix.

The interim containment plan is reviewed with the appropriate departments or functions in the organization.

When developing the containment plan, consideration is given to the following:

- Benefits vs risks

- What can we do to limit the impact?

- How long does the containment need to be effective?

- Is there anything else we need to consider?

D4 - Root Cause Analysis

Root cause analysis is performed to determine why the problem occurred. The team identifies all possible contributing factors that could have caused the problem. They then analyze each factor and assign a probability to how likely it is to have contributed to the problem.

The most common tools for root cause analysis are brainstorming , five whys and the Cause and Effects Diagram .

D5 - Develop Permanent Corrective Actions

After determining what caused the problem, corrective actions are taken to prevent future occurrences. This includes documenting the action(s), assigning responsibility, and implementing them.

There can be multiple root causes for a problem. Also, for every root cause , there could be multiple corrective actions. Hence the corrective actions might need to be prioritized.

D6 - Implement Permanent Corrective Actions

Once the corrective actions are implemented, the team reviews their effectiveness. If necessary, additional corrective actions are added.

Also, at this stage, evaluate containment actions and decide when these can be removed. If the problem does not disappear, reapply containment actions and revise the Corrective Action plan.

D7 - Prevent Future Recurrence

At this point, modify work processes, systems, methods, equipment and practice to prevent similar problems (in the same work area or other areas in the organization).

D8 - Recognize Contributions (Individual and Team)

This final step recognizes the contributions of individuals and teams involved in the process. It is essential to recognize the contribution of those who helped resolve the problem.

Additional Thoughts on the 8D Approach

In my experience, I've found that the 8D approach provides a good framework for dealing with complex issues. However, it's important to remember that it's just one tool among many others. There are many different ways to approach an issue.

For example, you could use the 5 Whys or the Cause and Effects diagram instead of the 8D approach. You could also use a combination of approaches.

If you're working on a small project, you may want to start by using the 5 Whys . But if you're trying to solve a large problem, you may want to use the 8D approach.

You should choose the right tool based on your situation.

Similar Posts:

April 1, 2018

Kano Model by Noriaki Kano

March 14, 2023

National Healthcare Quality Week 2023 | Oct 15 to 21

March 30, 2018

5 Key Philosophies Behind Lean

49 Courses on SALE!

8D Problem solving – 8 Steps, when to use and how to make

Tiago Aparecido Rodrigues Rita

Developed by the Ford Motor Company during the 1960s and 1970s, 8D Problem Solving , is a tool that aims to effectively identify and address recurring problems. (also known as the “8 Disciplines for Problem Solving”) .

It consists of a tool with 8 steps or disciplines to be followed to treat a problem so that it does not occur again.

The tool’s focus is to identify the root cause of the detected problem, plan a short-term fix (including immediate and containment actions) and actually implement a long-term solution (corrective actions) to prevent the problem from happening again in the future.

Over the years, the tool has evolved and in the 90s it gained another “D”: the “D0” that added an initial step in the tool and, as it is a predecessor discipline to the others, the name of the tool remained “8D”.

What all are the disciplines (or steps) of 8D

• D0 – Elaboration of a plan to solve the problem
• D1 – Building a team to work on the problem
• D2 – Description of the problem
• D3 – Development of an provisional plan to contain the problem
• D4 – Identification and elimination of the root cause of the problem
• D5 – Choice of actions and verification of the proposed solution
• D6 – Implementation of a permanent solution
• D7 – Prevention of the reappearance of the problem
• D8 – Celebrating the successful resolution of the problem with the team

When to use the 8D methodology?

8D is a consistent and easy-to-learn tool that, when applied correctly, brings numerous benefits to the organization in addition to effectively and systematically solving a problem that may be affecting the customer and consequently generating waste and inconvenience for both parties.

It is recommended to use 8D in critical situations where the problem is recurrent.

If the problem happens once in a while, or even if it’s just a recurrence of the problem, it’s worth looking at other troubleshooting tools that are simpler and less expensive.

The following are some examples of situations in which 8D is recommended:

• Frequent and recurring customer complaints
• Security or regulatory issues
• Unacceptable test failures
• Recurring waste problems
• Handling of non-conformities

How to make 8D?

Follow the following steps to Make 8D

Fact Finding (Step 0) :

• Assess whether the problem really exists
• Is there a deviation from what it should be?
• Is the customer’s complaint valid?
• Is the claim covered by the product’s warranty, or was it misused?
• Assess who are the people in the company who can contribute to solving the problem (which areas should participate in the discussions?)
• Team Formation
• Problem Description
• Characterize the problem
• Get the first data about the problem (where/when/what?)
• Translate the customer’s language into the company’s language
• Understanding customer dissatisfaction, to bring it to the team
• Immediate Actions / Containment
• Discuss over time what can be done to minimize the effect of the problem
• Take action so that the customer does not continue to receive products with the same problem
• Looking for actions to contain the symptom of the problem (without knowing the cause)
• Find Root Cause of the Problem
• Determine the root cause of the problem (or causes), through the use of auxiliary tools and/or methods ( Ishikawa / 5 Why / FTA / CEP / 5W 2H / etc)
• Confirm of the root cause (or causes): Make sure that the team found the true cause(s) of the problem (Understand the failure mechanism / Seek to simulate the failure)
• Define corrective actions: Look for actions that eliminate the cause(s), through understanding the failure mechanism.

Note : Support Tools or auxiliary tools to find the Root Cause of the Problem •Histogram • Pareto • Tendency Chart • Control Chart – CEP • 5W and 2H • Brainstorming • Affinity Diagram • Cause and Effect Diagram (Ishikawa) • The 5 Whys • FTA – Fault Tree Analysis • Process Mapping ( SIPOC / Flowchart)

• Proof of the Effectiveness of Corrective Actions
• Evaluate each of the actions defined in Step 4, regarding their effectiveness in solving the problem
• Seek to measure the impact of the corrective actions defined in Step 4 , in relation to the resolution of the problem (if it is completely resolved / semi-minimized)
• Perform small-scale tests and evaluate possible side effects.

• Introduction of Corrective Actions
• Definitely adopt the corrective actions that prove to be most effective in Step 5
• Change the way of working / Make changes to the system /Standardizations
• Make the changes official and from the date of implementation only work in this new way
• Monitoring the Effectiveness of Actions
• Remove Containment Actions (Step 3)

• Preventive Actions Against Recidivism Discuss with the team what should be done to:
• Do not allow the failure not to happen in the future (re-incidence)
• Extend as elaborated in Step 6 to similar processes and/or locations that may present the same problem (prevention)
• Transform actions into “best practices”
• FMEA Review
• Lessons Learned / Yokoten
• Presentation of Results and Celebrating the successful resolution of the problem with the team
• Present the actions taken and the results obtained, to the team, to ensure the learning of its members
• Recognize the effort and dedication of the team (involve managers)

8D and PDCA

The 8D follows the PDCA methodology. The table below shows the relationship between each 8D and the stages of the PDCA .

It is important to note that in disciplines from D0 to D5 there are some execution and verification points involved, for example, in discipline D3 , a provisional plan is executed for the immediate containment of the problem and in discipline D5 it is verified whether the proposed solution would be effective in fact. to solve the problem.

However, the execution of the solution that will solve the problem is actually performed only in the D6 discipline as well as the verification and performance in the D7 and D8 disciplines.

Thank you. This is theoretical side of 8D for practical part click here .

Share this:

Interesting article.

8D Methodology – Problem Solving tool

Table of Contents

Disciplined Problem Solving is essential

Hello everyone in this post we learn & explain 8D analysis problem-solving methodology.

Introduction of 8-D Methodology

Today we want to explain the

• Purpose of the eight disciplines for team oriented problem-solving
• Understand the importance and the interactions of each of the disciplines
• Use the 8D methodology for problem solving, and for corrective and preventive action implementation.

We established cause-and-effect relationships , therefore we built hypotheses for improvement and used statistical analyses to verify these improvement ideas. And then finally we established long-term sustainability through process control.

Now, as we said, business success means reducing the variation and centering our critical to quality parameters leading to reduced costs, reduced defects, improved productivity, reduced cycle time, better matching our customer needs, so that which may lead to an increased organisational profit.

In this post, we want to introduce the 8D, which is a problem-solving methodology. So 8D focused on identifying, correcting and preventing a problem. The 8Ds have their origins in the United States military and in the automotive industry. Ford documented the 8D method in the late 1980s. And the method defines eight disciplines or stages, and there’s a new stage added, state zero.

8D is used for handling customer complaints and re-occurring process problems. Once it happens you grab a team, then you need to understand the problem and take containment actions. You need to find the root cause and choose a corrective action, implement the corrective action and then learn a defined prevention for the future before you release and congratulate the team.

what is a problem?

Now, we looked earlier at control charts which proposed by Dr. Shewart, and he talked about two different sources of variability in a process, either common causes or special causes. This type of variation is explain in the post of Statistical Process control.

Common causes is accepted as part of a process. Whereas special cause variability on the other hand produces disturbances in the process and usually increases the variability beyond acceptable levels. And special cause should be then discover and eliminated.

It is important to fix the problem, don’t fix the blame…..!

So as we just said, common cause variability, we would work on improving that with the Six Sigma methodology, going through the DMAIC cycle. But for something that is out of control, a problem, we can use the 8 D problem-solving methodology which we then apply to bring long term stability to our process.

Anything outside of the specifications is a defect. Now, often if we see a special cause, we could have a defect.

So how does this relate to 8D?

Well again, you know with some sort of overlap possibly, the 8D analysis helps bring stability to our process. Okay, then let’s go through the different steps of the 8D problem-solving methodology.

What is 8D?

• 8D is a disciplined process which addresses problem solving in a methodical and analytical way
• Each step of the 8D analysis Process is preceded by letter ‘D’ which stands for discipline.
• The 8D process seeks to define and understand a problem, so that by taking this approach we can continuously improve quality by eliminating the causes of problems and prevent their re-occurrence.
• Each discipline has an input and output
• the output of one step becomes input for next step.

D0- Prepare for problem solving process OR Awareness of problem

Evaluate the need for problem solving process when a symptom / problem is noted

• Does the severity, urgency, size and / or complexity of the symptom exceed the ability of one person to resolve?

Determine if there is a need for an Emergency Response Action to protect an internal or external customer

• Emergency Response Action entails reworking and replacing nonconforming or suspect material(s). In other words, sometimes this may include sorting or reworking on-site.
• The whole idea of an Emergency Response Action is to protect the customer.
• Emergency Response Action is different than an Interim Containment Action (D3)

If I had six hours to cut down a tree, I would spend four hours sharpening the axe”. Abraham Linken

D1- Establish the Team

The first D1 in 8D methodology is team formation.

Select a Champion

• The Champion is a designated member of management who has the authority to sanction the improvements

Select a Team Leader

• The team leader is a spoke person for the team. He ensures that progress is being made, schedules meetings and coordinates the efforts of all the team members

Select Team Members

• CFT can be created at any level of the organization. However, they should be formed as close to the process or problem and its solution as possible
• CFT typically consists of four to seven (4 to 7) members.
• Appropriate specialists can be team members or may be invited to meetings as needed.
• Most of the members are usually those affected by the problems the team is formed to solve.

Generic rules

• Team should establish ground rules
• Finalize the Decision-making criteria / Model How the decision is made

Now, then you want to form a team . Team leader should be someone who has the right expertise to solve the problem, generally the owner of the process or the area where the process occurred. And so, this person is responsible for meeting any requirements and expectations of the organization or from external customers, for example, like how fast the problem should be solved. But here, this is more the expert, the area leader.

8D moderator – not an expert.

And then finally the most important is the team members, these are people that really are the experts assigned to work on the problem with their specific knowledge, and they then need to work. So we’ll have experts, specific knowledge, They need to have the time allocated and the resource allocated so that they can work on the problem, and they need to work within the constructs of the 8D, so that this can be resolved in the proper manner.

D2- Describe the Problem

The purpose of D2 is to describe the internal / external problem by

• Identifying ‘What is wrong with what’
• Detailing the problem in quantifiable terms

Use 5W / 2H Questions

• Who – Identify which customers complaining? / Who is affected?
• What – Identify the problem adequately and accurately.
• When – Timing …When did the problem start?
• Where – Location …where is it occurring?
• How – In what mode or situation first the problem occurs?
• How many – Magnitude …quantify the problem.
• Why – Any known explanations contributing to the problem should be stated.

Above all the questions of 5W-2H, Read more about the 5W 2H by click here .

Conduct “Is / Is Not” Analysis (to bring in more clarity about the problem)

D1- Establish the Team                                                                                 D2- Describe the Problem

D3- Develop the Interim Containment Action

Define and implement interim (containment) actions to isolate the effect of the problem from any internal / external customer until corrective action is implemented

Verify the effectiveness of the containment action, so the quantifiable verification can be provided by

• Check sheets
• Dot Plots and Histograms
• Control Charts
• Paynter Charts

Protect the customer Containment actions are used to buy time. So the principal objective is to protect the customer from experiencing additional problems.

In the Interim containment action, we have identified

1. Whether suspect material is segregate?, quarantine and tagged in the entire supply chain? (Field, warehouse, FG, in process, receipt stores and in transit?

2. Whether details are capture? w.r.t. quantity, cut off numbers, implementation dates

3. Whether specific immediate actions are clearly determine? which may include additional inspection / checks, additional operations etc.

4. Whether details are capture? w.r.t. ion qty., cut off nos., implementation dates etc.

5. Whether documented & clear work instructions are provided for the above containment and immediate actions so that there is no ambiguity while implementation & execution?

6. Whether above is communicate through document? or mail to all concerned and affected parties?

7. Whether adequate supporting data is available? & included in 8D analysis report w.r.t. effectiveness & implementation of interim actions (both containment & immediate)?

8. Whether % effectiveness of each action clearly identified based on fact and team consensus?

D4- Define & Verify Root Cause and Escape Point   

Generate Potential Root Causes

Brainstorm using Cause and Effect Diagrams :

Find out the potential / possible causes using the cause and effect diagram , In addition filter out the all possible causes to very few probable causes. Then next use the cause analysis to find out valid cause for the problem generation and escape cause.

Use Five why for the potential causes to get the system root cause:

After found out the valid cause use the Why-why analysis tool, so that we get the root cause for problem generation and escape.

D5- Choose and verify Permanent Corrective Actions

Implement the corrective action to ensure the root causes have been removed. In other words, verify the permanent corrective action are implemented as intended .

For implementation of corrective action plan out the implementation and setup some matrix to verify long term effectiveness.

D6- Implement and Validate PCA

• Define & implement the appropriate corrective actions
• Choose on-going controls (e.g. Process sheet ) to ensure the root cause is eliminated

D7- Prevent Recurrence

However behind all root causes there are systematic issues. Therefore which need fixed to avoid the recurrence of this cause to avoid the same problem in future. So that goal of prevent recurrence is to change the system that allowed the problem to occur in the first phase

Preventing recurrence

• Notify all personnel of the resolution areas
• Update all relevant documents – Process Flow Diagrams, FMEA , Control Plan, check sheets, etc.
• Update change control records

Look for new opportunities

• Examine – similar processes
• Other locations
• Other parts in part family

Log lessons learnt from this 8D analysis study.

D8- Recognise team & Individual contributor

In this category, we have to ensure

1. Whether lesson learnt is document? and discussed with team?, 2. whether opportunity for horizontal deployment is identify? 3. Whether plan is work out? 4. Whether complete closure for 8D analysis is document for future references? share with other members in the organization, so that learning are effectively utilize. 5. Whether tangible & intangible benefits are calculate? & included in the overall report?

And finally, you’ve got then the release and the signature of the author of the report and the final date of the closure. And once all 8D steps done, then the 8D analysis can be closed.

Related Posts

Cost of Quality | Quality engineer essential guide

Total Quality Management (TQM) Fundamentals

SIPOC – The complete guide

Root cause analysis

7 Management and Planning Tools

CAPA | Corrective Action & Preventive Action

The 8D method: easy and effective problem-solving as a team

The 8D method

Do you want to improve your management, or more specifically your problem-solving processes? With the 8D template, you can learn how to react quickly to a problem, and prevent it from recurring in the future. Follow the eight steps of the 8D process, and you will easily find the most suitable long-term solutions to your problems!

The 8D method: eight steps to find and implement long-term solutions to a problem

Are you looking for an effective problem-solving method? The 8D template uses eight disciplines or specific steps to help teams find suitable long-term responses to a problem. So this is just what you need!

This template comes from the Japanese management approach known as Kaizen , a continuous improvement process based on simple and inexpensive concrete actions. It’s all about working as a team to make small improvements every day .

Follow the 8D method to involve all the teams affected by the problem, and find the appropriate solutions. This way, you promote continuous improvement to eradicate any problems identified in a process or a project:

• Create the working group
• Define the problem
• Fix it in the short term
• Identify its root causes
• Assess the solutions
• Measure the effectiveness of corrective actions
• Standardize improvement actions 
• Congratulate the team

What are the benefits of the 8D process?

On a day-to-day basis, team management often makes you choose to not fix small recurring irritants, as long as they don't bring a project to a standstill. However, it’s by addressing these small problems that you will see your productivity, efficiency and long-term project management improve greatly from one day to the next!

Whether you manage one or more teams, working at different times and in different places, the 8D tool can be used in person or even for remote working thanks to the Board , Klaxoon’s whiteboard. This shared space that can be accessed at any time, and on any connected device, helps you to quickly react to a problem in your business. You no longer need to postpone projects or team meetings because setting up a problem-solving process could take too long and slow down your business.

What’s more, with the 8D method you can analyze every aspect of a problem and eradicate it permanently , thanks to the last step, “Standardizing Solutions”. This will save you a lot of time for the rest of your project. Finally, it’s the ideal method to work with because it applies to all types of problems , whatever your project.

How to follow the 8D method with Klaxoon

1. create the working group.

Start by inviting your team to your whiteboard, then create your working group. Everyone has to send their photo in an idea, and add their name as a Dimension .

2. Define the problem

Once you’ve done the first step, you have to correctly define your problem . To do this, use the 5W1H method to ask yourself the right questions: 

3. Correct problems in the short term

Next, you need to define together the solutions that you can implement immediately . Ask all the participants to send their ideas to control the situation as quickly as possible in the D3 area. You’ll get a lot of ideas, so ask everyone to like their two favorites, i.e., the ones they think are the easiest to implement and will have the best impact . Finally, apply the one that gets the most likes in the end.

4. Identify the root causes

Now, tackle longer-term solutions that are slower to implement . To do this, go to step 4 of the 8D process, to identify the root causes of the problem: ask yourself “Why?” five times or more, to deep dive into your problem. Here, you can also use Klaxoon's dedicated 5 Whys template to help you. 

This step is essential to ensure the long-term solutions to be implemented are set up correctly.

5. Define permanent corrective actions

Once the root cause is discovered, collectively propose long-term solutions in D5 . Use the Dimensions to add two key pieces of information: 

• The name(s) of the action owners
• An implementation date for the solution

The first part of the method ends here: at this stage, everyone knows what they have to do and when it needs to be done .

6. Measure the effectiveness of permanent corrective actions

Once the corrective actions have been implemented, bring the team back to this Board after a certain time, for the second part of the method. Copy the actions previously defined in D6, and then launch a Yes/No Poll Question to assess the effectiveness of these actions. 

An example of question could be: “Did the action that you implemented solve the problem?” This way, you identify the solutions that you want to keep in the long term , and the ones to modify or abandon.

You can also do this step asynchronously . Contact the participants before the meeting, and ask them to answer the Question and add explanations in comments. So when your meeting starts, you avoid a tedious round table and you’re all set to process the information and act as a team.

7. Standardize improvement actions

This is a crucial step of the 8D method. Now that the effectiveness of the solutions has been assessed, what you have to do in D7 is propose ideas for deploying your long-term solutions on a large scale , for other products or in other teams. Keep in mind that the goal is for the problem never to recur again.

8. Congratulate the group

This step should not to be overlooked! Use D8 to congratulate the team on your progress and your results , and take the opportunity to summarize your improvements and share any photos of the results!

You too can adopt Klaxoon!

With Templates, innovate in the management of your projects, represent them visually and move forward as a team in a synchronized manner

Get inspired by other templates from the same categories

Learning Assessment

Elevate learning outcomes with this Learning Assessment Quiz template.

Remember the future

Travel through time as a team to launch a project with no hassle.

The A3 report

Summarizing issues and finding solutions as a team in 8 stages

Unlock your teamwork potential

8D Problem-Solving: Common Mistakes to Avoid

Author: Daniel Croft

Daniel Croft is an experienced continuous improvement manager with a Lean Six Sigma Black Belt and a Bachelor's degree in Business Management. With more than ten years of experience applying his skills across various industries, Daniel specializes in optimizing processes and improving efficiency. His approach combines practical experience with a deep understanding of business fundamentals to drive meaningful change.

In today’s competitive business landscape, effective problem-solving is the cornerstone of organizational success. The 8D Problem-Solving methodology offers a structured, team-based approach to tackle challenges head-on. Yet, while many rush to employ its eight disciplines, few navigate its intricacies without stumbling. Whether you’re a seasoned professional or new to the 8D realm, recognizing and sidestepping common mistakes is pivotal. In this article, we unveil the most frequent blunders that teams unwittingly commit, providing insights to enhance your problem-solving prowess. Dive in to discover these pitfalls and ensure your 8D approach is both efficient and impactful.

The 8D method is a popular way teams solve problems step-by-step. It’s like a roadmap that helps teams figure out what went wrong and how to fix it for good. Many businesses love using it because it’s organized and gets results. But, like anything, there are some common mistakes people make when using this method. In this article, we’ll talk about those mistakes and give tips on how to avoid them. By the end, you’ll know how to use the 8D method even better and make sure your team gets the best results.

1. Skipping Steps

Background:.

The 8D problem-solving process is designed as a step-by-step approach to ensure that teams address problems comprehensively and systematically. Each step plays a crucial role in understanding, diagnosing, and resolving the issue at hand.

One common pitfall is the temptation to skip or rush through certain steps. This often occurs because teams believe they have a grasp of the problem based on preliminary observations or past experiences. Especially in the initial stages—where defining and describing the problem is crucial—this oversight can result in a superficial understanding, leading to ineffective or misaligned solutions.

By not giving each step its due diligence, teams risk:

• Misdiagnosing the real issue
• Implementing solutions that don’t address the root cause
• Wasting resources on ineffective strategies

How to Avoid:

To counteract this, it’s vital to treat each step with equal importance, resisting the urge to jump ahead. A thorough understanding of the problem, achieved by diligently following each step, lays the foundation for effective solutions. Regular checkpoints can also be established to ensure that each step has been comprehensively addressed before progressing.

Free Lean Six Sigma Templates

Improve your Lean Six Sigma projects with our free templates. They're designed to make implementation and management easier, helping you achieve better results.

2. Not Forming a Diverse Team

The essence of the 8D problem-solving approach is collaborative teamwork. The collective insights, experiences, and skills of a team often lead to more innovative and effective solutions than individual efforts.

A frequent oversight is forming teams where members have similar backgrounds, experiences, or perspectives. Such homogeneity can lead to a narrow viewpoint, where potential solutions or root causes might be overlooked.

A homogeneous team can result in:

• Limited creativity and innovation
• Overlooking potential solutions or root causes
• Confirmation bias, where members validate each other’s perspectives without critical evaluation

To ensure a holistic understanding of the problem and a diverse range of solution options, teams should be multidisciplinary. This means including members from various departments, roles, and, if necessary, external stakeholders. Such diversity brings a plethora of perspectives, fostering rich discussions, challenging established norms, and ensuring that the problem is viewed from all possible angles.

3. Failing to Document Everything

Documentation is the backbone of a structured problem-solving process like 8D. It provides a tangible trail of the team’s journey, from problem identification to solution implementation.

Teams often become so engrossed in discussions, brainstorming sessions, and solution implementation that they forget or deemphasize the importance of documentation. This oversight can stem from a belief that the issue at hand is straightforward or that team members will remember crucial details.

Neglecting documentation can lead to:

• Loss of vital information, especially if team members change or are unavailable.
• Inconsistencies in understanding or approach, as verbal discussions may be interpreted differently by different members.
• Difficulty in tracking progress or revisiting decisions when needed.
• Challenges in replicating the solution process for similar problems in the future.

To ensure thoroughness and continuity, teams should maintain detailed records at every stage. This includes documenting:

• Problem descriptions
• Data gathered
• Analysis results
• Discussions and brainstorming sessions
• Decisions made and their rationale
• Implemented solutions and their outcomes

Using collaborative tools or platforms can help streamline this process and provide a centralized repository accessible to all team members.

4. Not Validating Root Causes

Identifying the root cause of a problem is pivotal in the 8D approach. It ensures that solutions address the underlying issue, not just the symptoms.

In their eagerness to resolve the problem, teams sometimes latch onto the first plausible cause they identify. This premature conclusion can stem from confirmation bias, where individuals seek out information that confirms their existing beliefs.

Settling on an unvalidated cause can result in:

• Implementing solutions that don’t address the real issue.
• Recurrence of the problem, leading to increased costs and wasted resources.
• Frustration and reduced morale, as teams feel they are repeatedly addressing the same issues.

Teams should employ a rigorous validation process for identified root causes. This can involve:

• Asking “Why?” repeatedly (typically five times) to drill down into the underlying cause—a technique known as the “ 5 Whys .”
• Using structured analytical tools like Fishbone diagram s (also known as Ishikawa or Cause and Effect diagrams) to explore all potential causes in a systematic manner.
• Testing the hypothesized root cause in real-world scenarios to see if addressing it resolves the problem.

5. Implementing Quick Fixes

In the face of pressing problems, there’s often a natural inclination to find the quickest way to alleviate the immediate pain or visible symptoms. This can lead to teams opting for “band-aid” solutions or quick fixes.

Choosing the path of least resistance or the fastest remedy often means addressing only the surface-level symptoms of a problem, rather than its root cause. This approach can be driven by time constraints, pressure from stakeholders, or a desire for immediate relief.

Relying on quick fixes can lead to:

• Recurrence of the problem, as the underlying cause remains unaddressed.
• Wasting resources on repetitive, short-term solutions.
• Eroding trust and confidence, as stakeholders see the same issues resurface.

To sidestep the pitfalls of quick fixes:

• Prioritize solutions that address the root cause of the problem, even if they take longer to implement.
• Educate stakeholders on the importance of sustainable solutions, emphasizing the long-term benefits over short-term relief.
• Allocate adequate time and resources for comprehensive problem-solving, recognizing that a deeper fix now can prevent repeated issues in the future.

6. Failing to Monitor the Effectiveness of Corrective Actions

The journey of problem-solving doesn’t end with the implementation of a solution. Continuous monitoring is essential to ensure that corrective actions deliver the desired results.

Once a solution is in place, teams might move on to other tasks, assuming that the problem is resolved for good. This complacency can stem from a belief that the implemented solution is foolproof or from a lack of resources dedicated to monitoring.

Not monitoring the effectiveness of corrective actions can result in:

• Unnoticed failures or inefficiencies in the implemented solution.
• Missed opportunities for improvement or optimization.
• Stakeholder dissatisfaction if the problem resurfaces or new issues emerge.

To ensure that corrective actions remain effective:

• Set up regular review intervals to assess the performance of the implemented solution.
• Define clear metrics or KPIs to objectively measure the success of the corrective actions.
• Foster a culture of continuous improvement, where teams are encouraged to iterate and refine solutions based on real-world feedback.
• Ensure open channels of communication with stakeholders to gather feedback and address any emerging concerns promptly.

7. Not Preventing Recurrence

Solving a problem doesn’t only involve addressing its current manifestation but also entails preventing its reoccurrence. This proactive approach ensures long-term success and stability.

Teams might focus so intently on resolving the immediate issue that they neglect to consider its potential to resurface. This oversight can be due to time constraints, a lack of comprehensive analysis, or simply underestimating the problem’s complexity.

Failing to prevent recurrence can lead to:

• Repeatedly addressing the same issues, leading to wasted time and resources.
• Erosion of stakeholder confidence as the problem keeps reappearing.
• Additional costs and disruptions associated with recurrent problems.

To ensure problems don’t keep reoccurring:

• Conduct a thorough post-mortem analysis to understand the factors that contributed to the problem’s occurrence.
• Identify and address any systemic vulnerabilities or gaps that might allow the problem to resurface.
• Implement preventive measures, which could include training, system upgrades, or process changes.
• Regularly review and update these measures based on new insights or changing circumstances.

8. Forgetting to Recognize the Team’s Efforts

Behind every problem-solving endeavor is a team of dedicated individuals working collaboratively. Recognizing their efforts is not only a sign of gratitude but also an essential component of team dynamics and motivation.

In the rush to move on to the next task or project, teams might forget to pause and acknowledge the hard work that went into solving the problem. This oversight can be unintentional, but its impact on team morale can be significant.

Not recognizing the team’s efforts can result in:

• Diminished motivation and engagement among team members.
• A feeling of being undervalued or overlooked, which can hamper future collaboration.
• Reduced willingness to go the extra mile in future projects or tasks.

To ensure teams feel valued and motivated:

• Set aside time at the end of a project or task for reflection and acknowledgment.
• Celebrate successes, no matter how small, through team gatherings, awards, or simple words of appreciation.
• Foster a culture where team members regularly acknowledge and praise each other’s contributions.
• Encourage feedback and provide opportunities for team members to share their experiences and learnings.

In problem-solving, the 8D methodology stands out for its structured and comprehensive approach. However, even within such a robust framework, pitfalls await the unwary. From the temptation of quick fixes to the oversight of not preventing recurrence, these challenges can undermine the effectiveness of solutions. Moreover, the human element—recognizing and valuing the team’s contributions—is just as pivotal as the technical steps. To truly harness the power of 8D, it’s essential to be cognizant of these common mistakes and proactively work to sidestep them. By doing so, teams not only address current issues effectively but also lay the foundation for sustainable success and continuous improvement in their organizations.

• Zarghami, A. and Benbow, D.W., 2017.  Introduction to 8D problem solving . Quality Press.
• Camarillo, A., Ríos, J. and Althoff, K.D., 2017.  CBR and PLM applied to diagnosis and technical support during problem solving in the Continuous Improvement Process of manufacturing plants .  Procedia Manufacturing ,  13 , pp.987-994.

Was this helpful?

Daniel Croft

Daniel Croft is a seasoned continuous improvement manager with a Black Belt in Lean Six Sigma. With over 10 years of real-world application experience across diverse sectors, Daniel has a passion for optimizing processes and fostering a culture of efficiency. He's not just a practitioner but also an avid learner, constantly seeking to expand his knowledge. Outside of his professional life, Daniel has a keen Investing, statistics and knowledge-sharing, which led him to create the website www.learnleansigma.com, a platform dedicated to Lean Six Sigma and process improvement insights.

5S Floor Marking Best Practices

What is Monte Carlo Simulation? [Explained with Example]

In lean manufacturing, the 5S System is a foundational tool, involving the steps: Sort, Set…

How to Measure the ROI of Continuous Improvement Initiatives

When it comes to business, knowing the value you’re getting for your money is crucial,…

In today’s competitive business landscape, effective problem-solving is the cornerstone of organizational success. The 8D…

The Evolution of 8D Problem-Solving: From Basics to Excellence

In a world where efficiency and effectiveness are more than just buzzwords, the need for…

8D: Tools and Techniques

Are you grappling with recurring problems in your organization and searching for a structured way…

How to Select the Right Lean Six Sigma Projects: A Comprehensive Guide

Going on a Lean Six Sigma journey is an invigorating experience filled with opportunities for…