thesis template ukm

Journey to The End

Saturday 11 april 2015.

• Template Gaya UKM (UKM Style)

Download Template of UKM Style for Microsoft Word

Writing Chapter using Template

Generate a Table of Content

29 comments:

thank you :) how about the reference/citation?

You mean format of reference header? Same concept as other chapter. Use Heading 1, then enter, then type "REFERENCE" with title style.

hi, Does this means that all the chapters can be written in one document? since before this I make 1 document for only one chapter ==. if it is, this will make my life way easier.

hai, thank you for the helpfull tips. Does this mean that i can write the whole chapters in one document? since before this i have to write one chapter for one document

That is very true. Yes, you can write the whole thesis in 1 file. I am doing it. However, I only use Heading 1 and so on, for Chapters, references and appendix (with little bit of modification). In a thesis, you have to write cover page, acknowledgement, etc. Those pages are written manually. Well, this is my way. I'm welcomed if you have other option.

hi there, thanks for the feedback. just wanted to share. I've tried using the your methods in my writing and so far it is way better than my methods. way more organised. i didn't have to open and close too many documents since i only use one doc for the whole chapters. thank you so much. really appreciate it XD.

about TOC, I've already select 'none' for tab leader but after clicking OK, the '.....' tab leader still appear. do you have a solution for this problem?

TOC is a bit tricky. Each point of TOC (for example Chapter II, 2.1, 2.1.1) follows different style. Assuming you generate TOC automatically. - Chapter I, Chapter II, so on, follow style of "TOC 1" - 2.1, 2.2, so on, follow style of "TOC 2" - 2.1.1, 2.1.2, so on, follow style of "TOC 3" So, for example if you want to remove the dots of 2.1, you have to modify style "TOC 2". To modify, you have to open the Styles list. There is a small arrow right bottom of Styles, click it. Then go to "TOC 2", right click, choose modify. Choose Format, then Tabs. Then choose the second tab, select none as the leader. It is a bit complicated, hopefully you can understand.

I'm still trying to use this template, 1) For reference, when I use it as usual, in the table, it automatically written as Chapter...so what I did, i retype it manually. Is this wrong? 2) How to put the table name? 3) Why my subtitle not at the center, is it because i use Microsoft 2007? 4) How to add manually for declaration, abstract, etc.? ..because it is not clickable to add another row for sentence Sorry for bothering you. Thank you.

1. If you mean reference header, yes you use heading 1 style and yes it will be written as Chapter in the navigation pane (document map if you use Word 2007). For TOC, you have to change "Chapter.." to "References" manually. Be careful that you dont disrupt the TOC format. 2. Did you mean table title? Go to References ribbon, Insert caption, choose table as label, go to Numbering, choose 1,2,3 format, tick include chapter number. Then the table number is generated automatically. You can add the title as you like. 3. I am not sure why subtitle is not at the center. You can check the subtitle style. Right click the subtitle style, modify, and make sure the center format is active. 4. Did you mean adding them in TOC? You cant really add in the generated TOC, you have to provide blank space before the TOC. You manually write them, before the TOC. Hope this helps.

Sorry for my broken english. Thank you for helping me. One more question. I'm referring to panduan penulisan tesis. This template format is quite different for TOC How can I edit it? For example.. CHAPTER 1 INTRODUCTION 1.1 Background of Study 2 1.2 Problem Statement 2 Thank you.

You are right, for TOC, you need to modify it (later I will modify this guide so that you all can modify the TOC easier). For now, I'll tell you how to modify it. 1. When you use Heading 1 style. write chapter title also. Although you can't see it (because it is in white color), but it will be shown in the navigation pane and in the TOC. What I mean is that, don't leave it blank as I told you in the guide, but write the title, for example: "INTRODUCTION". 2. Go to your generated TOC (assuming you have created it), update field, update entire table. Then you will see: CHAPTER 1 INTRODUCTION. 3. In the TOC, change the "1" to "I" as followed in UKM Style (Gaya UKM). Done. As I mentioned before, TOC is a bit tricky, but it is better than manually writing everything :)

Thank you. Already done it :) Except, same question as faten fufoo, dots for TOC2 and TOC3 cannot be remove. Even though i tried to set it as none. Only successful for TOC1.

There are few tab stop positions. Make sure you choose the last tab stop (you can click the number in the list dialog). The purpose of the last tab stop is to position the page number. The last tab stop supposedly is 14.5 cm (or around that value) and the last tab stop's alignment is right. Then set the Leader to none.

Alhamdulillah. Already done it. Thank you so much :)

how to make the start page number 1 from the chapter 1 and not from contents?

You have to use Section Break before every chapters. In TOC pages, you use page numbers i, ii, so on. Then use Section Break after you finish writing TOC. On chapter pages, you change the format of page numbers 1,2,3, so on and make sure it starts from 1. Try to Google about section break if you still dont understand.

i am so sorry, can you help me for numbering the pages? thank you.

Assuming your last page before chapter is List of Figure. So, at the end of list of Figure, add section break (Next page). Then on the next page, insert page number. Go to the Page number format, start from 1 (instead of continue from previous section). Tick also "Different on first page". If you still cant understand, Mr Google always ready to help.

Thank you so much. Really appreciate your afford to assist others

Assalam Tuan, Do you provide ready made template, for Bahasa melayu version? Thanks

Yes. You can download the BM version (check the first step). Inform me if the template is missing something. Well..the template is not perfect as I replied other comments. I still don't have time to fix it. But you can modify accordingly.

Thank you so much. Your assistance is so useful for me. Wish u all the best and success.

Dear dps and everyone accessing here for gaya ukm, Thank you very much for providing template for gaya ukm. My thesis is almost done, now I am copying and pasting it in the template provided here. Following your instruction I left a page blank for generating TOC. When I generated TOC after copying my entire Chapter 1, the page number was ok, but when I have manually inserted the preceding pages (title page, acknowledgement, abstract etc.) , I see English numbers for all these pages. As we know according to gaya we have to use roman number for the first few pages, can I change them into roman numbers? I will highly appreciate any help in this regard.

Hi Somebody, Correction on my first step, use Section Break instead of Page Break. So, before chapter page, insert Section break - next page. Insert page number on the pages before chapters, format it to roman. On chapter page, format the page number to numeric and start from 1, also check 'different on first page'. Hope this helps. As an alternative, this year UKM has released their official template which is quite accurate. Just that they did not provide guide how to use it.

Thank you very much for taking time to reply. Yes, there is the ukm official template available, regrettably without guidelines. I have found your step by step guidelines very useful. I have finished copying my thesis in your template until chapter 3. I would highly appreciate if you could to tell me how I can insert tables in your template which are compatible to gaya ukm? Though in my previously prepared thesis (five files for five chapters and individual files for references and appendices) I prepared the tables compatible to gaya ukm, when I tried to copy these tables in your template, they become very awkward and I even cannot edit them in my effort to make them compatible to gaya ukm. However, if you could inform step by step procedures of how one can add tables, references and appendices in your template and modify the template to make it compatible to gaya ukm, many ukm students like me will be benefited and will remain thankful to you. Finally, I really appreciate your voluntary service for the student community of ukm.

Hi, To answer your question, I need to write a long guide. Currently I am busy. So, what I can do is give you rough idea. 1. Add table. Table is drawn as normal table. However, the issue is the caption of table (or figure). Caption is the table number and its title. Word can automatically generate the table number (if you have properly set the heading). I found the guide of setting caption in: https://support.office.com/en-us/article/Add-format-or-delete-captions-in-Word-82fa82a4-f0f3-438f-a422-34bb5cef9c81?ui=en-US&rs=en-US&ad=US 2. References. I trick my template by treating references or appendices as Chapter. So, create a chapter with title: References. Which means, write "References" as Heading 1 and Title. 3. Appendices. Same as References. You are welcomed.

Hi dps, I have used your template not the official one as it does not have step by step guidelines like yours. May I request you to inform how to add references and appendices in your template which will be automatically generated in the navigation pane as well as in TOC. Thanks in advance.

Hi, I answered in the previous comment.

Popular Posts

• Microsoft word
• table of content
• template gaya ukm

Blog Archive

Bengkel Format Tesis Template Gaya UKM Siri 1 2024

https://bit.ly/PendaftaranTesisGayaUKM2024

Tarikh Acara: Pada 11 March 2024

Tarikh Acara: Dari 09:00 Pagi hingga 01:00 Tengah hari

Tempat : Bilik Latihan Zainal Azman Rajuddin, Aras 2 PTSL

Penganjur Bersama: Unit Pendidikan Pelanggan PTSL

• Lampiran 1.jpg

Managing Thesis Effectively using MS Word: Gaya UKM Template

The UKM Graduate Centre Workshop Series 33/2019: "Managing Thesis Effectively using MS Word: Gaya UKM Template" was organized by UKM Graduate Centre, UKM. The details of the event:

20 November 2019 9.00 am - 5.00pm Training Room, The Graduate Centre, UKM Trainer: Dr. Haroon Rashid Information on fees, synopsis and registration, please click http://bit.ly/WS33_2019

  Date and Time

  location,   hosts,   registration.

• Date: 20 Nov 2019
• Time: 09:00 AM to 05:00 PM
• All times are (UTC+08:00) Kuala Lumpur

• Training Room
• UKM Graduate Centre
• Bangi, Selangor
• Malaysia 43600

• Contact Event Host
• Co-sponsored by UKM Graduate Centre

  Speakers

Dr. haroon rashid of university of malaya.

Dr. Haroon Rashid is an engineer, researcher, lecturer and trainer. Currently, he is attached with Photonics Research Centre (An HICoE - Higher Institution Centre of Excellence) of University of Malaya as Research Fellow. He completed his postgraduate studies with PhD in Electrical, Electronic and Systems Engineering from Universiti Kebangsaan Malaysia (UKM) - Malaysia, M.Sc. in Microelectronics Engineering from Universiti Kebangsaan Malaysia (UKM) - Malaysia, B.Eng. (Honours) in Electrical and Electronic Engineering from University of Sunderland (UOS) - United Kingdom and B.Sc. in Mathematics from the University of Punjab - Pakistan. He has worked with various highly reputed organizations and institutions of higher learning locally and abroad.

He is an active member and volunteer of Institute of Electrical and Electronics Engineers (IEEE) - USA, Institution of Engineering and Technology (IET) - United Kingdom and National Academy of Young Scientists (NAYS) - Pakistan. He is the Chair (Educational Activities) of IEEE Young Professionals Malaysia, Vice Chair of IEEE Consultants Network Malaysia, Founding Leader of IEEE Malaysia Section Blockchain Group and Executive Committee of IEEE Professional Activities Committee of Engineers (PACE), Malaysia. He has been a mentor of various undergraduate and postgraduate students. He has given several talks and trainings on different topics at various organizations as invited speaker. His current research interests are in the areas of novel 2D-TMD materials for optoelectronic applications, thin films fabrication and characterization, solar photovoltaic, nanotechnology, renewable energy applications, photonic devices, VLSI and IC fabrication.

  Media

Templates — Universiti Kebangsaan Malaysia

Templates tagged Universiti Kebangsaan Malaysia

Show all Templates

Related Tags

Get in touch.

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

Email: 

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

Thesis Template-UKM style

Related Papers

HAYMANOT TAKELE

Integration of Distributed Generation (DG) generates problems for the protection of Distribution Networks (DNs) in power systems. When DG is integrated into a power distribution system (DS), the radial nature of the network is altered and the power starts to flow in a reverse direction. In addition to the reverse flow of power, the DG upsurges the fault current level and affects the existing time intermission coordination of the protective overcurrent relay. This study proposes a reverse power relay (RPR) and Fault Current Limiter (FCL) to mitigate the fault current level and reverse power flow in a Distribution Network (DN) by the use of DG. The FCL works only as a unidirectional fault current limiter (UFCL) by restricting the flow of fault current that occurs in the main grid (MG) of the DG. However, FCLs can protect the flow of fault currents from the MG by affecting the operational flexibility and reliability of the DG. To overcome the flow of fault current of the DG, this study proposes RPR to monitor the power flow to the DG. Collectively the study focuses on the protection of radial DS by using RPR and UFCL. The analysis and the modeling were conducted on the 15KV DN of the radial feeder in Debre Markos DN. The 3Φ fault analysis (which is more severe than others) was performed to validate the protection capability of the mitigation techniques which were proposed in this study.

Journal of Computer Science IJCSIS

The integration of Distributed Generation (DG) into the distribution system is considered as an achievement made in the field of power system. With such penetration of DG requires assessment of protection schemes used in traditional distribution system. Short circuit studies are needed to be performed for determining an adequate protection scheme for such an integrated distribution system. This paper presents short circuit analysis of 132 KV Dargai Grid Station (GS) Pakistan incompliance to IEC 60909.The Distribution system is modeled in Electrical Transients and Analysis Program (ETAP) software and comparative fault analysis has been performed with and without DG. The fault location is made fixed while DG location is varied. It is found that there is significant increase in fault current with the DG Penetration and the fault current depends upon total feeder length, distance of fault location from the DG and Grid and extent of flowing current.

Indonesian Journal of Electrical Engineering and Computer Science

Faissal ELMARIAMI

In the whole world and especially in Morocco, the electric power sector faces significant challenges and the demand for energy is increasing as fossil fuel sources are disappearing. Moreover, the high cost of construction of large production plants and the obligation to reduce greenhouse gas emissions are among the factors pushing the energy sector to integrate distributed generators DGs based on renewable energies into power grids. However, the integration of these generators increased the values of short-circuit currents in the network, which poses a real threat to the existing protection coordination systems in the distribution network. The aim of this article is to bring together in a single platform all available research addressing the issue of protection coordination in the presence of DGs in the distribution network, in order to help researchers identify future scope. This paper presents a review of the impact of distributed generators on the protection coordination of distr...

Energy Procedia

Mohammad Abroshan

Ebadollah Kamyab

Conventional power distribution system is radial in nature, characterized by a single source feeding a network of downstream feeders. Protection scheme for distribution system, primarily consisting of fuses and reclosures and, in some cases, relays, has traditionally been designed assuming the system to be radial. In last year extra attention applied in use of distributed generator units in distribution networks. The integration of distributed sources into existing networks brings up several technical, economical and regulatory questions. The connection of distributed generators (DG) to distribution networks also influences the performance of the networks and the impact depends on the number, location and size of injected DG. The presence of distributed generators in the distribution network can cause the mis-coordination of the protection system. In order to overcome this problem, one can change the relay setting based on the number and location of DGs in the network. In this paper...

Engineering, Technology & Applied Science Research

Krishan Khatri

The rapid increase of the electrical power demand gave rise to many challenging situations for power system control engineers as the transmission lines are operating at their maximum capacity in most developing economies. To solve this, Distributed Generation (DG), i.e. the generation of electrical power in a distribution network that provides clean energy, is gaining popularity. There are several challenges the protection of distribution networks faces after DG installation, such as variations in short circuit levels, protection blinding, reverse power flow, protection coordination, change in fault impedance, recloser-fuse coordination, selectivity, unsynchronized reclosing, false tripping, etc. In this paper, an IEEE 13-Bus System Radial Distribution System is simulated using Electrical Transient Analyzer Program (ETAP), various scenarios of DG placement are considered, their impact on the protection system is analyzed, and different techniques are proposed to minimize the effect ...

Research Square (Research Square)

2015 IEEE 28th Canadian Conference on Electrical and Computer Engineering (CCECE)

Paul makanga koumba

Protection and Control of Modern Power Systems

manohar singh

Loading Preview

Sorry, preview is currently unavailable. You can download the paper by clicking the button above.

RELATED PAPERS

Gustavo Ramos

Jorge W . Pastuña

Nahil Shaker

Khalil El-arroudi , Abdelsalam Elhaffar

International Journal of Mechanical Engineering and Robotics Research

Lukasz Staszewski

IET Generation, Transmission & Distribution

Matin Meskin

Mario A Rios

komang yuliani

International …

Marjan Mohammadjafari

International Journal of …

Hadi Zayandehroodi هادی زاینده رودی

… in Power System Protection, …

farshid yazdi

Electric Power Components and Systems

2021 3rd International Conference on High Voltage Engineering and Power Systems (ICHVEPS)

Nanang Hariyanto

D Rahul Roy

Almoataz Abdelaziz

Fernando Guarda

Fahd Hariri

Ashwini Udgave

Advances in Science, Technology and Engineering Systems Journal

Owolabi Bango

Vijetha Killamsetti

IEEE Access

Muhammad Usama , Mahmoud Moghavvemi , Hazlie Mokhlis , Nurulafiqah Nadzirah Mansor

N. Hatziargyriou , Vasileios Papaspiliotopoulos , George Korres

RELATED TOPICS

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

• UKM Learning and Research Repository

Welcome to UKM Learning and Research Repository This repository provides access to digital library materials such as full text content of theses, past year exam papers, selected government publications, law documents (act, bill, enactment), newspaper articles, conference papers, special collection (manuscript, classic and rare book), UKM publication books and others.

Recent Submissions

The reign of King Chulalongkorn (1868-1910) saw such vital changes in the social and political system of the country that, looking back, trends of political development of later times appear to have been conditioned largely by new concepts introduced during this period. King Chulalongkorn's position no less than his character and training enabled him to bridge the gap between old and new ideas, to link the older and the new generations in Thailand of his time. The remarkable thing abou...

The maps, plans and charts in the P.R.O. described in this catalogue amount to rather more than three hundred and fifty. They are here arranged in two groups: 1. Those maps which appear in the printed list made in 1910 of maps then in the Library of the Colonial Office. Such maps up to 1885 were transferred to the Public Record Office before the last World War. For the present catalogue, this list has simply been reproduced. It shows some fifty maps, plans and charts relating to Southeas...

This paper is a preliminary study of the origin, growth and development of the Japanese mercentile community in Manila - a subject that has full of possibilities - but the details and qualifications of some of the general observations must await further extensive research. The long period of enforced Japanese isolation completely cut off the commercial and diplomatic relations between Tokugawa Japan and the Philippines. Whatever trading concessions and mercantile interests the pre-Tokuga...

I would like to state more absolutely that the contents of this paper are entirely subjective and considered from the point of view of the teacher rather than the pupil. Many of the conclusions arrived at are based on my own teaching experience which covers a period of three and a half years and confined to one school. I have, however, had occasions to discuss general problems with teachers from other schools and I have also paid close attention to the achievements of pupils in other s...

The trouble with Paul Clayton Worthington was that he was always looking for trouble. In the first place, he was a non-conform- ist. He wore shoes, but no socks. The flame of patriotism burnt low in his breast. When, as fairly regularly happened, he received his draft papers, calling him up for military service with the U.S. Army, he would telephone the authorities and tell them, in a con- fidential voice, that he had it on unimpeachable authority that Paul Clayton Worthington was a fe...

Communities

Choose a community to browse its collections.

Exam Papers / Kertas Soalan Peperiksaan 8691

Government of malaysia publications / terbitan kerajaan malaysia 294, journal article / artikel jurnal 84792, law / undang-undang 12026, master thesis / tesis master 7743, newspaper article / artikel surat khabar 57007, phd thesis / tesis phd 5083, research data / data penyelidikan 18, seminar papers/ proceedings / kertas kerja seminar/ prosiding 23841, special collections / koleksi khas 1882, ukm corporate memory / memori korporat ukm 3494, ukm publication books / buku penerbit ukm 168.

• 553 Salbiah Ani
• 464 Noor Azlan Ghazali
• 436 Zulkifli Salleh
• 409 Halina Mohd Noor
• 397 Hafizah Iszahanid
• 391 Rahman Shaari
• 388 Siti Haliza Yusop
• 380 Teo Kok Seong (UKM)
• 7102 Sajak Melayu -- Malaysia
• 5401 Dissertations, Academic -- Malaysia
• 5033 Sajak Melayu Malaysia
• 4990 Universiti Kebangsaan Malaysia --...
• 3194 Cerpen Melayu Malaysia
• 1501 Bahasa Melayu
• 1474 Malaysia
• 1112 Buku -- Ulasan
• 995 Covid-19
• 62378 2000 - 2024
• 17756 1900 - 1999
• 189 1800 - 1899
• 11 1700 - 1799
• 3 1600 - 1699
• 1 1300 - 1399
• 1 1200 - 1299
• 1 1197 - 1199
• 132728 false