how to make table of contents in thesis

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on 15 May 2022 by Tegan George .

The table of contents is where you list the chapters and major sections of your thesis, dissertation, or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction. The maximum length should be two pages. Depending on the nature of your thesis, dissertation, or paper, there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes ‘level 1’ headings, or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as ‘level 2’ headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into ‘level 3’ headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper.

Examples of level 1 headings are Introduction, Literature Review, Methodology, and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

Prevent plagiarism, run a free check.

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says ‘Heading 1’.
• Select ‘Update Heading 1 to Match Selection’.
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the ‘References’ section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click ‘OK’ and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select ‘Update Field’. You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, May 15). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved 3 September 2024, from https://www.scribbr.co.uk/thesis-dissertation/contents-page/

Is this article helpful?

Tegan George

Other students also liked, dissertation title page, how to write an abstract | steps & examples, thesis & dissertation acknowledgements | tips & examples.

• How it works

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a  dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read:   The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a  dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

• You would need to right-click on one of the styles to open a drop-down menu.

• Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read:  What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

• The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
• Table of Contents and the Abstract pages are not to contain any numbers.
• The remaining pages would carry the standard page numbers (1,2,3…).
• The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
• All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
• If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
• The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

• To do so, click on the bottom of the page you want before the Table of Contents.
• Open the ‘Insert’ tab and select ‘Page Break’.
• This will create a page between the top and bottom sections of the Table of Contents area.

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

• Place the cursor where you want to place the Table of Contents on the page you added earlier.
• On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a  table of contents sample.

• You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the  thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

• Select ‘Update Table’ in the References tab.
• This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know  how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal ,  full dissertation paper , or  individual chapters .

Is it essential to add a table of content to the dissertation?

Yes, it is important to add a table of content in a dissertation .

How to make an effective table of contents for the dissertation?

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents.

How do I update the table of contents?

You may also like.

The list of figures and tables in dissertation help the readers find tables and figures of their interest without looking through the whole dissertation.

Dissertation discussion is where you explore the relevance and significance of results. Here are guidelines to help you write the perfect discussion chapter.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Mardigian Library
• Subject Guides

Formatting Your Thesis or Dissertation with Microsoft Word

• Table of Contents
• Introduction
• Copyright Page
• Dedication, Acknowledgements, & Preface
• Headings and Subheadings
• Citations and Bibliography
• Page Numbers
• Tables and Figures
• Rotated (Landscape) Pages
• Lists of Tables and Figures
• List of Abbreviations
• Some Things to Watch For
• PDF with Embedded Fonts

Table of contents

If you created your headings and subheadings with styles, and numbered your pages as demonstrated in the Page Numbers tutorial, Microsoft Word can be used to automatically generate a table of contents. Automatic generation of the table of contents has 2 advantages:

• You don't have to manually type the table of contents. Since the entries in the Table of Content must match exactly the headings, subheadings, and page numbers in the thesis, manually creating a table of contents can lead to unintended errors.
• You don't have to go back and edit the table of contents if something moves from one page to another. A couple of clicks and Word will automatically update the table of contents for you.

Below is a tutorial demonstrating how to create the table of contents.

Note: You should create the table of contents last to avoid needing to update the table of contents too often.

• << Previous: Front Matter Lists
• Next: Lists of Tables and Figures >>
• Last Updated: Jul 23, 2024 5:50 PM
• URL: https://guides.umd.umich.edu/Word_for_Theses

Call us at 313-593-5559

Chat with us

Text us: 313-486-5399

Email us your question

• 4901 Evergreen Road Dearborn, MI 48128, USA
• Phone: 313-593-5000
• Maps & Directions
• M+Google Mail
• Emergency Information
• UM-Dearborn Connect
• Wolverine Access

• Privacy Policy

Home » Table of Contents – Types, Formats, Examples

Table of Contents – Types, Formats, Examples

Table of Contents

Definition:

Table of contents (TOC) is a list of the headings or sections in a document or book, arranged in the order in which they appear. It serves as a roadmap or guide to the contents of the document, allowing readers to quickly find specific information they are looking for.

A typical table of contents includes chapter titles, section headings, subheadings, and their corresponding page numbers.

The table of contents is usually located at the beginning of the document or book, after the title page and any front matter, such as a preface or introduction.

Table of Contents in Research

In Research, A Table of Contents (TOC) is a structured list of the main sections or chapters of a research paper , Thesis and Dissertation . It provides readers with an overview of the organization and structure of the document, allowing them to quickly locate specific information and navigate through the document.

Importance of Table of Contents

Here are some reasons why a TOC is important:

• Navigation : It serves as a roadmap that helps readers navigate the document easily. By providing a clear and concise overview of the contents, readers can quickly locate the section they need to read without having to search through the entire document.
• Organization : A well-structured TOC reflects the organization of the document. It helps to organize the content logically and categorize it into easily digestible chunks, which makes it easier for readers to understand and follow.
• Clarity : It can help to clarify the document’s purpose, scope, and structure. It provides an overview of the document’s main topics and subtopics, which can help readers to understand the content’s overall message.
• Efficiency : This can save readers time and effort by allowing them to skip to the section they need to read, rather than having to go through the entire document.
• Professionalism : Including a Table of Contents in a document shows that the author has taken the time and effort to organize the content properly. It adds a level of professionalism and credibility to the document.

Types of Table of Contents

There are different types of table of contents depending on the purpose and structure of the document. Here are some examples:

Simple Table of Contents

This is a basic table of contents that lists the major sections or chapters of a document along with their corresponding page numbers.

Example: Table of Contents

I. Introduction …………………………………………. 1

II. Literature Review ………………………………… 3

III. Methodology ……………………………………… 6

IV. Results …………………………………………….. 9

V. Discussion …………………………………………. 12

VI. Conclusion ……………………………………….. 15

Expanded Table of Contents

This type of table of contents provides more detailed information about the contents of each section or chapter, including subsections and subheadings.

A. Background …………………………………….. 1

B. Problem Statement ………………………….. 2

C. Research Questions ……………………….. 3

II. Literature Review ………………………………… 5

A. Theoretical Framework …………………… 5

B. Previous Research ………………………….. 6

C. Gaps and Limitations ……………………… 8 I

II. Methodology ……………………………………… 11

A. Research Design ……………………………. 11

B. Data Collection …………………………….. 12

C. Data Analysis ……………………………….. 13

IV. Results …………………………………………….. 15

A. Descriptive Statistics ……………………… 15

B. Hypothesis Testing …………………………. 17

V. Discussion …………………………………………. 20

A. Interpretation of Findings ……………… 20

B. Implications for Practice ………………… 22

VI. Conclusion ……………………………………….. 25

A. Summary of Findings ……………………… 25

B. Contributions and Recommendations ….. 27

Graphic Table of Contents

This type of table of contents uses visual aids, such as icons or images, to represent the different sections or chapters of a document.

I. Introduction …………………………………………. [image of a light bulb]

II. Literature Review ………………………………… [image of a book]

III. Methodology ……………………………………… [image of a microscope]

IV. Results …………………………………………….. [image of a graph]

V. Discussion …………………………………………. [image of a conversation bubble]

Alphabetical Table of Contents

This type of table of contents lists the different topics or keywords in alphabetical order, along with their corresponding page numbers.

A. Abstract ……………………………………………… 1

B. Background …………………………………………. 3

C. Conclusion …………………………………………. 10

D. Data Analysis …………………………………….. 8

E. Ethics ……………………………………………….. 6

F. Findings ……………………………………………… 7

G. Introduction ……………………………………….. 1

H. Hypothesis ………………………………………….. 5

I. Literature Review ………………………………… 2

J. Methodology ……………………………………… 4

K. Limitations …………………………………………. 9

L. Results ………………………………………………… 7

M. Discussion …………………………………………. 10

Hierarchical Table of Contents

This type of table of contents displays the different levels of headings and subheadings in a hierarchical order, indicating the relative importance and relationship between the different sections.

    A. Background …………………………………….. 2

      B. Purpose of the Study ……………………….. 3

      A. Theoretical Framework …………………… 5

             1. Concept A ……………………………….. 6

                    a. Definition ………………………….. 6

                     b. Example ……………………………. 7

              2. Concept B ……………………………….. 8

       B. Previous Research ………………………….. 9

III. Methodology ……………………………………… 12

       A. Research Design ……………………………. 12

             1. Sample ……………………………………. 13

               2. Procedure ………………………………. 14

       B. Data Collection …………………………….. 15

            1. Instrumentation ……………………….. 16

            2. Validity and Reliability ………………. 17

       C. Data Analysis ……………………………….. 18

          1. Descriptive Statistics …………………… 19

           2. Inferential Statistics ………………….. 20

IV. Result s …………………………………………….. 22

    A. Overview of Findings ……………………… 22

B. Hypothesis Testing …………………………. 23

V. Discussion …………………………………………. 26

A. Interpretation of Findings ………………… 26

B. Implications for Practice ………………… 28

VI. Conclusion ……………………………………….. 31

A. Summary of Findings ……………………… 31

B. Contributions and Recommendations ….. 33

Table of Contents Format

Here’s an example format for a Table of Contents:

I. Introduction

C. Methodology

II. Background

A. Historical Context

B. Literature Review

III. Methodology

A. Research Design

B. Data Collection

C. Data Analysis

IV. Results

A. Descriptive Statistics

B. Inferential Statistics

C. Qualitative Findings

V. Discussion

A. Interpretation of Results

B. Implications for Practice

C. Limitations and Future Research

VI. Conclusion

A. Summary of Findings

B. Contributions to the Field

C. Final Remarks

VII. References

VIII. Appendices

Note : This is just an example format and can vary depending on the type of document or research paper you are writing.

When to use Table of Contents

A TOC can be particularly useful in the following cases:

• Lengthy documents : If the document is lengthy, with several sections and subsections, a Table of contents can help readers quickly navigate the document and find the relevant information.
• Complex documents: If the document is complex, with multiple topics or themes, a TOC can help readers understand the relationships between the different sections and how they are connected.
• Technical documents: If the document is technical, with a lot of jargon or specialized terminology, This can help readers understand the organization of the document and locate the information they need.
• Legal documents: If the document is a legal document, such as a contract or a legal brief, It helps readers quickly locate specific sections or provisions.

How to Make a Table of Contents

Here are the steps to create a table of contents:

• Organize your document: Before you start making a table of contents, organize your document into sections and subsections. Each section should have a clear and descriptive heading that summarizes the content.
• Add heading styles : Use the heading styles in your word processor to format the headings in your document. The heading styles are usually named Heading 1, Heading 2, Heading 3, and so on. Apply the appropriate heading style to each section heading in your document.
• Insert a table of contents: Once you’ve added headings to your document, you can insert a table of contents. In Microsoft Word, go to the References tab, click on Table of Contents, and choose a style from the list. The table of contents will be inserted into your document.
• Update the table of contents: If you make changes to your document, such as adding or deleting sections, you’ll need to update the table of contents. In Microsoft Word, right-click on the table of contents and select Update Field. Choose whether you want to update the page numbers or the entire table, and click OK.

Purpose of Table of Contents

A table of contents (TOC) serves several purposes, including:

• Marketing : It can be used as a marketing tool to entice readers to read a book or document. By highlighting the most interesting or compelling sections, a TOC can give readers a preview of what’s to come and encourage them to dive deeper into the content.
• Accessibility : A TOC can make a document or book more accessible to people with disabilities, such as those who use screen readers or other assistive technologies. By providing a clear and organized overview of the content, a TOC can help these readers navigate the material more easily.
• Collaboration : This can be used as a collaboration tool to help multiple authors or editors work together on a document or book. By providing a shared framework for organizing the content, a TOC can help ensure that everyone is on the same page and working towards the same goals.
• Reference : It can serve as a reference tool for readers who need to revisit specific sections of a document or book. By providing a clear overview of the content and organization, a TOC can help readers quickly locate the information they need, even if they don’t remember exactly where it was located.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Context of the Study – Writing Guide and Examples

Research Topics – Ideas and Examples

Research Questions – Types, Examples and Writing...

Informed Consent in Research – Types, Templates...

Limitations in Research – Types, Examples and...

Research Paper Title – Writing Guide and Example

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Structure the Table of Contents for a Research Paper

4-minute read

• 16th July 2023

So you’ve made it to the important step of writing the table of contents for your paper. Congratulations on making it this far! Whether you’re writing a research paper or a dissertation , the table of contents not only provides the reader with guidance on where to find the sections of your paper, but it also signals that a quality piece of research is to follow. Here, we will provide detailed instructions on how to structure the table of contents for your research paper.

Steps to Create a Table of Contents

• Insert the table of contents after the title page.

Within the structure of your research paper , you should place the table of contents after the title page but before the introduction or the beginning of the content. If your research paper includes an abstract or an acknowledgements section , place the table of contents after it.

• List all the paper’s sections and subsections in chronological order.

Depending on the complexity of your paper, this list will include chapters (first-level headings), chapter sections (second-level headings), and perhaps subsections (third-level headings). If you have a chapter outline , it will come in handy during this step. You should include the bibliography and all appendices in your table of contents. If you have more than a few charts and figures (more often the case in a dissertation than in a research paper), you should add them to a separate list of charts and figures that immediately follows the table of contents. (Check out our FAQs below for additional guidance on items that should not be in your table of contents.)

• Paginate each section.

Label each section and subsection with the page number it begins on. Be sure to do a check after you’ve made your final edits to ensure that you don’t need to update the page numbers.

• Format your table of contents.

The way you format your table of contents will depend on the style guide you use for the rest of your paper. For example, there are table of contents formatting guidelines for Turabian/Chicago and MLA styles, and although the APA recommends checking with your instructor for formatting instructions (always a good rule of thumb), you can also create a table of contents for a research paper that follows APA style .

• Add hyperlinks if you like.

Depending on the word processing software you’re using, you may also be able to hyperlink the sections of your table of contents for easier navigation through your paper. (Instructions for this feature are available for both Microsoft Word and Google Docs .)

To summarize, the following steps will help you create a clear and concise table of contents to guide readers through your research paper:

1. Insert the table of contents after the title page.

2. List all the sections and subsections in chronological order.

3. Paginate each section.

4. Format the table of contents according to your style guide.

5. Add optional hyperlinks.

If you’d like help formatting and proofreading your research paper , check out some of our services. You can even submit a sample for free . Best of luck writing your research paper table of contents!

What is a table of contents?

A table of contents is a listing of each section of a document in chronological order, accompanied by the page number where the section begins. A table of contents gives the reader an overview of the contents of a document, as well as providing guidance on where to find each section.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

What should I include in my table of contents?

If your paper contains any of the following sections, they should be included in your table of contents:

●  Chapters, chapter sections, and subsections

●  Introduction

●  Conclusion

●  Appendices

●  Bibliography

Although recommendations may differ among institutions, you generally should not include the following in your table of contents:

●  Title page

●  Abstract

●  Acknowledgements

●  Forward or preface

If you have several charts, figures, or tables, consider creating a separate list for them that will immediately follow the table of contents. Also, you don’t need to include the table of contents itself in your table of contents.

Is there more than one way to format a table of contents?

Yes! In addition to following any recommendations from your instructor or institution, you should follow the stipulations of your style guide .

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

5-minute read

Free Email Newsletter Template

Promoting a brand means sharing valuable insights to connect more deeply with your audience, and...

6-minute read

How to Write a Nonprofit Grant Proposal

If you’re seeking funding to support your charitable endeavors as a nonprofit organization, you’ll need...

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

Make sure your writing is the best it can be with our expert English proofreading and editing.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgments
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Table of contents

The Table of Contents should follow these guidelines:

• ​All sections of the manuscript are listed in the Table of Contents except the Title Page, the Copyright Page, the Dedication Page, and the Table of Contents.
• You may list subsections within chapters
• Creative works are not exempt from the requirement to include a Table of Contents

Table of contents example

Here is an example of a Table of Contents page from the Template. Please note that your table of contents may be longer than one page.

• << Previous: Dedication Page
• Next: List of Figures (etc.) >>
• Last Updated: Aug 26, 2024 11:00 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to create a table of contents for a dissertation (apa), published by steve tippins on june 20, 2022 june 20, 2022.

Last Updated on: 7th June 2024, 05:08 am

APA Dissertation Table of Contents Format Guidelines

• The table of contents should be double spaced with one-inch margins on all sides. 
• It should be written in the same font and size as the rest of your dissertation.  
• At the top of the page, write Table of Contents , centered and in bold.
• Although in the body of the paper you can use up to five levels of headings, up to three levels are usually provided in the Table of Contents. Including lower-level headings is optional. 
• Indent each subheading five spaces. 
• Write all text in title case. In title case, the first letter of major words is capitalized.
• Provide the page number where the main headings and subheadings begin, and provide dotted lines between the heading and the page number.
• Page numbers for the Dedication, Acknowledgements, and Preface should be in lower case Roman Numbers (i, v, x, l, c, d and m.). The page numbers for the rest of the text should be in Arabic numerals (1,2, 3, 4, etc.).

How to Write a Dissertation Table of Contents in APA Using Microsoft Word

Step 1. Instead of manually trying to write and format the table of contents, you can create a generated one using Microsoft Word. To do this, first go to the Home tab. This is where you will choose the styles for the table of contents. 

Step 2. The top-level headings will be your chapter titles, so on the right side of the tab, apply the Heading 1 style. 

Step 3. The second-level headings will be your subheadings, so apply the Heading 2 style. This will place your subheadings underneath your main headings.

Step 4. You will now produce page links to your document. In the top ribbon, click on the References tab and select Table of Contents . 

Step 5. If the style does not indicate APA, such as the one below, use the drop down arrow to select APA. 

Step 6. Next, choose the number of levels that you want. In this case, you want to be able to have up to three levels, so choose Automatic Table 2 , which has the appropriate heading for a dissertation. 

Step 7. Click ok , and you are all set. Microsoft word will automatically generate your dissertation’s table of contents as you write it.

List of Tables and Figures

Your list of tables and figures will be written at the end of the list of information in the body of your paper. You will create these lists the same way that you created the main table of contents. 

However, the headings will be different. 

Instead of the heading “Table of Contents,” the headings will be “List of Tables” and “List of Figures.” (An example is provided in the table of contents example below.)

Sample of a Dissertation Table of Contents

In the example below, there are three level headings. The list of tables and figures are provided at the bottom of the other contents. The sections in your table of contents may be different depending on your college’s requirements. 

Updating the Dissertation Table of Contents

As you continue working on your dissertation, you will need to update the page numbers because they may change. 

To update the page numbers, right-click on the table of contents in your document and select the Update field . Then, the Update Table of Contents box will appear. 

You can choose to Update page numbers only or all the information in the table of contents by clicking on Update entire table . 

Note: For more information, refer to the APA Manual 7 th edition , sections 2.2-2.27.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

• KU Libraries
• Subject & Course Guides
• KU Thesis and Dissertation Formatting
• Table of Contents

KU Thesis and Dissertation Formatting: Table of Contents

• Formatting Specifics
• Title and Acceptance Pages
• Fonts and Spacing
• Page Numbering
• List of Figures
• Rotating Charts or Tables
• Working with Footnotes
• Converting to PDF
• Embedding Fonts
• Completed KU Dissertations & Theses
• About: Survey of Earned Doctorates
• Copyright and ETD Release Form
• Resources for KUMC Students
• Thesis/Dissertation Filenames
• LaTeX/BibTeX Support

Office of Graduate Studies Thesis and Dissertation Formatting Guidelines

These rules are taken from the KU Office of Graduate Studies Thesis or Dissertation Formatting Guidelines. To see the full thesis or dissertation formatting requirements, visit https://graduate.ku.edu/submitting

Creating an Automated Table of Contents

Located in the Home tab, Word’s Style Gallery makes it easy to set consistent, one-click formatting for headings throughout your document. It is these style settings that Word uses to create an automatic table of contents. Using an automatic table of contents will save you the huge headache of dealing with dot leaders, spacing, and having to completely re-type your table of contents if the order of your pages changes even a little. Plus, styles are easy to use! Step-by-step how-to instructions are included below for setting heading styles and then inserting a table of contents in Word 2010, Word 2013 or Word 2011 for Mac.

• Printed Instructions (TOC Word 2010)
• Printed Instructions (TOC Word 2013)
• Printed Instructions (TOC Word 2011 for Mac)
• Printed Instructions (TOC Word 2016 Mac)
• Printed Instructions (TOC Word 2016 PC)
• Creating a Manual-Entry Table of Contents

Working with Outline Style (Numbered) Headings

Numbered headings can be very tricky and many citation styles do not require their use. If you are working with a style the does require it, however, Shauna Kelly's blog has some great help .

Subject Guide

• << Previous: Page Numbering
• Next: List of Figures >>
• Last Updated: May 9, 2024 9:48 AM
• URL: https://guides.lib.ku.edu/etd

Graduate College Formatting Guide

• Page Numbers (Microsoft Word)
• Page Numbers (Google Docs)
• Page Breaks and Section Breaks
• Headings, Subheadings, and Table of Contents (Microsoft Word)
• Headings, Subheadings, and Table of Contents (Google Docs)
• Inserting Tables and Figures
• Comments and Track Changes
• References, Bibliography, Works Cited
• Landscape Pages & Special Materials

Setting the Normal Style

Set the "normal" style of font.

Before we can set up headings, we'll need to define the format of the text that  isn't  a heading. The "styles" in word set some default formatting for text. Setting up the "Normal" style will create a default font setting to keep the text uniform throughout the document. The Styles pane is located under the HOME tab.

Right click on the "Normal" style to open the Modify option.

This will open a Modify Style Dialog Box. Start by changing the Paragraph formatting. This is located by selecting the Format drop down in the bottom left of the Dialog Box.

There are two things that should be set under the Paragraph settings. Under the INDENTS AND SPACING tab, check to turn on "Don't add space between paragraphs of the same style." Under the LINE AND PAGE BREAKS tab, check to turn on the "Widow/Orphan Control."

Once both of those have been set and you click "okay," you'll be returned to the Modify Style Dialog Box. Now we can set the font formatting. Select the font you wish to use throughout the document, change the font size to 12 point, ensure the line spacing is double spaced, and select the option to remove space between paragraphs (this is indicated by two lines pointing towards each other).

Adding Headings & Subheadings

Inserting headings and subheadings.

Using the same technique we can create a standard for the various types of headings and subheadings used across the thesis. The Thesis & Dissertation Manual generally follows APA style for heading levels. In order to keep headings consistently correct and link the Table of Contents, the Styles function in Word is used. This is going to show you some examples of the formatting required for the headings and how to use the various heading levels. We'll also see how to use styles and update your Table of Contents. 

Modifying Heading Levels to Match Required Formatting

Level 1 headings.

Chapters will be linked to Heading Level 1. If you choose not to have chapters, you will use level 1 for your major headings (typically: Introduction, Literature Review, Methods, etc.). They should be typed in title case, center aligned, and bold. The number of the chapter can be in Arabic or Roman numerals or spelled out so long as it is consistently done throughout the document. The heading should be on one line, so if you are using chapters, it should look something like this:

Chapter 1: Introduction

Once you have formatted a chapter heading, select the text of the chapter heading then right click on Heading 1 in the Styles pane and select "Update Heading 1 to Match Selection." 

Adding More Level 1 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 1 heading in title case and then, with your cursor in line with the heading, click on the heading 1 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 2 Headings

Subsections of your major headings should be the next level down. Level 2 headings will be left aligned, bold, and title case. They should look like this:

Level 2 Heading

Once you have formatted a level 2 heading, select the text of the heading then right click on Heading 2 in the Styles pane and select "Update Heading 2 to Match Selection." 

Adding More Level 2 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 2 heading in title case and then, with your cursor in line with the heading, click on the heading 2 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 3 Headings

If you wish to further subsection your paper, you will use level 3 headings. Level 3 headings will be bold italic, left aligned, and title case. They should look like this:

Level Three Heading

Once you have formatted a level 3 heading, select the text of the heading then right click on Heading 3 in the Styles pane and select "Update Heading 3 to Match Selection." 

Adding More Level 3 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 3 heading in title case and then, with your cursor in line with the heading, click on the heading 3 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 4 & 5 Headings (and beyond)

It is common to find the first 3 heading levels in papers that are as long as a thesis or dissertation. Occasionally, you may find the need to go beyond those levels. It is important to note that for the thesis and dissertation, only the first 3 headings should be included in the table of contents. It is also recommended that you only use the styles function for the first 3 headings because they stand alone on their own line of text. The next heading levels will begin on the same line as the paragraph that starts that section which means that the style function will not work properly. If you were to link the heading, the entire paragraph will appear in your table of contents.

This means that you will need to, carefully, ensure you are formatting the headings manually. Each level should be consistently formatted the same way. APA has standards for levels 4 & 5 which are described here. For heading levels beyond level 5, you should pick a consistent formatting that clearly indicates they are a subsection of the level 5 heading. It is also recommended that you carefully evaluate if this level of heading is truly necessary for your writing.

Level 4 Heading

Level 4 headings will begin on the same line of the paragraph that makes up the section. It will be indented 0.5", much like a normal paragraph indent. The heading will be in title case and bold font with a period at the end of the heading:

            Level Four Heading Here.  Start the first sentence of the paragraph that follows the heading on the same line and continue typing. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc at pellentesque massa. Sed nec urna nec est efficitur iaculis. Etiam efficitur velit id dignissim eleifend. Duis euismod, nisi sed cursus sodales, sem nisi porttitor ante, eu dignissim justo tortor nec mauris.

Level 5 Heading

Level 5 headings will begin on the same line of the paragraph that makes up the section. It will be indented 0.5", much like a normal paragraph indent. The heading will be in title case and bold italic font with a period at the end of the heading:

            Level Five Heading Here.   Start the first sentence of the paragraph that follows the heading on the same line and continue typing. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc at pellentesque massa. Sed nec urna nec est efficitur iaculis. Etiam efficitur velit id dignissim eleifend. Duis euismod, nisi sed cursus sodales, sem nisi porttitor ante, eu dignissim justo tortor nec mauris.

Table of Contents

Once you have added headings and used the styles feature, you will be able to use the word function to "generate" a table of contents. You will need to type "Table of Contents" in bold font, centered at the top of the page you will be inserting your table of contents onto. Then, place your cursor on the next line

From the References tab, click on Table of Contents and select Custom Table of Contents...

From the pop up window, you will want to change the tab leaders to (none) rather than the default. The rest of the default settings will be fine, so click ok once you've done so.

This will populate your table of contents.

From here, you will need to open the style pane to modify some of the formatting of the table of contents.

You will need to locate TOC 1 and click on it, and select "modify" from the drop down list.

TOC 1 style should be bold. If you've properly set up your "normal style" of font (see above), this should be the only modification to your TOC styles that you need to make. If the text is not properly set up and you need to further format it, you can do so from this window.

If set up correctly, your table of contents should look like the image below.

• << Previous: Page Breaks and Section Breaks
• Next: Headings, Subheadings, and Table of Contents (Google Docs) >>
• Last Updated: Jul 23, 2024 9:44 AM
• URL: https://guides.lib.uni.edu/grad-college-format

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples

Table of contents

Use our free Readability checker

A dissertation table of contents is a list of the chapters and sections included in a dissertation or thesis, along with their page numbers. It helps to navigate the document easily and locate specific information. Each chapter or section should be listed with its corresponding page number. The table of contents should be formatted according to the guidelines of the specific style guide being used, such as APA or MLA.

We would guess that students usually start working on the table of contents at the last minute. It is quite apparent and makes sense, as this is the list of chapters and sections with page locations. Do you think it's easy? 

From our experience, it can be quite tricky to organize everything according to APA, Chicago, or any other academic writing style. In this blog, we will discuss how to write a table of contents for a research paper , thesis or dissertation in Microsoft Word. We will create it together to guide students through the process. 

Also, here you will find examples of table of contents created by thesis writers at StudyCrumb . Let’s go!

What Is a Table of Contents: Definition

It is obvious that the table of contents (TOC) is an essential manuscript part you can’t skip. If you are dealing with a dissertation, thesis or research paper, you need to know how to build it in accordance with academic guidance. This is a detailed roadmap for your work and outlined structure you can follow for a research presentation. 

In case you are working on an essay or report, you may not include the table of contents, as it is a short academic text. But for the research paper, thesis or dissertation, table of contents is essential and required. It is possible to say the same about any Master’s project. It should be located between the dissertation abstract and introduction chapter. In most cases, it is about 2-3 pages long. 

Our expert dissertation writing service prepared a great template that can be used for your work. Make your research formatting easy with ready solutions!

Types of Table of Contents

How to choose which table of contents will fit your research paper, thesis, dissertation, or report best? Make a decision based on your work length. Some academic writing styles, such as APA paper format or MLA style , have specific formatting for this list. 

However, we will outline the most commonly used typology:

• Single-level table of contents. At this type, we use only chapters. For instance, you will have an Introduction, Literature Review, methodology, and other chapters with page numbers. It can be used for shorter research work. For long writing forms like manuscripts, it can be too broad, and you will need to go into details.
• Subdivided table of contents. The most frequently used form to organize the contents table. It will include not only chapters but also sections — a level 2 subheading for each part. It will help to be more specific about what to expect in each part of your research work.
• Table of contents with multiple levels. This is a more divided structure, including subheadings with a level 3 for each section. Quite often, those subheadings can be rewritten or deleted during the last editing. It is essential to keep them in the right order.

Before you decide which type will work best for you, let us share with you some examples of each formatting style.

Example of Table of Contents With a Single Level

Introduction: The Misinformation Roots ………..…… 3 Literature Review .....................................….....………… 10 Research Methodology and Design ……................. 24 Results.............................................................................. 28 Discussion ....................................................................... 32

Sometimes, you will need to put an extra emphasis on subsections. Check this layout to see how your subheadings can be organized.

Example of Table of Contents Page with Subdivided Levels

Introduction: Information War ............……………….. 3       Background…………………………………….………..…… 4       Current State ……………………………………...…...…… 5       Defining Research Questions………………………. 9 Literature Review………………………...……………..……... 11       The Roots of Information Warfare ………....… 11        Information Wars …………………………….………..… 14        Cyber Wars Research ........................................ 17

If you are working on a lengthy, complex paper, this outline will suit your project most. It will help readers navigate through your document by breaking it down into smaller, more manageable sections.

Multi-Level Table of Contents Page Example

Introduction……………………………………………….......……….… 3       Emergence of Climate Change ………..……....….….. 3       Key Activist Groups in Climate Change .............. 5              Greenpeace International ………..…………......... 9              European Climate Foundation …….……………. 10              WWF ……………………………………….……….............. 11        Significant Movements ……………….………....……… 13 Literature Review ……………………………………......…………. 15

What Sections Should Be Included in a Table of Contents?

To start with, the scientific table of contents should include all chapters and its subheading. It is important to choose the formatting that will give your readers a full overview of your work from the very beginning. However, there are other chapters that you may miss constructing the 2-pager table. So, let's look at all you need to include:

• Dissertation introduction
• Literature review
• Research methodology
• Results section
• Dissertation discussion
• Conclusion of a thesis
• Reference list. Mention a number of a page where you start listing your sources.
• Appendices. For instance, if you have a data set, table or figure, include it in your research appendix .

This is how the ideal structured dissertation or research paper table of contents will look like. Remember that it still should take 2 pages. You need to choose the best formatting style to manage its length.

Tables, Figures, and Appendices in TOC

While creating a table of contents in a research paper, thesis or dissertation, you will need to include appendices in each case you have them. However, the formatting and adding tables and figures can vary based on the number and citation style. If you have more than 3 tables or figures, you may decide to have all of them at the end of your project. So, add them to the table of contents. 

Figures, graphics, and diagrams in research papers, dissertations and theses should be numbered. If you use them from another source, ensure that you make a proper citation based on the chosen style guide.

Appendix in Table of Contents Example

Appendix A. Row Data Set…………………………………… 41 Appendix B. IBR Data………………………………………….… 43 Appendix C. SPSS Data………………………………………… 44

What Shouldn't Be Included in a Table of Contents?

When creating a dissertation table of contents, students want to include everything they have in a document. However, some components should not be on this page. Here is what we are talking about:

• Thesis acknowledgement
• Paper abstract
• The content list itself

Acknowledgement and abstract should be located before the content list, so there is no need to add them. You need to present a clear structure that will help your readers to navigate through the work and quickly find any requested information.

How to Create a Table of Contents for a Research Paper or Dissertation In Word?

It may look like working with this list can take a long. But we have one proposal for our users. Instead of writing a table of contents manually, create it automatically in Microsoft Word. You do not need any specific tech knowledge to do this. Let’s go through this process step-by-step and explain how to make a table of contents for a research paper or dissertation in a few clicks.

• Open Home tab and choose the style for your table of contents (ToC next).
• Apply heading 1 to your chapters, heading 2 to the subheading, and if needed heading 3 to the level 3 heading.
• Next, you are going to create a research paper or PhD dissertation table of contents. Open References and choose ToC.
• Choose the citation style for your work. For example, let’s choose APL for now. Meeting all style requirements (bold font, title formatting, numbers) is essential.
• Define the number of levels for your dissertation or thesis table of contents. In case you want to have 3 levels, choose Automatic Table 2.
• You are done! Click ok, and here is your page with listed chapters!

You see how easy it can be! Every time you make changes to your text or headings, it will be automatic.

Updating Your Table of Contents in MS Word

Table of contents of a research paper or dissertation is created, and you continue to edit your work until submission. It is common practice, and with MS Word, you can automate all the updates. 

Let’s outline this process in our step-by-step guide!

• Right-click on your ToC in a document.
• Update field section is next.
• Choose “update ToC."
• Here, you can update your entire ToC — choose an option that works the best for you!

As you may see, working with automated solutions is much easier when you write a dissertation which has manifold subsections. That is why it is better to learn how to work on MS Word with the content list meaning be able to manage it effectively.

Table of Contents Examples

From our experience, students used to think that the content list was quite a complicated part of the work. Even with automated solutions, you must be clear about what to include and how to organize formatting. To solve the problem and answer all your questions, use our research paper or dissertation contents page example. Our paper writers designed a sample table of contents to illustrate the best practices and various styles in formatting the work. 

Check our samples to find advanced options for organizing your own list.

Example of Table of Contents in Research Paper

As you can see, this contents page includes sections with different levels.

Thesis/Dissertation Table of Contents Example

Have a question about your specific case? Check samples first, as we are sure you can get almost all the answers in our guides and sample sets. 

>> Read more: APA Format Table of Contents

Tips on Creating a Table of Contents

To finalize all that we shared on creating the table of contents page, let’s go through our tips list. We outline the best advice to help you with a dissertation table of contents.

• Use automated solutions for creating a list of chapters for your report, research papers, or dissertations — it will save you time in the future.
• Be clear with the formatting style you use for the research.
• Choose the best level type of list based on the paper length.
• Update a list after making changes to the text.
• Check the page list before submitting the work.

Bottom Line on Making Table of Contents for Dissertations/ Papers

To summarize, working with a research paper, thesis or dissertation table of contents can be challenging. This article outlines how to create a table of contents in Word and how to update it appropriately. You can learn what to include in the content list, how long it can be, and where to locate it. Write your work using more than one table of contents sample we prepared for students. It is often easy to check how the same list was made for other dissertations before finalizing yours. We encourage you to learn how to create a list with pages automatically and update it. It will definitely make your academic life easier.

Not sure if your work 's quality level is enough for getting a top-notch result? We’ve got you covered! Our team of skilled academic writers is always ready to help once you ask “ write my dissertation for me !" Just select your writer, send them your requirements and get a custom study tailored to your instructions.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

• Meet the Mentors
• Get Involved
• Get the T-Shirt
• Life Science Marketing
• Community Marketing
• Custom Marketing

Join Us Sign up for our feature-packed newsletter today to ensure you get the latest expert help and advice to level up your lab work.

• Genomics & Epigenetics
• DNA / RNA Manipulation and Analysis
• Protein Expression & Analysis
• PCR & Real-time PCR
• Flow Cytometry
• Microscopy & Imaging
• Cells and Model Organisms
• Analytical Chemistry and Chromatography Techniques
• Chemistry for Biologists
• Basic Lab Skills & Know-how
• Equipment Mastery & Hacks
• Managing the Scientific Literature
• Career Development and Networking
• Dealing with Fellow Scientists
• Getting Funded
• Lab Statistics & Math
• Organization & Productivity
• Personal Development
• PhD Survival
• Soft Skills & Tools
• Software & Online Tools
• Survive & Thrive
• Taming the Literature
• Writing, Publishing & Presenting
• Software and Online Tools

Using Word to Write your Thesis: Making a Table of Contents, Inserting Captions, and Cross-referencing

Our latest tips for thesis writing with Word highlight three useful tools that can help you effortlessly create an easily navigatable thesis using built-in Word tools.

Published December 1, 2020

Lauren has a PhD in Biochemistry from the University of Dundee .

• Setting up a table of contents
• Learning to insert captions, which will make compiling lists of figures and tables a painless process at the end of your write up
• Learning how to cross-reference your document, so that figures or sections that you refer to in the body text are always numbered correctly, even when you move things around.

Tip #1: Automatically Generate a Table of Contents

• Click the “ references tab”
• Select Table of Contents
• Pick a style

Tip #2: Insert Captions

• Go to the caption numbering tab
• Tick the “include chapter number” box
• Select how you want the numbers to look.

Create a List

• Click the References tab
• Click “ Insert table of figures ”
• Select a caption label ( table or figure )
• Click “ OK”

• Click anywhere on the list to highlight it
• Click “ Update table ”

Tip #3: Make Sure You Cross-reference

Thesis Writing Tips Wrapped Up

Share this article:

More 'Software and Online Tools' articles

5 Digital Tools to Increase Your Productivity in Research

Scientific research is a constant battle against time. Whether it is your Masters, PhD or Postdoc, you always feel the pressure to generate data for external validation. For that, you need to spend your time on the bench and not at the desk, but that can be hard. Unfortunately, non-laboratory tasks occupy a large segment…

The Beginner’s Guide to LaTeX

For those of you who read the previous post about LaTeX and are interested in giving it a go, but just don’t know where to start, this article should get you on your feet. I used LaTeX to write my thesis and was (mostly) self taught, so I know how scary it is to begin…

How to Start Using Coding to Automate Image Analysis Part 2: Batch Processing Multiple Images

In Part 1 of this article, I introduced you to using code for basic image manipulation in ImageJ and working with the command recorder to expand your coding vocabulary. I covered how to make a simple macro, how to edit it and then save it to be run again another time. If you skipped the…

Brushing Up On Your Excel Skills: Part Two

Last time we brushed up on cell referencing and constructing formulae to use Excel for some basic and some slightly more advanced calculations. This time we’re going to move on to using some built-in Excel functions and go through how to apply all that we’ve done so far to a worked example that is relevant…

10 links: Free Mac Software for Molecular Biologists

I’ve put together this list of 10 pieces of free molecular biology software for Macs. I hope you will find at least some of it useful. If any of your favorite free programs are not included, please email me and I’ll add them or you can leave a comment with a link. If you are…

Using Word to Write your Thesis: Creating an Outline

Get your thesis writing off to a great start by learning how to create a thesis outline in Microsoft Word.

We collate wisdom and tools from researchers worldwide to help you to accelerate your progress.

Sign up now to get it in your inbox

Newsletters

• Technical Skills
• More Skills
• Microscopy Focus
• Privacy Policy
• Cookie Policy
• Terms of Use

Copyright © Science Squared – all rights reserved

[LIVE WEBINAR] How to Multiplex Any Assay

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Tables in your dissertation

Published on November 2, 2016 by Kirsten Dingemanse . Revised on January 31, 2020.

Dissertations and theses often include tables. One advantage of tables is that they allow you to present data in a clear and concise manner without having to provide a lengthy explanation in the text. This is particularly helpful in sections such as your results chapter.

Table of contents

Step 1. decide where to insert a table, step 2. create your table, example of a table in apa style, step 3. assign your table a number and title, step 4. clarify your table with a note (optional), step 5. cite the table within the text, where should you add a table.

Tables are often included in the main body of a dissertation, so that readers can view them straight away. In this case, place the table immediately above or below the paragraph in which you introduce or refer to it.

If you are not allowed to include tables within your main text or your tables are very long, you can instead put them in an appendix to your dissertation. However, bear in mind that doing so might make your text less readable, as readers will always have to turn to an appendix . It’s thus better to include at least key tables in the main document.

Be careful. Never directly import tables from a statistical analysis program such as SPSS, as these tables provide too much detailed information. For instance, if you just want to report the results of a t-test from SPSS, your table likely does not need to include figures related to the standard mean error.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

All word processing programs include an option to create a table. For example, in Word’s top menu bar you can either click on the “Table” tab or select Insert -> Table -> New.

To keep your tables consistent, it’s important that you use the same formatting throughout your dissertation. For example, make sure that you always use the same line spacing (e.g., single vs. double), that the data is aligned the same way (namely center, left or right) and that your column and row headings always reflect the same style same (for example, bold).

If you are using Word, you can also opt to use one of the program’s pre-set table styles. Doing so will ensure that all of the tables throughout your dissertation have the same formatting. You can apply one of these styles by selecting the table and then selecting one of the preformatted “Table Styles.”

For examples of tables in MLA format , check our guide here .

Once you have decided where to incorporate a table, assign it a number (which should then be noted at the top of the table). Different numbering schemes can be used, but the easiest is to just use Table 1, Table 2 and so forth. Numbers will allow you to easily refer to the correct table within the text.

You can also set a table up so that Word automatically assigns it a number. We recommend that you do this, as it will ensure that your table numbers are always correct. For instance, if you add a new table in the middle of your dissertation, Word will automatically adjust the table numbers throughout the rest of the document. Using this Word feature also makes it easy to generate a list of tables .

Automatically numbering tables

To use automatic numbering, click on the tab ‘Reference’ and select ‘Insert Caption’.

Titling tables

It is important that you always give each table a title. If you use automatic table numbering, a table’s title will automatically be noted after its number.

A table title should be clear and comprehensive enough that it does not need to be explained in the text. Readers should be able to understand what a table contains solely on the basis of its title.

Make sure you also follow any title specifications that either your academic program or the citation style you are using dictates. For instance, in APA Style it is customary to put a table’s title under its number.

A note can be used for information that helps to clarify the data in a table. For example, you can specify p-values, define abbreviations or explain further details related to a particular row or column. If you don’t have anything special to convey (and the table is your own creation), you don’t need to include a note.

Table from another source

If you have taken a table from another source, it’s mandatory that you explain this in a note. However, how this should be done varies by citation style . Below we explain how you should handle a table from another source according to the APA Style .

The APA Style specifies that you should write “Reprinted from” or “Adapted from” followed by the title and complete source information of the book or article that you have taken the table from.

It is important that you always refer to your table in the text. This helps readers to understand why the table is included and ensures that you don’t have any “free-floating” tables in your dissertation. All tables should have a clear function.

When citing a table in your running text, mention the table’s number instead of using phrases such as “the table below” (which can create confusion for your readers).

A numbered table in the main document

The table below shows that…

Table 1 shows that…

When referring to a table in an appendix, include both the table number and the appendix number.

A numbered table in the appendix

Table 2 (see Appendix 1) shows that…

There is evidence that… (see Table 2, Appendix 1)

Cross-references

If you automate the numbering of your tables, you can choose to apply cross-references. This feature creates links in your text that lead directly to the corresponding table when clicked. The advantage of this is that the numbering is always correct.

In Word, cross-referencing can be activated by selecting Insert ->  Cross-Reference from the top menu bar. From there set the “Reference type” to “Table” and “Insert reference to” to whatever you wish to include (for example, the entire caption or only the table’s name and number). Then select the table to which you want to link and click “Insert”.

Checklist: Tables

Each table has a number.

Each table has a clear, descriptive title.

All tables are consistently formatted according to my style guide or department’s requirements.

The content of each table is clearly understandable in its own right.

I have referred to each table in the main text.

I have correctly cited the source of any tables reproduced or adapted from other authors.

Your tables look great! Use the other checklists to improve your thesis or dissertation.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Dingemanse, K. (2020, January 31). Tables in your dissertation. Scribbr. Retrieved September 3, 2024, from https://www.scribbr.com/tips/tables-in-your-dissertation/

Is this article helpful?

Kirsten Dingemanse

What is your plagiarism score.