generic problem solving approach

Bipolar Disorder
Therapy Center
When To See a Therapist
Types of Therapy
Best Online Therapy
Best Couples Therapy
Best Family Therapy
Managing Stress
Sleep and Dreaming
Understanding Emotions
Self-Improvement
Healthy Relationships
Student Resources
Personality Types
Guided Meditations
Verywell Mind Insights
2024 Verywell Mind 25
Mental Health in the Classroom
Editorial Process
Meet Our Review Board
Crisis Support

Overview of the Problem-Solving Mental Process

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Rachel Goldman, PhD FTOS, is a licensed psychologist, clinical assistant professor, speaker, wellness expert specializing in eating behaviors, stress management, and health behavior change.

Identify the Problem
Define the Problem
Form a Strategy
Organize Information
Allocate Resources
Monitor Progress
Evaluate the Results

Frequently Asked Questions

Problem-solving is a mental process that involves discovering, analyzing, and solving problems. The ultimate goal of problem-solving is to overcome obstacles and find a solution that best resolves the issue.

The best strategy for solving a problem depends largely on the unique situation. In some cases, people are better off learning everything they can about the issue and then using factual knowledge to come up with a solution. In other instances, creativity and insight are the best options.

It is not necessary to follow problem-solving steps sequentially, It is common to skip steps or even go back through steps multiple times until the desired solution is reached.

In order to correctly solve a problem, it is often important to follow a series of steps. Researchers sometimes refer to this as the problem-solving cycle. While this cycle is portrayed sequentially, people rarely follow a rigid series of steps to find a solution.

The following steps include developing strategies and organizing knowledge.

1. Identifying the Problem

While it may seem like an obvious step, identifying the problem is not always as simple as it sounds. In some cases, people might mistakenly identify the wrong source of a problem, which will make attempts to solve it inefficient or even useless.

Some strategies that you might use to figure out the source of a problem include :

Asking questions about the problem
Breaking the problem down into smaller pieces
Looking at the problem from different perspectives
Conducting research to figure out what relationships exist between different variables

2. Defining the Problem

After the problem has been identified, it is important to fully define the problem so that it can be solved. You can define a problem by operationally defining each aspect of the problem and setting goals for what aspects of the problem you will address

At this point, you should focus on figuring out which aspects of the problems are facts and which are opinions. State the problem clearly and identify the scope of the solution.

3. Forming a Strategy

After the problem has been identified, it is time to start brainstorming potential solutions. This step usually involves generating as many ideas as possible without judging their quality. Once several possibilities have been generated, they can be evaluated and narrowed down.

The next step is to develop a strategy to solve the problem. The approach used will vary depending upon the situation and the individual's unique preferences. Common problem-solving strategies include heuristics and algorithms.

Heuristics are mental shortcuts that are often based on solutions that have worked in the past. They can work well if the problem is similar to something you have encountered before and are often the best choice if you need a fast solution.
Algorithms are step-by-step strategies that are guaranteed to produce a correct result. While this approach is great for accuracy, it can also consume time and resources.

Heuristics are often best used when time is of the essence, while algorithms are a better choice when a decision needs to be as accurate as possible.

4. Organizing Information

Before coming up with a solution, you need to first organize the available information. What do you know about the problem? What do you not know? The more information that is available the better prepared you will be to come up with an accurate solution.

When approaching a problem, it is important to make sure that you have all the data you need. Making a decision without adequate information can lead to biased or inaccurate results.

5. Allocating Resources

Of course, we don't always have unlimited money, time, and other resources to solve a problem. Before you begin to solve a problem, you need to determine how high priority it is.

If it is an important problem, it is probably worth allocating more resources to solving it. If, however, it is a fairly unimportant problem, then you do not want to spend too much of your available resources on coming up with a solution.

At this stage, it is important to consider all of the factors that might affect the problem at hand. This includes looking at the available resources, deadlines that need to be met, and any possible risks involved in each solution. After careful evaluation, a decision can be made about which solution to pursue.

6. Monitoring Progress

After selecting a problem-solving strategy, it is time to put the plan into action and see if it works. This step might involve trying out different solutions to see which one is the most effective.

It is also important to monitor the situation after implementing a solution to ensure that the problem has been solved and that no new problems have arisen as a result of the proposed solution.

Effective problem-solvers tend to monitor their progress as they work towards a solution. If they are not making good progress toward reaching their goal, they will reevaluate their approach or look for new strategies .

7. Evaluating the Results

After a solution has been reached, it is important to evaluate the results to determine if it is the best possible solution to the problem. This evaluation might be immediate, such as checking the results of a math problem to ensure the answer is correct, or it can be delayed, such as evaluating the success of a therapy program after several months of treatment.

Once a problem has been solved, it is important to take some time to reflect on the process that was used and evaluate the results. This will help you to improve your problem-solving skills and become more efficient at solving future problems.

A Word From Verywell

It is important to remember that there are many different problem-solving processes with different steps, and this is just one example. Problem-solving in real-world situations requires a great deal of resourcefulness, flexibility, resilience, and continuous interaction with the environment.

Get Advice From The Verywell Mind Podcast

Hosted by therapist Amy Morin, LCSW, this episode of The Verywell Mind Podcast shares how you can stop dwelling in a negative mindset.

Follow Now : Apple Podcasts / Spotify / Google Podcasts

You can become a better problem solving by:

Practicing brainstorming and coming up with multiple potential solutions to problems
Being open-minded and considering all possible options before making a decision
Breaking down problems into smaller, more manageable pieces
Asking for help when needed
Researching different problem-solving techniques and trying out new ones
Learning from mistakes and using them as opportunities to grow

It's important to communicate openly and honestly with your partner about what's going on. Try to see things from their perspective as well as your own. Work together to find a resolution that works for both of you. Be willing to compromise and accept that there may not be a perfect solution.

Take breaks if things are getting too heated, and come back to the problem when you feel calm and collected. Don't try to fix every problem on your own—consider asking a therapist or counselor for help and insight.

If you've tried everything and there doesn't seem to be a way to fix the problem, you may have to learn to accept it. This can be difficult, but try to focus on the positive aspects of your life and remember that every situation is temporary. Don't dwell on what's going wrong—instead, think about what's going right. Find support by talking to friends or family. Seek professional help if you're having trouble coping.

Davidson JE, Sternberg RJ, editors. The Psychology of Problem Solving . Cambridge University Press; 2003. doi:10.1017/CBO9780511615771

Sarathy V. Real world problem-solving . Front Hum Neurosci . 2018;12:261. Published 2018 Jun 26. doi:10.3389/fnhum.2018.00261

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

35 problem-solving techniques and methods for solving complex problems

Design your next session with SessionLab

Join the 150,000+ facilitators  using SessionLab.

How do you identify problems?

How do you identify the right solution.

Tips for more effective problem-solving

Complete problem-solving methods

Problem-solving techniques to identify and analyze problems
Problem-solving techniques for developing solutions

Problem-solving warm-up activities

Closing activities for a problem-solving process.

Before you can move towards finding the right solution for a given problem, you first need to identify and define the problem you wish to solve.

Here, you want to clearly articulate what the problem is and allow your group to do the same. Remember that everyone in a group is likely to have differing perspectives and alignment is necessary in order to help the group move forward.

Identifying a problem accurately also requires that all members of a group are able to contribute their views in an open and safe manner. It can be scary for people to stand up and contribute, especially if the problems or challenges are emotive or personal in nature. Be sure to try and create a psychologically safe space for these kinds of discussions.

Remember that problem analysis and further discussion are also important. Not taking the time to fully analyze and discuss a challenge can result in the development of solutions that are not fit for purpose or do not address the underlying issue.

Successfully identifying and then analyzing a problem means facilitating a group through activities designed to help them clearly and honestly articulate their thoughts and produce usable insight.

With this data, you might then produce a problem statement that clearly describes the problem you wish to be addressed and also state the goal of any process you undertake to tackle this issue.

Finding solutions is the end goal of any process. Complex organizational challenges can only be solved with an appropriate solution but discovering them requires using the right problem-solving tool.

After you’ve explored a problem and discussed ideas, you need to help a team discuss and choose the right solution. Consensus tools and methods such as those below help a group explore possible solutions before then voting for the best. They’re a great way to tap into the collective intelligence of the group for great results!

Remember that the process is often iterative. Great problem solvers often roadtest a viable solution in a measured way to see what works too. While you might not get the right solution on your first try, the methods below help teams land on the most likely to succeed solution while also holding space for improvement.

Every effective problem solving process begins with an agenda . A well-structured workshop is one of the best methods for successfully guiding a group from exploring a problem to implementing a solution.

In SessionLab, it’s easy to go from an idea to a complete agenda . Start by dragging and dropping your core problem solving activities into place . Add timings, breaks and necessary materials before sharing your agenda with your colleagues.

The resulting agenda will be your guide to an effective and productive problem solving session that will also help you stay organized on the day!

Tips for more effective problem solving

Problem-solving activities are only one part of the puzzle. While a great method can help unlock your team’s ability to solve problems, without a thoughtful approach and strong facilitation the solutions may not be fit for purpose.

Let’s take a look at some problem-solving tips you can apply to any process to help it be a success!

Clearly define the problem

Jumping straight to solutions can be tempting, though without first clearly articulating a problem, the solution might not be the right one. Many of the problem-solving activities below include sections where the problem is explored and clearly defined before moving on.

This is a vital part of the problem-solving process and taking the time to fully define an issue can save time and effort later. A clear definition helps identify irrelevant information and it also ensures that your team sets off on the right track.

Don’t jump to conclusions

It’s easy for groups to exhibit cognitive bias or have preconceived ideas about both problems and potential solutions. Be sure to back up any problem statements or potential solutions with facts, research, and adequate forethought.

The best techniques ask participants to be methodical and challenge preconceived notions. Make sure you give the group enough time and space to collect relevant information and consider the problem in a new way. By approaching the process with a clear, rational mindset, you’ll often find that better solutions are more forthcoming.

Try different approaches

Problems come in all shapes and sizes and so too should the methods you use to solve them. If you find that one approach isn’t yielding results and your team isn’t finding different solutions, try mixing it up. You’ll be surprised at how using a new creative activity can unblock your team and generate great solutions.

Don’t take it personally

Depending on the nature of your team or organizational problems, it’s easy for conversations to get heated. While it’s good for participants to be engaged in the discussions, ensure that emotions don’t run too high and that blame isn’t thrown around while finding solutions.

You’re all in it together, and even if your team or area is seeing problems, that isn’t necessarily a disparagement of you personally. Using facilitation skills to manage group dynamics is one effective method of helping conversations be more constructive.

Get the right people in the room

Your problem-solving method is often only as effective as the group using it. Getting the right people on the job and managing the number of people present is important too!

If the group is too small, you may not get enough different perspectives to effectively solve a problem. If the group is too large, you can go round and round during the ideation stages.

Creating the right group makeup is also important in ensuring you have the necessary expertise and skillset to both identify and follow up on potential solutions. Carefully consider who to include at each stage to help ensure your problem-solving method is followed and positioned for success.

Document everything

The best solutions can take refinement, iteration, and reflection to come out. Get into a habit of documenting your process in order to keep all the learnings from the session and to allow ideas to mature and develop. Many of the methods below involve the creation of documents or shared resources. Be sure to keep and share these so everyone can benefit from the work done!

Bring a facilitator

Facilitation is all about making group processes easier. With a subject as potentially emotive and important as problem-solving, having an impartial third party in the form of a facilitator can make all the difference in finding great solutions and keeping the process moving. Consider bringing a facilitator to your problem-solving session to get better results and generate meaningful solutions!

Develop your problem-solving skills

It takes time and practice to be an effective problem solver. While some roles or participants might more naturally gravitate towards problem-solving, it can take development and planning to help everyone create better solutions.

You might develop a training program, run a problem-solving workshop or simply ask your team to practice using the techniques below. Check out our post on problem-solving skills to see how you and your group can develop the right mental process and be more resilient to issues too!

Design a great agenda

Workshops are a great format for solving problems. With the right approach, you can focus a group and help them find the solutions to their own problems. But designing a process can be time-consuming and finding the right activities can be difficult.

Check out our workshop planning guide to level-up your agenda design and start running more effective workshops. Need inspiration? Check out templates designed by expert facilitators to help you kickstart your process!

In this section, we’ll look at in-depth problem-solving methods that provide a complete end-to-end process for developing effective solutions. These will help guide your team from the discovery and definition of a problem through to delivering the right solution.

If you’re looking for an all-encompassing method or problem-solving model, these processes are a great place to start. They’ll ask your team to challenge preconceived ideas and adopt a mindset for solving problems more effectively.

Six Thinking Hats
Lightning Decision Jam
Problem Definition Process
Discovery & Action Dialogue

Design Sprint 2.0

Open Space Technology

1. Six Thinking Hats

Individual approaches to solving a problem can be very different based on what team or role an individual holds. It can be easy for existing biases or perspectives to find their way into the mix, or for internal politics to direct a conversation.

Six Thinking Hats is a classic method for identifying the problems that need to be solved and enables your team to consider them from different angles, whether that is by focusing on facts and data, creative solutions, or by considering why a particular solution might not work.

Like all problem-solving frameworks, Six Thinking Hats is effective at helping teams remove roadblocks from a conversation or discussion and come to terms with all the aspects necessary to solve complex problems.

2. Lightning Decision Jam

Featured courtesy of Jonathan Courtney of AJ&Smart Berlin, Lightning Decision Jam is one of those strategies that should be in every facilitation toolbox. Exploring problems and finding solutions is often creative in nature, though as with any creative process, there is the potential to lose focus and get lost.

Unstructured discussions might get you there in the end, but it’s much more effective to use a method that creates a clear process and team focus.

In Lightning Decision Jam, participants are invited to begin by writing challenges, concerns, or mistakes on post-its without discussing them before then being invited by the moderator to present them to the group.

From there, the team vote on which problems to solve and are guided through steps that will allow them to reframe those problems, create solutions and then decide what to execute on.

By deciding the problems that need to be solved as a team before moving on, this group process is great for ensuring the whole team is aligned and can take ownership over the next stages.

Lightning Decision Jam (LDJ) #action #decision making #problem solving #issue analysis #innovation #design #remote-friendly The problem with anything that requires creative thinking is that it’s easy to get lost—lose focus and fall into the trap of having useless, open-ended, unstructured discussions. Here’s the most effective solution I’ve found: Replace all open, unstructured discussion with a clear process. What to use this exercise for: Anything which requires a group of people to make decisions, solve problems or discuss challenges. It’s always good to frame an LDJ session with a broad topic, here are some examples: The conversion flow of our checkout Our internal design process How we organise events Keeping up with our competition Improving sales flow

3. Problem Definition Process

While problems can be complex, the problem-solving methods you use to identify and solve those problems can often be simple in design.

By taking the time to truly identify and define a problem before asking the group to reframe the challenge as an opportunity, this method is a great way to enable change.

Begin by identifying a focus question and exploring the ways in which it manifests before splitting into five teams who will each consider the problem using a different method: escape, reversal, exaggeration, distortion or wishful. Teams develop a problem objective and create ideas in line with their method before then feeding them back to the group.

This method is great for enabling in-depth discussions while also creating space for finding creative solutions too!

Problem Definition #problem solving #idea generation #creativity #online #remote-friendly A problem solving technique to define a problem, challenge or opportunity and to generate ideas.

4. The 5 Whys

Sometimes, a group needs to go further with their strategies and analyze the root cause at the heart of organizational issues. An RCA or root cause analysis is the process of identifying what is at the heart of business problems or recurring challenges.

The 5 Whys is a simple and effective method of helping a group go find the root cause of any problem or challenge and conduct analysis that will deliver results.

By beginning with the creation of a problem statement and going through five stages to refine it, The 5 Whys provides everything you need to truly discover the cause of an issue.

The 5 Whys #hyperisland #innovation This simple and powerful method is useful for getting to the core of a problem or challenge. As the title suggests, the group defines a problems, then asks the question “why” five times, often using the resulting explanation as a starting point for creative problem solving.

5. World Cafe

World Cafe is a simple but powerful facilitation technique to help bigger groups to focus their energy and attention on solving complex problems.

World Cafe enables this approach by creating a relaxed atmosphere where participants are able to self-organize and explore topics relevant and important to them which are themed around a central problem-solving purpose. Create the right atmosphere by modeling your space after a cafe and after guiding the group through the method, let them take the lead!

Making problem-solving a part of your organization’s culture in the long term can be a difficult undertaking. More approachable formats like World Cafe can be especially effective in bringing people unfamiliar with workshops into the fold.

World Cafe #hyperisland #innovation #issue analysis World Café is a simple yet powerful method, originated by Juanita Brown, for enabling meaningful conversations driven completely by participants and the topics that are relevant and important to them. Facilitators create a cafe-style space and provide simple guidelines. Participants then self-organize and explore a set of relevant topics or questions for conversation.

6. Discovery & Action Dialogue (DAD)

One of the best approaches is to create a safe space for a group to share and discover practices and behaviors that can help them find their own solutions.

With DAD, you can help a group choose which problems they wish to solve and which approaches they will take to do so. It’s great at helping remove resistance to change and can help get buy-in at every level too!

This process of enabling frontline ownership is great in ensuring follow-through and is one of the methods you will want in your toolbox as a facilitator.

Discovery & Action Dialogue (DAD) #idea generation #liberating structures #action #issue analysis #remote-friendly DADs make it easy for a group or community to discover practices and behaviors that enable some individuals (without access to special resources and facing the same constraints) to find better solutions than their peers to common problems. These are called positive deviant (PD) behaviors and practices. DADs make it possible for people in the group, unit, or community to discover by themselves these PD practices. DADs also create favorable conditions for stimulating participants’ creativity in spaces where they can feel safe to invent new and more effective practices. Resistance to change evaporates as participants are unleashed to choose freely which practices they will adopt or try and which problems they will tackle. DADs make it possible to achieve frontline ownership of solutions.

7. Design Sprint 2.0

Want to see how a team can solve big problems and move forward with prototyping and testing solutions in a few days? The Design Sprint 2.0 template from Jake Knapp, author of Sprint, is a complete agenda for a with proven results.

Developing the right agenda can involve difficult but necessary planning. Ensuring all the correct steps are followed can also be stressful or time-consuming depending on your level of experience.

Use this complete 4-day workshop template if you are finding there is no obvious solution to your challenge and want to focus your team around a specific problem that might require a shortcut to launching a minimum viable product or waiting for the organization-wide implementation of a solution.

8. Open space technology

Open space technology- developed by Harrison Owen – creates a space where large groups are invited to take ownership of their problem solving and lead individual sessions. Open space technology is a great format when you have a great deal of expertise and insight in the room and want to allow for different takes and approaches on a particular theme or problem you need to be solved.

Start by bringing your participants together to align around a central theme and focus their efforts. Explain the ground rules to help guide the problem-solving process and then invite members to identify any issue connecting to the central theme that they are interested in and are prepared to take responsibility for.

Once participants have decided on their approach to the core theme, they write their issue on a piece of paper, announce it to the group, pick a session time and place, and post the paper on the wall. As the wall fills up with sessions, the group is then invited to join the sessions that interest them the most and which they can contribute to, then you’re ready to begin!

Everyone joins the problem-solving group they’ve signed up to, record the discussion and if appropriate, findings can then be shared with the rest of the group afterward.

Open Space Technology #action plan #idea generation #problem solving #issue analysis #large group #online #remote-friendly Open Space is a methodology for large groups to create their agenda discerning important topics for discussion, suitable for conferences, community gatherings and whole system facilitation

Techniques to identify and analyze problems

Using a problem-solving method to help a team identify and analyze a problem can be a quick and effective addition to any workshop or meeting.

While further actions are always necessary, you can generate momentum and alignment easily, and these activities are a great place to get started.

We’ve put together this list of techniques to help you and your team with problem identification, analysis, and discussion that sets the foundation for developing effective solutions.

Let’s take a look!

The Creativity Dice
Fishbone Analysis
Problem Tree
SWOT Analysis
Agreement-Certainty Matrix
The Journalistic Six
LEGO Challenge
What, So What, Now What?
Journalists

Individual and group perspectives are incredibly important, but what happens if people are set in their minds and need a change of perspective in order to approach a problem more effectively?

Flip It is a method we love because it is both simple to understand and run, and allows groups to understand how their perspectives and biases are formed.

Participants in Flip It are first invited to consider concerns, issues, or problems from a perspective of fear and write them on a flip chart. Then, the group is asked to consider those same issues from a perspective of hope and flip their understanding.

No problem and solution is free from existing bias and by changing perspectives with Flip It, you can then develop a problem solving model quickly and effectively.

Flip It! #gamestorming #problem solving #action Often, a change in a problem or situation comes simply from a change in our perspectives. Flip It! is a quick game designed to show players that perspectives are made, not born.

10. The Creativity Dice

One of the most useful problem solving skills you can teach your team is of approaching challenges with creativity, flexibility, and openness. Games like The Creativity Dice allow teams to overcome the potential hurdle of too much linear thinking and approach the process with a sense of fun and speed.

In The Creativity Dice, participants are organized around a topic and roll a dice to determine what they will work on for a period of 3 minutes at a time. They might roll a 3 and work on investigating factual information on the chosen topic. They might roll a 1 and work on identifying the specific goals, standards, or criteria for the session.

Encouraging rapid work and iteration while asking participants to be flexible are great skills to cultivate. Having a stage for idea incubation in this game is also important. Moments of pause can help ensure the ideas that are put forward are the most suitable.

The Creativity Dice #creativity #problem solving #thiagi #issue analysis Too much linear thinking is hazardous to creative problem solving. To be creative, you should approach the problem (or the opportunity) from different points of view. You should leave a thought hanging in mid-air and move to another. This skipping around prevents premature closure and lets your brain incubate one line of thought while you consciously pursue another.

11. Fishbone Analysis

Organizational or team challenges are rarely simple, and it’s important to remember that one problem can be an indication of something that goes deeper and may require further consideration to be solved.

Fishbone Analysis helps groups to dig deeper and understand the origins of a problem. It’s a great example of a root cause analysis method that is simple for everyone on a team to get their head around.

Participants in this activity are asked to annotate a diagram of a fish, first adding the problem or issue to be worked on at the head of a fish before then brainstorming the root causes of the problem and adding them as bones on the fish.

Using abstractions such as a diagram of a fish can really help a team break out of their regular thinking and develop a creative approach.

Fishbone Analysis #problem solving ##root cause analysis #decision making #online facilitation A process to help identify and understand the origins of problems, issues or observations.

12. Problem Tree

Encouraging visual thinking can be an essential part of many strategies. By simply reframing and clarifying problems, a group can move towards developing a problem solving model that works for them.

In Problem Tree, groups are asked to first brainstorm a list of problems – these can be design problems, team problems or larger business problems – and then organize them into a hierarchy. The hierarchy could be from most important to least important or abstract to practical, though the key thing with problem solving games that involve this aspect is that your group has some way of managing and sorting all the issues that are raised.

Once you have a list of problems that need to be solved and have organized them accordingly, you’re then well-positioned for the next problem solving steps.

Problem tree #define intentions #create #design #issue analysis A problem tree is a tool to clarify the hierarchy of problems addressed by the team within a design project; it represents high level problems or related sublevel problems.

13. SWOT Analysis

Chances are you’ve heard of the SWOT Analysis before. This problem-solving method focuses on identifying strengths, weaknesses, opportunities, and threats is a tried and tested method for both individuals and teams.

Start by creating a desired end state or outcome and bare this in mind – any process solving model is made more effective by knowing what you are moving towards. Create a quadrant made up of the four categories of a SWOT analysis and ask participants to generate ideas based on each of those quadrants.

Once you have those ideas assembled in their quadrants, cluster them together based on their affinity with other ideas. These clusters are then used to facilitate group conversations and move things forward.

SWOT analysis #gamestorming #problem solving #action #meeting facilitation The SWOT Analysis is a long-standing technique of looking at what we have, with respect to the desired end state, as well as what we could improve on. It gives us an opportunity to gauge approaching opportunities and dangers, and assess the seriousness of the conditions that affect our future. When we understand those conditions, we can influence what comes next.

14. Agreement-Certainty Matrix

Not every problem-solving approach is right for every challenge, and deciding on the right method for the challenge at hand is a key part of being an effective team.

The Agreement Certainty matrix helps teams align on the nature of the challenges facing them. By sorting problems from simple to chaotic, your team can understand what methods are suitable for each problem and what they can do to ensure effective results.

If you are already using Liberating Structures techniques as part of your problem-solving strategy, the Agreement-Certainty Matrix can be an invaluable addition to your process. We’ve found it particularly if you are having issues with recurring problems in your organization and want to go deeper in understanding the root cause.

Agreement-Certainty Matrix #issue analysis #liberating structures #problem solving You can help individuals or groups avoid the frequent mistake of trying to solve a problem with methods that are not adapted to the nature of their challenge. The combination of two questions makes it possible to easily sort challenges into four categories: simple, complicated, complex , and chaotic . A problem is simple when it can be solved reliably with practices that are easy to duplicate. It is complicated when experts are required to devise a sophisticated solution that will yield the desired results predictably. A problem is complex when there are several valid ways to proceed but outcomes are not predictable in detail. Chaotic is when the context is too turbulent to identify a path forward. A loose analogy may be used to describe these differences: simple is like following a recipe, complicated like sending a rocket to the moon, complex like raising a child, and chaotic is like the game “Pin the Tail on the Donkey.” The Liberating Structures Matching Matrix in Chapter 5 can be used as the first step to clarify the nature of a challenge and avoid the mismatches between problems and solutions that are frequently at the root of chronic, recurring problems.

Organizing and charting a team’s progress can be important in ensuring its success. SQUID (Sequential Question and Insight Diagram) is a great model that allows a team to effectively switch between giving questions and answers and develop the skills they need to stay on track throughout the process.

Begin with two different colored sticky notes – one for questions and one for answers – and with your central topic (the head of the squid) on the board. Ask the group to first come up with a series of questions connected to their best guess of how to approach the topic. Ask the group to come up with answers to those questions, fix them to the board and connect them with a line. After some discussion, go back to question mode by responding to the generated answers or other points on the board.

It’s rewarding to see a diagram grow throughout the exercise, and a completed SQUID can provide a visual resource for future effort and as an example for other teams.

SQUID #gamestorming #project planning #issue analysis #problem solving When exploring an information space, it’s important for a group to know where they are at any given time. By using SQUID, a group charts out the territory as they go and can navigate accordingly. SQUID stands for Sequential Question and Insight Diagram.

16. Speed Boat

To continue with our nautical theme, Speed Boat is a short and sweet activity that can help a team quickly identify what employees, clients or service users might have a problem with and analyze what might be standing in the way of achieving a solution.

Methods that allow for a group to make observations, have insights and obtain those eureka moments quickly are invaluable when trying to solve complex problems.

In Speed Boat, the approach is to first consider what anchors and challenges might be holding an organization (or boat) back. Bonus points if you are able to identify any sharks in the water and develop ideas that can also deal with competitors!

Speed Boat #gamestorming #problem solving #action Speedboat is a short and sweet way to identify what your employees or clients don’t like about your product/service or what’s standing in the way of a desired goal.

17. The Journalistic Six

Some of the most effective ways of solving problems is by encouraging teams to be more inclusive and diverse in their thinking.

Based on the six key questions journalism students are taught to answer in articles and news stories, The Journalistic Six helps create teams to see the whole picture. By using who, what, when, where, why, and how to facilitate the conversation and encourage creative thinking, your team can make sure that the problem identification and problem analysis stages of the are covered exhaustively and thoughtfully. Reporter’s notebook and dictaphone optional.

The Journalistic Six – Who What When Where Why How #idea generation #issue analysis #problem solving #online #creative thinking #remote-friendly A questioning method for generating, explaining, investigating ideas.

18. LEGO Challenge

Now for an activity that is a little out of the (toy) box. LEGO Serious Play is a facilitation methodology that can be used to improve creative thinking and problem-solving skills.

The LEGO Challenge includes giving each member of the team an assignment that is hidden from the rest of the group while they create a structure without speaking.

What the LEGO challenge brings to the table is a fun working example of working with stakeholders who might not be on the same page to solve problems. Also, it’s LEGO! Who doesn’t love LEGO!

LEGO Challenge #hyperisland #team A team-building activity in which groups must work together to build a structure out of LEGO, but each individual has a secret “assignment” which makes the collaborative process more challenging. It emphasizes group communication, leadership dynamics, conflict, cooperation, patience and problem solving strategy.

19. What, So What, Now What?

If not carefully managed, the problem identification and problem analysis stages of the problem-solving process can actually create more problems and misunderstandings.

The What, So What, Now What? problem-solving activity is designed to help collect insights and move forward while also eliminating the possibility of disagreement when it comes to identifying, clarifying, and analyzing organizational or work problems.

Facilitation is all about bringing groups together so that might work on a shared goal and the best problem-solving strategies ensure that teams are aligned in purpose, if not initially in opinion or insight.

Throughout the three steps of this game, you give everyone on a team to reflect on a problem by asking what happened, why it is important, and what actions should then be taken.

This can be a great activity for bringing our individual perceptions about a problem or challenge and contextualizing it in a larger group setting. This is one of the most important problem-solving skills you can bring to your organization.

W³ – What, So What, Now What? #issue analysis #innovation #liberating structures You can help groups reflect on a shared experience in a way that builds understanding and spurs coordinated action while avoiding unproductive conflict. It is possible for every voice to be heard while simultaneously sifting for insights and shaping new direction. Progressing in stages makes this practical—from collecting facts about What Happened to making sense of these facts with So What and finally to what actions logically follow with Now What . The shared progression eliminates most of the misunderstandings that otherwise fuel disagreements about what to do. Voila!

20. Journalists

Problem analysis can be one of the most important and decisive stages of all problem-solving tools. Sometimes, a team can become bogged down in the details and are unable to move forward.

Journalists is an activity that can avoid a group from getting stuck in the problem identification or problem analysis stages of the process.

In Journalists, the group is invited to draft the front page of a fictional newspaper and figure out what stories deserve to be on the cover and what headlines those stories will have. By reframing how your problems and challenges are approached, you can help a team move productively through the process and be better prepared for the steps to follow.

Journalists #vision #big picture #issue analysis #remote-friendly This is an exercise to use when the group gets stuck in details and struggles to see the big picture. Also good for defining a vision.

Problem-solving techniques for developing solutions

The success of any problem-solving process can be measured by the solutions it produces. After you’ve defined the issue, explored existing ideas, and ideated, it’s time to narrow down to the correct solution.

Use these problem-solving techniques when you want to help your team find consensus, compare possible solutions, and move towards taking action on a particular problem.

Improved Solutions
Four-Step Sketch
15% Solutions
How-Now-Wow matrix
Impact Effort Matrix

21. Mindspin

Brainstorming is part of the bread and butter of the problem-solving process and all problem-solving strategies benefit from getting ideas out and challenging a team to generate solutions quickly.

With Mindspin, participants are encouraged not only to generate ideas but to do so under time constraints and by slamming down cards and passing them on. By doing multiple rounds, your team can begin with a free generation of possible solutions before moving on to developing those solutions and encouraging further ideation.

This is one of our favorite problem-solving activities and can be great for keeping the energy up throughout the workshop. Remember the importance of helping people become engaged in the process – energizing problem-solving techniques like Mindspin can help ensure your team stays engaged and happy, even when the problems they’re coming together to solve are complex.

MindSpin #teampedia #idea generation #problem solving #action A fast and loud method to enhance brainstorming within a team. Since this activity has more than round ideas that are repetitive can be ruled out leaving more creative and innovative answers to the challenge.

22. Improved Solutions

After a team has successfully identified a problem and come up with a few solutions, it can be tempting to call the work of the problem-solving process complete. That said, the first solution is not necessarily the best, and by including a further review and reflection activity into your problem-solving model, you can ensure your group reaches the best possible result.

One of a number of problem-solving games from Thiagi Group, Improved Solutions helps you go the extra mile and develop suggested solutions with close consideration and peer review. By supporting the discussion of several problems at once and by shifting team roles throughout, this problem-solving technique is a dynamic way of finding the best solution.

Improved Solutions #creativity #thiagi #problem solving #action #team You can improve any solution by objectively reviewing its strengths and weaknesses and making suitable adjustments. In this creativity framegame, you improve the solutions to several problems. To maintain objective detachment, you deal with a different problem during each of six rounds and assume different roles (problem owner, consultant, basher, booster, enhancer, and evaluator) during each round. At the conclusion of the activity, each player ends up with two solutions to her problem.

23. Four Step Sketch

Creative thinking and visual ideation does not need to be confined to the opening stages of your problem-solving strategies. Exercises that include sketching and prototyping on paper can be effective at the solution finding and development stage of the process, and can be great for keeping a team engaged.

By going from simple notes to a crazy 8s round that involves rapidly sketching 8 variations on their ideas before then producing a final solution sketch, the group is able to iterate quickly and visually. Problem-solving techniques like Four-Step Sketch are great if you have a group of different thinkers and want to change things up from a more textual or discussion-based approach.

Four-Step Sketch #design sprint #innovation #idea generation #remote-friendly The four-step sketch is an exercise that helps people to create well-formed concepts through a structured process that includes: Review key information Start design work on paper, Consider multiple variations , Create a detailed solution . This exercise is preceded by a set of other activities allowing the group to clarify the challenge they want to solve. See how the Four Step Sketch exercise fits into a Design Sprint

24. 15% Solutions

Some problems are simpler than others and with the right problem-solving activities, you can empower people to take immediate actions that can help create organizational change.

Part of the liberating structures toolkit, 15% solutions is a problem-solving technique that focuses on finding and implementing solutions quickly. A process of iterating and making small changes quickly can help generate momentum and an appetite for solving complex problems.

Problem-solving strategies can live and die on whether people are onboard. Getting some quick wins is a great way of getting people behind the process.

It can be extremely empowering for a team to realize that problem-solving techniques can be deployed quickly and easily and delineate between things they can positively impact and those things they cannot change.

15% Solutions #action #liberating structures #remote-friendly You can reveal the actions, however small, that everyone can do immediately. At a minimum, these will create momentum, and that may make a BIG difference. 15% Solutions show that there is no reason to wait around, feel powerless, or fearful. They help people pick it up a level. They get individuals and the group to focus on what is within their discretion instead of what they cannot change. With a very simple question, you can flip the conversation to what can be done and find solutions to big problems that are often distributed widely in places not known in advance. Shifting a few grains of sand may trigger a landslide and change the whole landscape.

25. How-Now-Wow Matrix

The problem-solving process is often creative, as complex problems usually require a change of thinking and creative response in order to find the best solutions. While it’s common for the first stages to encourage creative thinking, groups can often gravitate to familiar solutions when it comes to the end of the process.

When selecting solutions, you don’t want to lose your creative energy! The How-Now-Wow Matrix from Gamestorming is a great problem-solving activity that enables a group to stay creative and think out of the box when it comes to selecting the right solution for a given problem.

Problem-solving techniques that encourage creative thinking and the ideation and selection of new solutions can be the most effective in organisational change. Give the How-Now-Wow Matrix a go, and not just for how pleasant it is to say out loud.

How-Now-Wow Matrix #gamestorming #idea generation #remote-friendly When people want to develop new ideas, they most often think out of the box in the brainstorming or divergent phase. However, when it comes to convergence, people often end up picking ideas that are most familiar to them. This is called a ‘creative paradox’ or a ‘creadox’. The How-Now-Wow matrix is an idea selection tool that breaks the creadox by forcing people to weigh each idea on 2 parameters.

26. Impact and Effort Matrix

All problem-solving techniques hope to not only find solutions to a given problem or challenge but to find the best solution. When it comes to finding a solution, groups are invited to put on their decision-making hats and really think about how a proposed idea would work in practice.

The Impact and Effort Matrix is one of the problem-solving techniques that fall into this camp, empowering participants to first generate ideas and then categorize them into a 2×2 matrix based on impact and effort.

Activities that invite critical thinking while remaining simple are invaluable. Use the Impact and Effort Matrix to move from ideation and towards evaluating potential solutions before then committing to them.

Impact and Effort Matrix #gamestorming #decision making #action #remote-friendly In this decision-making exercise, possible actions are mapped based on two factors: effort required to implement and potential impact. Categorizing ideas along these lines is a useful technique in decision making, as it obliges contributors to balance and evaluate suggested actions before committing to them.

27. Dotmocracy

If you’ve followed each of the problem-solving steps with your group successfully, you should move towards the end of your process with heaps of possible solutions developed with a specific problem in mind. But how do you help a group go from ideation to putting a solution into action?

Dotmocracy – or Dot Voting -is a tried and tested method of helping a team in the problem-solving process make decisions and put actions in place with a degree of oversight and consensus.

One of the problem-solving techniques that should be in every facilitator’s toolbox, Dot Voting is fast and effective and can help identify the most popular and best solutions and help bring a group to a decision effectively.

Dotmocracy #action #decision making #group prioritization #hyperisland #remote-friendly Dotmocracy is a simple method for group prioritization or decision-making. It is not an activity on its own, but a method to use in processes where prioritization or decision-making is the aim. The method supports a group to quickly see which options are most popular or relevant. The options or ideas are written on post-its and stuck up on a wall for the whole group to see. Each person votes for the options they think are the strongest, and that information is used to inform a decision.

All facilitators know that warm-ups and icebreakers are useful for any workshop or group process. Problem-solving workshops are no different.

Use these problem-solving techniques to warm up a group and prepare them for the rest of the process. Activating your group by tapping into some of the top problem-solving skills can be one of the best ways to see great outcomes from your session.

Check-in/Check-out
Doodling Together
Show and Tell
Constellations
Draw a Tree

28. Check-in / Check-out

Solid processes are planned from beginning to end, and the best facilitators know that setting the tone and establishing a safe, open environment can be integral to a successful problem-solving process.

Check-in / Check-out is a great way to begin and/or bookend a problem-solving workshop. Checking in to a session emphasizes that everyone will be seen, heard, and expected to contribute.

If you are running a series of meetings, setting a consistent pattern of checking in and checking out can really help your team get into a groove. We recommend this opening-closing activity for small to medium-sized groups though it can work with large groups if they’re disciplined!

Check-in / Check-out #team #opening #closing #hyperisland #remote-friendly Either checking-in or checking-out is a simple way for a team to open or close a process, symbolically and in a collaborative way. Checking-in/out invites each member in a group to be present, seen and heard, and to express a reflection or a feeling. Checking-in emphasizes presence, focus and group commitment; checking-out emphasizes reflection and symbolic closure.

29. Doodling Together

Thinking creatively and not being afraid to make suggestions are important problem-solving skills for any group or team, and warming up by encouraging these behaviors is a great way to start.

Doodling Together is one of our favorite creative ice breaker games – it’s quick, effective, and fun and can make all following problem-solving steps easier by encouraging a group to collaborate visually. By passing cards and adding additional items as they go, the workshop group gets into a groove of co-creation and idea development that is crucial to finding solutions to problems.

Doodling Together #collaboration #creativity #teamwork #fun #team #visual methods #energiser #icebreaker #remote-friendly Create wild, weird and often funny postcards together & establish a group’s creative confidence.

30. Show and Tell

You might remember some version of Show and Tell from being a kid in school and it’s a great problem-solving activity to kick off a session.

Asking participants to prepare a little something before a workshop by bringing an object for show and tell can help them warm up before the session has even begun! Games that include a physical object can also help encourage early engagement before moving onto more big-picture thinking.

By asking your participants to tell stories about why they chose to bring a particular item to the group, you can help teams see things from new perspectives and see both differences and similarities in the way they approach a topic. Great groundwork for approaching a problem-solving process as a team!

Show and Tell #gamestorming #action #opening #meeting facilitation Show and Tell taps into the power of metaphors to reveal players’ underlying assumptions and associations around a topic The aim of the game is to get a deeper understanding of stakeholders’ perspectives on anything—a new project, an organizational restructuring, a shift in the company’s vision or team dynamic.

31. Constellations

Who doesn’t love stars? Constellations is a great warm-up activity for any workshop as it gets people up off their feet, energized, and ready to engage in new ways with established topics. It’s also great for showing existing beliefs, biases, and patterns that can come into play as part of your session.

Using warm-up games that help build trust and connection while also allowing for non-verbal responses can be great for easing people into the problem-solving process and encouraging engagement from everyone in the group. Constellations is great in large spaces that allow for movement and is definitely a practical exercise to allow the group to see patterns that are otherwise invisible.

Constellations #trust #connection #opening #coaching #patterns #system Individuals express their response to a statement or idea by standing closer or further from a central object. Used with teams to reveal system, hidden patterns, perspectives.

32. Draw a Tree

Problem-solving games that help raise group awareness through a central, unifying metaphor can be effective ways to warm-up a group in any problem-solving model.

Draw a Tree is a simple warm-up activity you can use in any group and which can provide a quick jolt of energy. Start by asking your participants to draw a tree in just 45 seconds – they can choose whether it will be abstract or realistic.

Once the timer is up, ask the group how many people included the roots of the tree and use this as a means to discuss how we can ignore important parts of any system simply because they are not visible.

All problem-solving strategies are made more effective by thinking of problems critically and by exposing things that may not normally come to light. Warm-up games like Draw a Tree are great in that they quickly demonstrate some key problem-solving skills in an accessible and effective way.

Draw a Tree #thiagi #opening #perspectives #remote-friendly With this game you can raise awarness about being more mindful, and aware of the environment we live in.

Each step of the problem-solving workshop benefits from an intelligent deployment of activities, games, and techniques. Bringing your session to an effective close helps ensure that solutions are followed through on and that you also celebrate what has been achieved.

Here are some problem-solving activities you can use to effectively close a workshop or meeting and ensure the great work you’ve done can continue afterward.

One Breath Feedback
Who What When Matrix
Response Cards

How do I conclude a problem-solving process?

All good things must come to an end. With the bulk of the work done, it can be tempting to conclude your workshop swiftly and without a moment to debrief and align. This can be problematic in that it doesn’t allow your team to fully process the results or reflect on the process.

At the end of an effective session, your team will have gone through a process that, while productive, can be exhausting. It’s important to give your group a moment to take a breath, ensure that they are clear on future actions, and provide short feedback before leaving the space.

The primary purpose of any problem-solving method is to generate solutions and then implement them. Be sure to take the opportunity to ensure everyone is aligned and ready to effectively implement the solutions you produced in the workshop.

Remember that every process can be improved and by giving a short moment to collect feedback in the session, you can further refine your problem-solving methods and see further success in the future too.

33. One Breath Feedback

Maintaining attention and focus during the closing stages of a problem-solving workshop can be tricky and so being concise when giving feedback can be important. It’s easy to incur “death by feedback” should some team members go on for too long sharing their perspectives in a quick feedback round.

One Breath Feedback is a great closing activity for workshops. You give everyone an opportunity to provide feedback on what they’ve done but only in the space of a single breath. This keeps feedback short and to the point and means that everyone is encouraged to provide the most important piece of feedback to them.

One breath feedback #closing #feedback #action This is a feedback round in just one breath that excels in maintaining attention: each participants is able to speak during just one breath … for most people that’s around 20 to 25 seconds … unless of course you’ve been a deep sea diver in which case you’ll be able to do it for longer.

34. Who What When Matrix

Matrices feature as part of many effective problem-solving strategies and with good reason. They are easily recognizable, simple to use, and generate results.

The Who What When Matrix is a great tool to use when closing your problem-solving session by attributing a who, what and when to the actions and solutions you have decided upon. The resulting matrix is a simple, easy-to-follow way of ensuring your team can move forward.

Great solutions can’t be enacted without action and ownership. Your problem-solving process should include a stage for allocating tasks to individuals or teams and creating a realistic timeframe for those solutions to be implemented or checked out. Use this method to keep the solution implementation process clear and simple for all involved.

Who/What/When Matrix #gamestorming #action #project planning With Who/What/When matrix, you can connect people with clear actions they have defined and have committed to.

35. Response cards

Group discussion can comprise the bulk of most problem-solving activities and by the end of the process, you might find that your team is talked out!

Providing a means for your team to give feedback with short written notes can ensure everyone is head and can contribute without the need to stand up and talk. Depending on the needs of the group, giving an alternative can help ensure everyone can contribute to your problem-solving model in the way that makes the most sense for them.

Response Cards is a great way to close a workshop if you are looking for a gentle warm-down and want to get some swift discussion around some of the feedback that is raised.

Response Cards #debriefing #closing #structured sharing #questions and answers #thiagi #action It can be hard to involve everyone during a closing of a session. Some might stay in the background or get unheard because of louder participants. However, with the use of Response Cards, everyone will be involved in providing feedback or clarify questions at the end of a session.

Save time and effort discovering the right solutions

A structured problem solving process is a surefire way of solving tough problems, discovering creative solutions and driving organizational change. But how can you design for successful outcomes?

With SessionLab, it’s easy to design engaging workshops that deliver results. Drag, drop and reorder blocks to build your agenda. When you make changes or update your agenda, your session timing adjusts automatically , saving you time on manual adjustments.

Collaborating with stakeholders or clients? Share your agenda with a single click and collaborate in real-time. No more sending documents back and forth over email.

Explore how to use SessionLab to design effective problem solving workshops or watch this five minute video to see the planner in action!

Over to you

The problem-solving process can often be as complicated and multifaceted as the problems they are set-up to solve. With the right problem-solving techniques and a mix of creative exercises designed to guide discussion and generate purposeful ideas, we hope we’ve given you the tools to find the best solutions as simply and easily as possible.

Is there a problem-solving technique that you are missing here? Do you have a favorite activity or method you use when facilitating? Let us know in the comments below, we’d love to hear from you!

thank you very much for these excellent techniques

Certainly wonderful article, very detailed. Shared!

Your list of techniques for problem solving can be helpfully extended by adding TRIZ to the list of techniques. TRIZ has 40 problem solving techniques derived from methods inventros and patent holders used to get new patents. About 10-12 are general approaches. many organization sponsor classes in TRIZ that are used to solve business problems or general organiztational problems. You can take a look at TRIZ and dwonload a free internet booklet to see if you feel it shound be included per your selection process.

Design your next workshop with SessionLab

Join the 150,000 facilitators using SessionLab

What is Problem Solving? (Steps, Techniques, Examples)

By Status.net Editorial Team on May 7, 2023 — 5 minutes to read

What Is Problem Solving?

Definition and importance.

Problem solving is the process of finding solutions to obstacles or challenges you encounter in your life or work. It is a crucial skill that allows you to tackle complex situations, adapt to changes, and overcome difficulties with ease. Mastering this ability will contribute to both your personal and professional growth, leading to more successful outcomes and better decision-making.

Problem-Solving Steps

The problem-solving process typically includes the following steps:

Identify the issue : Recognize the problem that needs to be solved.
Analyze the situation : Examine the issue in depth, gather all relevant information, and consider any limitations or constraints that may be present.
Generate potential solutions : Brainstorm a list of possible solutions to the issue, without immediately judging or evaluating them.
Evaluate options : Weigh the pros and cons of each potential solution, considering factors such as feasibility, effectiveness, and potential risks.
Select the best solution : Choose the option that best addresses the problem and aligns with your objectives.
Implement the solution : Put the selected solution into action and monitor the results to ensure it resolves the issue.
Review and learn : Reflect on the problem-solving process, identify any improvements or adjustments that can be made, and apply these learnings to future situations.

Defining the Problem

To start tackling a problem, first, identify and understand it. Analyzing the issue thoroughly helps to clarify its scope and nature. Ask questions to gather information and consider the problem from various angles. Some strategies to define the problem include:

Brainstorming with others
Asking the 5 Ws and 1 H (Who, What, When, Where, Why, and How)
Analyzing cause and effect
Creating a problem statement

Generating Solutions

Once the problem is clearly understood, brainstorm possible solutions. Think creatively and keep an open mind, as well as considering lessons from past experiences. Consider:

Creating a list of potential ideas to solve the problem
Grouping and categorizing similar solutions
Prioritizing potential solutions based on feasibility, cost, and resources required
Involving others to share diverse opinions and inputs

Evaluating and Selecting Solutions

Evaluate each potential solution, weighing its pros and cons. To facilitate decision-making, use techniques such as:

SWOT analysis (Strengths, Weaknesses, Opportunities, Threats)
Decision-making matrices
Pros and cons lists
Risk assessments

After evaluating, choose the most suitable solution based on effectiveness, cost, and time constraints.

Implementing and Monitoring the Solution

Implement the chosen solution and monitor its progress. Key actions include:

Communicating the solution to relevant parties
Setting timelines and milestones
Assigning tasks and responsibilities
Monitoring the solution and making adjustments as necessary
Evaluating the effectiveness of the solution after implementation

Utilize feedback from stakeholders and consider potential improvements. Remember that problem-solving is an ongoing process that can always be refined and enhanced.

Problem-Solving Techniques

During each step, you may find it helpful to utilize various problem-solving techniques, such as:

Brainstorming : A free-flowing, open-minded session where ideas are generated and listed without judgment, to encourage creativity and innovative thinking.
Root cause analysis : A method that explores the underlying causes of a problem to find the most effective solution rather than addressing superficial symptoms.
SWOT analysis : A tool used to evaluate the strengths, weaknesses, opportunities, and threats related to a problem or decision, providing a comprehensive view of the situation.
Mind mapping : A visual technique that uses diagrams to organize and connect ideas, helping to identify patterns, relationships, and possible solutions.

Brainstorming

When facing a problem, start by conducting a brainstorming session. Gather your team and encourage an open discussion where everyone contributes ideas, no matter how outlandish they may seem. This helps you:

Generate a diverse range of solutions
Encourage all team members to participate
Foster creative thinking

When brainstorming, remember to:

Reserve judgment until the session is over
Encourage wild ideas
Combine and improve upon ideas

Root Cause Analysis

For effective problem-solving, identifying the root cause of the issue at hand is crucial. Try these methods:

5 Whys : Ask “why” five times to get to the underlying cause.
Fishbone Diagram : Create a diagram representing the problem and break it down into categories of potential causes.
Pareto Analysis : Determine the few most significant causes underlying the majority of problems.

SWOT Analysis

SWOT analysis helps you examine the Strengths, Weaknesses, Opportunities, and Threats related to your problem. To perform a SWOT analysis:

List your problem’s strengths, such as relevant resources or strong partnerships.
Identify its weaknesses, such as knowledge gaps or limited resources.
Explore opportunities, like trends or new technologies, that could help solve the problem.
Recognize potential threats, like competition or regulatory barriers.

SWOT analysis aids in understanding the internal and external factors affecting the problem, which can help guide your solution.

Mind Mapping

A mind map is a visual representation of your problem and potential solutions. It enables you to organize information in a structured and intuitive manner. To create a mind map:

Write the problem in the center of a blank page.
Draw branches from the central problem to related sub-problems or contributing factors.
Add more branches to represent potential solutions or further ideas.

Mind mapping allows you to visually see connections between ideas and promotes creativity in problem-solving.

Examples of Problem Solving in Various Contexts

In the business world, you might encounter problems related to finances, operations, or communication. Applying problem-solving skills in these situations could look like:

Identifying areas of improvement in your company’s financial performance and implementing cost-saving measures
Resolving internal conflicts among team members by listening and understanding different perspectives, then proposing and negotiating solutions
Streamlining a process for better productivity by removing redundancies, automating tasks, or re-allocating resources

In educational contexts, problem-solving can be seen in various aspects, such as:

Addressing a gap in students’ understanding by employing diverse teaching methods to cater to different learning styles
Developing a strategy for successful time management to balance academic responsibilities and extracurricular activities
Seeking resources and support to provide equal opportunities for learners with special needs or disabilities

Everyday life is full of challenges that require problem-solving skills. Some examples include:

Overcoming a personal obstacle, such as improving your fitness level, by establishing achievable goals, measuring progress, and adjusting your approach accordingly
Navigating a new environment or city by researching your surroundings, asking for directions, or using technology like GPS to guide you
Dealing with a sudden change, like a change in your work schedule, by assessing the situation, identifying potential impacts, and adapting your plans to accommodate the change.
How to Resolve Employee Conflict at Work [Steps, Tips, Examples]
How to Write Inspiring Core Values? 5 Steps with Examples
30 Employee Feedback Examples (Positive & Negative)

The Art of Effective Problem Solving: A Step-by-Step Guide

Author: Daniel Croft

Daniel Croft is an experienced continuous improvement manager with a Lean Six Sigma Black Belt and a Bachelor's degree in Business Management. With more than ten years of experience applying his skills across various industries, Daniel specializes in optimizing processes and improving efficiency. His approach combines practical experience with a deep understanding of business fundamentals to drive meaningful change.

Whether we realise it or not, problem solving skills are an important part of our daily lives. From resolving a minor annoyance at home to tackling complex business challenges at work, our ability to solve problems has a significant impact on our success and happiness. However, not everyone is naturally gifted at problem-solving, and even those who are can always improve their skills. In this blog post, we will go over the art of effective problem-solving step by step.

You will learn how to define a problem, gather information, assess alternatives, and implement a solution, all while honing your critical thinking and creative problem-solving skills. Whether you’re a seasoned problem solver or just getting started, this guide will arm you with the knowledge and tools you need to face any challenge with confidence. So let’s get started!

Problem Solving Methodologies

Individuals and organisations can use a variety of problem-solving methodologies to address complex challenges. 8D and A3 problem solving techniques are two popular methodologies in the Lean Six Sigma framework.

Methodology of 8D (Eight Discipline) Problem Solving:

The 8D problem solving methodology is a systematic, team-based approach to problem solving. It is a method that guides a team through eight distinct steps to solve a problem in a systematic and comprehensive manner.

The 8D process consists of the following steps:

Form a team: Assemble a group of people who have the necessary expertise to work on the problem.
Define the issue: Clearly identify and define the problem, including the root cause and the customer impact.
Create a temporary containment plan: Put in place a plan to lessen the impact of the problem until a permanent solution can be found.
Identify the root cause: To identify the underlying causes of the problem, use root cause analysis techniques such as Fishbone diagrams and Pareto charts.
Create and test long-term corrective actions: Create and test a long-term solution to eliminate the root cause of the problem.
Implement and validate the permanent solution: Implement and validate the permanent solution’s effectiveness.
Prevent recurrence: Put in place measures to keep the problem from recurring.
Recognize and reward the team: Recognize and reward the team for its efforts.

Download the 8D Problem Solving Template

A3 Problem Solving Method:

The A3 problem solving technique is a visual, team-based problem-solving approach that is frequently used in Lean Six Sigma projects. The A3 report is a one-page document that clearly and concisely outlines the problem, root cause analysis, and proposed solution.

The A3 problem-solving procedure consists of the following steps:

Determine the issue: Define the issue clearly, including its impact on the customer.
Perform root cause analysis: Identify the underlying causes of the problem using root cause analysis techniques.
Create and implement a solution: Create and implement a solution that addresses the problem’s root cause.
Monitor and improve the solution: Keep an eye on the solution’s effectiveness and make any necessary changes.

Subsequently, in the Lean Six Sigma framework, the 8D and A3 problem solving methodologies are two popular approaches to problem solving. Both methodologies provide a structured, team-based problem-solving approach that guides individuals through a comprehensive and systematic process of identifying, analysing, and resolving problems in an effective and efficient manner.

Step 1 – Define the Problem

The definition of the problem is the first step in effective problem solving. This may appear to be a simple task, but it is actually quite difficult. This is because problems are frequently complex and multi-layered, making it easy to confuse symptoms with the underlying cause. To avoid this pitfall, it is critical to thoroughly understand the problem.

To begin, ask yourself some clarifying questions:

What exactly is the issue?
What are the problem’s symptoms or consequences?
Who or what is impacted by the issue?
When and where does the issue arise?

Answering these questions will assist you in determining the scope of the problem. However, simply describing the problem is not always sufficient; you must also identify the root cause. The root cause is the underlying cause of the problem and is usually the key to resolving it permanently.

Try asking “why” questions to find the root cause:

What causes the problem?
Why does it continue?
Why does it have the effects that it does?

By repeatedly asking “ why ,” you’ll eventually get to the bottom of the problem. This is an important step in the problem-solving process because it ensures that you’re dealing with the root cause rather than just the symptoms.

Once you have a firm grasp on the issue, it is time to divide it into smaller, more manageable chunks. This makes tackling the problem easier and reduces the risk of becoming overwhelmed. For example, if you’re attempting to solve a complex business problem, you might divide it into smaller components like market research, product development, and sales strategies.

To summarise step 1, defining the problem is an important first step in effective problem-solving. You will be able to identify the root cause and break it down into manageable parts if you take the time to thoroughly understand the problem. This will prepare you for the next step in the problem-solving process, which is gathering information and brainstorming ideas.

Step 2 – Gather Information and Brainstorm Ideas

Gathering information and brainstorming ideas is the next step in effective problem solving. This entails researching the problem and relevant information, collaborating with others, and coming up with a variety of potential solutions. This increases your chances of finding the best solution to the problem.

Begin by researching the problem and relevant information. This could include reading articles, conducting surveys, or consulting with experts. The goal is to collect as much information as possible in order to better understand the problem and possible solutions.

Next, work with others to gather a variety of perspectives. Brainstorming with others can be an excellent way to come up with new and creative ideas. Encourage everyone to share their thoughts and ideas when working in a group, and make an effort to actively listen to what others have to say. Be open to new and unconventional ideas and resist the urge to dismiss them too quickly.

Finally, use brainstorming to generate a wide range of potential solutions. This is the place where you can let your imagination run wild. At this stage, don’t worry about the feasibility or practicality of the solutions; instead, focus on generating as many ideas as possible. Write down everything that comes to mind, no matter how ridiculous or unusual it may appear. This can be done individually or in groups.

Once you’ve compiled a list of potential solutions, it’s time to assess them and select the best one. This is the next step in the problem-solving process, which we’ll go over in greater detail in the following section.

Step 3 – Evaluate Options and Choose the Best Solution

Once you’ve compiled a list of potential solutions, it’s time to assess them and select the best one. This is the third step in effective problem solving, and it entails weighing the advantages and disadvantages of each solution, considering their feasibility and practicability, and selecting the solution that is most likely to solve the problem effectively.

To begin, weigh the advantages and disadvantages of each solution. This will assist you in determining the potential outcomes of each solution and deciding which is the best option. For example, a quick and easy solution may not be the most effective in the long run, whereas a more complex and time-consuming solution may be more effective in solving the problem in the long run.

Consider each solution’s feasibility and practicability. Consider the following:

Can the solution be implemented within the available resources, time, and budget?
What are the possible barriers to implementing the solution?
Is the solution feasible in today’s political, economic, and social environment?

You’ll be able to tell which solutions are likely to succeed and which aren’t by assessing their feasibility and practicability.

Finally, choose the solution that is most likely to effectively solve the problem. This solution should be based on the criteria you’ve established, such as the advantages and disadvantages of each solution, their feasibility and practicability, and your overall goals.

It is critical to remember that there is no one-size-fits-all solution to problems. What is effective for one person or situation may not be effective for another. This is why it is critical to consider a wide range of solutions and evaluate each one based on its ability to effectively solve the problem.

Step 4 – Implement and Monitor the Solution

Communication the missing peice from Lean Six Sigma - Learnleansigma

When you’ve decided on the best solution, it’s time to put it into action. The fourth and final step in effective problem solving is to put the solution into action, monitor its progress, and make any necessary adjustments.

To begin, implement the solution. This may entail delegating tasks, developing a strategy, and allocating resources. Ascertain that everyone involved understands their role and responsibilities in the solution’s implementation.

Next, keep an eye on the solution’s progress. This may entail scheduling regular check-ins, tracking metrics, and soliciting feedback from others. You will be able to identify any potential roadblocks and make any necessary adjustments in a timely manner if you monitor the progress of the solution.

Finally, make any necessary modifications to the solution. This could entail changing the solution, altering the plan of action, or delegating different tasks. Be willing to make changes if they will improve the solution or help it solve the problem more effectively.

It’s important to remember that problem solving is an iterative process, and there may be times when you need to start from scratch. This is especially true if the initial solution does not effectively solve the problem. In these situations, it’s critical to be adaptable and flexible and to keep trying new solutions until you find the one that works best.

To summarise, effective problem solving is a critical skill that can assist individuals and organisations in overcoming challenges and achieving their objectives. Effective problem solving consists of four key steps: defining the problem, generating potential solutions, evaluating alternatives and selecting the best solution, and implementing the solution.

You can increase your chances of success in problem solving by following these steps and considering factors such as the pros and cons of each solution, their feasibility and practicability, and making any necessary adjustments. Furthermore, keep in mind that problem solving is an iterative process, and there may be times when you need to go back to the beginning and restart. Maintain your adaptability and try new solutions until you find the one that works best for you.

Novick, L.R. and Bassok, M., 2005. Problem Solving . Cambridge University Press.

Was this helpful?

Daniel Croft

Daniel Croft is a seasoned continuous improvement manager with a Black Belt in Lean Six Sigma. With over 10 years of real-world application experience across diverse sectors, Daniel has a passion for optimizing processes and fostering a culture of efficiency. He's not just a practitioner but also an avid learner, constantly seeking to expand his knowledge. Outside of his professional life, Daniel has a keen Investing, statistics and knowledge-sharing, which led him to create the website www.learnleansigma.com, a platform dedicated to Lean Six Sigma and process improvement insights.

Selecting a lean six sigma methodology title

Improvement Methodology: Selecting The Right 1

SIPOC vs COPIS - Process Mapping tools - Feature Image - Learnleansigma

SIPOC vs COPIS: Which Process Mapping Tool Should You Use?

Free lean six sigma templates.

Improve your Lean Six Sigma projects with our free templates. They're designed to make implementation and management easier, helping you achieve better results.

5S Floor Marking Best Practices

In lean manufacturing, the 5S System is a foundational tool, involving the steps: Sort, Set…

How to Measure the ROI of Continuous Improvement Initiatives

When it comes to business, knowing the value you’re getting for your money is crucial,…

8D Problem-Solving: Common Mistakes to Avoid

In today’s competitive business landscape, effective problem-solving is the cornerstone of organizational success. The 8D…

The Evolution of 8D Problem-Solving: From Basics to Excellence

In a world where efficiency and effectiveness are more than just buzzwords, the need for…

8D: Tools and Techniques

Are you grappling with recurring problems in your organization and searching for a structured way…

How to Select the Right Lean Six Sigma Projects: A Comprehensive Guide

Going on a Lean Six Sigma journey is an invigorating experience filled with opportunities for…

Brain Power

5 steps (and 4 techniques) for effective problem solving.

Problem solving is the process of reviewing every element of an issue so you can get to a solution or fix it. Problem solving steps cover multiple aspects of a problem that you can bring together to find a solution. Whether that’s in a group collaboratively or independently, the process remains the same, but the approach and the steps can differ.

To find a problem solving approach that works for you, your team, or your company, you have to take into consideration the environment you’re in and the personalities around you.

Knowing the characters in the room will help you decide on the best approach to try and ultimately get to the best solution.

5 problem solving steps, 4 techniques to encourage problem solving, the bottom line.

No matter what the problem is, to solve it, you nearly always have to follow these problem solving steps. Missing any of these steps can cause the problem to either resurface or the solution to not be implemented correctly.

Once you know these steps, you can then get creative with the approach you take to find the solutions you need.

1. Define the Problem

You must define and understand the problem before you start, whether you’re solving it independently or as a group. If you don’t have a single view of what the problem is, you could be fixing something that doesn’t need fixing, or you’ll fix the wrong problem.

Spend time elaborating on the problem, write it down, and discuss everything, so you’re clear on why the problem is occurring and who it is impacting.

Once you have clarity on the problem, you then need to start thinking about every possible solution . This is where you go big and broad, as you want to come up with as many alternative solutions as possible. Don’t just take the first idea; build out as many as you can through active listening, as the more you create, the more likely you’ll find a solution that has the best impact on the team.

3. Decide on a Solution

Whichever solution you pick individually or as a team, make sure you think about the impact on others if you implement this solution. Ask questions like:

How will they react to this change?
Will they need to change anything?
Who do we need to inform of this change?

4. Implement the Solution

At this stage of problem solving, be prepared for feedback, and plan for this. When you roll out the solution, request feedback on the success of the change made.

5. Review, Iterate, and Improve

Making a change shouldn’t be a one time action. Spend time reviewing the results of the change to make sure it’s made the required impact and met the desired outcomes.

Make changes where needed so you can further improve the solution implemented.

Each individual or team is going to have different needs and may need a different technique to encourage each of the problem solving steps. Try one of these to stimulate the process.

1-2-4 All Approach + Voting

The 1-2-4-All is a good problem solving approach that can work no matter how large the group is. Everyone is involved, and you can generate a vast amount of ideas quickly.

Ideas and solutions are discussed and organized rapidly, and what is great about this approach is the attendees own their ideas, so when it comes to implementing the solutions, you don’t have more work to gain buy-in.

As a facilitator, you first need to present the group with a question explaining the problem or situation. For example, “What actions or ideas would you recommend to solve the company’s lack of quiet working areas?”

With the question clear for all to see, the group then spends 5 minutes to reflect on the question individually. They can jot down their thoughts and ideas on Post-Its.

Now ask the participants to find one or two other people to discuss their ideas and thoughts with. Ask the group to move around to find a partner so they can mix with new people.

Ask the pairs to spend 5 minutes discussing their shared ideas and thoughts.

Next, put the group into groups of two or three pairs to make groups of 4-6. Each group shouldn’t be larger than six as the chances of everyone being able to speak reduces.

Ask the group to discuss one interesting idea they’ve heard in previous rounds, and each group member shares one each.

The group then needs to pick their preferred solution to the problem. This doesn’t have to be voted on, just one that resonated most with the group.

Then ask for three actions that could be taken to implement this change.

Bring everyone back together as a group and ask open questions like “What is the one thing you discussed that stood out for you?” or “Is there something you now see differently following these discussions?”

By the end of the session, you’ll have multiple approaches to solve the problem, and the whole group will have contributed to the future solutions and improvements.

The Lightning Decision Jam

The Lightning Decision Jam is a great way to solve problems collaboratively and agree on one solution or experiment you want to try straight away. It encourages team decision making, but at the same time, the individual can get their ideas and feedback across. [1]

If, as a team, you have a particular area you want to improve upon, like the office environment, for example, this approach is perfect to incorporate in the problem solving steps.

The approach follows a simple loop.

Make a Note – Stick It on The Wall – Vote – Prioritize

Using sticky notes, the technique identifies major problems, encourages solutions, and opens the group up for discussion. It allows each team member to play an active role in identifying both problems and ways to solve them.

Mind Mapping

Mind mapping is a fantastic visual thinking tool that allows you to bring problems to life by building out the connections and visualizing the relationships that make up the problem.

You can use a mind map to quickly expand upon the problem and give yourself the full picture of the causes of the problem, as well as solutions [2] .

Problem Solving with Mind Maps (Tutorial) - Focus

The goal of a mind map is to simplify the problem and link the causes and solutions to the problem.

To create a mind map, you must first create the central topic (level 1). In this case, that’s the problem.

Next, create the linked topics (level 2) that you place around and connect to the main central topic with a simple line.

If the central topic is “The client is always changing their mind at the last minute,” then you could have linked topics like:

How often does this happen?
Why are they doing this?
What are they asking for?
How do they ask for it?
What impact does this have?

Adding these linking topics allows you to start building out the main causes of the problem as you can begin to see the full picture of what you need to fix. Once you’re happy that you’ve covered the breadth of the problem and its issues, you can start to ideate on how you’re going to fix it with the problem solving steps.

Now, start adding subtopics (level 3) linking to each of the level 2 topics. This is where you can start to go big on solutions and ideas to help fix the problem.

For each of the linked topics (level 2), start to think about how you can prevent them, mitigate them, or improve them. As this is just ideas on paper, write down anything that comes to mind, even if you think the client will never agree to it!

The more you write down, the more ideas you’ll have until you find one or two that could solve the main problem.

Once you run out of ideas, take a step back and highlight your favorite solutions to take forward and implement.

The 5 Why’s

The five why’s can sound a little controversial, and you shouldn’t try this without prepping the team beforehand.

Asking “why” is a great way to go deep into the root of the problem to make the individual or team really think about the cause. When a problem arises, we often have preconceived ideas about why this problem has occurred, which is usually based on our experiences or beliefs.

Start with describing the problem, and then the facilitator can ask “Why?” fives time or more until you get to the root of the problem. It’s tough at first to keep being asked why, but it’s also satisfying when you get to the root of the problem [3] .

As a facilitator, although the basic approach is to ask why, you need to be careful not to guide the participant down a single route.

To help with this, you can use a mind map with the problem at the center. Then ask a why question that will result in multiple secondary topics around the central problem. Having this visual representation of the problem helps you build out more useful why questions around it.

Once you get to the root of the problem, don’t forget to be clear in the actions to put a fix in place to resolve it.

Learn more about how to use the five why’s here .

To fix a problem, you must first be in a position where you fully understand it. There are many ways to misinterpret a problem, and the best way to understand them is through conversation with the team or individuals who are experiencing it.

Once you’re aligned, you can then begin to work on the solutions that will have the greatest impact through effective problem solving steps.

For the more significant or difficult problems to solve, it’s often advisable to break the solution up into smaller actions or improvements.

Trial these improvements in short iterations, and then continue the conversations to review and improve the solution. Implementing all of these steps will help you root out the problems and find useful solutions each time.

[1]	^	UX Planet:
[2]	^	Focus:
[3]	^	Expert Program Management:

How to Use a Planner Effectively

How to Be a Better Planner: Avoid the Planning Fallacy

5 Best Apps to Help You Delegate Tasks Easily

Delegating Leadership Style: What Is It & When To Use It?

The Fear of Delegating Work To Others

Why Is Delegation Important in Leadership?

7 Best Tools for Prioritizing Work

How to Deal with Competing Priorities Effectively

What Is the RICE Prioritization Model And How Does It Work?

4 Exercises to Improve Your Focus

What Is Chronic Procrastination and How To Deal with It

How to Snap Out of Procrastination With ADHD

Are Depression And Procrastination Connected?

Procrastination And Laziness: Their Differences & Connections

Bedtime Procrastination: Why You Do It And How To Break It

15 Books on Procrastination To Help You Start Taking Action

Productive Procrastination: Is It Good or Bad?

how does procrastination affect productivity

The Impact of Procrastination on Productivity

How to Cope With Anxiety-Induced Procrastination

How to Break the Perfectionism-Procrastination Loop

15 Work-Life Balance Books to Help You Take Control of Life

Work Life Balance for Women: What It Means & How to Find It

6 Essential Mindsets For Continuous Career Growth

How to Discover Your Next Career Move Amid the Great Resignation

The Key to Creating a Vibrant (And Magical Life) by Lee Cockerell

9 Tips on How To Disconnect From Work And Stay Present

Work-Life Integration vs Work-Life Balance: Is One Better Than the Other?

How To Practice Self-Advocacy in the Workplace (Go-to Guide)

How to Boost Your Focus And Attention Span

What Are Distractions in a Nutshell?

What Is Procrastination And How To End It

Prioritization — Using Your Time & Energy Effectively

Delegation — Leveraging Your Time & Resources

Your Guide to Effective Planning & Scheduling

The Ultimate Guide to Achieving Goals

How to Find Lasting Motivation

Complete Guide to Getting Back Your Energy

How to Have a Good Life Balance

Explore the time flow system.

About the Time Flow System

Key Philosophy I: Fluid Progress, Like Water

Key Philosophy II: Pragmatic Priorities

Key Philosophy III: Sustainable Momentum

Key Philosophy IV: Three Goal Focus

How the Time Flow System Works

Quality Improvement
Talk To Minitab

The Basics of Structured Problem-Solving Methodologies: DMAIC & 8D

Topics: Minitab Engage

When it comes to solving a problem, organizations want to get to the root cause of the problem, as quickly as possible. They also want to ensure that they find the most effective solution to that problem, make sure the solution is implemented fully, and is sustained into the future so that the problem no longer occurs. The best way to do this is by implementing structured problem-solving. In this blog post, we’ll briefly cover structured problem-solving and the best improvement methodologies to achieve operational excellence. Before we dive into ways Minitab can help, let’s first cover the basics of problem-solving.

WHAT IS STRUCTURED PROBLEM-SOLVING?

Structured problem-solving is a disciplined approach that breaks down the problem-solving process into discrete steps with clear objectives. This method enables you to tackle complex problems, while ensuring you’re resolving the right ones. It also ensures that you fully understand those problems, you've considered the reasonable solutions, and are effectively implementing and sustaining them.

WHAT IS A STRUCTURED PROBLEM-SOLVING METHODOLOGY?

A structured problem-solving methodology is a technique that consists of a series of phases that a project must pass through before it gets completed. The goal of a methodology is to highlight the intention behind solving a particular problem and offers a strategic way to resolve it. WHAT ARE THE BEST PROBLEM-SOLVING METHODOLOGIES?

That depends on the problem you’re trying to solve for your improvement initiative. The structure and discipline of completing all the steps in each methodology is more important than the specific methodology chosen. To help you easily visualize these methodologies, we’ve created the Periodic Table of Problem-Solving Methodologies. Now let’s cover two important methodologies for successful process improvement and problem prevention: DMAIC and 8D .

8D is known as the Eight Disciplines of problem-solving. It consists of eight steps to solve difficult, recurring, or critical problems. The methodology consists of problem-solving tools to help you identify, correct, and eliminate the source of problems within your organization. If the problem you’re trying to solve is complex and needs to be resolved quickly, 8D might be the right methodology to implement for your organization. Each methodology could be supported with a project template, where its roadmap corresponds to the set of phases in that methodology. It is a best practice to complete each step of a given methodology, before moving on to the next one.

MINITAB ENGAGE, YOUR SOLUTION TO EFFECTIVE PROBLEM-SOLVING

Minitab Engage TM was built to help organizations drive innovation and improvement initiatives. What makes our solution unique is that it combines structured problem-solving methodologies with tools and dashboards to help you plan, execute, and measure your innovation initiatives! There are many problem-solving methodologies and tools to help you get started. We have the ultimate end-to-end improvement solution to help you reach innovation success.

Ready to explore structured problem-solving?

Download our free eBook to discover the top methodologies and tools to help you accelerate your innovation programs.

Trust Center

Terms of Use
Privacy Policy
Cookies Settings

Adopting the right problem-solving approach

May 4, 2023 You’ve defined your problem, ensured stakeholders are aligned, and are ready to bring the right problem-solving approach and focus to the situation to find an optimal solution. But what is the right problem-solving approach? And what if there is no single ideal course of action? In our 2013 classic from the Quarterly , senior partner Olivier Leclerc highlights the value of taking a number of different approaches simultaneously to solve difficult problems. Read on to discover the five flexons, or problem-solving languages, that can be applied to the same problem to generate richer insights and more innovative solutions. Then check out more insights on problem-solving approaches, and dive into examples of pressing challenges organizations are contending with now.

Five routes to more innovative problem solving

Author Talks: Get on the performance curve

Strategy to beat the odds

How to master the seven-step problem-solving process

Want better strategies? Become a bulletproof problem solver

Digital performance management: From the front line to the bottom line

Addressing employee burnout: Are you solving the right problem?

Business’s ‘It’s not my problem’ IT problem

TEST YOUR SKILLS

Take the McKinsey Problem Solving Test

Solve, McKinsey’s assessment game

General Problem-solving Process

Introduction

The following is a general problem-solving process that characterizes the steps that can be followed by any discipline when approaching and rationally solving a problem. When used in conjunction with reasoning and decision-making skills, the process works well for one or more participants. Its main purpose is to guide participants through a procedure for solving many types of problems that have a varying level of complexity.

More importantly, the process is both descriptive and prescriptive. This means it can be used to look at past, present, and potential future problems and their solutions in a clear systematic way that is consistent and able to be generalized. At each step along the way to a solution, various types of research must be conducted to successfully accomplish the steps of the process and thus arrive at an effective solution that is viable. A description of research follows the problem solving process. In both the problem solving and research processes, good decision-making, critical-thinking and self-assessment is vital to a high quality result. At each step in the process, the problem-solver may need to go back to earlier steps and reexamine decisions made. It is this revisiting of earlier choices that make the process iterative and allows for improvement of the final outcomes.

Steps in the General Problem-solving Process

Become aware of the problem
Define the problem
Choose the particular problem to be solved
Identify potential solutions
Evaluate the valid potential solutions to select the best one
Develop an action plan to implement the best solution

Become Aware of the Problem

The first step of any problem-solving process is becoming aware. This awareness can be generated from inside or outside the individual. Many times the awareness is part of a stated task or assignment given to the individual by someone else. In other cases, a person can observe a specific problem or a clear gap in knowledge that they feel must be addressed. In the end, as long as a problem is perceived by oneself or others, awareness of this problem is achieved. However, the level of awareness and the research associated with this level is vital to the initiation of the problem solving process.

Define the Problem

After the problem is recognized, research is conducted. Initially, research must be done to help define the problem as well as identify the assumptions being made and determine the parameters of the situation.

In the end, the main purpose of this step is to evaluate the constraints on the problem and the problem solver to better understand the goals that are trying to be reached. Once these goals are identified, the objectives that must be attained in order to reach the goals can be specified and utilized to help narrow the scope of the problem. Once the goals and objectives are clearly understood, the problem to be solved can be selected. An easy way to think of goals and objectives is that goals are what you hope to achieve while objectives are how you will go about accomplishing the goal.

Just as research might have been the impetus for engaging in the problem solving process—it made the problem-solver aware—research is vital to the specification of parameters and assumptions. The heart of this step is the series of decisions made to narrow the scope of the problem made by the problem-solver. Parameters are those factual boundaries and constraints set by the problem statement or discovered through research. Assumptions by contrast are those constraints that the problem-solver sets without having incontrovertible factual backing for those decisions. A clear understanding of the assumptions being made when engaging in the process is important. If an unsatisfactory outcome is reached, it may be necessary to adjust these assumptions. Even if the final solution is arrived at, knowing one’s assumptions assists the problem-solver in explaining and defending their conclusions.

Choose Which Problem to Be Solved

Once a goal and set of objectives has been specified and the parameters and assumptions have been identified, it is necessary to choose a particular problem to solve. Any large problem can be broken into smaller problems that are in turn broken into even smaller problems to be addressed. Each problem is an achievable goal that consists of objectives. Each of these objectives is a sub-problem that must be solved first in order to solve the larger overarching problem.

There are many different reasons to choose a particular problem to solve. It is important to do risk assessment on the problems involved and examine why the problem is being solved. There are many reasons why a particular problem is chosen as the one to solve. For example, the problem might be the most important, most immediate, most far reaching, or most politically important at the moment. Whatever the choice, the individual or group must have clear reasons why they choose the problem to be solved.

Once the aspects of the problem are known, the problem must be phrased as a question that each solution can answer affirmatively. An example of a problem statement might be "How might I increase the use of problem solving techniques by college graduates of four year universities in America today?" This specific type of question has four separate parts: question statement, active verb, object, and parameters and assumptions.

The first part is the question statement which transforms the problem into a question to be answered. It takes the form "How might I" or "In what ways might I." If the process is being undertaken by a group, it should be phrased as we instead of I. At times, an individual or a group may examine an issue concerning a third party. For example, students may work on problems facing their institution or that must be handled by the government. In this case, the question might become, "how might our school," or "In what way might the United States government." In all of these cases, the object is to create a question that must be answered as well as specify the group who is designated to answer it. Each solution must then apply to that group and be able to be accomplished by them as well.

Next is the active verb or the action used to solve the problem. Some of the most useful of these active verbs are the ones that describe change without specifying an absolute end or any one action. For example: Accelerate, alleviate, broaden, increase, minimize, reduce, and stabilize. It is important to realize that the stronger the verb, the more difficult it might be to accomplish workable solutions. For example, it is easier to reduce crime than to eliminate it. Keep this in mind when choosing verbs because verb choice is vital to good solution finding. If necessary, two or more verbs can be used and should be separated by the following conjunctions: And, Or, or And/Or. To assist in the verb choice process, some active verbs are listed below:

Active Verbs

Accelerate	Control	Improve	Process	Stop
Accomplish	Coordinate	Improvise	Program	Strengthen
Accommodate	Counsel	Increase	Promote	Stretch
Achieve	Create	Initiate	Propose	Structure
Act	Define	Inspect	Protect	Study
Add	Demonstrate	Institute	Prove	Summarize
Administer	Design	Introduce	Provide	Supervise
Advise	Determine	Invent	Publish	Support
Alleviate	Develop	Launch	Recruit	Surpass
Analyze	Earn	Lead	Redesign	Survey
Arrange	Eliminate	Locate	Reduce	Synthesize
Assemble	Employ	Maintain	Reorganize	Systematize
Assess	Ensure	Manage	Report	Teach
Audit	Establish	Market	Represent	Terminate
Avert	Evaluate	Maximize	Research	Test
Broaden	Examine	Minimize	Resolve	Tighten
Build	Execute	Monitor	Reverse	Trace
Centralize	Expand	Motivate	Review	Train
Change	Expedite	Negotiate	Revise	Translate
Clarify	Fabricate	Operate	Schedule	Trim
Collaborate	Follow	Organize	Select	Uncover
Compete	Form	Originate	Serve	Unify
Compile	Formulate	Participate	Settle	Unravel
Compose	Find	Perform	Shape	Utilize
Conceive	Generate	Persuade	Simplify	Verbalize
Conclude	Guide	Plan	Slow	Verify
Conduct	Head	Predict	Solve	Visualize
Conserve	Hire	Prepare	Stabilize	Widen
Consolidate	Identify	Preserve	Start	Withdraw
Construct	Implement	Prevent	Stimulate	Work

Figure 2 is a list action verbs that can be used when formulating a problem statement.

The third part of the problem statement is the object of the sentence that relates to the problem being solved. The object states what is being acted upon by the verb to help solve the problem. Each solution must directly or indirectly affect this object. In our earlier statement, "How might I increase the use of problem solving techniques by college graduates of four year universities in America today?" the object is "use of problem solving."

Finally, the parameters and assumptions that are bounding the solution are listed. These help to focus the solutions that are generated. Though parameters are not necessary, they are often useful to help limit and focus the scope of the process. Be careful not to leave too broad a problem. Broad problems lead to a wide number of solutions that can be difficult to choose between and implement with weak or ineffectual results. At the same time, an overly narrow problem statement can lead to a small number of solutions that provide little useable results. In our example, "college graduates of four year universities in America today?" are the parameters. This is identified with the conjunction ‘by’ and is used to mark who should have the use of problem solving increased.

Once the problem statement is phrased properly, solutions can be generated. However, it is important to note that this statement might have to be modified as more research becomes available or as the remainder of the process is worked through. As the process is iterated, small modifications to the problem statement can be made and refinements in the scope and specificity accomplished through changes in the verb, object and parameters.

Identify Potential Solutions

Once the problem statement has been chosen, it is necessary to generate potential solutions. This is the most creative portion of the process. Even so, conducting research into existing solutions to the problem or similar problems is helpful to generate workable solutions. The main criteria for judging solutions in this step is simply whether or not they answer the problem statement with a ‘yes.’ At this point, it may also be possible to eliminate some solutions because they do not agree with commonly held moral and ethical guidelines. Even though not stated specifically, these guidelines are understood and assumed to be upheld when reviewing solutions. For example, a solution to global pollution might be to kill every human. This is obviously not a good solution even though it would give a ‘yes’ answer to the question of "How might we minimize global air pollution caused by humans?"

When working in groups, it is important to work together to generate solutions. Also, it should be realized that the solution process takes time depending upon the problem complexity. At this point, do not judge solutions for more than their ability to answer the stated problem questions with a "yes" because they will be evaluated more closely in the next step. Many times it is possible to use discarded solutions to develop new ideas for solutions. However, it is important to be able to distinguish between similar solutions. Saying the same thing in ten different ways may not be ten different solutions. Try to group similar solutions together. If all the solutions fall into one group, then perhaps the best solution is to implement that group with different variations for different cases of the problems. Just as there are many unique problems, the solutions to these problems are all unique and need to be adapted to the particular situations being discussed. This will be addressed in the last section of the problem solving process.

Evaluate the Valid Potential Solutions to Select a Best Solution

Once a list of potential solutions has been generated, the evaluation process can begin. First, a list of criteria for judging all solutions equally must be chosen. It is vital to eliminate personal bias towards particular solutions as well as to utilize a consistent set of criteria to evaluate all solutions fairly. For example: most cost effective, most socially acceptable, most easily implemented, most directly solves the problem, most far reaching effects, most lasting effects, least government intervention required, least limiting to development, or quickest to implement. It is important to have research and logical reasons for the criteria chosen as well as factual support for the rankings given to a particular solution for each criteria.

Once the criteria are chosen, they should be given a weighting. In most cases, all the criteria have the same weight. However, it is possible to give other weightings to criteria so that a particular factor is seen as more important. Many times, the cost, time to complete, or political nature of a project is more important than other factors and so that criteria may have a higher ranking than others used to judge.

Once the criteria are chosen and weighted, all qualified solutions must then be ranked. Two types of procedures for ranking exist. If the number of solutions is large, usually greater than ten, an independent ranking must be conducted to narrow the number of choices. Each solution is listed along one side of a grid and then given a score for each criteria from 1-5 where 5 is the highest (other ranges can be used). The rankings for the various criteria are then totaled and a score for each solution is reported. These scores are compared to create a subset of solutions that have the highest score.

If the number of solutions is initially small or the independent ranking has been conducted, the remaining solutions are placed into a grid with the criteria for a comparative analysis. Though all the solutions may be seen as good, the comparative analysis gives the best solution. The total number of solutions listed gives the range of numbers for each criteria. For example, if there are six (6) solutions, then the rankings will go from 1-6 with 6 being the highest. Each solution is ranked for each criteria in comparison to the other solutions for that criteria. However, within a criteria no two solutions can have the same number. If two are equal, the adjacent numbers should be added and then divided by 2. The result is then placed in the space for each solution. See the charts below for an example. If the question being asked was "How might we control development in order to preserve the integrity and character of the town of Bedminster?"

Sample Table of Potential Solutions


	Re-Zoning	Re-zone to eliminate large high-density developments.
	Committee	Form a committee to evaluate the impact of proposed development and present it in town meetings scheduled specifically for it to be voted on by town residents.
	Developer responsibility	Make developers responsible for civil improvements made necessary by their development.
	Building rights Forfeited	Allow forfeit of building rights to the township as a tax write-off so that upon eventual sale, the parcel will be sold whole and never developed.
	Purchase rights	Purchase of building rights from private landowner by township.
	Donation as ‘Greenway’	Donation of a piece of land in a chain of parcels that provide a continuous stretch of land for wildlife to travel.

Figure A3. 3 is a list of the potential solutions to be evaluated.

Sample Table of Evaluation Criteria


		Amount of money town and taxpayer pay to implement the plan.	1
		Amount of time to put plan into action.	1
		How acceptable is the plan to the ones whom this policy will affect.	1
		Most beneficial to the environment	1
		Effects on the everyday workings of the town of Bedminster.	1

Figure 4 is a list of the criteria to be used to evaluate the potential solutions.

Sample Table of a Comparative Analysis

Cost	Time	Acceptance	Environment	Impact
4	3	3	3	3	16
3	1	4	2	4
1	6	6	1	1
6	4	5	5	5.5
2	2	2	5	2
5	5	1	5	5.5

Figure 5 is a comparative analysis of the solutions from the table in figure 6 based upon the listed criteria shown in figure 7 for the problem stated earlier. The values used for scoring range from 6 as most satisfies criteria to 1 that least satisfies criteria.

Once all the solutions are ranked for all criteria and the weighting is applied appropriately, the scores for each solution are totaled. The highest score is then the best solution. If two solutions are close in score then there may be two solutions that are equally as good but differ in their strong points.

It is important to remember that the criteria that are used to judge the solutions are reflective of the choices being made. Each criteria is a ruler or a gauge by which to measure an outcome. Different rulers will yield different results so be sure to choose the proper rulers as well as use them properly. In order to choose the correct ruler and interpret it in the correct way, it is necessary to understand many different disciplines and the tools they use. In the end, however, each individual must have good decision-making skills to choose and use criteria.

Develop an Action Plan to Implement the Solution

After selecting the best solution, it is necessary to give some thought to the way in which it might be implemented. Giving insight into funding, potential problems with implementing the solution, and the time frame of the solution is necessary for any workable solution to a problem. Not all solutions can be implemented. Unforeseen problems may arise as solutions are tested and put to work. Many times, unexpected resistance to solutions can be encountered. Other times, unacceptable results can require that another solution be used.

In some circumstances the problem may have been originally selected incorrectly, have been misunderstood, or have changed as a result of research or altered circumstances. In the end, mistakes happen and the action plan helps the problem solver be prepared for such eventualities. In any event, the action plan can be used to make others aware of potential problems that might be faced while putting the selected solution into effect. Even when solving a current problem, this process will automatically assist the problem solver in thinking of potential problems and thus assist in avoiding unwanted outcomes. Whatever the outcome, it is vital to understand that the choices made during this entire process rely upon research.

Culture Development

Workplace problem-solving examples: real scenarios, practical solutions.

March 11, 2024

In today’s fast-paced and ever-changing work environment, problems are inevitable. From conflicts among employees to high levels of stress, workplace problems can significantly impact productivity and overall well-being. However, by developing the art of problem-solving and implementing practical solutions, organizations can effectively tackle these challenges and foster a positive work culture. In this article, we will delve into various workplace problem scenarios and explore strategies for resolution. By understanding common workplace problems and acquiring essential problem-solving skills, individuals and organizations can navigate these challenges with confidence and success.

Understanding Workplace Problems

Before we can effectively solve workplace problems , it is essential to gain a clear understanding of the issues at hand. Identifying common workplace problems is the first step toward finding practical solutions. By recognizing these challenges, organizations can develop targeted strategies and initiatives to address them.

Identifying Common Workplace Problems

One of the most common workplace problems is conflict. Whether it stems from differences in opinions, miscommunication, or personality clashes, conflict can disrupt collaboration and hinder productivity. It is important to note that conflict is a natural part of any workplace, as individuals with different backgrounds and perspectives come together to work towards a common goal. However, when conflict is not managed effectively, it can escalate and create a toxic work environment.

In addition to conflict, workplace stress and burnout pose significant challenges. High workloads, tight deadlines, and a lack of work-life balance can all contribute to employee stress and dissatisfaction. When employees are overwhelmed and exhausted, their performance and overall well-being are compromised. This not only affects the individuals directly, but it also has a ripple effect on the entire organization.

Another common workplace problem is poor communication. Ineffective communication can lead to misunderstandings, delays, and errors. It can also create a sense of confusion and frustration among employees. Clear and open communication is vital for successful collaboration and the smooth functioning of any organization.

The Impact of Workplace Problems on Productivity

Workplace problems can have a detrimental effect on productivity levels. When conflicts are left unresolved, they can create a tense work environment, leading to decreased employee motivation and engagement. The negative energy generated by unresolved conflicts can spread throughout the organization, affecting team dynamics and overall performance.

Similarly, high levels of stress and burnout can result in decreased productivity, as individuals may struggle to focus and perform optimally. When employees are constantly under pressure and overwhelmed, their ability to think creatively and problem-solve diminishes. This can lead to a decline in the quality of work produced and an increase in errors and inefficiencies.

Poor communication also hampers productivity. When information is not effectively shared or understood, it can lead to misunderstandings, delays, and rework. This not only wastes time and resources but also creates frustration and demotivation among employees.

Furthermore, workplace problems can negatively impact employee morale and job satisfaction. When individuals are constantly dealing with conflicts, stress, and poor communication, their overall job satisfaction and engagement suffer. This can result in higher turnover rates, as employees seek a healthier and more supportive work environment.

In conclusion, workplace problems such as conflict, stress, burnout, and poor communication can significantly hinder productivity and employee well-being. Organizations must address these issues promptly and proactively to create a positive and productive work atmosphere. By fostering open communication, providing support for stress management, and promoting conflict resolution strategies, organizations can create a work environment that encourages collaboration, innovation, and employee satisfaction.

The Art of Problem Solving in the Workplace

Now that we have a clear understanding of workplace problems, let’s explore the essential skills necessary for effective problem-solving in the workplace. By developing these skills and adopting a proactive approach, individuals can tackle problems head-on and find practical solutions.

Problem-solving in the workplace is a complex and multifaceted skill that requires a combination of analytical thinking, creativity, and effective communication. It goes beyond simply identifying problems and extends to finding innovative solutions that address the root causes.

Essential Problem-Solving Skills for the Workplace

To effectively solve workplace problems, individuals should possess a range of skills. These include strong analytical and critical thinking abilities, excellent communication and interpersonal skills, the ability to collaborate and work well in a team, and the capacity to adapt to change. By honing these skills, individuals can approach workplace problems with confidence and creativity.

Analytical and critical thinking skills are essential for problem-solving in the workplace. They involve the ability to gather and analyze relevant information, identify patterns and trends, and make logical connections. These skills enable individuals to break down complex problems into manageable components and develop effective strategies to solve them.

Effective communication and interpersonal skills are also crucial for problem-solving in the workplace. These skills enable individuals to clearly articulate their thoughts and ideas, actively listen to others, and collaborate effectively with colleagues. By fostering open and honest communication channels, individuals can better understand the root causes of problems and work towards finding practical solutions.

Collaboration and teamwork are essential for problem-solving in the workplace. By working together, individuals can leverage their diverse skills, knowledge, and perspectives to generate innovative solutions. Collaboration fosters a supportive and inclusive environment where everyone’s ideas are valued, leading to more effective problem-solving outcomes.

The ability to adapt to change is another important skill for problem-solving in the workplace. In today’s fast-paced and dynamic work environment, problems often arise due to changes in technology, processes, or market conditions. Individuals who can embrace change and adapt quickly are better equipped to find solutions that address the evolving needs of the organization.

The Role of Communication in Problem Solving

Communication is a key component of effective problem-solving in the workplace. By fostering open and honest communication channels, individuals can better understand the root causes of problems and work towards finding practical solutions. Active listening, clear and concise articulation of thoughts and ideas, and the ability to empathize are all valuable communication skills that facilitate problem-solving.

Active listening involves fully engaging with the speaker, paying attention to both verbal and non-verbal cues, and seeking clarification when necessary. By actively listening, individuals can gain a deeper understanding of the problem at hand and the perspectives of others involved. This understanding is crucial for developing comprehensive and effective solutions.

Clear and concise articulation of thoughts and ideas is essential for effective problem-solving communication. By expressing oneself clearly, individuals can ensure that their ideas are understood by others. This clarity helps to avoid misunderstandings and promotes effective collaboration.

Empathy is a valuable communication skill that plays a significant role in problem-solving. By putting oneself in the shoes of others and understanding their emotions and perspectives, individuals can build trust and rapport. This empathetic connection fosters a supportive and collaborative environment where everyone feels valued and motivated to contribute to finding solutions.

In conclusion, problem-solving in the workplace requires a combination of essential skills such as analytical thinking, effective communication, collaboration, and adaptability. By honing these skills and fostering open communication channels, individuals can approach workplace problems with confidence and creativity, leading to practical and innovative solutions.

Real Scenarios of Workplace Problems

Now, let’s explore some real scenarios of workplace problems and delve into strategies for resolution. By examining these practical examples, individuals can develop a deeper understanding of how to approach and solve workplace problems.

Conflict Resolution in the Workplace

Imagine a scenario where two team members have conflicting ideas on how to approach a project. The disagreement becomes heated, leading to a tense work environment. To resolve this conflict, it is crucial to encourage open dialogue between the team members. Facilitating a calm and respectful conversation can help uncover underlying concerns and find common ground. Collaboration and compromise are key in reaching a resolution that satisfies all parties involved.

In this particular scenario, let’s dive deeper into the dynamics between the team members. One team member, let’s call her Sarah, strongly believes that a more conservative and traditional approach is necessary for the project’s success. On the other hand, her colleague, John, advocates for a more innovative and out-of-the-box strategy. The clash between their perspectives arises from their different backgrounds and experiences.

As the conflict escalates, it is essential for a neutral party, such as a team leader or a mediator, to step in and facilitate the conversation. This person should create a safe space for both Sarah and John to express their ideas and concerns without fear of judgment or retribution. By actively listening to each other, they can gain a better understanding of the underlying motivations behind their respective approaches.

During the conversation, it may become apparent that Sarah’s conservative approach stems from a fear of taking risks and a desire for stability. On the other hand, John’s innovative mindset is driven by a passion for pushing boundaries and finding creative solutions. Recognizing these underlying motivations can help foster empathy and create a foundation for collaboration.

As the dialogue progresses, Sarah and John can begin to identify areas of overlap and potential compromise. They may realize that while Sarah’s conservative approach provides stability, John’s innovative ideas can inject fresh perspectives into the project. By combining their strengths and finding a middle ground, they can develop a hybrid strategy that incorporates both stability and innovation.

Ultimately, conflict resolution in the workplace requires effective communication, active listening, empathy, and a willingness to find common ground. By addressing conflicts head-on and fostering a collaborative environment, teams can overcome challenges and achieve their goals.

Dealing with Workplace Stress and Burnout

Workplace stress and burnout can be debilitating for individuals and organizations alike. In this scenario, an employee is consistently overwhelmed by their workload and experiencing signs of burnout. To address this issue, organizations should promote a healthy work-life balance and provide resources to manage stress effectively. Encouraging employees to take breaks, providing access to mental health support, and fostering a supportive work culture are all practical solutions to alleviate workplace stress.

In this particular scenario, let’s imagine that the employee facing stress and burnout is named Alex. Alex has been working long hours, often sacrificing personal time and rest to meet tight deadlines and demanding expectations. As a result, Alex is experiencing physical and mental exhaustion, reduced productivity, and a sense of detachment from work.

Recognizing the signs of burnout, Alex’s organization takes proactive measures to address the issue. They understand that employee well-being is crucial for maintaining a healthy and productive workforce. To promote a healthy work-life balance, the organization encourages employees to take regular breaks and prioritize self-care. They emphasize the importance of disconnecting from work during non-working hours and encourage employees to engage in activities that promote relaxation and rejuvenation.

Additionally, the organization provides access to mental health support services, such as counseling or therapy sessions. They recognize that stress and burnout can have a significant impact on an individual’s mental well-being and offer resources to help employees manage their stress effectively. By destigmatizing mental health and providing confidential support, the organization creates an environment where employees feel comfortable seeking help when needed.

Furthermore, the organization fosters a supportive work culture by promoting open communication and empathy. They encourage managers and colleagues to check in with each other regularly, offering support and understanding. Team members are encouraged to collaborate and share the workload, ensuring that no one person is overwhelmed with excessive responsibilities.

By implementing these strategies, Alex’s organization aims to alleviate workplace stress and prevent burnout. They understand that a healthy and balanced workforce is more likely to be engaged, productive, and satisfied. Through a combination of promoting work-life balance, providing mental health support, and fostering a supportive work culture, organizations can effectively address workplace stress and create an environment conducive to employee well-being.

Practical Solutions to Workplace Problems

Now that we have explored real scenarios, let’s discuss practical solutions that organizations can implement to address workplace problems. By adopting proactive strategies and establishing effective policies, organizations can create a positive work environment conducive to problem-solving and productivity.

Implementing Effective Policies for Problem Resolution

Organizations should have clear and well-defined policies in place to address workplace problems. These policies should outline procedures for conflict resolution, channels for reporting problems, and accountability measures. By ensuring that employees are aware of these policies and have easy access to them, organizations can facilitate problem-solving and prevent issues from escalating.

Promoting a Positive Workplace Culture

A positive workplace culture is vital for problem-solving. By fostering an environment of respect, collaboration, and open communication, organizations can create a space where individuals feel empowered to address and solve problems. Encouraging teamwork, recognizing and appreciating employees’ contributions, and promoting a healthy work-life balance are all ways to cultivate a positive workplace culture.

The Role of Leadership in Problem Solving

Leadership plays a crucial role in facilitating effective problem-solving within organizations. Different leadership styles can impact how problems are approached and resolved.

Leadership Styles and Their Impact on Problem-Solving

Leaders who adopt an autocratic leadership style may make decisions independently, potentially leaving their team members feeling excluded and undervalued. On the other hand, leaders who adopt a democratic leadership style involve their team members in the problem-solving process, fostering a sense of ownership and empowerment. By encouraging employee participation, organizations can leverage the diverse perspectives and expertise of their workforce to find innovative solutions to workplace problems.

Encouraging Employee Participation in Problem Solving

To harness the collective problem-solving abilities of an organization, it is crucial to encourage employee participation. Leaders can create opportunities for employees to contribute their ideas and perspectives through brainstorming sessions, team meetings, and collaborative projects. By valuing employee input and involving them in decision-making processes, organizations can foster a culture of inclusivity and drive innovative problem-solving efforts.

In today’s dynamic work environment, workplace problems are unavoidable. However, by understanding common workplace problems, developing essential problem-solving skills, and implementing practical solutions, individuals and organizations can navigate these challenges effectively. By fostering a positive work culture, implementing effective policies, and encouraging employee participation, organizations can create an environment conducive to problem-solving and productivity. With proactive problem-solving strategies in place, organizations can thrive and overcome obstacles, ensuring long-term success and growth.

What is Team Morale and How to Boost It

Navigating through the maze: understanding types of organizational change, transform your business with a top change management consultant, what can we help you find.

281.412.7766
[email protected]
Learner Dashboard
GET YOUR CAUSE MAPPING TEMPLATE

About Cause Mapping®
What is Root Cause Analysis?
Cause Mapping® Method
Cause Mapping® FAQs
Why ThinkReliability?
Online Workshops
On-Demand Training Catalog
On-Demand Training Subscription
Company Case Study
Upcoming Webinars
Webinar Archives
Public Workshops
Private Workshops
Cause Mapping Certified Facilitator Program
Our Services
Facilitation, Consulting, and Coaching
Root Cause Analysis Program Development
Work Process Reliability™
Cause Mapping® Template
Root Cause Analysis Examples
Video Library
Articles and Downloads
About ThinkReliability
Client List
Testimonials

Problem Solving - 3 Basic Steps

Don't complicate it.

Problems can be confusing. Your problem-solving process shouldn’t make them more confusing. With a variety of different tools available, it’s common for people in the same company to use different approaches and different terminology. This makes problem solving problematic. It shouldn’t be.

Some companies use 5Whys , some use fishbone diagrams , and some categorize incidents into generic buckets like " human error " and " procedure not followed ." Some problem-solving methods have six steps, some have eight steps and some have 14 steps. It’s easy to understand how employees get confused.

6-sigma is another widely recognized problem-solving tool. It has five steps with its own acronym, DMAIC: define, measure, analyze, improve and control. The first two steps are for defining and measuring the problem . The third step is the analysis . And the fourth and fifth steps are improve and control, and address solutions .

3 Basic Steps of Problem Solving

As the name suggests, problem solving starts with a problem and ends with solutions. The step in the middle is the analysis. The level of detail within a problem changes based on the magnitude of an issue, but the basic steps of problem solving remain the same regardless of the type of problem:

Step 1. Problem

Step 2. analysis, step 3. solutions.

But these steps are not necessarily what everyone does. Some groups jump directly to solutions after a hasty problem definition. The analysis step is regularly neglected. Individuals and organizations don’t dig into the details that are essential to understand the issue. In the Cause Mapping® method, the point of root cause analysis is to reveal what happened within an incident—to do that digging.

Step 1. Problem

A complete problem definition consists of several different questions:

What is the problem?
When did it happen?
Where did it happen?
What was the total impact to each of the organization’s overall goals?

These four questions capture what individuals see as a problem, along with the specifics about the setting of the issue (the time and place), and, importantly, the overall consequences to the organization. The traditional approach of writing a problem description as a few sentences doesn’t necessarily capture the information needed for a complete definition. Some organizations see their problem as a single effect, but that doesn’t reflect the nature of an actual issue since different negative outcomes can occur within the same incident. Specific pieces of information are captured within each of the four questions to provide a thorough definition of the problem.

The analysis step provides a clear explanation of an issue by breaking it down into parts. A simple way to organize the details of an incident is to make a timeline . Each piece of the incident in placed in chronological order. A timeline is an effective way to understand what happened and when for an issue.

Ultimately, the objective of problem solving is to turn the negative outcomes defined in step 1 into positive results. To do so, the causes that produced the unwanted outcomes must be identified. These causes provide both the explanation of the issue as well as control points for different solution options. This cause-and-effect approach is the basis of explaining and preventing a problem solving. It’s why cause-and-effect thinking is fundamental for troubleshooting, critical thinking and effective root cause analysis.

Many organizations are under-analyzing their problems because they stop at generic categories like procedure not followed, training less than adequate or management systems . This is a mistake. Learning how to dig a littler further, by asking more Why questions, can reveal significant insight about those chronic problems that people have come to accept as normal operations.

A Cause Map™ diagram provides a way for frontline personnel, technical leads and managers to communicate the details of an issue objectively, accurately and thoroughly. A cause-and-effect analysis can begin as a single, linear path that can be expanded into as much detail as needed to fully understand the issue.

Solutions are specific actions that control specific causes to produce specific outcomes. Both short-term and long-term solutions can be identified from a clear and accurate analysis. It is also important for people to understand that every cause doesn’t need to be solved. Most people believe that 15 causes require 15 solutions. That is not true. Changing just one cause along a causal path breaks that chain of events. Providing solutions on more than one causal path provides additional layers of protection to further reduce the risk of a similar issue occurring in the future.

The Basics of Problem Solving Don't Change

These three steps of problem solving can be applied consistently across an organization from frontline troubleshooters to the executives. First principles should be the foundation of a company’s problem-solving culture. Overlooking these basics erodes critical thinking. Even though the fundamentals of cause-and-effect don’t change, organizations and individuals continue to find special adjectives, algorithms and jargon appealing. Teaching too many tools and using contrived terms such as “true root causal factors” is a symptom of ignoring lean principles. Don’t do that which is unnecessary.

Your problems may be complex, but your problem-solving process should be clear and simple. A scientific approach that objectively explains what happened and why (cause and effect) is sound. It’s the basis for understanding and solving a problem – any problem. It works on the farm, in the power plant, at the manufacturing company and at an airline. It works for the cancer researcher and for the auto mechanic. It also works the same way for safety incidents, production losses and equipment failures. Cause and effect doesn’t change. Just test it.

If you’re interested in seeing one of your problems dissected as a Cause Map diagram, send us an email or call the ThinkReliability office. We’ll arrange a call to step through your issue. You can also learn more about improving the way your organization investigates and prevents problems through one of our upcoming online webinars, short courses or workshops .

Want to learn more? Watch our 28-minute video on problem-solving basics.

Share This Post With A Friend

READ BY - - - - - - - - - -

Other Resources - - - - - - - - - -

Sign Up For Our eNewsletter

SoftwareDominos

The 7 Timeless Steps to Guide You Through Complex Problem Solving

As we go through life, we inevitably encounter problems that require extensive forethought, critical thinking , and creativity . Solving complex problems is a crucial skill for success, whether it’s a business challenge, a personal dilemma, or a societal issue.

This guide will explore the fundamentals of complex problem-solving and provide practical tips and strategies for mastering this critical skill.

This article is part of a series on complex problem-solving. The list below will guide you through the different subtopics.

Complex Problem-Solving Guide in 7 Steps

The Nature of Complex Problems

What Does the Nature of the Problem Tell Us About Its Solution

Gaussian Distributions vs Power Laws

Your Ultimate Guide to Making Sense of Natural and Social Phenomena

Complex Problem-Solving in Groups

An Exploratory Overview of ProbleSolving Processes in Groups

The Power of Critical Thinking

An Essential Guide for Personal and Professional Development

Group-Decision Making

6 Modes That Tell Us How Teams Decide

1. What Is a Complex Problem?

1.1 generic definition of complex problems.

Four properties allow us to distinguish complex problems from simple ones.

Complex problems accept alternative solutions
Choices can weighed in multiple ways
Data supports multiple hypotheses
Breakdown of causal chains.

In crude terms, a complex problem presents no trivial or obvious solution. In other words, it shows the following characteristics:

Now that we have defined the general notion of a complex problem, let’s look at some specific cases related to software development , business management , and complexity theory.

1.2 Complex Problems in Software Development

A complex software development problem involves intricate interactions between numerous system components and requires a sophisticated understanding of the business problem, computing , algorithms and data structures.

Source: “Domain-Driven Design: Tackling Complexity in the Heart of Software” by Eric Evans

1.3 Complex Problems in Business Management

In business management , a complex problem is characterized by interconnected elements, uncertainty, and dynamic interactions, making it challenging to predict outcomes and devise straightforward solutions. This is most obviously seen in formulating effective organisational strategies or leading successful enterprise transformations.

Source: “ Strategic Management and Organisational Dynamics: The Challenge of Complexity ” by Ralph D. Stacey

1.4 Complex Problems in Complexity Theory

From a complexity theory standpoint, a complex problem involves many interacting agents or components, often exhibiting emergent properties that cannot be easily deduced from the properties of individual agents.

Source: “ The Quark and the Jaguar: Adventures in the Simple and the Complex ” by Murray Gell-Mann

Complex problems are contrasted with complicated problems. Complicated problems have clear causes and effects, can be broken down into smaller parts, and have predictable solutions. Complex problems, however, are dynamic, have interconnected parts, and exhibit emergent properties (unpredictable outcomes from the interaction of parts).

Source: “Cynefin Framework” (2007) by Dave Snowden

1.5 What are Complex Problem Solving Skills?

Complex problem-solving skills involve identifying , analysing , and solving non-routine problems requiring high cognitive effort.

These problems typically involve a large number of variables and require the application of creative and critical thinking skills to identify potential solutions. Individuals with complex problem-solving skills can work through ambiguity and uncertainty and use logical reasoning to develop effective solutions.

2. Solving Complex Problems: A Generic Approach

While developing a universal solution that works in any context would be very challenging, we will describe a generic approach consisting of seven steps that will assist you in creating a bespoke method suitable to the specific context you are working in.

At the heart of this approach is logical decomposition , or breaking down a complex problem into smaller, more manageable ones and then developing and implementing effective solutions for each. It is a key skill essential for success in many areas of life, including business, education , and personal relationships.

Logical decomposition is at the heart of scientific thought, as described in Edsger W. Dijkstra’s paper “ On the Role of Scientific Thought “.

The seven steps to solving complex problems are listed below. We will go through them in great detail in the following sections.

The 7 steps to creative solutions

Complexity in Natural and Human Systems — Why and When We Should Care

3. Complex Problem-Solving Skills

3.1 why are complex problem solving skills essential.

In today’s rapidly changing world, individuals and organizations must possess complex problem-solving skills to succeed. These skills are essential for several reasons:

Dealing with Uncertainty

In many situations, there is no clear-cut solution to a problem. Complex problem-solving skills enable individuals to work through ambiguity and uncertainty and develop effective solutions.

Identifying Root Causes

Complex problems often have multiple causes that are difficult to identify. Individuals with complex problem-solving skills can identify and address the root causes of problems rather than just treating the symptoms.

Developing Creative Solutions

Complex problems require creative solutions that go beyond traditional approaches. Individuals who possess complex problem-solving skills can think outside the box and develop innovative solutions.

Achieving Business Success

Organizations with complex problem-solving skills are better equipped to overcome challenges, identify opportunities, and succeed in today’s competitive business environment.

3.2 How to Develop Complex Problem-Solving Skills

While some individuals possess a natural aptitude for complex problem-solving, these skills can be developed and improved over time. Here are some tips to help you develop complex problem-solving skills:

3.2.1 Build Your Knowledge Base

Developing complex problem-solving skills requires a strong foundation of knowledge in your area of expertise. Stay updated on your field’s latest trends, research, and developments to enhance your problem-solving abilities.

3.2.2 Practice Critical Thinking

Developing critical thinking skills is essential for complex problem-solving. Practice questioning assumptions, analyzing information , and evaluating arguments to develop critical thinking skills.

3.2.3 Embrace Creativity

Complex problems require creative solutions. Embrace your creativity by exploring new ideas, brainstorming solutions, and seeking diverse perspectives.

3.2.4 Collaborate with Others

Collaborating with others can help you develop your complex problem-solving skills. Working in a team environment can expose you to new ideas and approaches, help you identify blind spots, and provide opportunities for feedback and support.

3.2.5 Seek Out Challenging Problems

Developing complex problem-solving skills requires practice. Seek out challenging problems and apply your problem-solving skills to real-world situations.

4. Step 1: Understanding the Nature of Complex vs Complicated

4.1 the cynefin framework.

Complex and complicated problems are two distinct types of challenges that require different approaches to solve. Dave Snowden, a management consultant and researcher, developed the Cynefin framework, a conceptual model used to understand complex systems and situations. The framework identifies five domains: simple, complicated, complex, chaotic, and disordered, and guides how to approach challenges in each domain.

4.2 Complicated Problems

Complicated Problems:

are characterized by having many interrelated parts and require specialized knowledge and expertise to solve.
have a clear cause-and-effect relationship , and the solution can be discovered by systematically analysing the components.
are best addressed through a top-down, expert-driven approach , where the experts can identify the best solution through analysis and evaluation.

4.3 Complex Problems

Complex problems are characterized by uncertainty, ambiguity, and the involvement of multiple interconnected factors. There is no clear cause-and-effect relationship, and the solution cannot be found by simply analysing the components. Complex problems require a bottom-up, participatory approach, where multiple perspectives and ideas are considered to develop a solution. The solution may not be clear initially but involves experimentation, adaptation, and feedback.

The Cynefin framework proposes that complex problems belong to the complex domain, where emergent solutions cannot be predicted or prescribed. The complex domain should explore the problem, generate hypotheses, and test them through experimentation. The emphasis is on learning from the process , adapting to changing circumstances, and using feedback to guide the solution.

4.4 Practical Tips on Identifying an Appropriate Framework

Objective — Classify the problem as complex, complicated, or disordered. This classification will determine the approach to be used.

How it’s done — You can do that by asking the following questions.

Do we have multiple, internally consistent, competing hypotheses explaining the issue?
Does the available data support both theories?

In this case, the problem lies in the complex domain, and the preferred approach is to identify good solutions and conduct safe-to-fail experiments. If it’s a complicated (but not complex) problem, the following questions can be answered in the affirmative:

Do we have a single view that explains the problem?
Do we know the engineering part of the solution?
Is the problem sufficiently familiar to be solved by an expert?

5. Step 2: Identifying and Defining the Problem

5.1 problem identification.

The first step in problem-solving is identifying the problem. This step involves recognizing that a problem exists and understanding its nature. Some tips for identifying the problem include:

Once you have identified the problem, the next step is to define it. This step involves breaking down the problem into smaller parts and better understanding its nature. Some tips for defining the problem include:

Writing it down: Write down the problem statement clearly and concisely. This will help you to focus on the specific issue and avoid confusion.
Breaking it down: Break the problem into smaller parts to better understand its nature. This can help you to identify the underlying causes and potential solutions. The logical decomposition of the issues is vital, and we have dedicated the next section.
Identifying the scope: Identify the scope of the problem and determine its impact. This can help you to prioritize the problem and allocate resources accordingly.

Reliable data and statistical analysis skills are crucial in problem-solving. Data provides information and insights necessary for understanding the root cause of the problem. Statistical analysis allows us to make sense of the data and extract meaningful information. This article will discuss the importance of reliable data and statistical analysis skills in problem identification.

5.2 Practical Tips on Identifying the Problem

Objective — Paint a full picture of the problem by laying out the details, preferably on a piece of paper, classifying it, and deciding on an approach to solving it.

How it’s done — Write down a complete description of the problem, including its scope and impact on the various stakeholders or aspects of the business. Use data as evidence to support initial hypotheses. Find out if the problem is localised and can be resolved locally or whether it might need escalation and support from higher levels of management.

6. Step 3: Gathering and Analyzing Data

6.1 gathering reliable data.

In today’s fast-paced business environment, reliable data is more critical than ever. It is vital to have accurate and objective information to identify problems and determine their root cause.

Reliable data is the basis of any evidence-based decision-making, without which what we have is opinions and assumptions.

Without reliable data, it is difficult to make informed decisions that can lead to effective problem-solving. Here are some of the benefits of using reliable data in problem identification:

Objective information: Reliable data provides an objective perspective of the situation.
Evidence-based decision-making: Using reliable data ensures that decisions are based on evidence rather than assumptions or opinions.
Improved accuracy: Reliable data improves the accuracy of problem identification, leading to better solutions.
Better understanding: Reliable data provides a better understanding of the situation, leading to a more comprehensive and holistic approach to problem-solving.
Improved Risk Management : Reliable helps put problems into perspective by allowing analysts to calculate their occurrence probabilities and impacts. Based on impact and probability , risk can then be categorised and prioritized.

6.2 Statistical Analysis Skills

Statistical analysis skills are necessary for making sense of the data and extracting meaningful information. These skills allow us to identify patterns and trends, understand the relationships between different variables, and (sometimes) predict future outcomes.

How statistical analysis can help with complex problem solving.

Some benefits of using statistical analysis skills in problem identification include the following:

Identifying patterns: Statistical analysis skills enable us to identify patterns and trends in the data, which can help identify the problem accurately.
Understanding relationships: Statistical analysis skills help us understand the relationships between different variables, which can help identify the problem’s root cause.
Predictive capabilities: Statistical analysis skills allow us to predict future outcomes based on the data, which can help develop effective solutions.
Objective analysis: Statistical analysis provides objective data analysis, which can help make evidence-based decisions.

Interpreting data, however, requires technical skills to avoid misinterpretations. The following is a common list of statistical analysis mistakes non-professionals can make.

6.3 How Software Team Leads Can Gather Reliable Data

Software team leads need reliable data on their performance to make informed decisions and identify areas for improvement. Here are some sources where software team leads can gather reliable data on their team’s performance:

Project management tools: Most project management tools have built-in reporting features, allowing team leads to track performance metrics such as task completion rates, sprint velocity, and burn-down charts. This data can be used to identify areas for improvement and make data-driven decisions.
Team feedback: Gathering feedback from team members through one-on-one meetings or anonymous feedback forms can provide valuable insights into team performance . This data can help team leads identify areas where team members may struggle or additional training or resources may be needed. Crucially, it also provides insights into the organisational culture .
Code analysis tools like SonarQube or Code Climate can provide insights into code quality , maintainability, and security. This data can help team leads identify needed code improvements and prioritize technical debt reduction.
Customer feedback: Customer feedback, such as ratings, reviews, and support tickets, can provide insights into the usability and functionality of deployed applications. This data can help team leads identify areas for improvement and prioritize feature development.

The software team should gather data from multiple sources, use that data to inform decisions and identify areas for improvement. By using reliable data sources and monitoring team performance metrics regularly, software team leads can drive continuous improvement and ensure project success.

6.4 Practical Tips on Gathering Data to Support the Proposed Hypotheses

Objective — The availability of data can help place the problem into perspective. For example, a dollar figure of the losses due to process inefficiencies can help identify the potential solutions that management will deem feasible.

How it’s done — All modern project management and tracking tools have sophisticated built-in data capture tools that can be exported, cleaned, and analysed for insights.

For example, when evaluating a team’s productivity , you can export data from JIRA, Jenkins, or BitBucket and measure performance metrics such as team velocity, overruns, and time-to-market.

When evidence is insufficient, you can gather more data, abandon the hypothesis, or temporarily shelve it.

7 Step 4: Logical Decomposition in Problem Solving

7.1 logical decomposition.

Logical decomposition is a problem-solving technique that breaks down complex problems into smaller, more manageable pieces. It is a structured approach that enables individuals to examine a problem from multiple angles, identify key issues and sub-problems, and develop a solution that addresses each piece of the problem.

The process of logical decomposition involves breaking down the main problem into smaller sub-problems, which are then broken down into smaller pieces. Each piece is analyzed in detail to determine its underlying cause-and-effect relationships and potential solutions. By breaking down the problem into smaller pieces, the individual can better understand the overall problem, identify potential solutions more easily, and prioritize which sub-problems to address first.

Logical decomposition is particularly useful for dealing with complex issues, as it allows individuals to break down a large, overwhelming problem into smaller, more manageable pieces. This not only makes the problem easier to understand and solve but also makes it less daunting and more approachable. Additionally, by breaking down the problem into smaller pieces, individuals can identify and focus on the underlying root causes of the problem rather than just treating the symptoms.

Logical decomposition is a vital stage of architecting large systems and solutions.

7.2 Practical Tips on Logical Decomposition

Objective — Most problems worth tackling are also overwhelming in size and complexity (or complicatedness). Luckily, a logical decomposition into specialized areas or modules will help focus the team’s efforts on a small enough subproblem or bring in the right expertise.

How it’s done — This author prefers mindmaps. A mindmap is a tree that starts with a single node and branches off into different areas, views, or perspectives of the problem. Mindmaps help analysts stay focused on a key area and ensure that all aspects of a problem are covered.

Once a mindmap has been created, potential solutions can be explored.

From Abstract Concepts to Tangible Value: Solution Architecture in Modern IT Systems

8. Step 5: Generating and Evaluating (Several) Potential Solutions

Generating multiple solutions to solve a problem is an effective way to increase creativity and innovation in problem-solving. By exploring different options, individuals can identify the strengths and weaknesses of each solution and determine the most effective approach to solving the problem. This section will discuss the advantages and techniques of generating multiple solutions to solve problems more effectively.

8.1 Advantages of Generating Multiple Solutions

The advantages of generating multiple solutions during problem-solving are:

8.2 Techniques for Generating Multiple Solutions

Techniques for generating multiple solutions:

8.3 Practical Tips on Solution Generation and Selection

Objective — The key principle of solution generation is comprehensively exploring the solution space. This exploration allows teams to avoid local minima or overcommitting to a suboptimal solution.

How it’s done — The most effective approach is to bring in several people from different areas of expertise or seniority and to offer every suggestion the opportunity to be heard and thoroughly explored.

Also, different stakeholders might favour solutions that maximise their (potentially) narrow gains. If not consulted, they might actively block the implementation of the selected solution if it adversely impacts their interests.

The technical aspect of problem-solving is relatively easy to generate and implement without budgetary or scheduling constraints . It’s only when you consider the cost and impact of a solution that complexity arises.

5 Key Concepts You Need to Know From Herbert Simon’s Paper on the Architecture of Complexity

9. Step 6: Implementing and Assessing Solutions

Implementing solutions to complex problems requires a structured approach that considers the unique challenges and variables involved. Effective problem-solving involves implementing practical, feasible, and sustainable solutions.

This section will first discuss two approaches to implementing solutions to complex problems: small, safe-to-fail solutions and solving easy problems with large benefits.

9.1 Implementing Many Safe-to-Fail Solutions

One effective approach to implementing solutions to complex problems is small, safe-to-fail solutions. This technique involves implementing a small-scale solution that can be tested quickly and easily to gather feedback.

Exploring multiple paths allows analysts to avoid over-commitment to suboptimal solutions.

Starting with small-scale solutions allows individuals to gather feedback and adjust before investing significant resources in a larger solution. This approach can save time and resources while ensuring that the final solution meets the needs of stakeholders.

Small safe-to-fail experiments effectively deal with complexity where an engineering solution is unknown priori.

9.2 Prioritizing High-Yield Solutions

Another effective approach to implementing solutions to complex problems is to first solve easy problems with large benefits. This technique involves identifying and solving simple, straightforward problems that significantly impact the overall problem.

By prioritising easy problems, individuals can progress quickly and gain momentum towards solving the larger problem. This approach can also help build trust and credibility with stakeholders, as progress is visible and measurable.

9.3 A Systematic Approach to Implementing Solutions

It is important to note that both approaches should be used with a broader problem-solving methodology . Effective problem-solving requires a systematic approach that involves identifying the problem, gathering information, analyzing data, developing and evaluating potential solutions, and implementing the best solution. By implementing small, safe-to-fail solutions and solving easy problems with large benefits, individuals can enhance their problem-solving approach and increase the likelihood of success.

In conclusion, implementing solutions to complex problems requires a structured approach that considers the unique challenges and variables involved. Implementing small, safe-to-fail solutions and solving easy problems with large benefits are two effective techniques for enhancing problem-solving. These techniques should be used with a broader problem-solving methodology to ensure the final solution is practical, feasible, and sustainable.

9.4 Implementing the Solution

Objective — This stage aims to efficiently and effectively implement the (optimal) selected solution(s).

How it’s done — Three principal techniques are required for the implementation of the solution to succeed. The first is conducting safe-to-fail experiments. The second is allocating resources to conduct each experiment. The third is setting up the criteria for success or failure.

10. Step 7: Evaluating the Solution

Objective — Solutions might work well under laboratory conditions but fail spectacularly in the field. Evaluating solutions after a trial is vital to avoid continuing investment in failed solutions.

How it’s done — The best way to evaluate a solution is to monitor the Key Performance Indicators (KPIs) originally used in the problem diagnosis. When solutions are successful, noticeable and measurable improvements should be observed.

Measuring second-order effects or observing undesirable team or business dynamics changes is key to continuing or aborting initiatives.

Complex problem-solving refers to the ability to solve complex, ambiguous problems that often require creative and innovative solutions. It involves identifying the root cause of a problem, analyzing different variables and factors, developing and evaluating possible solutions, and selecting the best course of action.

Complex problem-solving is essential because it allows individuals and organizations to overcome challenges and obstacles hindering their progress and success. It enables them to identify opportunities, improve processes, and innovate to stay ahead of the competition.

To develop your complex problem-solving skills, you can practice consistently, develop a systematic approach, and leverage the right tools and resources. You can also seek feedback from others, learn from your mistakes, and adopt a growth mindset that values continuous learning and improvement.

Some common obstacles to effective problem-solving include cognitive biases , lack of information, unclear objectives, and groupthink. These obstacles can hinder individuals and teams from developing effective solutions to complex problems.

Various tools and techniques for complex problem-solving include root cause analysis, fishbone diagrams, SWOT analysis, Pareto analysis, decision trees, and scenario planning. These tools can help individuals and teams to analyze complex problems, identify underlying causes, and develop effective solutions.

To improve your decision-making skills, you can develop a structured approach, gather and analyze relevant data, evaluate different options, and consider each alternative’s potential risks and benefits. You can also seek feedback from others and reflect on your past decisions to learn from your mistakes.

Complex problem-solving skills can be applied in various aspects of your personal life, such as improving your relationships, managing your finances, and achieving your goals. You can overcome obstacles and succeed personally by systematically analyzing different variables and factors and developing creative and innovative solutions.

To overcome cognitive biases in problem-solving, you can challenge your assumptions, seek diverse perspectives, and use data and evidence to inform your decisions. You can also use brainstorming and mind-mapping techniques to generate new ideas and avoid tunnel vision.

12. Final Words

In conclusion, complex problem-solving is a crucial skill that can significantly impact your professional and personal life. It allows you to navigate complex challenges, identify the root cause of a problem, and develop effective solutions.

By mastering the art of complex problem-solving, you can enhance your critical thinking, analytical skills, and decision-making abilities, which are essential for success in today’s fast-paced and dynamic business environment.

The key to mastering complex problem-solving is to practice consistently, develop a systematic approach, and leverage the right tools and resources. With patience, persistence, and a growth mindset, anyone can become a skilled problem solver and tackle even the most challenging problems.

Decision Making In a Professional Environment: Techniques and Pitfalls

7 problem-solving strategies to overcome project hurdles

Unexpected problems are unavoidable in business. Whether it’s a workplace conflict between two coworkers or a sudden change in industry regulations, problem-solving strategies and skills are crucial if you want to be successful.

Each industry and individual career has its own set of unique challenges that require different approaches. The trick is to have a fully loaded problem-solving toolkit ready to go when problems arise.

In this article, we’ll break down the problem-solving process and then dive into seven of the most powerful problem-solving strategies.

What are problem-solving strategies?

Problem-solving strategies help you break down, analyze and resolve problems. They take you beyond obvious answers and help you find the best solution to your specific problem.

Whether your problem is a business challenge, personal conflict or technical work issue, problem-solving strategies help replace random guesswork with detailed blueprints.

In sales and marketing, problem-solving strategies are used as guidelines to figure out the best way to resolve industry challenges. These strategies can be put in place ahead of time so that when fires arise, you have the tools required to put them out.

Different problem-solving strategies are designed for different types of problems. While one problem requires a strategy that uses creative thought and experimentation, another problem might require a heavily analytical approach.

Before we dive into specific strategies, let’s take a look at the foundations of good problem-solving.

The four essential steps to problem-solving

To solve a problem, you need to identify it, conceptualize solutions, decide on the best solution and then put the solution into action.

While all problem-solving strategies approach these steps differently, each step is integral to the process, so let’s take a look at the four steps in detail.

1. Identify and define the problem

To solve a problem effectively, you need to know exactly what it is. Trying to solve a vague problem is like trying to fill a bucket with a hole in it. Any solutions you implement will be based on guesswork and probably won’t solve the problem in its entirety.

To identify your problem, remember:

Clarify with a statement. It’s far easier to solve a clear problem. Use journalistic questioning (who, what, where, when, why and how) to clarify the problem as far as possible. Then create a problem statement that defines your problem in simple terms.

Break the problem down. Problems are often complex with a lot of distracting information. The trick is to identify key parts of the problem and, if necessary, break it down into smaller problems that you can solve individually.

Visualize the problem. If the problem you’re dealing with is abstract or particularly complex, it can help to try to build a mental picture of it. For example, if your problem is with your sales software, visually map out the elements of the program and how you use it. This lets you see each step and pinpoint where issues may originate.

Example: Your team’s sales productivity is lower than it should be. You investigate and realize that your sales process is disorganized, causing opportunities to slip through the cracks. You break the problem down to look at each part of the process and find that your sales reps don’t have a standardized way of tracking customer interactions.

2. Brainstorm possible solutions

With the problem clearly defined, your next step is to generate an exhaustive list of potential solutions. The purpose of this step is to work out everything you could possibly do so that you can narrow it down later.

Here are some tips for effective brainstorming:

If you’re working with a team, have them brainstorm ideas before the meeting. Prior to the brainstorming meeting, provide background information so everyone has some ideas ready by the time you meet and you can get to a solution faster.

Include key stakeholders. Who does the problem mainly affect? This is the group of people you should include in the solution-finding process, as they will have the deepest understanding of the problem.

Include every solution and narrow them down later. Begin by getting as many ideas written down as possible. This will get the creative juices flowing and help you consider all angles to develop a more effective solution.

Example: You send out your findings about the gaps in the sales process in advance and ask each sales team member to bring a few proposed solutions to share. During the meeting, you set a ground rule that you won't discuss or critique ideas until they’re all on the table. By the end, a series of solutions are suggested, including introducing new tools to track the customer journey, automate repetitive tasks and set follow-up reminders.

3. Decide on a single solution

Now that you have a list of solutions, it’s time to decide which are likely to be the most effective. To do this, you need to evaluate each in order until you have a short list of promising solutions.

To help evaluate your solutions, consider whether:

The solution will achieve your desired outcomes without causing additional issues

The solution aligns with your organizational goals

The solution is affordable and realistic with your current resources and constraints

This step is often the most difficult and requires effective decision-making abilities in addition to problem-solving skills. Often, there will be several solutions that vary in their projected cost, effectiveness and difficulty to implement and you’ll need to take all this into account when making a decision.

Example: Based on your brainstorming session, you decide that the best solution is to invest in a customer relationship management (CRM) system. This will allow you to set up a consistent process and will easily pay for itself in increased productivity. The CRM’s reporting features will also provide greater insight into your sales team’s performance, helping you improve processes further based on what’s working.

4. Implement the solution

Finally, it’s time to put the solution in place. Depending on the complexity of the problem you’re trying to solve, this may require additional steps. For example, you might need to develop a detailed action plan for several team members and then monitor their effectiveness going forward.

To ensure that your solution remains effective:

Schedule regular feedback meetings. Regular feedback from the people closest to the problem will help you gauge whether the solution has been effective and how and when you may need to make adjustments over time.

Decide on key metrics before implementing the solution. Which metrics will tell you whether your solution is working? For example, if your problem is tech-related, you could judge whether the solution worked based on how many IT requests come in each month. Determine what you’ll need to measure upfront.

Don’t be afraid to try again. If your solution didn’t work, it’s time to go back to the drawing board. Get your short list of possible solutions out again and reevaluate them based on what you’ve learned. You might find that another solution works better now that you have more data.

Example: You invest in a CRM solution for your team. A week after onboarding your team, you meet to discuss how the software is working for your team. Based on the discussion, you discover ways to optimize your sales process further.

Seven powerful problem-solving strategies

The type of problem you’re facing will determine how you approach each step in the problem-solving process. Different problems require different creative thinking, critical thinking and brainstorming techniques to come to a solution.

To help you sort out your approach, here are seven different strategies you can use to tackle different kinds of problems:

1. The trial-and-error approach

Trial-and-error is a step-by-step problem-solving approach that’s most effective for problems with many possible solutions. As you test each solution rapidly in order, you’ll find the best fit as quickly as possible.

For this reason, trial-and-error problem-solving is incredibly useful in fields like tech support.

For example, imagine your internet connection drops out. There could be more than one possible cause for this, so quickly running through a checklist of solutions (like checking if your provider is down and restarting the router) is the most effective method.

However, when you’re dealing with large, serious issues, the trial-and-error approach is tantamount to guesswork and may introduce more problems than it fixes.

2. The 5 Whys

The 5 Whys process is a systematic problem-solving method with a simple premise: Keep asking “Why?” until you discover the root cause of an issue.

In good problem-solving, people will often try to solve a surface-level issue without investigating any deeper. The problem many surface-level problems are themselves caused by prior problems that went unchecked.

The 5 Whys process helps uncover these root causes. It also provides a framework for you to work through more complex problems. With the framework in place, it’s much easier to develop a plan to solve each part of the problem in turn.

How to use the 5 Whys:

Write down the surface-level problem.

Ask why the problem has occurred and write the answer below the original problem.

If the answer isn’t the root cause of the problem, repeat step 2 until you find the root (five times is usually all it takes, hence the name).

Here’s what this looks like in practice:

The overarching problem: You aren’t generating enough sales leads. Why #1: Your website isn’t receiving enough traffic. Why #2: Your website isn’t optimized for sales lead generation . Why #3: You don’t have any landing pages or effective calls-to-action (CTAs). Why #4: You haven’t allocated enough of your marketing budget to hire an in-house marketer or agency.

Once you find the root cause, you can easily develop a solution by working backward. In this example, you can clearly see that a potential solution to the overarching problem is to invest in a role that can drive website optimization for lead generation .

3. Problem tree analysis

Problem tree analysis is the process of mapping out the causes and effects of a problem. The causes become the roots of the tree, while the consequences become the branches. Once mapped out, the tree can be inverted to become a solution tree.

Here’s how a problem tree might look for a company struggling to move prospects past the sales demo in their sales process:

This format helps break a problem down into manageable chunks so you can prioritize key objectives. Here’s how to use problem tree analysis:

Identify and write down the problem. Write it in the center of a piece of paper in negative form (for example, “sales process stall after on-site demos”). This will be the “trunk” of the tree and is the focal issue.

Work out the causes of the problem. Write these below the problem and use arrows to connect them – these are the “roots” of the problem tree. Dig deeper to find whether each cause has further causes (you can use the 5 Whys process for this).

Write down the consequences of the problem above the cause. These are the “branches” and connect to the “trunk” in the same way that the “roots” do.

Analyze the tree to ensure it’s complete. If you’re certain that everything is covered, highlight the most serious causes and consequences, as well as the ones that are the easiest to address.

Create a solution (or objective) tree. Flip all negatives into positives. For example, the problem “sales process stall after on-site demo” would become the desired outcome “on-site demos help close deals”. Replace each cause and consequence with its positive counterpart to see how to correct the problem. Turning root causes into root solutions quickly establishes solution starting points.

Double-check your solution tree. Make sure each of your solutions is clear and realistic and there are no gaps between causes or consequences.

Implement a solution. Select your preferred solution and begin to work toward it using the solution tree as your blueprint.

4. SWOT analysis

SWOT analysis is a strategic planning and sales management technique that can also be used as an effective problem-solving strategy.

Start by identifying the problem and coming up with a list of solutions. You can then use SWOT analysis to determine which solution is most suitable for your situation:

What are its strengths? Why is this solution the best fit for the problem at hand? How does it solve the problem better than other solutions might?

What are its weaknesses? Are there any ways this solution is lacking? Can you do anything to remove or strengthen those weaknesses?

Does it open up any opportunities? Does this solution provide any further benefits or opportunities?

Does it introduce any threats? Are there any risks involved with this solution? Could it backfire in any way?

This will help you compare solutions and choose the best one.

This approach works best with complex problems that have multiple possible solutions as it helps you consider their potential impact within your organization.

5. Means-end analysis

Means-end analysis is a problem-solving strategy that involves working out what you need to do (the means) to get to a certain outcome (the end).

You start by defining both your current situation and your ideal situation. You then determine solutions to get from one to the other.

For example, say your problem is that you want to increase sales performance . Your starting point is your current sales metrics while the outcome (end) is the number of sales you want to reach.

Then, develop a list of likely obstacles that might prevent you from reaching your goal and devise solutions to overcome each.

In the above example, you might find that a competitor is offering better deals on their products. You can then devise the solution of creating a new sales promotion or focusing your messaging on a unique attribute of your product.

6. Consult an expert

While this isn’t a creative problem-solving methodology, it is effective.

When problems arise that are completely outside of your expertise, attempting to solve them yourself is often time-consuming and costly. Most organizations simply don’t have the time or resources to create detailed strategies for complex, highly specific problems.

In many industries, there are expert consultants you can hire to help you solve your issues in a fraction of the time that it would take you on your own.

You wouldn’t attempt to replace your home’s hot water system with no experience in plumbing, you’d call in an expert. Sometimes it’s best to approach complex problems with the same mentality.

7. Work from experience

Use your experience with similar or related past problems to work out a solution based on a calculated guess. Working from a framework or strategy you’ve already established (such as an algorithm or formula, often called a heuristic approach), is a mental shortcut that helps you come up with answers quickly.

For example, say a previous organization you worked for reduced customer complaints by having sales reps follow up with customers within one week of purchase. When your current company has an urgent need to improve customer feedback, you draw from your experience and propose implementing rapid follow-up. The team then compares the solution with your current problem to gauge whether it might help in this case, too.

Heuristics are a quick way to get to a solution, and though it may not be the optimal final solution, this is a helpful approach when you need a fast fix.

Supplemental strategies for optimal problem-solving

Here’s a list of general strategies that can be applied to any problem-solving technique to help you devise a better solution in less time.

Don’t reject any ideas (at first). Fully consider your options when coming up with a solution. Many solutions could work, but some will be quicker, cheaper or more effective than others. Likewise, team members may hold back potential solutions for fear of immediate rejection. Instead, list them all at first and narrow them down later.

Set a deadline. Some problems are tedious to solve so they get put on the back burner. To keep easily fixed issues from remaining on hold indefinitely, set a deadline. Establishing a stopping point will increase the chances that you’ll find a solution within the time frame.

Introduce a mediator. If you have a sensitive issue like a personal conflict between two employees, it can help to introduce a neutral third party. A mediator can help reduce tensions and approach the conflict from an unbiased perspective.

Drop the assumptions. Assumptions can be one of the biggest obstacles to successful problem-solving. If you’re biased toward a particular solution or have unfounded presumptions about particular constraints, you may pass over effective solutions.

Reframe the problem as an opportunity. If you approach every problem with a negative mindset, you’ll think of the solution as an unwanted burden or cost. Instead, try to think of the problem as a challenge or opportunity. When you see it as a chance to improve your results and further your business, you’ll be eager to implement solutions.

Distance yourself from the problem. Problem-solving can require intense discussions and deep critical thought. It can help to distract yourself from the issue for a while and then return with a fresh mind. Instead of dwelling on a problem, try sleeping on it. You might find that your mind is open to new ideas when you return.

Final thoughts

Problems are a constant when you’re running a business. The key to success is preparation. With the right tools and problem-solving methodologies, nothing can stop you.

Look for strategies that address your specific problems and don’t forget to celebrate when you crack a tough problem.

Driving business growth

Full access. No credit card needed.

Customer success vs. account management: a comparison

An in-depth comparison of customer success vs account management. Discover how they work most effectively to help customer retention rates and loyalty.

The AIDA model: A marketing magic formula

We show you how the AIDA model can help you quickly and strategically plan and implement marketing tools.

How to become a project manager (and why it’s a great career)

Project managers are more valuable to businesses than they’ve ever been. Learn what it takes to build a career in project management with our step-by-step guide.

Seven Steps of Generic Problem Solving And Tips and Hints for Creating Actions at Meetings

by Martin Gummery | Dec 19, 2019 | Tools For Change | 0 comments

I thought I would share some work shared in the past.

Many years ago, when I first embarked on World Class Tools and Techniques and becoming a Management Consultant, I thought the business world would be perfect by 2020. Phew, I got that wrong!

Problems continue to plague companies and worse than that, companies still have the same problems repeating again and again. So here are some tips I learnt number of years ago.

1. Define The Problem

This is often where people struggle. They react to what they think the problem is. Instead, seek to understand more about why you think there’s a problem.

Ask yourself and others, the following questions:

What can you see that causes you to think there’s a problem?
Where is it happening?
How is it happening?
When is it happening?
With whom is it happening? (HINT: Don’t jump to “Who is causing the problem?” When we’re stressed, blaming is often one of our first reactions. To be an effective manager, you need to address issues more than people.)
Why is it happening?
Write down a description of the problem in terms of “The following should be happening, but isn’t …” or “The following is happening and should be: …” As much as possible, be specific in your description, including what is happening, where, how, with whom and why. (It may be helpful at this point to use a variety of research methods.

Defining complex problems:

If the problem still seems overwhelming, break it down by repeating steps 1-7 until you have descriptions of several related problems.

Verifying your understanding of the problems:

It helps a great deal to verify your problem analysis for conferring with a peer or someone else.

Prioritize the problems:

If you discover that you are looking at several related problems, then prioritize which ones you should address first.

Note the difference between “important” and “urgent” problems. Often, what we consider to be important problems to consider are really just urgent problems. Important problems deserve more attention. For example, if you’re continually answering “urgent” phone calls, then you’ve probably got a more “important” problem and that’s to design a system that screens and prioritizes your phone calls.

Understand your role in the problem:

Your role in the problem can greatly influence how you perceive the role of others. For example, if you’re very stressed out, it’ll probably look like others are too, and you may resort too quickly to blaming and reprimanding others. Or, you are feeling very guilty about your role in the problem and you may ignore the accountabilities of others.

2. Look at potential causes for the problem

It’s amazing how much you don’t know about what you don’t know. Therefore, in this phase, it’s critical to get input from other people who notice the problem and who are affected by it.
It’s often useful to collect input from other individuals one at a time (at least at first). Otherwise, people tend to be inhibited about offering their impressions of the real causes of problems.
Write down your opinions and what you’ve heard from others.
Regarding what you think might be performance problems associated with an employee; it’s often useful to seek advice from a peer or your supervisor in order to verify your impression of the problem.
Write down a description of the cause of the problem and in terms of what is happening, where, when, how, with whom and why.

3. Identify alternatives for approaches to resolve the problem

At this point, it’s useful to keep others involved (unless you’re facing a personal and/or employee performance problem). Brainstorm for solutions to the problem. Very simply put, brainstorming is collecting as many ideas as possible, and then screening them to find the best idea. It’s critical when collecting the ideas to not pass any judgment on the ideas — just write them down as you hear them. (A wonderful set of skills used to identify the underlying cause of issues is Systems Thinking.)

4. Select an approach to resolve the problem

When selecting the best approach, consider:

Which approach is the most likely to solve the problem for the long term?
Which approach is the most realistic to accomplish for now? Do you have the resources? Are they affordable? Do you have enough time to implement the approach?
What is the extent of risk associated with each alternative?

(The nature of this step, in particular, in the problem solving process is why problem solving and decision making are highly integrated.)

5. Plan the implementation of the best alternative (this is your action plan)

Carefully consider “What will the situation look like when the problem is solved?”
What steps should be taken to implement the best alternative to solving the problem? What systems or processes should be changed in your organization, for example, a new policy or procedure? Don’t resort to solutions where someone is “just going to try harder”.
How will you know if the steps are being followed or not? (these are your indicators of the success of your plan)
What resources will you need in terms of people, money and facilities?
How much time will you need to implement the solution? Write a schedule that includes the start and stop times, and when you expect to see certain indicators of success.
Who will primarily be responsible for ensuring implementation of the plan?
Write down the answers to the above questions and consider this as your action plan.
Communicate the plan to those who will be involved in implementing it and, at least, to your immediate supervisor.

(An important aspect of this step in the problem-solving process is continual observation and feedback.)

6. Monitor implementation of the plan

Monitor the indicators of success:

Are you seeing what you would expect from the indicators?
Will the plan be done according to schedule?
If the plan is not being followed as expected, then consider: Was the plan realistic? Are there sufficient resources to accomplish the plan on schedule? Should more priority be placed on various aspects of the plan? Should the plan be changed?

7. Verify if the problem has been resolved or not

One of the best ways to verify if a problem has been solved or not is to resume normal operations in the organization. Still, you should consider:

What changes should be made to avoid this type of problem in the future? Consider changes to policies and procedures, training, etc.
Lastly, consider “What did you learn from this problem solving?” Consider new knowledge, understanding and/or skills.
Consider writing a brief memo that highlights the success of the problem solving effort, and what you learned as a result. Share it with your supervisor, peers and subordinates.

Martin Gummery, Managing Director, NewLeaf International Ltd

Tel: 01905 425209

Email: [email protected]

Download the Newleaf Integration Framework eBook

See exactly how Newleaf can help you, download our eBook now.

You have successfully requested a download of our eBook!

NewLeafInternational
https://www.linkedin.com/company/newleaf-international-ltd

Problem-Solving Theory: The Task-Centred Model

Living reference work entry
First Online: 12 April 2022
Cite this living reference work entry

Blanca M. Ramos 5 &
Randall L. Stetson 6

Part of the book series: Social Work ((SOWO))

570 Accesses

This chapter examines the task-centred model to illustrate the application of problem-solving theory for social work intervention. First, it provides a brief description of the problem-solving model. Its historical development and key principles and concepts are presented. Next, the chapter offers a general overview of the crisis intervention model. The task-centred model and crisis intervention share principles and methods drawn from problem-solving theory. The remainder of the chapter focuses on the task-centred model. It reviews its historical background, viability as a framework for social work generalist practice, as well as its applicability with diverse client populations and across cultural settings. The structured steps that guide task-centred implementation throughout the helping process are described. A brief critical review of the model’s strengths and limitations is provided. The chapter concludes with a brief summary and some closing thoughts.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Institutional subscriptions

Brieland D (1977) Historical overview. Soc Work 22(5):341–346. http://www.jstor.org.libezproxy2.syr.edu/stable/23712810

Google Scholar

Coady N, Lehmann P (2016) The problem-solving model: a framework for integrating the science and art of practice. In: Lehmann P, Coady N (eds) Theoretical perspectives for direct social work practice: a generalist-eclectic approach, 3rd edn. Springer

Chapter Google Scholar

D’Zurilla TJ, Goldfried MR (1971) Problem solving and behavior modification. J Abnorm Psychol 78(1):107–126. https://doi.org/10.1037/h0031360

Article Google Scholar

Dattilio F (1998) Cognitive behavioral therapy. In: Dattilio M (ed) Case studies in couple and family therapy: systems and cognitive perspectives. Guilford, New York, pp 62–82

Dohert W (1981) Cognitive processes in intimate conflicts: extending attribution theory. Am J Fam Ther 9:3–12

Duckword G (1967) A project in crisis intervention. Soc Casework 48(4):227–231

Fortune AE (2012) Development of the task-centered model. In: Rzepnicki TL, McCracken SG, Briggs HE (eds) From task-centered social work to evidence-based and integrative practice: reflections on history and implementation. Oxford University Press, pp 15–39

Fortune AE, Reid WJ (2011) Task-centered social work. In: Turner F (ed) Social work treatment: interlocking theoretical approaches, 6th edn. Oxford University Press, New York, pp 513–532

Fortune AE, McCallion P, Briar-Lawson K (Eds.) (2010) Social work practice research for the 21st century. New York: Columbia University Press

Fortune AE, Ramos BM, Reid WJ (2022) Task-Centered practice. In: Lisa Rapp-McCall, Kevin Corcoran & Albert R. Roberts, (eds.), Social workers’ desk reference, 4th edn Oxford University Press, New York

Fortune AE, Ramos BM, Reid WJ (2022) Task-Centered Practice. In: Lisa Rapp-McCall, Kevin Corcoran, Albert R Roberts, (Eds.). Social Workers’ Desk Reference, 4th edition. New York: Oxford University Press

Garfield SL (1994) Research on client variables in psychotherapy. In: Bergin A, Garfield S (eds) Handbook of psychotherapy and behavior change, 4th edn. Wiley, New York, pp 190–228

Golan N, Carey H, Hyttinnen E (1969) The emerging role of the social worker in the psychiatric emergency service. Community Ment Health J 5(1):55–61

Gorey KM, Thyer BA, Pawfuck DE (1998) Differential effectiveness of prevalent social work practice models: a meta-analysis. Soc Work 43:269–278

Hollis F (1970) The psychosocial approach to the practice of casework. In: Theories of social casework. University of Chicago Press, pp 33–75

Hoyt MF (2000) Some stories are better than others: doing what works in brief therapy and managed care. Brunner/Mazel, Philadelphia

Hubble M, Duncan B, Miller S (1999) Introduction. In: Hubble M, Duncan B, Miller S (eds) The heart and soul of change: what works in therapy. American Psychological Association, Washington, DC

Huh NS, Koh YS (2010) Task-centered practice in South Korea. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 235–239

Jagt N, Jagt L (2010) Task-centered practice in the Netherlands. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 208–212

Lo TW (2010) Task-centered practice in Hong Kong. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 240–244

Malouff JM, Thorsteinsson EB, Schutte NS (2007) The efficacy of problem-solving therapy in reducing mental and physical health problems: a meta-analysis. Clin Psychol Rev 27(1):46–57

Marsh P (2010) Task-centered practice in Great Britain. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 203–2007

Marsh P, Doel M (2005) The task-centred book. Routledge, Abingdon/New York

Book Google Scholar

Miley K, O’Melia M, DuBois (2017) Generalist social work practice: an empowering approach. Allyn & Bacon, Boston

Morris B (1968) Crisis intervention in a public welfare agency. Soc Casework 49(10):612–617

Naleppa M (2010) Task-centered practice in Germany. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 213–216

Nezu AM, Nezu CM, D’Zurilla T (2012) Problem-solving therapy: a treatment manual. Springer

Nichols M, Schwartz R (2001) Family therapy. Allyn and Bacon, Needham Heights

Parad HJ (1958) Ego psychology and dynamic casework. Family Association of America, New York

Parad H (1965) Preventive casework: problems and implications. In: Parad H (ed) Crisis intervention: selected readings. Family Service Association of America, New York

Parad H (1966) The use of time-limited crisis interventions in community mental health programming. Soc Serv Rev 40(3):275–282

Parad H, Capland G (1960) A framework for studying families in crisis. Soc Work 5(3):3–15

Parad H, Parad G (1968) A study of crisis oriented planned short-term treatment. Soc Casework 49(6):346–355

Payne M (2014) Modern social work theory, 3rd edn. Palgrave Macmillan, Basingstoke

Perlman HH (1957) Social casework: a problem-solving process. University of Chicago Press, Chicago

Poal P (1990) Introduction to the theory and practice of crisis intervention. Quadernos Psicol 10:121–140

Ramos BM, Garvin C (2003) Task centered treatment with culturally diverse populations. In: Tolson E, Reid W, Garvin C (eds) Generalist practice: a task centered approach, pp. Columbia University Press, New York, pp 441–463

Ramos B, Tolson E (2016) The task-centered model. In: Lehmann P, Coady N (eds) Theoretical perspectives for direct social work practice: a generalist-eclectic approach, 3rd edn. Springer

Regehr C (2017) Crisis theory and social work treatment. In: Turner F (ed) Social work treatment: interlocking theoretical approaches. Oxford University Press

Reid WJ (1992) Task strategies: an empirical approach to social work practice. Columbia University Press, New York

Reid WJ, Epstein L (eds) (1972) Task-centered casework. Columbia University Press, New York

Reid W, Ramos B (2002) Intervención “Centrada en la Tarea”, un Modelo de Práctica de Trabajo Social. Rev Treball Soc 168:6–22

Reid WJ, Shyne AW (1969) Brief and extended casework. Columbia University Press, New York

Roberts A (2005) Bridging the past and present to the future of crisis intervention and case management. In: Roberts A (ed) Crisis intervention handbook: assessment, treatment, and research, 3rd edn. Oxford University Press

Rooney RH (2010) Task-centered practice in the United States. In: Fortune AE, McCallion P, Briar-Lawson K (eds) Social work practice research for the 21st century. Columbia University Press, New York, pp 195–202

Ruben D (1998) Social exchange theory: dynamics of a system governing the dysfunctional family and guide to assessment. J Contemp Psychother 8(3):307–325

Schatz MS, Jenkins LE, Sheafor BW (1990) Milford redefined: a model of initial and advanced generalist social work [Article]. J Soc Work Educ 26(3):217–231. https://doi.org/10.1080/10437797.1990.10672154

Strean HS (1968) Some reactions of case workers to the war on poverty. J Contemp Psychother 1:43–48

Strickler M (1965) Applying crisis theory in a community clinic. Soc Casework 46:150–154

Studt E (1968) Social work theory and implication for the practice of methods. Soc Work Educ Report 16:22–46

Tolson R, Reid W, Garvin C (2003) Generalist practice: a task-centered approach, 2nd edn. Columbia University Press, New York

Trotter C (2010) Task-centred practice in Australia. In Fortune AE, McCallion P, Briar-Lawson K (Eds.), Social work practice research for the 21st century, 235–239. New York: Columbia University Press

Watzlawick P, Bervin J, Jackson D (1967) Pragmatics of human communication. W.W. Norton, New York

Download references

Author information

Authors and affiliations.

State University of New York at Albany, Albany, NY, USA

Blanca M. Ramos

State University of New York at Oswego, Oswego, NY, USA

Randall L. Stetson

You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Blanca M. Ramos .

Editor information

Editors and affiliations.

School of Human Services and Social Work, Griffith University, Meadowbrook, QLD, Australia

Dorothee Hölscher

School of Social Sciences, UNSW Sydney, Sydney, NSW, Australia

Richard Hugman

Donna McAuliffe

Rights and permissions

Reprints and permissions

Copyright information

About this entry

Cite this entry.

Ramos, B.M., Stetson, R.L. (2022). Problem-Solving Theory: The Task-Centred Model. In: Hölscher, D., Hugman, R., McAuliffe, D. (eds) Social Work Theory and Ethics. Social Work. Springer, Singapore. https://doi.org/10.1007/978-981-16-3059-0_9-1

Download citation

DOI : https://doi.org/10.1007/978-981-16-3059-0_9-1

Received : 24 December 2021

Accepted : 25 January 2022

Published : 12 April 2022

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-3059-0

Online ISBN : 978-981-16-3059-0

eBook Packages : Social Sciences Reference Module Humanities and Social Sciences Reference Module Business, Economics and Social Sciences

Publish with us

Policies and ethics

Find a journal
Track your research

What is a Problem-Solving Approach?

The expression “Problem-Solving Approach” has been the talk of the town, where the town is the business world. What is this approach and why is it so popular?

At Near Partner, we have a lot of fun. We’re not just talking about running marathons together , having ping pong matches, or just overall loving our bond as a team . What connects us all is our love for what we do. But it is not always “fun and games”. We sometimes have stressful, time-sensitive situations to deal with. Situations where our clients have a problem in hands and need it fixed yesterday .

And, if a client has a problem, that becomes our problem to solve. Time to put on our problem-solving hats and apply our problem-solving approach.

Wait… what is a “problem-solving approach”?

As you have noticed, most recruiters seek “problem solvers”. Almost all career path advisors talk about problem-solving; while some call it a process, others brand it a method, and others name it a problem-solving approach. There are plenty of books, workshops and master classes dedicated problem solving. And it ranks among one of the 5 most requested skills for software engineers .

It’s also become a go-to expression, but its meaning is quite vague. For us, problem-solving is an integral part of life. We all do it, every day, in all sorts of environments and situations.

But , you might think, if problem solving is something we all do in our daily lives, at work, at home, and even in our social interactions, isn’t this whole “problem solving approach” just a new buzzword in the business world ? Hm, not exactly.

In a business context, having a problem-solving approach to complex challenges means using a shared, collaborative, and systematic approach (or method) to solve a problem, following a structure that works for the environment you find yourself in. It delivers quicker and more efficient results and brings many advantages to the business.

The advantages of adopting a problem-solving approach

Developing and implementing a problem-solving approach—adapted to each business, of course—is not just a way to simplify solving problems. It is, in fact, a way to look at problems, and roadmap on how to tackle them. These are the main benefits of having a problem-solving approach for businesses.

Provides a solution , justifiable, and most likely reliable.
Ensures consistency . And consistency is key. Businesses that promote consistency in their processes (such as problem solving) ensure that the entire team understands the approach to be used.
It doesn’t compromise innovation . Consistency is not the opposite of innovation but rather a complement. If you are sceptical, think about this: how can anyone improve something? That’s right: by knowing exactly what works and what doesn’t.
Leads to greater objectivity . A problem-solving approach is based on data, not opinions, which eliminates bias. Also, it increases focus on a particular problem which must be solved using a predefined sequence of steps. This minimizes clutter and noise of irrelevant discussions to the problem at hand.
Promotes collaboration between co-workers, teams and management by removing divisions, many of which are also created by bias and preconceptions.
Makes decision-making easier , because it not only helps teams reach a consensus but also because the solution is backed up by data—that is, facts.

Adopting a problem-solving approach, together with an Agile mindset , will get your teams ready to tackle anything.

Our Problem-solving approach

At Near Partner, we think of ourselves as problem solvers, not task-doers. And this reflects in everything we do, from who we hire to how we recruit, and to how we treat each other in the company. Our metric for success isn’t how many lines of code we write. Not even how many good lines of code we write. Our metric for success is how many problems we solve . It is important to give the perfect answer, but only if we are answering the correct question .

Whenever we need to tackle a problem, we follow a structure that can be divided into six stages:

1. Describing and quantifying the problem

We always start with questions: What seems to be the problem here? What is our client facing? What do they need, and what have they gotten instead? We keep asking until we have identified the problem exactly.

2. Identifying the root causes of the problem

After the initial questions, we move on to, yes, more questions: Is there a technical limitation? Is the problem architectural? Or is it due to lack of communication with the development team? Is the business analysis correct?

3. Defining a prototype solution

The development of our solution to a client’s problem also starts with questions: What can we do about it? Should we throw the application away and redo the whole thing? Should we use some other software development language like .NET, Java or OutSystems?

4. Testing and evaluating

When we get our prototype solution, we test it. Is it working perfectly? If not, let’s circle back and question some more, think some more, and test it again.

5. Starting rollout

After all is done, tested and verified, we start rollout. And this does not only mean setting the network up and getting the software rolling. It also means getting the whole team of our client on board, explaining how to, when to, and where to.

6. Documenting (and saving) for future reference

And just before we wrap it up, we take away the important bits: what we’d got to work with, what we’ve done, how our solution turned out. Then we keep it for future reference, and only then, we think “mission accomplished”.

Are these six steps carved in stone? Not at all. This is a basic process we follow, but the beauty of it is our problem-solving approach allows us to identify and pursuit opportunities to innovate, and to create alternative paths and ways to solve problems.

Solved problems are our success metric

At the end of the day, we don’t count how many lines of code we wrote, or how many people worked on a specific project. We count how many problems we solved, how many clients we’ve helped, and how much we’ve learned in doing so.

Do you need help with problem-solving? Talk to us ! Our fantastic team of problem solvers (and excellent problem finders, too) can help you figure out what is wrong and deliver a solution that is just right for your and your business’ needs. Meanwhile, take a look at our success stories .

Pedro Veloso

I'm a serial entrepreneur and a (quasi-serial) father. I'm particularly fond of technology, solving problems and team culture, and my life lies at the intersection of those interests.

How to Outsource Software Development: a practical guide

The state of Nearshore

What is the Future of Work at Near Partner?

Privacy overview.

IMAGES

The 5 Steps of Problem Solving
Problem-Solving Strategies: Definition and 5 Techniques to Try
Problem Solving Process Model
6 steps problem solving process powerpoint slide
Title Page
PPT

VIDEO

How can we solve any type of problem?
Explainable AI (Counterfactuals in XAI)
Problem Solving
This Technique can solve your problem! #shaleenshrotriya #businesscoach #solution #coaching
Lecture 01: Mathematics of Generative Modelling
The SECRET To Solving Hard Problems EASILY (Framework)

COMMENTS

12 Approaches To Problem-Solving for Every Situation
Here are the seven steps of the rational approach: Define the problem. Identify possible causes. Brainstorm options to solve the problem. Select an option. Create an implementation plan. Execute the plan and monitor the results. Evaluate the solution. Read more: Effective Problem Solving Steps in the Workplace.
The Problem-Solving Process
Problem-solving is a mental process that involves discovering, analyzing, and solving problems. The ultimate goal of problem-solving is to overcome obstacles and find a solution that best resolves the issue. The best strategy for solving a problem depends largely on the unique situation. In some cases, people are better off learning everything ...
35 problem-solving techniques and methods for solving complex problems
Not every problem-solving approach is right for every challenge, and deciding on the right method for the challenge at hand is a key part of being an effective team. The Agreement Certainty matrix helps teams align on the nature of the challenges facing them. By sorting problems from simple to chaotic, your team can understand what methods are ...
What is Problem Solving? Steps, Process & Techniques
Finding a suitable solution for issues can be accomplished by following the basic four-step problem-solving process and methodology outlined below. Step. Characteristics. 1. Define the problem. Differentiate fact from opinion. Specify underlying causes. Consult each faction involved for information. State the problem specifically.
What is Problem Solving? (Steps, Techniques, Examples)
The problem-solving process typically includes the following steps: Identify the issue: Recognize the problem that needs to be solved. Analyze the situation: Examine the issue in depth, gather all relevant information, and consider any limitations or constraints that may be present. Generate potential solutions: Brainstorm a list of possible ...
Generic Approaches to Problem Analysis and Solving
Generic Approaches to Problem Analysis and Solving. Chapter. First Online: 07 May 2017. pp 83-115. Cite this chapter. Download book PDF. Rob Dekkers. 2505 Accesses. 1 Altmetric.
4 Generic Approaches to Problem Analysis and Solving
Thus, the approach to problem analysis and solving presented in this chapter supports structured problem solving; however, it does not aim at providing an exhaustive list of ... Generic Approaches to Problem Analysis and Solving 85 the formulation of rules, procedures and policies. However, programmed
The Art of Effective Problem Solving: A Step-by-Step Guide
Step 1 - Define the Problem. The definition of the problem is the first step in effective problem solving. This may appear to be a simple task, but it is actually quite difficult. This is because problems are frequently complex and multi-layered, making it easy to confuse symptoms with the underlying cause.
TRIZ
TRIZ, however, is a problem-solving philosophy based on logic, data and research, rather than on intuition. It draws on the past knowledge and ingenuity of thousands of engineers to speed up creative problem solving for project teams. Its approach brings repeatability, predictability and reliability to the problem-solving process and delivers a ...
5 Steps (And 4 Techniques) for Effective Problem Solving
4. Implement the Solution. At this stage of problem solving, be prepared for feedback, and plan for this. When you roll out the solution, request feedback on the success of the change made. 5. Review, Iterate, and Improve. Making a change shouldn't be a one time action.
The Basics of Structured Problem-Solving Methodologies: DMAIC ...
DMAIC is best suited for a complex problem, or if the risk is high. 8D is known as the Eight Disciplines of problem-solving. It consists of eight steps to solve difficult, recurring, or critical problems. The methodology consists of problem-solving tools to help you identify, correct, and eliminate the source of problems within your organization.
Adopting the right problem-solving approach
In our 2013 classic from the Quarterly, senior partner Olivier Leclerc highlights the value of taking a number of different approaches simultaneously to solve difficult problems. Read on to discover the five flexons, or problem-solving languages, that can be applied to the same problem to generate richer insights and more innovative solutions.
General Problem-solving Process
Figure 1. Steps in the General Problem-solving Process. Become aware of the problem. Define the problem. Choose the particular problem to be solved. Identify potential solutions. Evaluate the valid potential solutions to select the best one. Develop an action plan to implement the best solution.
The 3-Step Problem Solving Cycle
These short videos are meant for instructors or students wishing to give a practical framework to problem-solving. We first introduce a three-step process: ...
Problem-Solving Models: What They Are and How To Use Them
Here is a six-step process to follow when using a problem-solving model: 1. Define the problem. First, determine the problem that your team needs to solve. During this step, teams may encourage open and honest communication so everyone feels comfortable sharing their thoughts and concerns.
Workplace Problem-Solving Examples: Real Scenarios, Practical Solutions
Problem-solving in the workplace is a complex and multifaceted skill that requires a combination of analytical thinking, creativity, and effective communication. It goes beyond simply identifying problems and extends to finding innovative solutions that address the root causes. Essential Problem-Solving Skills for the Workplace
Problem Solving
6-sigma is another widely recognized problem-solving tool. It has five steps with its own acronym, DMAIC: define, measure, analyze, improve and control. The first two steps are for defining and measuring the problem. The third step is the analysis. And the fourth and fifth steps are improve and control, and address solutions.
The 7 Timeless Steps to Guide You Through Complex Problem Solving
2. Solving Complex Problems: A Generic Approach. While developing a universal solution that works in any context would be very challenging, we will describe a generic approach consisting of seven steps that will assist you in creating a bespoke method suitable to the specific context you are working in.
Effective Problem-Solving Strategies for Sales Professionals
To solve a problem, you need to identify it, conceptualize solutions, decide on the best solution and then put the solution into action. While all problem-solving strategies approach these steps differently, each step is integral to the process, so let's take a look at the four steps in detail. 1. Identify and define the problem.
Seven Steps of Generic Problem Solving And Tips and Hints for Creating
Seven Steps of Generic Problem Solving And Tips and Hints for Creating Actions at Meetings I thought I would share some work shared in the past. Many years ago, when I first embarked on World Class Tools and Techniques and becoming a Management Consultant, I thought the business world would be perfect by 2020. Phew, I got that wrong! Problems continue to plague companies and worse than that ...
Problem-Solving Theory: The Task-Centred Model
This report outlined specific steps and procedures for the problem-solving process as key components of a proposed unified generic approach to service delivery (Schatz et al. 1990). To some extent, this report laid the groundwork for the development of the social work problem-solving model by Helen Perlman .
7 Problem-Solving Skills That Can Help You Be a More ...
Problem-solving strategies can be enhanced with the application of creative techniques. You can use creativity to: Approach problems from different angles. Improve your problem-solving process. Spark creativity in your employees and peers. 6. Adaptability. Adaptability is the capacity to adjust to change. When a particular solution to an issue ...
What is a Problem-Solving Approach?
A problem-solving approach is based on data, not opinions, which eliminates bias. Also, it increases focus on a particular problem which must be solved using a predefined sequence of steps. This minimizes clutter and noise of irrelevant discussions to the problem at hand. Promotes collaboration between co-workers, teams and management by ...
Integrating Problem Solving and Research Methods ...
Developing a Generic Approach to Problem Solving From these different approaches we are now using a simple schema for problem solving visualized in 3 (a) and has 4 key stages 1. Exploring 2. Designing (Planning for Action) 3. Implementing (Taking Action) 4. Monitoring/Learning 1076 Mike Yearworth et al. / Procedia Computer Science 16 ( 2013 ...

Overview of the Problem-Solving Mental Process

Frequently Asked Questions

1. Identifying the Problem

2. Defining the Problem

3. Forming a Strategy

4. Organizing Information

5. Allocating Resources

6. Monitoring Progress

7. Evaluating the Results

A Word From Verywell​

Get Advice From The Verywell Mind Podcast

35 problem-solving techniques and methods for solving complex problems

Design your next session with SessionLab

Recommended Articles

How do you identify problems?

Complete problem-solving methods

Problem-solving warm-up activities

Tips for more effective problem solving

Clearly define the problem

Don’t jump to conclusions

Try different approaches

Don’t take it personally

Get the right people in the room

Document everything

Bring a facilitator

Develop your problem-solving skills

Design a great agenda

1. Six Thinking Hats

2. Lightning Decision Jam

3. Problem Definition Process

4. The 5 Whys

5. World Cafe

6. Discovery & Action Dialogue (DAD)

7. Design Sprint 2.0

8. Open space technology

Techniques to identify and analyze problems

10. The Creativity Dice

11. Fishbone Analysis

12. Problem Tree

13. SWOT Analysis

14. Agreement-Certainty Matrix

16. Speed Boat

17. The Journalistic Six

18. LEGO Challenge

19. What, So What, Now What?

20. Journalists

Problem-solving techniques for developing solutions

21. Mindspin

22. Improved Solutions

23. Four Step Sketch

24. 15% Solutions

25. How-Now-Wow Matrix

26. Impact and Effort Matrix

27. Dotmocracy

28. Check-in / Check-out

29. Doodling Together

30. Show and Tell

31. Constellations

32. Draw a Tree

How do I conclude a problem-solving process?

33. One Breath Feedback

34. Who What When Matrix

35. Response cards

Save time and effort discovering the right solutions

Over to you

Leave a Comment Cancel reply

Design your next workshop with SessionLab

What is Problem Solving? (Steps, Techniques, Examples)

What Is Problem Solving?

Problem-Solving Steps

Defining the Problem

Generating Solutions

Evaluating and Selecting Solutions

Implementing and Monitoring the Solution

Problem-Solving Techniques

Brainstorming

Root Cause Analysis

SWOT Analysis

Mind Mapping

Examples of Problem Solving in Various Contexts

A Word From Verywell